Anna Pontén
Research Subjects
Anna Pontén has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Michał Jakub Warchoł
Equinor ASA Bergen Norway
3 shared publications - Daniel Ronald
Department of Earth and Environmental Sciences University of Manchester Manchester UK
2 shared publications - Ian A. Kane
Department of Earth and Environmental Sciences University of Manchester Manchester UK
2 shared publications - Joshua R. Marsh
Department of Earth and Environmental Sciences University of Manchester Manchester UK
2 shared publications - Miquel Poyatos-Moré
Departament de Geologia Universitat Autònoma de Barcelona Cerdanyola del Vallés Spain
2 shared publications Adeel Zahid
1 shared publication
Latest Publications
- Open Access
- 17 November 2026
- Published by Wiley in Basin Research
- Vol. 38 (6)
Multi‐Scale Analysis of the Early Eocene Frigg Deep‐Water Fan System, Northern North Sea: Implications for Carbon Capture and Storage
Palaeocene–Eocene deep‐water fans of the northern North Sea form major hydrocarbon reservoirs and saline aquifers with significant potential for geological CO 2 storage. However, their suitability for geological CO 2 storage depends on reservoir heterogeneity and connectivity across multiple scales. Here, we integrate 11 3D seismic reflection volumes, data from 70 wells and 720 m of core to characterise the Ypresian Frigg Formation from bed to depositional‐system scale and evaluate its suitability for CO 2 storage. Seismic mapping reveals a shelf‐edge canyon that acted as a long‐lived point source, routing sediment across a fault‐controlled stepped slope into a deep‐water fan represented by the Frigg Formation. The formation comprises 11 bed types grouped into seven architectural elements and four stratigraphic units. The latter reflecting fan initiation, sand‐rich expansion, maximum basinward progradation and abandonment. In the studied dataset, channel deposits comprise 86% of the formation and are characterised by high sandstone content, porosity and permeability, indicating strong reservoir connectivity and potential for high injection rates. Lobe deposits comprise 13% of the formation in the studied dataset and contain more frequent interbedded siltstones and claystones. Formation‐pressure data shows that locally developed background and abandonment elements, and potentially channel base deposits, comprising 2% of the studied dataset can compartmentalise the reservoir and inhibit vertical fluid movement. In contrast, siltstone interbeds within lobe deposits do not form demonstrable pressure barriers. These heterogeneities are likely to promote lateral CO 2 migration and improve pore‐space utilisation, although their limited and variable extent requires careful characterisation. The Frigg Formation therefore offers substantial CO 2 storage potential, but injection design must account for predictable spatial variations in depositional architecture, connectivity and pressure communication. These insights are applicable to CCS projects in other regions, guiding CO 2 specific reservoir characterisation and injection strategies.
- 17 November 2026
- Published by Wiley in Basin Research
- Vol. 38 (6)
Open AccessMulti‐Scale Analysis of the Early Eocene Frigg Deep‐Water Fan System, Northern North Sea: Implications for Carbon Capture and Storage
Palaeocene–Eocene deep‐water fans of the northern North Sea form major hydrocarbon reservoirs and saline aquifers with significant potential for geological CO 2 storage. However, their suitability for geological CO 2 storage depends on reservoir heterogeneity and connectivity across multiple scales. Here, we integrate 11 3D seismic reflection volumes, data from 70 wells and 720 m of core to characterise the Ypresian Frigg Formation from bed to depositional‐system scale and evaluate its suitability for CO 2 storage. Seismic mapping reveals a shelf‐edge canyon that acted as a long‐lived point source, routing sediment across a fault‐controlled stepped slope into a deep‐water fan represented by the Frigg Formation. The formation comprises 11 bed types grouped into seven architectural elements and four stratigraphic units. The latter reflecting fan initiation, sand‐rich expansion, maximum basinward progradation and abandonment. In the studied dataset, channel deposits comprise 86% of the formation and are characterised by high sandstone content, porosity and permeability, indicating strong reservoir connectivity and potential for high injection rates. Lobe deposits comprise 13% of the formation in the studied dataset and contain more frequent interbedded siltstones and claystones. Formation‐pressure data shows that locally developed background and abandonment elements, and potentially channel base deposits, comprising 2% of the studied dataset can compartmentalise the reservoir and inhibit vertical fluid movement. In contrast, siltstone interbeds within lobe deposits do not form demonstrable pressure barriers. These heterogeneities are likely to promote lateral CO 2 migration and improve pore‐space utilisation, although their limited and variable extent requires careful characterisation. The Frigg Formation therefore offers substantial CO 2 storage potential, but injection design must account for predictable spatial variations in depositional architecture, connectivity and pressure communication. These insights are applicable to CCS projects in other regions, guiding CO 2 specific reservoir characterisation and injection strategies.
