Ying Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Ying Zhao has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Adrian Chasin
IMEC
5 shared publications - Attilio Belmonte
IMEC
5 shared publications - Ben Kaczer
IMEC
4 shared publications - Jacopo Franco
IMEC
4 shared publications - Pietro Rinaudo
KU Leuven, Leuven, Belgium
4 shared publications - Subhali Subhechha
IMEC, Leuven, Belgium
3 shared publications
Latest Publications
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP (00189383) , 1-6
Finite Element Framework for Electrostatics and Optical Simulations in IGZO TFTs—Part 2: Application
We apply our finite element-based framework, introduced in Part 1, to understand the effects of channel thickness and doping on the degradation of indium–gallium–zinc oxide (IGZO)-based thin-film transistors (TFTs) with different architectures. By taking into account only experimentally extracted band alignments and amorphous semiconductor-specific physics, it is possible to explain apparent discrepancies in previously reported positive bias temperature instabilities (PBTI) trends. Our analysis shows that common PBTI benchmarks used in standard inversion-mode bulk Si devices cannot be employed in thin-film accumulation-mode IGZO devices. Finally, based on these insights, we propose device optimization strategies to reduce the electron trapping component of PBTI in amorphous IGZO TFTs.
- 27 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP (00189383) , 1-6
Finite Element Framework for Electrostatics and Optical Simulations in IGZO TFTs—Part 2: Application
We apply our finite element-based framework, introduced in Part 1, to understand the effects of channel thickness and doping on the degradation of indium–gallium–zinc oxide (IGZO)-based thin-film transistors (TFTs) with different architectures. By taking into account only experimentally extracted band alignments and amorphous semiconductor-specific physics, it is possible to explain apparent discrepancies in previously reported positive bias temperature instabilities (PBTI) trends. Our analysis shows that common PBTI benchmarks used in standard inversion-mode bulk Si devices cannot be employed in thin-film accumulation-mode IGZO devices. Finally, based on these insights, we propose device optimization strategies to reduce the electron trapping component of PBTI in amorphous IGZO TFTs.
- 8 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP (00189383) , 1-8
Finite-Element Framework for Electrostatics and Optical Simulations in IGZO TFTs—Part I: Modeling
We present a finite-element-based 1-D formalism to solve the Poisson equation for a thin-film transistor with a floating body. We apply our framework to InGaZnO (IGZO)-based devices, taking into account its subgap density of states (DoS), revealing its impact on device electrostatics, which is fundamental for predicting device performance and reliability. Our simple 1-D approach yields identical results as the more computationally intensive 2-D TCAD implementations, and it enables the convenient implementation of physics-based IGZO-specific models. Finally, we apply the new framework to quantify the IGZO deep subgap DoS measured by light-assisted $I$ – $V$ spectroscopy.
- 8 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. PP (00189383) , 1-8
Finite-Element Framework for Electrostatics and Optical Simulations in IGZO TFTs—Part I: Modeling
We present a finite-element-based 1-D formalism to solve the Poisson equation for a thin-film transistor with a floating body. We apply our framework to InGaZnO (IGZO)-based devices, taking into account its subgap density of states (DoS), revealing its impact on device electrostatics, which is fundamental for predicting device performance and reliability. Our simple 1-D approach yields identical results as the more computationally intensive 2-D TCAD implementations, and it enables the convenient implementation of physics-based IGZO-specific models. Finally, we apply the new framework to quantify the IGZO deep subgap DoS measured by light-assisted $I$ – $V$ spectroscopy.
- 19 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Band Tail State Broadening in IGZO TFTs After pBTI-Induced Negative V T Shift Revealed via DC and 1/f Noise Measurements
investigate the origin of negative threshold voltage shifts in back-gated amorphous IGZO TFTs under positive bias and high temperature stress. Combined DC and 1/f noise measurements reveal that the stress does not generate new dielectric traps but instead broadens the IGZO conduction band tail states. A recovery experiment confirms that the associated threshold voltage, subthreshold swing, and noise degradation are reversible. Simulations using an in-house Poisson solver confirm the experimental observations that high-temperature stress increases hydrogen doping and the density of sub-gap states.
- 19 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. PP (07413106) , 1
Band Tail State Broadening in IGZO TFTs After pBTI-Induced Negative V T Shift Revealed via DC and 1/f Noise Measurements
investigate the origin of negative threshold voltage shifts in back-gated amorphous IGZO TFTs under positive bias and high temperature stress. Combined DC and 1/f noise measurements reveal that the stress does not generate new dielectric traps but instead broadens the IGZO conduction band tail states. A recovery experiment confirms that the associated threshold voltage, subthreshold swing, and noise degradation are reversible. Simulations using an in-house Poisson solver confirm the experimental observations that high-temperature stress increases hydrogen doping and the density of sub-gap states.
