JRJohn Rollinson

John Rollinson

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


John Rollinson has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Top-Illuminated Annular Ge-on-Si APD in 45-nm Lateral SOI Process With High Gain–Bandwidth Product at 4 V Reverse Bias

    by Nabil Shehtab Dhrubo, John W. Rollinson, Robert F. Karlicek, Mona M. Hella

    A top-illuminated Ge-on-Si avalanche photodiode is designed and fabricated in GlobalFoundries’ 45-nm SOI platform (Si Photonic). The device utilizes an annular-shaped germanium layer as the absorption region, enclosed by cathode contacts to ensure avalanche multiplication of photocarriers and flow of photocurrent from all directions to the central anode. The proposed device structure modification results in an increased gain within a small silicon area. The device utilizes a germanium width of $0.8~\mu $ m to reduce the carrier transit time and achieve high optoelectronic bandwidth. Testing is performed using 940- and 1550-nm wavelength continuous wave lasers. At a reverse bias of 4 V, the device shows a peak gain of 3.5 and 8.6 at 940- and 1550-nm wavelength, respectively. At the same bias, a -3-dB optoelectronic bandwidth of around 13.4 GHz is observed for 1550-nm wavelength. This results in a gain-bandwidth product (GBP) of ~115 GHz at 1550-nm wavelength for a low reverse bias of 4 V.


  • Scalable free-space photonic antennas in foundry SOI silicon photonic platforms

    by John Rollinson, Robert F. Karlicek, Mona M. Hella

    We present a flexible, scalable, and low-noise design scheme for coupling free-space light into a silicon-on-insulator (SOI) electronic-photonic integrated circuit. The proposed scheme utilizes arrays of grating couplers with compact, inverse-designed power combining networks to couple a distributed optical collection area to a single output waveguide, forming a photonic antenna. Fabrication density compliance is maintained regardless of the antenna size, and the collection area can be scaled while maintaining a fixed noise floor. Using experimental grating array antennas fabricated in the GF45CLO platform, we demonstrate up to a 6.7× increase in the signal-to-noise ratio (SNR) of a lens-less monolithic free-space photonic receiver using a 4×4 grating array.

  • Inverse-Designed 16-Channel Time-of-Flight Receiver in 45nm Silicon Photonic Process

    by John Rollinson, Robert Karlicek, Mona Hella

    A 16-channel monolithic electronic-photonic receiver for flash time-of-flight LIDAR is demonstrated in 45nm silicon photonic process. Enverse-designed grating array antennas are utilized for efficient, low-noise coupling of free-space light, thus improving signal-to-noise ratio and extending sensing range of the free-space optical receiver.

  • Inverse-Designed Grating Arrays for High-Sensitivity Plenoptic Time-of-Flight Pixels

    by John Rollinson, Robert Karlicek, Mona Hella

    We present a plenoptic time-of-flight pixel design using grating arrays with inverse-designed passive photonic power combining to achieve scalable signal-to-noise ratio. Experimental results are presented as a proof-of-principle demonstration of the pixel architecture.


  • A CMOS Fully Integrated 4 × 4 VLC-Compliant Receiver Array With 2.5 Gb/s per Channel

    by Bassem Fahs, John Rollinson, Mona Mostafa Hella

    This paper presents a fully integrated 4×4 receiver array implemented in AMS 0.35 μm CMOS technology for high data rate visible-light-communication (VLC) indoor applications. Each receiver channel is composed of a digitally stabilized transimpedance amplifier, a programmable equalizer, an automatic gain-control (AGC) circuit, a programmable-gain output buffer, and a dual offset-cancellation network. The receiver exhibits 106 dBΩ maximum gain with –28 dBm 1-dB input compression power. A gain control range of 50~60 dB is achieved using a Gilbert-type linear variable-gain-amplifier (VGA). A parasitic-BJT based exponential function is employed to achieve dB-linear VGA control and an AGC constant settling time. Each of the 16 receiver channels delivers up to 3-Gb/s OOK data-rate with a VLC-compliant bit-error-rate (BER < 10-3) over a 3-m link distance with an input OOK sensitivity of –24 dBm from a 5-GHz bandwidth laser-diode at 680 nm wavelength. Extended dual-MIMO testing to a full 16-channel MIMO scenario would deliver 40 Gb/s total capacity based on the measured BER margin at 2.5 Gb/s data-rate. The receiver total area is 4.1×4.1 mm2 and each channel consumes around 230 mW from a 3.3-V DC supply.


  • Thin-film lithium niobate modulators for non-invasive sensing of high-frequency electric fields

    by John Rollinson, Mona Hella, Seyfollah Toroghi, Payam Rabiei, Ingrid Wilke

    We propose a non-invasive, large-bandwidth electro-optic (EO) detection scheme for high-frequency electric fields using thin-film lithium niobate Mach–Zehnder interferometers. Our proof-of-concept device is capable of detecting high-strength electric fields, such as those present in x-ray free electron lasers and linear accelerators. The proposed detection scheme utilizes an off-the-shelf C-band fiber optic continuous-wave laser and optical spectrum analyzer, which has a lower system cost and footprint compared to bulk-crystal-based schemes. Towards this objective, fabricated devices are characterized in the 1–40 GHz frequency range to estimate the detection threshold, detection bandwidth, and EO modulation strength. The characterized device exhibits a 0.13 V ⋅ m − 1 ⋅ H z − 1 / 2 normalized electric field sensitivity. By extrapolating the measured frequency response, it is expected that the characterized device will be able to detect free-space electric fields up to 150 GHz.