JSJaewoo Shin

Jaewoo Shin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jaewoo Shin has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Low-Temperature Processed Complementary Inverter With Tin-Based Transparent Oxide Semiconductors

    by Chankyu Lee, Jin-Hwan Hong, Jaewoo Shin, Saemi Lee, Minsoo Kim, Sungsoo Park, Junehyeong Cho, Thanh Tien Nguyen, Byoungdeog Choi

    Transparent oxide semiconductors are promising materials due to their various benefits, such as high mobility and cost-efficient production. However, oxide semiconductors fabricated using the sputtering method require an additional postannealing process at a high temperature, which hinders their fabrication on plastic substrates and application to flexible devices. In addition, one of the critical drawbacks of oxide semiconductors is the shortage of p-type materials. Tin monoxide (SnO), a p-type oxide semiconductor, has the advantages of high mobility and low-temperature production. To address the aforementioned limitations, this study investigates the simultaneous low-temperature process on tin-based oxide semiconductors; p-type SnOx and n-type amorphous indium gallium tin oxide (In:Ga:Sn = 7:1:2). By integrating two optimized thin-film transistors (TFTs) under postann-ealing temperature of 180 °C, we fabricated a tin-based oxide semiconductor complementary inverter, with a high voltage gain (98.0); a noise margin high ( ${\text {NM}_{H}}$ ) and noise margin low ( ${\text {NM}_{L}}$ ) of 13.9 (46.3% of ${V} _{\text {DD}}$ ) and 13.3 V (44.3% of ${V} _{\text {DD}}$ ) at a ${V} _{\text {DD}}$ of 30 V, respectively, were also recorded. For further investigation, we fabricated a comple- mentary inverter on a plastic substrate. The fabricated device exhibited remarkable bias stress stability with excellent electrical characteristics: ${\text {NM}_{H}}$ of 3.9 V (39.0% of ${V} _{\text {DD}}$ ), ${\text {NM}_{L}}$ of 4.5 V (45.0% of ${V} _{\text {DD}}$ ), and a high voltage gain of 114.5 at a ${V} _{\text {DD}}$ of 10 V, thus demonstrating admirable application to flexible devices.


  • Electrical Reliability of Flexible Low-Temperature Polycrystalline Oxide Thin-Film Transistors Under Mechanical Stress

    by Chanhee Han, Hyojung Kim, Dongbhin Kim, Jaewoo Shin, Yubin Park, Changwoo Byun, Byoungdeog Choi

    Electronic devices based on flexible displays have been developed for use in various applications. Upon bending such devices, the applied mechanical force deteriorates the reliability of the devices. Therefore, a high bending reliability that is influenced by tensile and compressive forces that vary depending on the bending radius of curvature must be secured to ensure a reliable device operation. In this study, we investigated the electrical characteristics of flexible low-temperature polycrystalline silicon (LTPS) and amorphous indium–gallium–zinc–oxide (a-IGZO) thin-film transistors (TFTs) on polyimide (PI) substrate and subsequently conducted reliability evaluation of the devices under mechanical stress by applying negative bias temperature illumination stress (NBTIS). The degradations in the electrical properties, such as threshold voltage ( ${V}_{\text {th}}$ ) shift, OFF-state current ( ${I}_{\text {off}}$ ), and subthreshold slope (SS), and reliability, increased, and the reliability worsened, as the tensile force increased under decreasing radius of curvature, whereas relatively low degradation occurred under compressive force. A tensile stress-induced increase in grain boundary state density in polycrystalline silicon (poly-Si) and oxygen vacancy in a-IGZO were verified by density of state (DOS) extraction; the cracks occurring due to tensile stress were optically analyzed; the external moisture penetration along the cracks further degrades the device characteristics. This study provides an analysis of device design for ensuring reliability under the application of mechanical stress, thereby contributing to the development of reliable flexible technology.