Joshua R. Marsh
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Joshua R. Marsh has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Anna Pontén
Equinor ASA Trondheim Norway
2 shared publications - Daniel Ronald
Department of Earth and Environmental Sciences University of Manchester Manchester UK
2 shared publications - Ian A. Kane
Department of Earth and Environmental Sciences University of Manchester Manchester UK
2 shared publications - Michał Jakub Warchoł
Equinor ASA Bergen Norway
2 shared publications - Miquel Poyatos-Moré
Departament de Geologia Universitat Autònoma de Barcelona Cerdanyola del Vallés Spain
2 shared publications Daniel T. Esterline
Department of Chemistry , Miami University , Oxford , OH , 45056 , USA
1 shared publication
Latest Publications
- Open Access
- 17 November 2026
- Published by Wiley in Basin Research
- Vol. 38 (6)
Multi‐Scale Analysis of the Early Eocene Frigg Deep‐Water Fan System, Northern North Sea: Implications for Carbon Capture and Storage
Palaeocene–Eocene deep‐water fans of the northern North Sea form major hydrocarbon reservoirs and saline aquifers with significant potential for geological CO 2 storage. However, their suitability for geological CO 2 storage depends on reservoir heterogeneity and connectivity across multiple scales. Here, we integrate 11 3D seismic reflection volumes, data from 70 wells and 720 m of core to characterise the Ypresian Frigg Formation from bed to depositional‐system scale and evaluate its suitability for CO 2 storage. Seismic mapping reveals a shelf‐edge canyon that acted as a long‐lived point source, routing sediment across a fault‐controlled stepped slope into a deep‐water fan represented by the Frigg Formation. The formation comprises 11 bed types grouped into seven architectural elements and four stratigraphic units. The latter reflecting fan initiation, sand‐rich expansion, maximum basinward progradation and abandonment. In the studied dataset, channel deposits comprise 86% of the formation and are characterised by high sandstone content, porosity and permeability, indicating strong reservoir connectivity and potential for high injection rates. Lobe deposits comprise 13% of the formation in the studied dataset and contain more frequent interbedded siltstones and claystones. Formation‐pressure data shows that locally developed background and abandonment elements, and potentially channel base deposits, comprising 2% of the studied dataset can compartmentalise the reservoir and inhibit vertical fluid movement. In contrast, siltstone interbeds within lobe deposits do not form demonstrable pressure barriers. These heterogeneities are likely to promote lateral CO 2 migration and improve pore‐space utilisation, although their limited and variable extent requires careful characterisation. The Frigg Formation therefore offers substantial CO 2 storage potential, but injection design must account for predictable spatial variations in depositional architecture, connectivity and pressure communication. These insights are applicable to CCS projects in other regions, guiding CO 2 specific reservoir characterisation and injection strategies.
- 17 November 2026
- Published by Wiley in Basin Research
- Vol. 38 (6)
Open AccessMulti‐Scale Analysis of the Early Eocene Frigg Deep‐Water Fan System, Northern North Sea: Implications for Carbon Capture and Storage
Palaeocene–Eocene deep‐water fans of the northern North Sea form major hydrocarbon reservoirs and saline aquifers with significant potential for geological CO 2 storage. However, their suitability for geological CO 2 storage depends on reservoir heterogeneity and connectivity across multiple scales. Here, we integrate 11 3D seismic reflection volumes, data from 70 wells and 720 m of core to characterise the Ypresian Frigg Formation from bed to depositional‐system scale and evaluate its suitability for CO 2 storage. Seismic mapping reveals a shelf‐edge canyon that acted as a long‐lived point source, routing sediment across a fault‐controlled stepped slope into a deep‐water fan represented by the Frigg Formation. The formation comprises 11 bed types grouped into seven architectural elements and four stratigraphic units. The latter reflecting fan initiation, sand‐rich expansion, maximum basinward progradation and abandonment. In the studied dataset, channel deposits comprise 86% of the formation and are characterised by high sandstone content, porosity and permeability, indicating strong reservoir connectivity and potential for high injection rates. Lobe deposits comprise 13% of the formation in the studied dataset and contain more frequent interbedded siltstones and claystones. Formation‐pressure data shows that locally developed background and abandonment elements, and potentially channel base deposits, comprising 2% of the studied dataset can compartmentalise the reservoir and inhibit vertical fluid movement. In contrast, siltstone interbeds within lobe deposits do not form demonstrable pressure barriers. These heterogeneities are likely to promote lateral CO 2 migration and improve pore‐space utilisation, although their limited and variable extent requires careful characterisation. The Frigg Formation therefore offers substantial CO 2 storage potential, but injection design must account for predictable spatial variations in depositional architecture, connectivity and pressure communication. These insights are applicable to CCS projects in other regions, guiding CO 2 specific reservoir characterisation and injection strategies.
