Jianhua Qian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Jianhua Qian has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Junhua Li
College of Petrochemical Engineering, Liaoning Petrochemical University, Fushun 113001, China
6 shared publications Junhua Li
College of Petrochemical Engineering Liaoning Petrochemical University Fushun Liaoning China
4 shared publications- Ruijun Zhang
College of Chemistry and Chemical Engineering, China University of Petroleum (East China), Qingdao 266555, China
4 shared publications - Yuexin Hu
College of Petrochemical Engineering, Liaoning Petrochemical University, Fushun 113001, China
4 shared publications - Qiqi He
College of Chemistry and Chemical Engineering, China University of Petroleum (East China), Qingdao 266555, China
3 shared publications - Yanan Wang
School of Petrochemical Engineering, Liaoning Petrochemical University, Fushun 113001, China
3 shared publications
Latest Publications
- 4 June 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (34) , e70969
Effect of Rubber‐to‐Plastic Ratio on POE / HDPE Thermoplastic Vulcanizates Prepared by Dynamic Vulcanization
Thermoplastic vulcanizates (TPVs) are attracting growing interest for their recyclability, low cost, and ease of processing. While polypropylene‐based TPVs are well studied and partly commercialized, polyethylene‐based systems remain underexplored. Polypropylene tends to degrade during dynamic vulcanization due to its tertiary carbon atoms, requiring stabilizers and complicating processing. In contrast, polyethylene offers better thermal stability and simpler processing, making it a promising alternative for developing cost‐effective and high‐performance TPVs. In this study, a series of TPVs based on polyolefin elastomer (POE) and high‐density polyethylene (HDPE) were prepared via dynamic vulcanization using 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane (DBPH) as a crosslinking agent under optimized conditions. The effects of varying rubber‐to‐plastic ratios on the mechanical, rheological, and thermal properties were systematically investigated. As the POE content increased, torque and gel content rose, while melting/crystallization temperatures and crystallinity decreased. At a rubber‐to‐plastic ratio of 80:20, the TPV exhibited the best overall performance, with a tensile strength of 4.8 MPa, elongation at break of 282%, and hysteresis loss of 55%. Rheological measurements revealed strong crosslinked networks and good processability under shear. This study demonstrates the significant influence of rubber‐to‐plastic ratio on TPV properties and offers a practical route to developing high‐performance, polyethylene‐based thermoplastic elastomers.
- 4 June 2026
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 143 (34) , e70969
Effect of Rubber‐to‐Plastic Ratio on POE / HDPE Thermoplastic Vulcanizates Prepared by Dynamic Vulcanization
Thermoplastic vulcanizates (TPVs) are attracting growing interest for their recyclability, low cost, and ease of processing. While polypropylene‐based TPVs are well studied and partly commercialized, polyethylene‐based systems remain underexplored. Polypropylene tends to degrade during dynamic vulcanization due to its tertiary carbon atoms, requiring stabilizers and complicating processing. In contrast, polyethylene offers better thermal stability and simpler processing, making it a promising alternative for developing cost‐effective and high‐performance TPVs. In this study, a series of TPVs based on polyolefin elastomer (POE) and high‐density polyethylene (HDPE) were prepared via dynamic vulcanization using 2,5‐dimethyl‐2,5‐di(tert‐butylperoxy)hexane (DBPH) as a crosslinking agent under optimized conditions. The effects of varying rubber‐to‐plastic ratios on the mechanical, rheological, and thermal properties were systematically investigated. As the POE content increased, torque and gel content rose, while melting/crystallization temperatures and crystallinity decreased. At a rubber‐to‐plastic ratio of 80:20, the TPV exhibited the best overall performance, with a tensile strength of 4.8 MPa, elongation at break of 282%, and hysteresis loss of 55%. Rheological measurements revealed strong crosslinked networks and good processability under shear. This study demonstrates the significant influence of rubber‐to‐plastic ratio on TPV properties and offers a practical route to developing high‐performance, polyethylene‐based thermoplastic elastomers.