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Subthreshold swing behavior in amorphous indium-gallium-zinc-oxide transistors from room to cryogenic temperatures
While cryogenic-temperature subthreshold swing (SS) in crystalline semiconductors has been widely studied, a careful study on the temperature-dependent SS in amorphous oxide semiconductors remains lacking. In this paper, a comprehensive analysis of the SS in thin-film transistors with an amorphous indium-gallium-zinc-oxide (IGZO) channel at temperatures from 300 K down to 4 K is presented. Main observations include the following: (1) at room temperature (300 K), the devices exhibit a SS of 61 mV/dec and a low interface trap density of <1011 cm−2. (2) A SS saturation around 40 mV/dec is observed between 200 and 100 K. It is well explained by the electron transport via band tail states with exponential decay (Wt) of 17 meV. (3) At deep cryogenic temperatures, the SS increases significantly, exceeding 200 mV/dec at 4 K. Such high SS values are actually limited by the measurement current range, confirmed by Id − Vg simulations based on the variable range hopping model. This work not only elucidates the SS behavior in amorphous IGZO devices but also provides a deep understanding of the physical mechanisms of electron transport in amorphous semiconductors.
- 9 June 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 126 (23)
Subthreshold swing behavior in amorphous indium-gallium-zinc-oxide transistors from room to cryogenic temperatures
While cryogenic-temperature subthreshold swing (SS) in crystalline semiconductors has been widely studied, a careful study on the temperature-dependent SS in amorphous oxide semiconductors remains lacking. In this paper, a comprehensive analysis of the SS in thin-film transistors with an amorphous indium-gallium-zinc-oxide (IGZO) channel at temperatures from 300 K down to 4 K is presented. Main observations include the following: (1) at room temperature (300 K), the devices exhibit a SS of 61 mV/dec and a low interface trap density of <1011 cm−2. (2) A SS saturation around 40 mV/dec is observed between 200 and 100 K. It is well explained by the electron transport via band tail states with exponential decay (Wt) of 17 meV. (3) At deep cryogenic temperatures, the SS increases significantly, exceeding 200 mV/dec at 4 K. Such high SS values are actually limited by the measurement current range, confirmed by Id − Vg simulations based on the variable range hopping model. This work not only elucidates the SS behavior in amorphous IGZO devices but also provides a deep understanding of the physical mechanisms of electron transport in amorphous semiconductors.
- Open Access
- 27 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (7) , 829
A Physical TCAD Mobility Model of Amorphous In-Ga-Zn-O (a-IGZO) Devices with Spatially Varying Mobility Edges, Band-Tails, and Enhanced Low-Temperature Convergence
Amorphous indium gallium zinc oxide (a-IGZO) is becoming an increasingly important technological material. Transport in this material is conceptualized as the heavy disorder of the material causing a conduction or mobility band-edge that randomly varies and undulates in space across the entire system. Thus, transport is envisioned as being dominated by percolation physics as carriers traverse this varying band-edge landscape of “hills” and “valleys”. It is then something of a missed opportunity to model such a system using only a compact approach—despite this being the primary focus of the existing literature—as such a system can easily be faithfully reproduced as a true microscopic TCAD model with a real physically varying potential. Thus, in this work, we develop such a “microscopic” TCAD model of a-IGZO and detail a number of key aspects of its implementation. We then demonstrate that it can accurately reproduce experimental results and consider the issue of the addition of non-conducting band-tail states in a numerically efficient manner. Finally, two short studies of 3D effects are undertaken to illustrate the utility of the model: specifically, the cases of variation effects as a function of device size and as a function of surface roughness scattering.
- 27 June 2024
- Published by MDPI AG in Micromachines
- Vol. 15 (7) , 829
Open AccessA Physical TCAD Mobility Model of Amorphous In-Ga-Zn-O (a-IGZO) Devices with Spatially Varying Mobility Edges, Band-Tails, and Enhanced Low-Temperature Convergence
Amorphous indium gallium zinc oxide (a-IGZO) is becoming an increasingly important technological material. Transport in this material is conceptualized as the heavy disorder of the material causing a conduction or mobility band-edge that randomly varies and undulates in space across the entire system. Thus, transport is envisioned as being dominated by percolation physics as carriers traverse this varying band-edge landscape of “hills” and “valleys”. It is then something of a missed opportunity to model such a system using only a compact approach—despite this being the primary focus of the existing literature—as such a system can easily be faithfully reproduced as a true microscopic TCAD model with a real physically varying potential. Thus, in this work, we develop such a “microscopic” TCAD model of a-IGZO and detail a number of key aspects of its implementation. We then demonstrate that it can accurately reproduce experimental results and consider the issue of the addition of non-conducting band-tail states in a numerically efficient manner. Finally, two short studies of 3D effects are undertaken to illustrate the utility of the model: specifically, the cases of variation effects as a function of device size and as a function of surface roughness scattering.
