Mikhail Pergament
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mikhail Pergament has a total of 94 co-authors. Here are the top co-authors by number of shared publications:
- Franz Kärtner
University of Hamburg
19 shared publications - Umit Demirbas
Paul Scherrer Institut
16 shared publications Jelto Thesinga
13 shared publicationsFranz Kaertner
12 shared publicationsMartin Kellert
10 shared publications- Muharrem Kilinc
Center for Free-Electron Laser Science CFEL, Deutsches Elektronen-Synchrotron DESY, Hamburg, Germany
7 shared publications
Latest Publications
- Open Access
- 18 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (21) , 5994
Diode-pumped Yb:LLF laser with multi-watt SESAM mode locking and broad CW tuning
We demonstrate a diode-pumped Yb:LLF laser that combines multi-watt semiconductor saturable absorber mirror (SESAM) mode locking with record continuous-wave (CW) tuning. Using a compact cavity pumped by a single-emitter 10 W multimode diode at 960 nm, the laser provides up to 3.2 W CW output with a tuning range from 996 to 1073 nm and a slope efficiency of 42%. In mode-locked operation, it delivers up to 2.8 W of average power with 180 fs pulses (10.9 nJ at 257.5 MHz) in a high-power regime, and up to 570 mW with 110 fs pulses (2.6 nJ at 214.1 MHz) in a short-pulse regime. Compared to previous work, this represents more than an order-of-magnitude increase in usable mode-locked power and pulse energy together with a substantially extended CW tuning span, and we outline straightforward routes to further broaden the tuning, shorten the pulses, and scale the usable average power. Taken together with earlier results on Yb:YLF, these findings indicate that Yb:LLF can serve as a competitive sister host and a strong candidate for future high-power and cryogenic Yb-based laser and amplifier studies.
- 18 September 2026
- Published by Optica Publishing Group in Optics Letters
- Vol. 51 (21) , 5994
Open AccessDiode-pumped Yb:LLF laser with multi-watt SESAM mode locking and broad CW tuning
We demonstrate a diode-pumped Yb:LLF laser that combines multi-watt semiconductor saturable absorber mirror (SESAM) mode locking with record continuous-wave (CW) tuning. Using a compact cavity pumped by a single-emitter 10 W multimode diode at 960 nm, the laser provides up to 3.2 W CW output with a tuning range from 996 to 1073 nm and a slope efficiency of 42%. In mode-locked operation, it delivers up to 2.8 W of average power with 180 fs pulses (10.9 nJ at 257.5 MHz) in a high-power regime, and up to 570 mW with 110 fs pulses (2.6 nJ at 214.1 MHz) in a short-pulse regime. Compared to previous work, this represents more than an order-of-magnitude increase in usable mode-locked power and pulse energy together with a substantially extended CW tuning span, and we outline straightforward routes to further broaden the tuning, shorten the pulses, and scale the usable average power. Taken together with earlier results on Yb:YLF, these findings indicate that Yb:LLF can serve as a competitive sister host and a strong candidate for future high-power and cryogenic Yb-based laser and amplifier studies.
- Open Access
- 28 May 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (11) , 20724-20741
Numerical modeling and optimization of gain dynamics in Yb 3+ doped YLF and YAG cryogenically cooled amplifiers
A chromatic numerical model is presented for simulating gain dynamics in solid-state laser amplifiers. The model is based on a system of rate equations and incorporates key physical effects, including pump saturation, focused beam propagation inside the gain element, and the temperature and wavelength-dependent properties of the gain medium. By accounting for the wavelength-dependent gain, the model enables a detailed analysis of the seed pulse spectral evolution during amplification, which directly influences the duration of the Fourier-transform-limited pulse after compression. The model performance is demonstrated through simulations of cryogenically cooled amplifiers based on Yb:YLF and Yb:YAG gain materials.
- 28 May 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (11) , 20724-20741
Open AccessNumerical modeling and optimization of gain dynamics in Yb 3+ doped YLF and YAG cryogenically cooled amplifiers
A chromatic numerical model is presented for simulating gain dynamics in solid-state laser amplifiers. The model is based on a system of rate equations and incorporates key physical effects, including pump saturation, focused beam propagation inside the gain element, and the temperature and wavelength-dependent properties of the gain medium. By accounting for the wavelength-dependent gain, the model enables a detailed analysis of the seed pulse spectral evolution during amplification, which directly influences the duration of the Fourier-transform-limited pulse after compression. The model performance is demonstrated through simulations of cryogenically cooled amplifiers based on Yb:YLF and Yb:YAG gain materials.