- Open Access
- 9 May 2026
- Published by Elsevier in SSRN Electronic Journal
Green Reduction and Fluorocarbon-Assisted Dispersion of Graphene Oxide for High-Performance Anticorrosive and Hydrophobic Epoxy Coatings
This study employed a reduction process to selectively retain specific functional groups on the surface of graphene oxide (GO), followed by modification with 3-aminopropyltriethoxysilane to enhance its dispersion performance in epoxy resin (EP) coating. Based on the cationic property of quaternary ammonium salt, two different salts (imidazoline quaternary ammonium salt and quaternary ammonium salt cationic fluorocarbon surfactant) were screened and added to promote their adsorption on the surface of modified graphene (KrGO), further improving its dispersion performance in the coating. The reduced graphene oxide (rGO) was characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. The performances of the composite coating were evaluated by electrochemical method, UV aging test, hardness measurement and hydrophilic/hydrophobic properties. The results showed that in the reduction process, when the temperature was 80 °C, the reaction time was 6 h, and the amount of reducing agent was 0.2 g (the mass ratio of GO to ascorbic acid was 1: 10), the C/O ratio of rGO increased from 1.66 to 6.84. The indentation edge of the coating (FKrGO/EP) prepared by the fluorine-containing surfactant as a composite modifier was more regular and the maximum hardness was 39.27 HV. After 12 h of UV irradiation, the surface retained unchanged. After immersion in 3.5% NaCl solution, the FKrGO/EP coating showed the maximum impedance modulus and the lowest corrosion current density. Due to the low surface energy of the exposed fluorocarbon chain, the FKrGO/EP coating had the best hydrophobic property. The above research illustrates that the FKrGO/EP coating has the best anti-corrosion, anti-ultraviolet and mechanical properties, and is especially suitable for solving the problem of anti-corrosion durability and electrostatic conductivity of containers during oil transportation.
- 9 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessGreen Reduction and Fluorocarbon-Assisted Dispersion of Graphene Oxide for High-Performance Anticorrosive and Hydrophobic Epoxy Coatings
This study employed a reduction process to selectively retain specific functional groups on the surface of graphene oxide (GO), followed by modification with 3-aminopropyltriethoxysilane to enhance its dispersion performance in epoxy resin (EP) coating. Based on the cationic property of quaternary ammonium salt, two different salts (imidazoline quaternary ammonium salt and quaternary ammonium salt cationic fluorocarbon surfactant) were screened and added to promote their adsorption on the surface of modified graphene (KrGO), further improving its dispersion performance in the coating. The reduced graphene oxide (rGO) was characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. The performances of the composite coating were evaluated by electrochemical method, UV aging test, hardness measurement and hydrophilic/hydrophobic properties. The results showed that in the reduction process, when the temperature was 80 °C, the reaction time was 6 h, and the amount of reducing agent was 0.2 g (the mass ratio of GO to ascorbic acid was 1: 10), the C/O ratio of rGO increased from 1.66 to 6.84. The indentation edge of the coating (FKrGO/EP) prepared by the fluorine-containing surfactant as a composite modifier was more regular and the maximum hardness was 39.27 HV. After 12 h of UV irradiation, the surface retained unchanged. After immersion in 3.5% NaCl solution, the FKrGO/EP coating showed the maximum impedance modulus and the lowest corrosion current density. Due to the low surface energy of the exposed fluorocarbon chain, the FKrGO/EP coating had the best hydrophobic property. The above research illustrates that the FKrGO/EP coating has the best anti-corrosion, anti-ultraviolet and mechanical properties, and is especially suitable for solving the problem of anti-corrosion durability and electrostatic conductivity of containers during oil transportation.