- Open Access
- 15 October 2026
- Published by Geological Society of London in Journal of the Geological Society
Quantifying the heterogeneity of deep-water depositional environments for CO 2 storage: an outcrop-based example from the Hecho Group (Spanish Pyrenees)
Characterising heterogeneity at a range of scales for CO 2 storage is critical to balance reservoir quality (net storage and injection feasibility) against internal trapping efficiency. Here, the deep-water Banastón System (Middle Eocene Hecho Group) of the South Pyrenean Foreland Basin is utilised as a subsurface reservoir analogue for application to subsurface settings. An 80 km down-dip transect was analysed to quantify lithological, mineralogical and reservoir heterogeneity from bed to depositional element scale, including sedimentological description, permeability estimates and petrographic analysis. Reservoir geometries include amalgamated and scoured channel-fill and channel-lobe transition deposits, proximal lobes that show compensational stacking and which, down depositional-dip, transition into increasingly tabular and compartmentalised medial lobes and distal lobe fringes. Quartz and extrabasinal lithics dominate proximal turbidites, feldspar and mica are abundant in medial-lobe deposits, whilst distal fringe turbidites and hybrid beds are clay matrix-rich, fine-grained carbonate-rich, micaceous and overlain by carbonate-rich mud, thereby altering the reactive mineral composition from proximal to distal deposits. Proximal to medial lobes feature good reservoir characteristics for net storage of CO 2 , tabular geometries with inherent vertical permeability heterogeneity that would be conducive to lateral plume spread, and mineralogical heterogeneity that could promote CO 2 -reservoir-brine reactions, indicating their potential as ideal storage sites.
- 15 October 2026
- Published by Geological Society of London in Journal of the Geological Society
Open AccessQuantifying the heterogeneity of deep-water depositional environments for CO 2 storage: an outcrop-based example from the Hecho Group (Spanish Pyrenees)
Characterising heterogeneity at a range of scales for CO 2 storage is critical to balance reservoir quality (net storage and injection feasibility) against internal trapping efficiency. Here, the deep-water Banastón System (Middle Eocene Hecho Group) of the South Pyrenean Foreland Basin is utilised as a subsurface reservoir analogue for application to subsurface settings. An 80 km down-dip transect was analysed to quantify lithological, mineralogical and reservoir heterogeneity from bed to depositional element scale, including sedimentological description, permeability estimates and petrographic analysis. Reservoir geometries include amalgamated and scoured channel-fill and channel-lobe transition deposits, proximal lobes that show compensational stacking and which, down depositional-dip, transition into increasingly tabular and compartmentalised medial lobes and distal lobe fringes. Quartz and extrabasinal lithics dominate proximal turbidites, feldspar and mica are abundant in medial-lobe deposits, whilst distal fringe turbidites and hybrid beds are clay matrix-rich, fine-grained carbonate-rich, micaceous and overlain by carbonate-rich mud, thereby altering the reactive mineral composition from proximal to distal deposits. Proximal to medial lobes feature good reservoir characteristics for net storage of CO 2 , tabular geometries with inherent vertical permeability heterogeneity that would be conducive to lateral plume spread, and mineralogical heterogeneity that could promote CO 2 -reservoir-brine reactions, indicating their potential as ideal storage sites.