- Open Access
- 20 April 2026
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (16)
Deterministic Fiber‐Optic Spectral Engineering Enables Three‐Color Multiplexed Two‐Photon Microscopy
Multicolor two‐photon microscopy is a powerful tool for simultaneous, high‐resolution imaging of multiple cellular structures and dynamics in complex biological systems. However, its broader adoption remains limited by the complexity of existing excitation light sources, which typically rely on multi‐laser architectures, cascaded parametric conversion schemes, or heuristic broadband fiber sources. Here, we present a deterministic, simulation‐guided spectral‐engineering framework, realized in a compact ultrafast fiber‐laser platform, that enables precise design of efficient and balanced three‐color two‐photon excitation. By systematically designing and numerically co‐optimizing a dispersion‐ and gain‐engineered Yb‐doped fiber laser with subsequent nonlinear spectral shaping in a photonic crystal fiber (PCF), we achieve controlled formation of three energetic and spectrally isolated excitation bands centered at 960, 1080, and 1175 nm. Each band delivers 2.5–5.8 nJ pulse energy with sub‐115 fs duration, well‐matched to the two‐photon excitation bands of widely used fluorescent probes, without the need for multiple laser sources or parametric conversion stages. Multiplexed two‐photon imaging of triple‐stained mouse brain, kidney, and liver tissues demonstrates robust, spectrally independent visualization of fine structures, including astrocytes, neuronal architectures, and nuclei. This work establishes deterministic nonlinear spectral engineering in fiber optics as a predictive and practical route to compact, wavelength‐flexible excitation sources for high‐performance multicolor two‐photon microscopy.
- 20 April 2026
- Published by Wiley in Laser & Photonics Reviews
- Vol. 20 (16)
Open AccessDeterministic Fiber‐Optic Spectral Engineering Enables Three‐Color Multiplexed Two‐Photon Microscopy
Multicolor two‐photon microscopy is a powerful tool for simultaneous, high‐resolution imaging of multiple cellular structures and dynamics in complex biological systems. However, its broader adoption remains limited by the complexity of existing excitation light sources, which typically rely on multi‐laser architectures, cascaded parametric conversion schemes, or heuristic broadband fiber sources. Here, we present a deterministic, simulation‐guided spectral‐engineering framework, realized in a compact ultrafast fiber‐laser platform, that enables precise design of efficient and balanced three‐color two‐photon excitation. By systematically designing and numerically co‐optimizing a dispersion‐ and gain‐engineered Yb‐doped fiber laser with subsequent nonlinear spectral shaping in a photonic crystal fiber (PCF), we achieve controlled formation of three energetic and spectrally isolated excitation bands centered at 960, 1080, and 1175 nm. Each band delivers 2.5–5.8 nJ pulse energy with sub‐115 fs duration, well‐matched to the two‐photon excitation bands of widely used fluorescent probes, without the need for multiple laser sources or parametric conversion stages. Multiplexed two‐photon imaging of triple‐stained mouse brain, kidney, and liver tissues demonstrates robust, spectrally independent visualization of fine structures, including astrocytes, neuronal architectures, and nuclei. This work establishes deterministic nonlinear spectral engineering in fiber optics as a predictive and practical route to compact, wavelength‐flexible excitation sources for high‐performance multicolor two‐photon microscopy.
- Open Access
- 1 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 51782-51798
Diode-pumped continuous-wave Yb:YVO 4 laser with a broad tuning range of 986 to 1119 nm
We present a diode-pumped continuous-wave (CW) Yb:YVO 4 laser exhibiting wavelength tunability from 986 nm to 1119 nm, corresponding to a broad tuning range of 133 nm, one of the widest reported for any Yb-doped laser host. This performance was achieved by employing a low-loss, off-surface optic-axis birefringent filter, high-quality laser crystals, and optimized low-loss cavity optics, enabling smooth and stable wavelength tuning along both principal polarization axes (E//a: 986-1084 nm and E//c: 995-1119 nm). The system delivers CW output powers up to 3.75 W, with slope and optical-to-optical efficiencies reaching 70% and 48%, respectively. These results highlight Yb:YVO 4 as an attractive gain medium for applications requiring broad tunability, compactness, and efficiency, such as ultrafast pulse generation, broadband spectroscopy, and high-energy amplifier seeding.