- Open Access
High-Pressure Phase Behavior of α-Olefin + n-Hexane + Ethylene/1-Octene Copolymer Systems: Experimental Study and Modeling
Accurate knowledge of phase behavior in polyolefin–solvent mixtures is critical for ensuring stable operation and safe scale-up of industrial solution polymerization processes. The binary (n-hexane + ethylene/1-octene copolymer, POE96k-10) and ternary (α-olefin + n-hexane + POE96k-10) phase behaviors were investigated via a visual high-pressure cell (POE96k-10: Mw = 96 kg·mol–1, Mw/Mn = 3.87, 1-octene mole fraction = 10.31 mol%) at temperatures of 380~480 K and pressures as high as 14 MPa. To systematically analyze the effects of α-olefin mass fraction and type on phase transition, four industrially relevant α-olefins (ethylene, 1-butene, 1-hexene, and 1-octene) were investigated. The results show that the phase transition temperature and pressure for liquid–liquid and liquid–vapor transitions show an approximately linear dependence on α-olefin mass fraction. Ethylene, 1-butene, and 1-hexene lower the phase transition temperature, whereas 1-octene increases it. Ethylene exhibits a strong anti-solvent effect, significantly lowering the transition temperature while increasing the phase transition pressure. The modified Sanchez-Lacombe equation of state (MSL EOS) effectively correlates and reproduces the phase equilibrium data of the α-olefin + n-hexane + POE96k-10 ternary systems, though its accuracy decreases with increasing α-olefin chain length.
Open AccessHigh-Pressure Phase Behavior of α-Olefin + n-Hexane + Ethylene/1-Octene Copolymer Systems: Experimental Study and Modeling
Accurate knowledge of phase behavior in polyolefin–solvent mixtures is critical for ensuring stable operation and safe scale-up of industrial solution polymerization processes. The binary (n-hexane + ethylene/1-octene copolymer, POE96k-10) and ternary (α-olefin + n-hexane + POE96k-10) phase behaviors were investigated via a visual high-pressure cell (POE96k-10: Mw = 96 kg·mol–1, Mw/Mn = 3.87, 1-octene mole fraction = 10.31 mol%) at temperatures of 380~480 K and pressures as high as 14 MPa. To systematically analyze the effects of α-olefin mass fraction and type on phase transition, four industrially relevant α-olefins (ethylene, 1-butene, 1-hexene, and 1-octene) were investigated. The results show that the phase transition temperature and pressure for liquid–liquid and liquid–vapor transitions show an approximately linear dependence on α-olefin mass fraction. Ethylene, 1-butene, and 1-hexene lower the phase transition temperature, whereas 1-octene increases it. Ethylene exhibits a strong anti-solvent effect, significantly lowering the transition temperature while increasing the phase transition pressure. The modified Sanchez-Lacombe equation of state (MSL EOS) effectively correlates and reproduces the phase equilibrium data of the α-olefin + n-hexane + POE96k-10 ternary systems, though its accuracy decreases with increasing α-olefin chain length.
- Open Access
(Substituted-quinoline-1-yl) Methylbenzylammonium Chloride: Quaternization Reaction Process, Corrosion Inhibition Behavior, and Calculation Process
In this paper, three quinoline-based quaternary ammonium salts were successfully synthesized, with quinoline, 8-hydroxyquinoline, and 8-methoxyquinoline used as raw materials, and benzyl chloride as a quaternization reagent. The as-synthesized quaternary ammonium salts showed excellent corrosion inhibition performance in the acidic environment based on the derivative’s cationic activity, heteroatom electron effect, and conjugated aromatic system. Specifically, the methoxy-containing product exhibited the highest corrosion inhibition efficiency of 96.92%. The quantitative calculation analysis demonstrated that the addition of methoxy and hydroxyl groups facilitated the quaternization reaction and enhanced the adsorption of the quaternary ammonium salts on the metal surface. The molecular dynamics study indicated that the three corrosion inhibitors adsorbed on the metal surface in a parallel orientation. This study has a certain reference significance for the research and development of quaternary ammonium salt as corrosion inhibitors in an acidic environment.