- Open Access
- 25 April 2022
- Published by Geological Society of London in Petroleum Geoscience
- Vol. 28 (3)
Petrographic and diagenetic investigation of the distal Triassic ‘Budleighensis’ fluvial system in the Solway and Carlisle Basins for potential CO 2 storage
Failure to find hydrocarbon prospects in the Solway Basin region has resulted in a lack of research into the local Sherwood Sandstone Group petrography, reservoir quality and depositional history compared to the analogous southern reservoirs in the EISB which will be utilized for carbon storage. A detailed petrographic study is presented which aims to understand if the Solway Firth could have similar utility. The Permo–Triassic Sherwood Sandstone Group is believed to be deposited in depocentres connected during the Early Triassic by the extensive ‘Budleighensis’ fluvial system. Here, the Solway and Carlisle basins are proposed as terminal sites for this endorheic system, with the Lower Triassic Annan Sandstone Formation ascribed to the distal region of a fluvial distributary zone and the overlying Kirklinton Sandstone Formation thought to mark a transition to a basinal zone, depositing aeolian sandstones and locally associated playa lake facies. Fluid inclusion, stable isotope burial history modelling and field observations have been used to assess the relative timing and importance of different diagenetic cements. Early diagenetic cements include grain-rimming haematite and patchy calcite cement, especially in the Annan Sandstone Formation. Later burial diagenesis sees further calcite cement, quartz overgrowths and, restricted to the Kirklinton Sandstone Formation, ferroan dolomite. Porosity and permeability show significant differences between fluvial Annan and aeolian Kirklinton facies associations. Despite the finer grain size, a reservoir with excellent porosity and permeability as well as no hydrocarbon charging or legacy hydrocarbon extraction is persevered, suggesting the Solway Basin could be a secure CO 2 storage site. This article is part of the Energy Geoscience Series available at https://www.lyellcollection.org/cc/energy-geoscience-series Supplementary material: An overview of the primary and secondary data collected and utilised in this study, as well as raw data values are available at https://doi.org/10.6084/m9.figshare.c.5906677
- 25 April 2022
- Published by Geological Society of London in Petroleum Geoscience
- Vol. 28 (3)
Open AccessPetrographic and diagenetic investigation of the distal Triassic ‘Budleighensis’ fluvial system in the Solway and Carlisle Basins for potential CO 2 storage
Failure to find hydrocarbon prospects in the Solway Basin region has resulted in a lack of research into the local Sherwood Sandstone Group petrography, reservoir quality and depositional history compared to the analogous southern reservoirs in the EISB which will be utilized for carbon storage. A detailed petrographic study is presented which aims to understand if the Solway Firth could have similar utility. The Permo–Triassic Sherwood Sandstone Group is believed to be deposited in depocentres connected during the Early Triassic by the extensive ‘Budleighensis’ fluvial system. Here, the Solway and Carlisle basins are proposed as terminal sites for this endorheic system, with the Lower Triassic Annan Sandstone Formation ascribed to the distal region of a fluvial distributary zone and the overlying Kirklinton Sandstone Formation thought to mark a transition to a basinal zone, depositing aeolian sandstones and locally associated playa lake facies. Fluid inclusion, stable isotope burial history modelling and field observations have been used to assess the relative timing and importance of different diagenetic cements. Early diagenetic cements include grain-rimming haematite and patchy calcite cement, especially in the Annan Sandstone Formation. Later burial diagenesis sees further calcite cement, quartz overgrowths and, restricted to the Kirklinton Sandstone Formation, ferroan dolomite. Porosity and permeability show significant differences between fluvial Annan and aeolian Kirklinton facies associations. Despite the finer grain size, a reservoir with excellent porosity and permeability as well as no hydrocarbon charging or legacy hydrocarbon extraction is persevered, suggesting the Solway Basin could be a secure CO 2 storage site. This article is part of the Energy Geoscience Series available at https://www.lyellcollection.org/cc/energy-geoscience-series Supplementary material: An overview of the primary and secondary data collected and utilised in this study, as well as raw data values are available at https://doi.org/10.6084/m9.figshare.c.5906677
- 1 November 1993
- Published by Taylor & Francis in Environmental Technology
- Vol. 14 (11) , 1097-1100
Removal of transition metals from motor oil using ion exchange resins
A variety of polystyrene‐divinylbenzene resins functionalized with such groups as SO3H, N(CH2COOH)2, and SH were tested in the slurry batch mode for the removal of transition metals from used motor oil. Naturally occurring materials such as coal and clay were also tested. The N(CH2COOH)2 resin (Chelex 100) and the SH resin (Duolite GT‐73) were found effective removing on the average 70 and 78% of metals such as Fe, Pb, Zn, Cu, Ni, and Mn, respectively. About 700 mLs of hot oil when pumped through a 37 × 0.9 cm column packed with the Duolite resin could be demetalized to the extent of about 80% if the column was first washed with hexane.
- 1 November 1993
- Published by Taylor & Francis in Environmental Technology
- Vol. 14 (11) , 1097-1100
Removal of transition metals from motor oil using ion exchange resins
A variety of polystyrene‐divinylbenzene resins functionalized with such groups as SO3H, N(CH2COOH)2, and SH were tested in the slurry batch mode for the removal of transition metals from used motor oil. Naturally occurring materials such as coal and clay were also tested. The N(CH2COOH)2 resin (Chelex 100) and the SH resin (Duolite GT‐73) were found effective removing on the average 70 and 78% of metals such as Fe, Pb, Zn, Cu, Ni, and Mn, respectively. About 700 mLs of hot oil when pumped through a 37 × 0.9 cm column packed with the Duolite resin could be demetalized to the extent of about 80% if the column was first washed with hexane.