- 1 December 2025
- Published by Optica Publishing Group in Optics Express
- Vol. 33 (25) , 51782-51798
Open AccessDiode-pumped continuous-wave Yb:YVO 4 laser with a broad tuning range of 986 to 1119 nm
We present a diode-pumped continuous-wave (CW) Yb:YVO 4 laser exhibiting wavelength tunability from 986 nm to 1119 nm, corresponding to a broad tuning range of 133 nm, one of the widest reported for any Yb-doped laser host. This performance was achieved by employing a low-loss, off-surface optic-axis birefringent filter, high-quality laser crystals, and optimized low-loss cavity optics, enabling smooth and stable wavelength tuning along both principal polarization axes (E//a: 986-1084 nm and E//c: 995-1119 nm). The system delivers CW output powers up to 3.75 W, with slope and optical-to-optical efficiencies reaching 70% and 48%, respectively. These results highlight Yb:YVO 4 as an attractive gain medium for applications requiring broad tunability, compactness, and efficiency, such as ultrafast pulse generation, broadband spectroscopy, and high-energy amplifier seeding.
- Open Access
- 5 August 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (16) , 4890-4893
Cryogenic 750-mJ Ti:sapphire amplifier for laser plasma acceleration at a 100-Hz repetition rate
Laser plasma acceleration (LPA) is rapidly evolving from proof-of-principle experiments to stable and reliable accelerator operation. An important next step in this evolution is to increase the repetition rate to enable performance improvements through active stabilization of electron parameters using fast feedback loops. Today, laser-plasma accelerators are typically driven by Ti:sapphire lasers, but their high quantum defect and pump laser requirements limit the repetition rate and average power. Here, we present a Ti:sapphire laser system that pushes these limits and delivers 750 mJ laser pulses at a repetition rate of 100 Hz and a spectrum that supports sub-30 fs duration. High beam quality is achieved by careful thermal management and control of thermal lensing in the cryogenically cooled amplifier crystal.
- 5 August 2025
- Published by Optica Publishing Group in Optics Letters
- Vol. 50 (16) , 4890-4893
Open AccessCryogenic 750-mJ Ti:sapphire amplifier for laser plasma acceleration at a 100-Hz repetition rate
Laser plasma acceleration (LPA) is rapidly evolving from proof-of-principle experiments to stable and reliable accelerator operation. An important next step in this evolution is to increase the repetition rate to enable performance improvements through active stabilization of electron parameters using fast feedback loops. Today, laser-plasma accelerators are typically driven by Ti:sapphire lasers, but their high quantum defect and pump laser requirements limit the repetition rate and average power. Here, we present a Ti:sapphire laser system that pushes these limits and delivers 750 mJ laser pulses at a repetition rate of 100 Hz and a spectrum that supports sub-30 fs duration. High beam quality is achieved by careful thermal management and control of thermal lensing in the cryogenically cooled amplifier crystal.
- Open Access
Multiplexed Brain and Visceral Two-Photon Imaging Using a Simulation-Guided Ultrafast Three-Color Fiber Laser
Multicolor two-photon microscopy is an essential tool in modern life sciences, enabling simultaneous, high-resolution imaging of multiple cellular structures and dynamic processes within complex biomedical systems. Realizing its full potential demands light sources that combine multiplexed spectral flexibility, high pulse quality, and practical implementation for efficient excitation of diverse cellular targets. Here, we present a novel ultrafast fiber laser platform that enables efficient three-color multiplexed two-photon imaging through numerically optimized nonlinear spectral shaping in a photonic crystal fiber (PCF). The system is driven by a nonlinear Yb-doped fiber amplifier with tailored dispersion and gain characteristics to generate clean sub-50 fs pulses at 1030 nm with over 40 nJ pulse energy. Subsequent, simulation-guided PCF-based spectral broadening enables controlled formation of three distinct high-energy bands centered at 940 nm, 1,080 nm, and 1,175 nm, overlapping with key fluorescent probes and biomolecular markers. The resulting pulses, isolated with high spectral and time-domain pulse quality, provide sub-115 fs duration and 2.5 - 6 nJ energy per channel. Multiplexed imaging is validated in labeled mouse brain, kidney, and liver tissue slices using spectrally independent multi-fluorophore targeting to visualize e.g., astrocytes, neuronal structures, and nuclei in triple-stained mouse hippocampus. The demonstrated fiber-optic laser platform provides a practical alternative to conventional single-color sources and more complex multi-laser systems, supporting robust and high-resolution three-color two-photon imaging for a range of biomedical applications.