Open Access(Substituted-quinoline-1-yl) Methylbenzylammonium Chloride: Quaternization Reaction Process, Corrosion Inhibition Behavior, and Calculation Process
In this paper, three quinoline-based quaternary ammonium salts were successfully synthesized, with quinoline, 8-hydroxyquinoline, and 8-methoxyquinoline used as raw materials, and benzyl chloride as a quaternization reagent. The as-synthesized quaternary ammonium salts showed excellent corrosion inhibition performance in the acidic environment based on the derivative’s cationic activity, heteroatom electron effect, and conjugated aromatic system. Specifically, the methoxy-containing product exhibited the highest corrosion inhibition efficiency of 96.92%. The quantitative calculation analysis demonstrated that the addition of methoxy and hydroxyl groups facilitated the quaternization reaction and enhanced the adsorption of the quaternary ammonium salts on the metal surface. The molecular dynamics study indicated that the three corrosion inhibitors adsorbed on the metal surface in a parallel orientation. This study has a certain reference significance for the research and development of quaternary ammonium salt as corrosion inhibitors in an acidic environment.
- Open Access
Synthesis of Amido-Quinoline-Based Hafnium and Zirconium Complexes and Their Catalytic Properties for Ethylene/1-Octene Copolymerization
The development of polyolefin catalysts plays a pivotal role in driving advancements within the polyolefin industry. In this study, five ligands (L1–L5) and six Hf (Hf 1-5) and Zr (Zr-1) metal complexes with amido-quinoline-based ligands were successfully synthesized by a simple and efficient synthetic route. The new Hf (Hf 1-5) and Zr (Zr-1) complexes exhibit high thermal stability, moderate activity, and excellent 1-octene incorporation capability. As a result, they have been successfully utilized in high-temperature solution-phase polymerization to produce polyolefin elastomers (POEs). The electron-donating effect of the ligand was identified as a crucial factor contributing to the improved catalytic performance and comonomer incorporation capability. The steric effects of substituents on the ligand have little impact on the olefin copolymerization activity, molecular weight, and comonomer incorporation capability. The Hf-1 complex demonstrates outstanding copolymerization activity and comonomer incorporation (8.3 × 106 g polymer/(mol catalyst · h), 26 wt%), offering significant potential for large-scale operations and practical applications.
Open AccessSynthesis of Amido-Quinoline-Based Hafnium and Zirconium Complexes and Their Catalytic Properties for Ethylene/1-Octene Copolymerization
The development of polyolefin catalysts plays a pivotal role in driving advancements within the polyolefin industry. In this study, five ligands (L1–L5) and six Hf (Hf 1-5) and Zr (Zr-1) metal complexes with amido-quinoline-based ligands were successfully synthesized by a simple and efficient synthetic route. The new Hf (Hf 1-5) and Zr (Zr-1) complexes exhibit high thermal stability, moderate activity, and excellent 1-octene incorporation capability. As a result, they have been successfully utilized in high-temperature solution-phase polymerization to produce polyolefin elastomers (POEs). The electron-donating effect of the ligand was identified as a crucial factor contributing to the improved catalytic performance and comonomer incorporation capability. The steric effects of substituents on the ligand have little impact on the olefin copolymerization activity, molecular weight, and comonomer incorporation capability. The Hf-1 complex demonstrates outstanding copolymerization activity and comonomer incorporation (8.3 × 106 g polymer/(mol catalyst · h), 26 wt%), offering significant potential for large-scale operations and practical applications.
- Open Access
Impact of Hexyl Branch Content on the Mechanical Properties and Deformation Mechanisms of Amorphous Ethylene/1-Octene Copolymers: A Molecular Dynamics Study
Ethylene/1-octene copolymers exhibit enhanced flexibility and impact resistance compared to polyethylene, which makes them well suited for applications in advanced plastics and elastomers. United-atom molecular dynamics (MD) simulations were conducted to explore the mechanical behavior and deformation mechanisms of ethylene/1-octene copolymers under uniaxial tensile loading. This study systematically examined the influence of temperature, polymer chain length, chain quantity, and strain rate, with a specific focus on how hexyl branch content impacts the mechanical properties of amorphous ethylene/1-octene copolymers. The simulation results indicate that as the branch content increases, the yield strength and elastic modulus decrease, suggesting a trade-off between flexibility and mechanical strength. Energy decomposition analysis reveals that copolymers with more branched chains undergo greater changes in van der Waals energy. Additionally, as the branch content increases, the reduction in dihedral angle energy in the strain hardening region becomes more gradual, and the rate and the extent of the transition of dihedral angles from gauche to trans conformation decrease under deformation. Ethylene/1-octene copolymers exhibit higher chain entanglement parameters compared to linear polyethylene, with these parameters increasing as the branch content rises. Moreover, increasing the branch content results in a less pronounced increase in chain orientation along the loading direction.
