CLChankyu Lee

Chankyu Lee

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chankyu Lee has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Low-Temperature Processed Complementary Inverter With Tin-Based Transparent Oxide Semiconductors

    by Chankyu Lee, Jin-Hwan Hong, Jaewoo Shin, Saemi Lee, Minsoo Kim, Sungsoo Park, Junehyeong Cho, Thanh Tien Nguyen, Byoungdeog Choi

    Transparent oxide semiconductors are promising materials due to their various benefits, such as high mobility and cost-efficient production. However, oxide semiconductors fabricated using the sputtering method require an additional postannealing process at a high temperature, which hinders their fabrication on plastic substrates and application to flexible devices. In addition, one of the critical drawbacks of oxide semiconductors is the shortage of p-type materials. Tin monoxide (SnO), a p-type oxide semiconductor, has the advantages of high mobility and low-temperature production. To address the aforementioned limitations, this study investigates the simultaneous low-temperature process on tin-based oxide semiconductors; p-type SnOx and n-type amorphous indium gallium tin oxide (In:Ga:Sn = 7:1:2). By integrating two optimized thin-film transistors (TFTs) under postann-ealing temperature of 180 °C, we fabricated a tin-based oxide semiconductor complementary inverter, with a high voltage gain (98.0); a noise margin high ( ${\text {NM}_{H}}$ ) and noise margin low ( ${\text {NM}_{L}}$ ) of 13.9 (46.3% of ${V} _{\text {DD}}$ ) and 13.3 V (44.3% of ${V} _{\text {DD}}$ ) at a ${V} _{\text {DD}}$ of 30 V, respectively, were also recorded. For further investigation, we fabricated a comple- mentary inverter on a plastic substrate. The fabricated device exhibited remarkable bias stress stability with excellent electrical characteristics: ${\text {NM}_{H}}$ of 3.9 V (39.0% of ${V} _{\text {DD}}$ ), ${\text {NM}_{L}}$ of 4.5 V (45.0% of ${V} _{\text {DD}}$ ), and a high voltage gain of 114.5 at a ${V} _{\text {DD}}$ of 10 V, thus demonstrating admirable application to flexible devices.


  • Oxidative Stability and Volatile Formations in Linoleic Acid‐D2O Models in the Presence of Deuteron or Electron Donors

    by Sumi Oh, Chankyu Lee, SungHwa Kim, HyungSeok Choi, Mi‐Ja Kim, JaeHwan Lee

    Effects of deuteron (D+) and electron donors on the oxidative stability in linoleic acid–water model systems were evaluated by analyzing headspace oxygen content and headspace volatiles. Acetic acid‐d and tetrakis(dimethylamino)ethylene (TDAE) were selected as a deuteron and an electron donor, respectively. Samples containing acetic acid‐d had significantly lower headspace oxygen content than controls while those containing TDAE had significantly higher headspace oxygen content (p < 0.05). Combination of acetic acid‐d and TDAE accelerated the consumption of headspace oxygen. Volatiles including t‐2‐heptenal, 2‐octenal, or 2,4‐octadienal had higher mass to charge ratio (m/z) of (molecular weight +1)/molecular weight in samples with deuterium oxide than in samples with deuterium free water. However, no significant difference was observed in the m/z ratio of (molecular weight +1)/molecular weight of those volatiles among samples with or without deuteron or electron donors. Also, lipid hydroperoxides with deuterium, were not found in samples containing deuterium oxide and acetic acid‐d. Therefore, added acetic acid‐d may not be involved on the formation of lipid hydroperoxides and volatiles directly.