Open AccessMultiplexed Brain and Visceral Two-Photon Imaging Using a Simulation-Guided Ultrafast Three-Color Fiber Laser
Multicolor two-photon microscopy is an essential tool in modern life sciences, enabling simultaneous, high-resolution imaging of multiple cellular structures and dynamic processes within complex biomedical systems. Realizing its full potential demands light sources that combine multiplexed spectral flexibility, high pulse quality, and practical implementation for efficient excitation of diverse cellular targets. Here, we present a novel ultrafast fiber laser platform that enables efficient three-color multiplexed two-photon imaging through numerically optimized nonlinear spectral shaping in a photonic crystal fiber (PCF). The system is driven by a nonlinear Yb-doped fiber amplifier with tailored dispersion and gain characteristics to generate clean sub-50 fs pulses at 1030 nm with over 40 nJ pulse energy. Subsequent, simulation-guided PCF-based spectral broadening enables controlled formation of three distinct high-energy bands centered at 940 nm, 1,080 nm, and 1,175 nm, overlapping with key fluorescent probes and biomolecular markers. The resulting pulses, isolated with high spectral and time-domain pulse quality, provide sub-115 fs duration and 2.5 - 6 nJ energy per channel. Multiplexed imaging is validated in labeled mouse brain, kidney, and liver tissue slices using spectrally independent multi-fluorophore targeting to visualize e.g., astrocytes, neuronal structures, and nuclei in triple-stained mouse hippocampus. The demonstrated fiber-optic laser platform provides a practical alternative to conventional single-color sources and more complex multi-laser systems, supporting robust and high-resolution three-color two-photon imaging for a range of biomedical applications.
- Open Access
Deep-Tissue Two-Photon Brain Imaging Enabled by a Tunable Fiber-Optic Dispersive Wave Generator
Here, we present a fiber-optic dispersive wave generator for highly-efficient, wavelength-tunable ultrashort pulse generation, enabling multicolor deep-tissue two-photon imaging of neuronal and vascular structures in labeled mouse brain. Guided by comprehensive numerical simulations, a compact Yb:fiber laser-driven system is constructed that utilizes precisely parameter- and phase-matching-controlled dispersive wave generation in a photonic crystal fiber. The system delivers sub-100 fs pulses with over ∼6.7 nJ of energy across a continuously tunable spectral range of 880–950 nm, achieving a record-high optical conversion efficiency of up to 65%. Optimizing the output for two-photon excitation of enhanced Green Fluorescent Protein and SYTOX Orange enables high-resolution structural imaging in mouse hippocampus and cerebellum at depths exceeding 450 µm. This technique for wavelength-tunable, high-energy and ultrashort pulse generation with record optical efficiency represents a significant advancement in ultrafast fiber laser technology for versatile biomedical two-photon imaging applications.
Open AccessDeep-Tissue Two-Photon Brain Imaging Enabled by a Tunable Fiber-Optic Dispersive Wave Generator
Here, we present a fiber-optic dispersive wave generator for highly-efficient, wavelength-tunable ultrashort pulse generation, enabling multicolor deep-tissue two-photon imaging of neuronal and vascular structures in labeled mouse brain. Guided by comprehensive numerical simulations, a compact Yb:fiber laser-driven system is constructed that utilizes precisely parameter- and phase-matching-controlled dispersive wave generation in a photonic crystal fiber. The system delivers sub-100 fs pulses with over ∼6.7 nJ of energy across a continuously tunable spectral range of 880–950 nm, achieving a record-high optical conversion efficiency of up to 65%. Optimizing the output for two-photon excitation of enhanced Green Fluorescent Protein and SYTOX Orange enables high-resolution structural imaging in mouse hippocampus and cerebellum at depths exceeding 450 µm. This technique for wavelength-tunable, high-energy and ultrashort pulse generation with record optical efficiency represents a significant advancement in ultrafast fiber laser technology for versatile biomedical two-photon imaging applications.
- Open Access
- 21 October 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (11) , 2644-2667
Advantages of pulse-train excitation in narrow-band terahertz generation: mitigation of undesired nonlinear effects
In this work, we have studied the limitations of narrowband multi-cycle (MC) terahertz (THz) generation via optical rectification (OR) in periodically poled lithium niobate (PPLN) crystals. Detailed investigation of the transmitted beam profile, THz conversion efficiency (CE), and parasitic second-harmonic generation (SHG) strength as a function of incident pump beam size showed that Kerr-lensing is a significant bottleneck in the efficiency scaling of MC THz generation. We have also demonstrated that compared to the usage of a single pump pulse, excitation of the PPLN crystal via a pulse train, not only boosts up THz CE and narrows down the bandwidth of the achieved THz beam but also helps to mitigate the effect of undesired nonlinearities, such as Kerr-lensing and parasitic SHG.
