Qiqi He
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Qiqi He has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Jianhua Qian
College of Petrochemical Engineering, Liaoning Petrochemical University, Fushun 113001, China
3 shared publications - Junhua Li
College of Petrochemical Engineering, Liaoning Petrochemical University, Fushun 113001, China
3 shared publications - Ruijun Zhang
College of Chemistry and Chemical Engineering, China University of Petroleum (East China), Qingdao 266555, China
3 shared publications - Yuexin Hu
College of Petrochemical Engineering, Liaoning Petrochemical University, Fushun 113001, China
3 shared publications - Hongbo Yu
PetroChina Fushun Petrochemical, Fushun 113001, China
2 shared publications - Yong Zheng
State Key Laboratory of Catalysis, Power Battery & Systems Research Center, Dalian Institute of Chemical Physics Chinese Academy of Sciences Dalian China
1 shared publication
Latest Publications
- Open Access
High-Pressure Phase Behavior of α-Olefin + n-Hexane + Ethylene/1-Octene Copolymer Systems: Experimental Study and Modeling
Accurate knowledge of phase behavior in polyolefin–solvent mixtures is critical for ensuring stable operation and safe scale-up of industrial solution polymerization processes. The binary (n-hexane + ethylene/1-octene copolymer, POE96k-10) and ternary (α-olefin + n-hexane + POE96k-10) phase behaviors were investigated via a visual high-pressure cell (POE96k-10: Mw = 96 kg·mol–1, Mw/Mn = 3.87, 1-octene mole fraction = 10.31 mol%) at temperatures of 380~480 K and pressures as high as 14 MPa. To systematically analyze the effects of α-olefin mass fraction and type on phase transition, four industrially relevant α-olefins (ethylene, 1-butene, 1-hexene, and 1-octene) were investigated. The results show that the phase transition temperature and pressure for liquid–liquid and liquid–vapor transitions show an approximately linear dependence on α-olefin mass fraction. Ethylene, 1-butene, and 1-hexene lower the phase transition temperature, whereas 1-octene increases it. Ethylene exhibits a strong anti-solvent effect, significantly lowering the transition temperature while increasing the phase transition pressure. The modified Sanchez-Lacombe equation of state (MSL EOS) effectively correlates and reproduces the phase equilibrium data of the α-olefin + n-hexane + POE96k-10 ternary systems, though its accuracy decreases with increasing α-olefin chain length.
Open AccessHigh-Pressure Phase Behavior of α-Olefin + n-Hexane + Ethylene/1-Octene Copolymer Systems: Experimental Study and Modeling
Accurate knowledge of phase behavior in polyolefin–solvent mixtures is critical for ensuring stable operation and safe scale-up of industrial solution polymerization processes. The binary (n-hexane + ethylene/1-octene copolymer, POE96k-10) and ternary (α-olefin + n-hexane + POE96k-10) phase behaviors were investigated via a visual high-pressure cell (POE96k-10: Mw = 96 kg·mol–1, Mw/Mn = 3.87, 1-octene mole fraction = 10.31 mol%) at temperatures of 380~480 K and pressures as high as 14 MPa. To systematically analyze the effects of α-olefin mass fraction and type on phase transition, four industrially relevant α-olefins (ethylene, 1-butene, 1-hexene, and 1-octene) were investigated. The results show that the phase transition temperature and pressure for liquid–liquid and liquid–vapor transitions show an approximately linear dependence on α-olefin mass fraction. Ethylene, 1-butene, and 1-hexene lower the phase transition temperature, whereas 1-octene increases it. Ethylene exhibits a strong anti-solvent effect, significantly lowering the transition temperature while increasing the phase transition pressure. The modified Sanchez-Lacombe equation of state (MSL EOS) effectively correlates and reproduces the phase equilibrium data of the α-olefin + n-hexane + POE96k-10 ternary systems, though its accuracy decreases with increasing α-olefin chain length.
- Open Access
Impact of Hexyl Branch Content on the Mechanical Properties and Deformation Mechanisms of Amorphous Ethylene/1-Octene Copolymers: A Molecular Dynamics Study
Ethylene/1-octene copolymers exhibit enhanced flexibility and impact resistance compared to polyethylene, which makes them well suited for applications in advanced plastics and elastomers. United-atom molecular dynamics (MD) simulations were conducted to explore the mechanical behavior and deformation mechanisms of ethylene/1-octene copolymers under uniaxial tensile loading. This study systematically examined the influence of temperature, polymer chain length, chain quantity, and strain rate, with a specific focus on how hexyl branch content impacts the mechanical properties of amorphous ethylene/1-octene copolymers. The simulation results indicate that as the branch content increases, the yield strength and elastic modulus decrease, suggesting a trade-off between flexibility and mechanical strength. Energy decomposition analysis reveals that copolymers with more branched chains undergo greater changes in van der Waals energy. Additionally, as the branch content increases, the reduction in dihedral angle energy in the strain hardening region becomes more gradual, and the rate and the extent of the transition of dihedral angles from gauche to trans conformation decrease under deformation. Ethylene/1-octene copolymers exhibit higher chain entanglement parameters compared to linear polyethylene, with these parameters increasing as the branch content rises. Moreover, increasing the branch content results in a less pronounced increase in chain orientation along the loading direction.
