Ting-Chun Lo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ting-Chun Lo has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Benoit Bakeroot
IMEC, Leuven, Belgium
2 shared publications - Dirk Wellekens
IMEC, Leuven, Belgium
2 shared publications - Matteo Borga
IMEC VZW, Leuven, Belgium
2 shared publications - Niels Posthuma
IMEC, Leuven, Belgium
2 shared publications - Stefaan Decoutere
IMEC, 3001 Leuven, Belgium
2 shared publications - Tian-Li Wu
National yang Ming Chiao Tung University
2 shared publications
Latest Publications
- 17 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (8) , 4874-4878
Toward Understanding the Failure Mechanism in p-GaN Gate HEMTs Operating in Reverse Conduction Diode Mode
In this study, we investigate the reverse conduction diode mode failure mechanism in p-GaN gate high electron mobility transistors (HEMTs) using TCAD simulations and emission microscopy (EMMI). First, we observe a significant increase in gate leakage current when $\textit{V}_{\text{DS}}$ is swept to $-$ 15 V while $\textit{V}_{\text{GS}}$ $=$ 0 V, indicating gate breakdown occurring with sufficient negative bias. Second, TCAD simulations are conducted to gain further insight into the failure locations and mechanisms. The simulations reveal high electric fields in the Schottky junction close to the interface between the metal and the p-GaN. This finding suggests that the gate region is likely the location leading to increased gate current and breakdown during the reverse conducting operation of the p-GaN gate HEMT. Lastly, EMMI measurements are performed on a device exhibiting high gate leakage current during reverse conduction diode mode operation. The EMMI results show bright spots in the gate region, which align with the failure location identified by the TCAD simulations. These results emphasize the importance of optimizing the Schottky/p-GaN junction to enhance the robustness of the p-GaN gate HEMT under reverse conduction diode mode operation.
- 17 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 71 (8) , 4874-4878
Toward Understanding the Failure Mechanism in p-GaN Gate HEMTs Operating in Reverse Conduction Diode Mode
In this study, we investigate the reverse conduction diode mode failure mechanism in p-GaN gate high electron mobility transistors (HEMTs) using TCAD simulations and emission microscopy (EMMI). First, we observe a significant increase in gate leakage current when $\textit{V}_{\text{DS}}$ is swept to $-$ 15 V while $\textit{V}_{\text{GS}}$ $=$ 0 V, indicating gate breakdown occurring with sufficient negative bias. Second, TCAD simulations are conducted to gain further insight into the failure locations and mechanisms. The simulations reveal high electric fields in the Schottky junction close to the interface between the metal and the p-GaN. This finding suggests that the gate region is likely the location leading to increased gate current and breakdown during the reverse conducting operation of the p-GaN gate HEMT. Lastly, EMMI measurements are performed on a device exhibiting high gate leakage current during reverse conduction diode mode operation. The EMMI results show bright spots in the gate region, which align with the failure location identified by the TCAD simulations. These results emphasize the importance of optimizing the Schottky/p-GaN junction to enhance the robustness of the p-GaN gate HEMT under reverse conduction diode mode operation.
- 29 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 449-453
Using Gate Leakage Conduction to Understand Positive Gate Bias Induced Threshold Voltage Shift in p-GaN Gate HEMTs
In this work, the gate current characteristics are investigated to explain the threshold voltage shift in AlGaN/GaN high electron mobility transistors (HEMTs) with a p-GaN gate. First, the intrinsic gate current conduction mechanisms are identified: in the low bias range (2.5 V$ < {V}_{G} < $ 4 V), thermionic emission (TE) dominates in the AlGaN/GaN region, whereas in a higher bias range (4 V$ < {V}_{G} < $ 7 V) trap-assisted tunneling (TAT) is occurring in the Schottky/p-GaN region. Secondly, the threshold voltage shift of the stress phase is evaluated by applying a positive gate bias for various stress times. A consistent trap level with an activation energy of${E}_{A}\sim $ 0.6 eV is found. In conclusion, a physical model explaining the negative${V}_{\text {TH}}$ shift by considering TAT via hole transport is proposed.- 29 December 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 70 (2) , 449-453
Using Gate Leakage Conduction to Understand Positive Gate Bias Induced Threshold Voltage Shift in p-GaN Gate HEMTs
In this work, the gate current characteristics are investigated to explain the threshold voltage shift in AlGaN/GaN high electron mobility transistors (HEMTs) with a p-GaN gate. First, the intrinsic gate current conduction mechanisms are identified: in the low bias range (2.5 V$ < {V}_{G} < $ 4 V), thermionic emission (TE) dominates in the AlGaN/GaN region, whereas in a higher bias range (4 V$ < {V}_{G} < $ 7 V) trap-assisted tunneling (TAT) is occurring in the Schottky/p-GaN region. Secondly, the threshold voltage shift of the stress phase is evaluated by applying a positive gate bias for various stress times. A consistent trap level with an activation energy of${E}_{A}\sim $ 0.6 eV is found. In conclusion, a physical model explaining the negative${V}_{\text {TH}}$ shift by considering TAT via hole transport is proposed.