Open AccessImpact of Hexyl Branch Content on the Mechanical Properties and Deformation Mechanisms of Amorphous Ethylene/1-Octene Copolymers: A Molecular Dynamics Study
Ethylene/1-octene copolymers exhibit enhanced flexibility and impact resistance compared to polyethylene, which makes them well suited for applications in advanced plastics and elastomers. United-atom molecular dynamics (MD) simulations were conducted to explore the mechanical behavior and deformation mechanisms of ethylene/1-octene copolymers under uniaxial tensile loading. This study systematically examined the influence of temperature, polymer chain length, chain quantity, and strain rate, with a specific focus on how hexyl branch content impacts the mechanical properties of amorphous ethylene/1-octene copolymers. The simulation results indicate that as the branch content increases, the yield strength and elastic modulus decrease, suggesting a trade-off between flexibility and mechanical strength. Energy decomposition analysis reveals that copolymers with more branched chains undergo greater changes in van der Waals energy. Additionally, as the branch content increases, the reduction in dihedral angle energy in the strain hardening region becomes more gradual, and the rate and the extent of the transition of dihedral angles from gauche to trans conformation decrease under deformation. Ethylene/1-octene copolymers exhibit higher chain entanglement parameters compared to linear polyethylene, with these parameters increasing as the branch content rises. Moreover, increasing the branch content results in a less pronounced increase in chain orientation along the loading direction.
- Open Access
The Effect of Feeding Sequence on the Structure and Properties of the Ethylene/1-Octene Copolymer in the Semi-Continuous Polymerization Reaction System
The performance of ethylene/1-octene copolymer primarily depends on the microstructure of the polymer chain. This study employed a new method to control the inter-distribution of hexyl chain branches directly on the backbone of the ethylene/1-octene copolymer. Three ethylene/1-octene copolymers with different inter-distributions of hexyl chain branches were synthesized using [Me2Si(C5Me4) (NtBu)] TiCl2 (Ti–CGC) by different feeding sequences in the semi-continuous polymerization reaction system. The three copolymers were named according to the feeding sequence of the materials: ethylene/1-octene/Ti–CGC (EOC), 1-octene/Ti–CGC/ethylene (OCE), and ethylene/Ti–CGC/1-octene (ECO), respectively. The structure and properties of the copolymers were characterized using HT-GPC, 13C-NMR, DSC, WAXD, DMA, MI, and Uniaxial Tension Test. The results showed that the feeding sequence greatly affected the comonomer distribution of the molecular chains, molecular weight, molecular weight distribution, and chemical composition of the copolymers, consequently influencing their thermal performance and mechanical properties. Thus, it is probable that one could obtain an ethylene/1-octene copolymer with designed properties by controlling the feeding sequence during the ethylene/1-octene semi-continuous copolymerization process.
Open AccessThe Effect of Feeding Sequence on the Structure and Properties of the Ethylene/1-Octene Copolymer in the Semi-Continuous Polymerization Reaction System
The performance of ethylene/1-octene copolymer primarily depends on the microstructure of the polymer chain. This study employed a new method to control the inter-distribution of hexyl chain branches directly on the backbone of the ethylene/1-octene copolymer. Three ethylene/1-octene copolymers with different inter-distributions of hexyl chain branches were synthesized using [Me2Si(C5Me4) (NtBu)] TiCl2 (Ti–CGC) by different feeding sequences in the semi-continuous polymerization reaction system. The three copolymers were named according to the feeding sequence of the materials: ethylene/1-octene/Ti–CGC (EOC), 1-octene/Ti–CGC/ethylene (OCE), and ethylene/Ti–CGC/1-octene (ECO), respectively. The structure and properties of the copolymers were characterized using HT-GPC, 13C-NMR, DSC, WAXD, DMA, MI, and Uniaxial Tension Test. The results showed that the feeding sequence greatly affected the comonomer distribution of the molecular chains, molecular weight, molecular weight distribution, and chemical composition of the copolymers, consequently influencing their thermal performance and mechanical properties. Thus, it is probable that one could obtain an ethylene/1-octene copolymer with designed properties by controlling the feeding sequence during the ethylene/1-octene semi-continuous copolymerization process.