- Open Access
- 15 October 2026
- Published by Geological Society of London in Journal of the Geological Society
Quantifying the heterogeneity of deep-water depositional environments for CO 2 storage: an outcrop-based example from the Hecho Group (Spanish Pyrenees)
Characterising heterogeneity at a range of scales for CO 2 storage is critical to balance reservoir quality (net storage and injection feasibility) against internal trapping efficiency. Here, the deep-water Banastón System (Middle Eocene Hecho Group) of the South Pyrenean Foreland Basin is utilised as a subsurface reservoir analogue for application to subsurface settings. An 80 km down-dip transect was analysed to quantify lithological, mineralogical and reservoir heterogeneity from bed to depositional element scale, including sedimentological description, permeability estimates and petrographic analysis. Reservoir geometries include amalgamated and scoured channel-fill and channel-lobe transition deposits, proximal lobes that show compensational stacking and which, down depositional-dip, transition into increasingly tabular and compartmentalised medial lobes and distal lobe fringes. Quartz and extrabasinal lithics dominate proximal turbidites, feldspar and mica are abundant in medial-lobe deposits, whilst distal fringe turbidites and hybrid beds are clay matrix-rich, fine-grained carbonate-rich, micaceous and overlain by carbonate-rich mud, thereby altering the reactive mineral composition from proximal to distal deposits. Proximal to medial lobes feature good reservoir characteristics for net storage of CO 2 , tabular geometries with inherent vertical permeability heterogeneity that would be conducive to lateral plume spread, and mineralogical heterogeneity that could promote CO 2 -reservoir-brine reactions, indicating their potential as ideal storage sites.
- 15 October 2026
- Published by Geological Society of London in Journal of the Geological Society
Open AccessQuantifying the heterogeneity of deep-water depositional environments for CO 2 storage: an outcrop-based example from the Hecho Group (Spanish Pyrenees)
Characterising heterogeneity at a range of scales for CO 2 storage is critical to balance reservoir quality (net storage and injection feasibility) against internal trapping efficiency. Here, the deep-water Banastón System (Middle Eocene Hecho Group) of the South Pyrenean Foreland Basin is utilised as a subsurface reservoir analogue for application to subsurface settings. An 80 km down-dip transect was analysed to quantify lithological, mineralogical and reservoir heterogeneity from bed to depositional element scale, including sedimentological description, permeability estimates and petrographic analysis. Reservoir geometries include amalgamated and scoured channel-fill and channel-lobe transition deposits, proximal lobes that show compensational stacking and which, down depositional-dip, transition into increasingly tabular and compartmentalised medial lobes and distal lobe fringes. Quartz and extrabasinal lithics dominate proximal turbidites, feldspar and mica are abundant in medial-lobe deposits, whilst distal fringe turbidites and hybrid beds are clay matrix-rich, fine-grained carbonate-rich, micaceous and overlain by carbonate-rich mud, thereby altering the reactive mineral composition from proximal to distal deposits. Proximal to medial lobes feature good reservoir characteristics for net storage of CO 2 , tabular geometries with inherent vertical permeability heterogeneity that would be conducive to lateral plume spread, and mineralogical heterogeneity that could promote CO 2 -reservoir-brine reactions, indicating their potential as ideal storage sites.
- Open Access
- 1 January 2025
- Published by Elsevier in SSRN Electronic Journal
Prediction of Regional Pressure Interactions in CO2 Storage Clusters, Using Material Balance Modelling
The requirement to reduce global CO2 emissions has resulted in the need for rapid, safe development of Carbon Capture and Storage (CCS) projects. Regional storage clusters, that often lie adjacent to past or present hydrocarbon hubs and associated infrastructure, are seen as a potential fast-track routes toward decarbonisation. These complex subsurface settings pose a critical challenge in predicting pressure interference not only between planned storage sites but also with existing oil and gas fields. Injection of CO2 can result in pressure interference due to displacement and compression of in-situ formation fluids.Understanding the potential for pressure interference between injection sites and any existing pressure offtake locations (e.g. hydrocarbon production) is critical to successful deployment of CCS at scale. Here we show that robust, rapid assessment of basin wide pressure effects of CO2 injection can be made for early-phase evaluations using a simple Material Balance tool (MBAL) based on classical engineering methods without resorting to full physics simulators.Basin scale conventional 3D models of the Endurance (UK) and Smeaheia (Norway) areas have been constructed internally using Roxar RMS software and subsequently simulated with Pflotran-OGS, an open-source simulator focused on CO2 injection in porous media. In parallel with Pflotran-OGS simulations, a simple material balance tool, MBAL, has been used to estimate semi-regional pressure interference.Reservoir parameters were reproduced in both models (average porosity, water-in-place volume, initial pressure, PVT, relative permeability, rock compressibility, injection scheme, scheduling and monitoring period) to facilitate benchmarking the MBAL results against Pflotran-OGS. Within MBAL a series of “tanks” based on structural and conceptual geological understanding were established to monitor average pressures and fluxes. A comparison of the results from each method of simulation shows that average pressures for different structures can be replicated between Pflotran-OGS and MBAL. Due to the large size of the model grid (7-14 million cells) and using an injection period of ~25 yrs and a subsequent monitoring period of ~50 yrs, a Pflotran-OGS run required many hours to complete on a cloud-hosted parallelized server solution. In contrast, MBAL completes a single run within a few minutes.This study suggests that a simple material balance model is a fit for purpose tool for early evaluation of pressure interference prior to building a numerical simulator model or in conjunction with numerical simulators as a proxy model for fast calculations and results comparison.