Open AccessImpact of Hexyl Branch Content on the Mechanical Properties and Deformation Mechanisms of Amorphous Ethylene/1-Octene Copolymers: A Molecular Dynamics Study
Ethylene/1-octene copolymers exhibit enhanced flexibility and impact resistance compared to polyethylene, which makes them well suited for applications in advanced plastics and elastomers. United-atom molecular dynamics (MD) simulations were conducted to explore the mechanical behavior and deformation mechanisms of ethylene/1-octene copolymers under uniaxial tensile loading. This study systematically examined the influence of temperature, polymer chain length, chain quantity, and strain rate, with a specific focus on how hexyl branch content impacts the mechanical properties of amorphous ethylene/1-octene copolymers. The simulation results indicate that as the branch content increases, the yield strength and elastic modulus decrease, suggesting a trade-off between flexibility and mechanical strength. Energy decomposition analysis reveals that copolymers with more branched chains undergo greater changes in van der Waals energy. Additionally, as the branch content increases, the reduction in dihedral angle energy in the strain hardening region becomes more gradual, and the rate and the extent of the transition of dihedral angles from gauche to trans conformation decrease under deformation. Ethylene/1-octene copolymers exhibit higher chain entanglement parameters compared to linear polyethylene, with these parameters increasing as the branch content rises. Moreover, increasing the branch content results in a less pronounced increase in chain orientation along the loading direction.
- Open Access
The Effect of Feeding Sequence on the Structure and Properties of the Ethylene/1-Octene Copolymer in the Semi-Continuous Polymerization Reaction System
The performance of ethylene/1-octene copolymer primarily depends on the microstructure of the polymer chain. This study employed a new method to control the inter-distribution of hexyl chain branches directly on the backbone of the ethylene/1-octene copolymer. Three ethylene/1-octene copolymers with different inter-distributions of hexyl chain branches were synthesized using [Me2Si(C5Me4) (NtBu)] TiCl2 (Ti–CGC) by different feeding sequences in the semi-continuous polymerization reaction system. The three copolymers were named according to the feeding sequence of the materials: ethylene/1-octene/Ti–CGC (EOC), 1-octene/Ti–CGC/ethylene (OCE), and ethylene/Ti–CGC/1-octene (ECO), respectively. The structure and properties of the copolymers were characterized using HT-GPC, 13C-NMR, DSC, WAXD, DMA, MI, and Uniaxial Tension Test. The results showed that the feeding sequence greatly affected the comonomer distribution of the molecular chains, molecular weight, molecular weight distribution, and chemical composition of the copolymers, consequently influencing their thermal performance and mechanical properties. Thus, it is probable that one could obtain an ethylene/1-octene copolymer with designed properties by controlling the feeding sequence during the ethylene/1-octene semi-continuous copolymerization process.
Open AccessThe Effect of Feeding Sequence on the Structure and Properties of the Ethylene/1-Octene Copolymer in the Semi-Continuous Polymerization Reaction System
The performance of ethylene/1-octene copolymer primarily depends on the microstructure of the polymer chain. This study employed a new method to control the inter-distribution of hexyl chain branches directly on the backbone of the ethylene/1-octene copolymer. Three ethylene/1-octene copolymers with different inter-distributions of hexyl chain branches were synthesized using [Me2Si(C5Me4) (NtBu)] TiCl2 (Ti–CGC) by different feeding sequences in the semi-continuous polymerization reaction system. The three copolymers were named according to the feeding sequence of the materials: ethylene/1-octene/Ti–CGC (EOC), 1-octene/Ti–CGC/ethylene (OCE), and ethylene/Ti–CGC/1-octene (ECO), respectively. The structure and properties of the copolymers were characterized using HT-GPC, 13C-NMR, DSC, WAXD, DMA, MI, and Uniaxial Tension Test. The results showed that the feeding sequence greatly affected the comonomer distribution of the molecular chains, molecular weight, molecular weight distribution, and chemical composition of the copolymers, consequently influencing their thermal performance and mechanical properties. Thus, it is probable that one could obtain an ethylene/1-octene copolymer with designed properties by controlling the feeding sequence during the ethylene/1-octene semi-continuous copolymerization process.