- 21 October 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (11) , 2644-2667
Open AccessAdvantages of pulse-train excitation in narrow-band terahertz generation: mitigation of undesired nonlinear effects
In this work, we have studied the limitations of narrowband multi-cycle (MC) terahertz (THz) generation via optical rectification (OR) in periodically poled lithium niobate (PPLN) crystals. Detailed investigation of the transmitted beam profile, THz conversion efficiency (CE), and parasitic second-harmonic generation (SHG) strength as a function of incident pump beam size showed that Kerr-lensing is a significant bottleneck in the efficiency scaling of MC THz generation. We have also demonstrated that compared to the usage of a single pump pulse, excitation of the PPLN crystal via a pulse train, not only boosts up THz CE and narrows down the bandwidth of the achieved THz beam but also helps to mitigate the effect of undesired nonlinearities, such as Kerr-lensing and parasitic SHG.
- Open Access
- 15 October 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (22) , 39460-39468
44-fs, 1-MHz, 70-µJ Yb-doped fiber laser system for high harmonic generation
We report the development of a robust Yb-doped fiber laser system based on chirped-pulse amplification (CPA), generating 44-fs laser pulses with up to 70-µJ pulse energy at a 1-MHz repetition rate. It consists of a Yb-doped nonlinear polarization evolution (NPE) mode-locked fiber oscillator, a chirped fiber Bragg grating (CFBG) stretcher, a wave-shaper for manipulating the spectrum of the signal, cascaded fiber amplifiers, and two compression units. The output pulse duration of 44 fs for efficient high harmonic generation (HHG) was achieved by a multi-pass multi-plate Herriott-type non-linear compression unit.
- 15 October 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (22) , 39460-39468
Open Access44-fs, 1-MHz, 70-µJ Yb-doped fiber laser system for high harmonic generation
We report the development of a robust Yb-doped fiber laser system based on chirped-pulse amplification (CPA), generating 44-fs laser pulses with up to 70-µJ pulse energy at a 1-MHz repetition rate. It consists of a Yb-doped nonlinear polarization evolution (NPE) mode-locked fiber oscillator, a chirped fiber Bragg grating (CFBG) stretcher, a wave-shaper for manipulating the spectrum of the signal, cascaded fiber amplifiers, and two compression units. The output pulse duration of 44 fs for efficient high harmonic generation (HHG) was achieved by a multi-pass multi-plate Herriott-type non-linear compression unit.
- Open Access
- 11 September 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (18) , 5236-5239
Pushing the tuning limits of femtosecond Yb-based solid-state lasers to 1 µm: a Yb:YVO4 laser tunable down to 1004 nm
We have obtained what we believe to be the shortest fs tuning wavelength (1004 nm) from a Yb-based solid-state laser system. As the working horse, we have chosen Yb:YVO4 due to its blueshifted gain spectrum. While using a single 10 W 952 nm diode for pumping and a semiconductor saturable absorber mirror (SESAM) for mode-locking, we have achieved 266 fs long pulses with up to 1.24 W of output power around 1021 nm. Using an intracavity birefringent filter, the central wavelength of the fs pulses could be tuned smoothly between 1004–1038 nm and 1009–1061 nm while employing the E//a and E//c axis of the material, respectively. By using an additional hard aperture to increase the modulation depth, we have also attained 100 fs level pulses in the 1012.5–1019 nm range, which shows the suitability of the system in seeding cryogenic Yb:YLF-based amplifiers.
- 11 September 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (18) , 5236-5239
Open AccessPushing the tuning limits of femtosecond Yb-based solid-state lasers to 1 µm: a Yb:YVO4 laser tunable down to 1004 nm
We have obtained what we believe to be the shortest fs tuning wavelength (1004 nm) from a Yb-based solid-state laser system. As the working horse, we have chosen Yb:YVO4 due to its blueshifted gain spectrum. While using a single 10 W 952 nm diode for pumping and a semiconductor saturable absorber mirror (SESAM) for mode-locking, we have achieved 266 fs long pulses with up to 1.24 W of output power around 1021 nm. Using an intracavity birefringent filter, the central wavelength of the fs pulses could be tuned smoothly between 1004–1038 nm and 1009–1061 nm while employing the E//a and E//c axis of the material, respectively. By using an additional hard aperture to increase the modulation depth, we have also attained 100 fs level pulses in the 1012.5–1019 nm range, which shows the suitability of the system in seeding cryogenic Yb:YLF-based amplifiers.