- 1 January 2025
- Published by Elsevier in SSRN Electronic Journal
Open AccessPrediction of Regional Pressure Interactions in CO2 Storage Clusters, Using Material Balance Modelling
The requirement to reduce global CO2 emissions has resulted in the need for rapid, safe development of Carbon Capture and Storage (CCS) projects. Regional storage clusters, that often lie adjacent to past or present hydrocarbon hubs and associated infrastructure, are seen as a potential fast-track routes toward decarbonisation. These complex subsurface settings pose a critical challenge in predicting pressure interference not only between planned storage sites but also with existing oil and gas fields. Injection of CO2 can result in pressure interference due to displacement and compression of in-situ formation fluids.Understanding the potential for pressure interference between injection sites and any existing pressure offtake locations (e.g. hydrocarbon production) is critical to successful deployment of CCS at scale. Here we show that robust, rapid assessment of basin wide pressure effects of CO2 injection can be made for early-phase evaluations using a simple Material Balance tool (MBAL) based on classical engineering methods without resorting to full physics simulators.Basin scale conventional 3D models of the Endurance (UK) and Smeaheia (Norway) areas have been constructed internally using Roxar RMS software and subsequently simulated with Pflotran-OGS, an open-source simulator focused on CO2 injection in porous media. In parallel with Pflotran-OGS simulations, a simple material balance tool, MBAL, has been used to estimate semi-regional pressure interference.Reservoir parameters were reproduced in both models (average porosity, water-in-place volume, initial pressure, PVT, relative permeability, rock compressibility, injection scheme, scheduling and monitoring period) to facilitate benchmarking the MBAL results against Pflotran-OGS. Within MBAL a series of “tanks” based on structural and conceptual geological understanding were established to monitor average pressures and fluxes. A comparison of the results from each method of simulation shows that average pressures for different structures can be replicated between Pflotran-OGS and MBAL. Due to the large size of the model grid (7-14 million cells) and using an injection period of ~25 yrs and a subsequent monitoring period of ~50 yrs, a Pflotran-OGS run required many hours to complete on a cloud-hosted parallelized server solution. In contrast, MBAL completes a single run within a few minutes.This study suggests that a simple material balance model is a fit for purpose tool for early evaluation of pressure interference prior to building a numerical simulator model or in conjunction with numerical simulators as a proxy model for fast calculations and results comparison.
- Open Access
- 8 January 2024
- Published by Geological Society of London in Geoenergy
- Vol. 2 (1)
Sleipner 26 years: how well-established subsurface monitoring work processes have contributed to successful offshore CO 2 injection
In August 2022, the world's longest running offshore industrial CO 2 injection project celebrated its 26-year anniversary. During these years, the Sleipner CO 2 injection project has been invaluable in demonstrating that offshore CO 2 storage is feasible, safe, and efficient. We will here show how time-lapse seismic monitoring of the CO 2 plume development has revealed depositional architecture in the Utsira Formation, and how thin mudstone layers have contributed to distributing the CO 2 in a larger rock volume, promoting trapping by dissolution. The relatively shallow depth (800–1000 m) of Utsira Formation in the Sleipner area also makes the Sleipner CO 2 injection site a good proxy for understanding the effects of overburden stratigraphy for deeper injection sites, giving important knowledge of detectability of thin, shallow CO 2 accumulations. Finally, we will show how the experience from Sleipner CO 2 injection has built confidence when planning monitoring programmes for future CO 2 injection sites.
- 8 January 2024
- Published by Geological Society of London in Geoenergy
- Vol. 2 (1)
Open AccessSleipner 26 years: how well-established subsurface monitoring work processes have contributed to successful offshore CO 2 injection
In August 2022, the world's longest running offshore industrial CO 2 injection project celebrated its 26-year anniversary. During these years, the Sleipner CO 2 injection project has been invaluable in demonstrating that offshore CO 2 storage is feasible, safe, and efficient. We will here show how time-lapse seismic monitoring of the CO 2 plume development has revealed depositional architecture in the Utsira Formation, and how thin mudstone layers have contributed to distributing the CO 2 in a larger rock volume, promoting trapping by dissolution. The relatively shallow depth (800–1000 m) of Utsira Formation in the Sleipner area also makes the Sleipner CO 2 injection site a good proxy for understanding the effects of overburden stratigraphy for deeper injection sites, giving important knowledge of detectability of thin, shallow CO 2 accumulations. Finally, we will show how the experience from Sleipner CO 2 injection has built confidence when planning monitoring programmes for future CO 2 injection sites.