- 26 December 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (26) , 263502
High mobility achieved in InGaZnO TFT with vacuum-gap as insulating layer
In this Letter, an amorphous In-Ga-Zn-O (InGaZnO) thin-film transistor (TFT) structure with a vacuum-gap as a dielectric layer is proposed and investigated. Field-effect conduction at the vacuum/InGaZnO interfaces exhibits extraordinary effective mobility (μ) up to 65 ± 20 cm2 V−1 s−1, while the μ is only around 10 cm2 V−1 s−1 at the SiO2/InGaZnO interfaces with similar film processing conditions. Temperature-dependent transport is performed for deeper insight of the physical origin of the much higher μ at the vacuum/InGaZnO interface. We have found the density of states (DOS) of tail states is notably lower for the transport near the vacuum (8 × 1017 compared to 1.1 × 1019 cm−3 eV−1 at the SiO2/vacuum interface). These indicate that traditional dielectric materials like SiO2 have strong effects on the charge transport degradation in InGaZnO TFTs by introducing extra energetic disorders, and the intrinsic charge transport in InGaZnO is potentially approaching those in poly-silicon TFTs. Exploring a high-quality dielectric layer should be one effective way to further optimize the electrical performance in TFTs based on amorphous oxide semiconductors.
- 26 December 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 121 (26) , 263502
High mobility achieved in InGaZnO TFT with vacuum-gap as insulating layer
In this Letter, an amorphous In-Ga-Zn-O (InGaZnO) thin-film transistor (TFT) structure with a vacuum-gap as a dielectric layer is proposed and investigated. Field-effect conduction at the vacuum/InGaZnO interfaces exhibits extraordinary effective mobility (μ) up to 65 ± 20 cm2 V−1 s−1, while the μ is only around 10 cm2 V−1 s−1 at the SiO2/InGaZnO interfaces with similar film processing conditions. Temperature-dependent transport is performed for deeper insight of the physical origin of the much higher μ at the vacuum/InGaZnO interface. We have found the density of states (DOS) of tail states is notably lower for the transport near the vacuum (8 × 1017 compared to 1.1 × 1019 cm−3 eV−1 at the SiO2/vacuum interface). These indicate that traditional dielectric materials like SiO2 have strong effects on the charge transport degradation in InGaZnO TFTs by introducing extra energetic disorders, and the intrinsic charge transport in InGaZnO is potentially approaching those in poly-silicon TFTs. Exploring a high-quality dielectric layer should be one effective way to further optimize the electrical performance in TFTs based on amorphous oxide semiconductors.
- Open Access
- 29 April 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (5) , 707
Variable Range Hopping Model Based on Gaussian Disordered Organic Semiconductor for Seebeck Effect in Thermoelectric Device
We investigate the carrier concentration dependent Seebeck coefficient in Gaussian disordered organic semiconductors (GD-OSs) for thermoelectric device applications. Based on the variable-range hopping (VRH) theory, a general model predicting the Seebeck effect is developed to reveal the thermoelectric properties in GD-OSs. The proposed model could interpret the experimental data on carrier concentration- and temperature-dependence of the Seebeck coefficient, including various kinds of conducting polymer film and small molecule based field-effect transistors (FETs). Compared with the conventional Mott’s VRH and mobility edge model, our model has a much better description of the relationship between the Seebeck coefficient and conductivity. The model could deepen our insight into charge transport in organic semiconductors and provide instructions for the optimization of thermoelectric device performance in a disordered system.
- 29 April 2022
- Published by MDPI AG in Micromachines
- Vol. 13 (5) , 707
Open AccessVariable Range Hopping Model Based on Gaussian Disordered Organic Semiconductor for Seebeck Effect in Thermoelectric Device
We investigate the carrier concentration dependent Seebeck coefficient in Gaussian disordered organic semiconductors (GD-OSs) for thermoelectric device applications. Based on the variable-range hopping (VRH) theory, a general model predicting the Seebeck effect is developed to reveal the thermoelectric properties in GD-OSs. The proposed model could interpret the experimental data on carrier concentration- and temperature-dependence of the Seebeck coefficient, including various kinds of conducting polymer film and small molecule based field-effect transistors (FETs). Compared with the conventional Mott’s VRH and mobility edge model, our model has a much better description of the relationship between the Seebeck coefficient and conductivity. The model could deepen our insight into charge transport in organic semiconductors and provide instructions for the optimization of thermoelectric device performance in a disordered system.