- Open Access
- 5 December 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (24) , 3087
Facile Fabrication of Nickel Supported on Reduced Graphene Oxide Composite for Oxygen Reduction Reaction
Due to the depletion of fossil fuels, the demand for renewable energy has increased, thus stimulating the development of novel materials for energy conversion devices such as fuel cells. In this work, nickel nanoparticles loaded on reduced graphene oxide (Ni/rGO) with small size and good dispersibility were successfully prepared by controlling the pyrolysis temperature of the precursor at 450 °C, assisted by a microwave-assisted hydrothermal method, and exhibited enhanced electrocatalytic activity towards oxygen reduction reaction (ORR). Additionally, the electron enrichment on Ni NPs was due to charge transfer from the rGO support to metal nickel, as evidenced by both experimental and theoretical studies. Metal–support interactions between nickel and the rGO support also facilitated charge transfer, contributing to the enhanced ORR performance of the composite material. DFT calculations revealed that the first step (from O2 to HOO*) was the rate-determining step with an RDS energy barrier lower than that of the Pt(111), indicating favorable ORR kinetics. The HOO* intermediates can be transferred onto rGO by the solid-phase spillover effect, which reduces the chemical adsorption on the nickel surface, thereby allowing continuous regeneration of active nickel sites. The HO2− intermediates generated on the surface of rGO by 2e− reduction can also efficiently diffuse towards the nearby Ni surface or the interface of Ni/rGO, where they can be further rapidly reduced to OH−. This mechanism acts as the pseudo-four-electron path on the RRDE. Furthermore, Ni/rGO-450 demonstrated superior stability, methanol tolerance, and durability compared to a 20 wt% Pt/C catalyst, making it a cost-effective alternative to conventional noble metal ORR catalysts for fuel cells or metal–air batteries.
- 5 December 2023
- Published by MDPI AG in Nanomaterials
- Vol. 13 (24) , 3087
Open AccessFacile Fabrication of Nickel Supported on Reduced Graphene Oxide Composite for Oxygen Reduction Reaction
Due to the depletion of fossil fuels, the demand for renewable energy has increased, thus stimulating the development of novel materials for energy conversion devices such as fuel cells. In this work, nickel nanoparticles loaded on reduced graphene oxide (Ni/rGO) with small size and good dispersibility were successfully prepared by controlling the pyrolysis temperature of the precursor at 450 °C, assisted by a microwave-assisted hydrothermal method, and exhibited enhanced electrocatalytic activity towards oxygen reduction reaction (ORR). Additionally, the electron enrichment on Ni NPs was due to charge transfer from the rGO support to metal nickel, as evidenced by both experimental and theoretical studies. Metal–support interactions between nickel and the rGO support also facilitated charge transfer, contributing to the enhanced ORR performance of the composite material. DFT calculations revealed that the first step (from O2 to HOO*) was the rate-determining step with an RDS energy barrier lower than that of the Pt(111), indicating favorable ORR kinetics. The HOO* intermediates can be transferred onto rGO by the solid-phase spillover effect, which reduces the chemical adsorption on the nickel surface, thereby allowing continuous regeneration of active nickel sites. The HO2− intermediates generated on the surface of rGO by 2e− reduction can also efficiently diffuse towards the nearby Ni surface or the interface of Ni/rGO, where they can be further rapidly reduced to OH−. This mechanism acts as the pseudo-four-electron path on the RRDE. Furthermore, Ni/rGO-450 demonstrated superior stability, methanol tolerance, and durability compared to a 20 wt% Pt/C catalyst, making it a cost-effective alternative to conventional noble metal ORR catalysts for fuel cells or metal–air batteries.