Alexander A. Yuzhakov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Alexander A. Yuzhakov has a total of 52 co-authors. Here are the top co-authors by number of shared publications:
- Natalija Borisovna Astashina
Ye.A. Vagner Perm State Medical University
8 shared publications - Andrey A. Baidarov
Perm National Research Polytechnic University
7 shared publications - Sergey Darchoevich Arutyunov
Federal State Budgetary Educational Institution of Higher Education «Russian University of Medicine» of the Ministry of Health of Russia
7 shared publications - Igor I. Bezukladnikov
Пермский национальный исследовательский политехнический университет
4 shared publications - Igor Bezukladnikov
Department of Automation and Telemechanics, Perm National Research Polytechnic University, 29 Komsomolsky Prospect, 614990 Perm, Russia
3 shared publications А.м. Еловиков
Пермский государственный медицинский университет им. академика Е.А. Вагнера
3 shared publications
Latest Publications
- Open Access
- 23 January 2026
- Published by TIRAZH Publishing House in Actual problems in dentistry
- Vol. 2021 (4) , 233-242
AN ANTHROPOMORPHIC DENTAL ROBOT AS A MODERN MEANS OF IMMERSIVE LEARNING FOR TRAINING AND QUALIFICATION OF MEDICAL PERSONNEL
Subject. The development and implementation of simulation technologies based on the use of robotic systems in modern dental education is conditioned by the need for students to safely and repeatedly practice both clinical manipulations related to dental treatment and the algorithm of actions in emergency situations. The goal is to develop and test a dental anthropomorphic robot for training dentists using simulation cases at the stages of practicing communication skills and practical abilities, both during routine dental care and in emergency situations during outpatient appointments. Methodology. The key solution is the development and physical implementation of a dental anthropomorphic patient robot equipped with integrated Smart–jaw and Smart-tooth systems that allow practicing practical skills in the treatment of caries, pulpitis, and tooth preparation for an artificial crown. A set of clinical cases and linguistic scenarios has been developed that simulate an outpatient dental appointment, during which the patient develops urgent conditions (syncope, anaphylactic shock, collapse). We have created interchangeable modules for practicing injection techniques, equipped with contours to simulate a vein and control pressure, puncture sensors, fluid volume and tourniquet clamping, which allows real-time monitoring of the correctness of the student's actions. Results. The result of the research is an integrated learning system that, due to its maximum realism and immersiveness, allows for the formation of stable communicative and manual skills, clinical thinking and algorithmic actions in critical situations, thereby improving the overall safety and quality of dental care. Conclusion. A combined approach combining traditional training, work on simulators and online modules, using updated robotic complexes, seems to be quite effective in training medical personnel.
- 23 January 2026
- Published by TIRAZH Publishing House in Actual problems in dentistry
- Vol. 2021 (4) , 233-242
Open AccessAN ANTHROPOMORPHIC DENTAL ROBOT AS A MODERN MEANS OF IMMERSIVE LEARNING FOR TRAINING AND QUALIFICATION OF MEDICAL PERSONNEL
Subject. The development and implementation of simulation technologies based on the use of robotic systems in modern dental education is conditioned by the need for students to safely and repeatedly practice both clinical manipulations related to dental treatment and the algorithm of actions in emergency situations. The goal is to develop and test a dental anthropomorphic robot for training dentists using simulation cases at the stages of practicing communication skills and practical abilities, both during routine dental care and in emergency situations during outpatient appointments. Methodology. The key solution is the development and physical implementation of a dental anthropomorphic patient robot equipped with integrated Smart–jaw and Smart-tooth systems that allow practicing practical skills in the treatment of caries, pulpitis, and tooth preparation for an artificial crown. A set of clinical cases and linguistic scenarios has been developed that simulate an outpatient dental appointment, during which the patient develops urgent conditions (syncope, anaphylactic shock, collapse). We have created interchangeable modules for practicing injection techniques, equipped with contours to simulate a vein and control pressure, puncture sensors, fluid volume and tourniquet clamping, which allows real-time monitoring of the correctness of the student's actions. Results. The result of the research is an integrated learning system that, due to its maximum realism and immersiveness, allows for the formation of stable communicative and manual skills, clinical thinking and algorithmic actions in critical situations, thereby improving the overall safety and quality of dental care. Conclusion. A combined approach combining traditional training, work on simulators and online modules, using updated robotic complexes, seems to be quite effective in training medical personnel.
- 24 December 2025
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 3(67),p. 46-58
Тренажёр на основе робота-андроида «Арди» в стоматологической области
В работе проведён сравнительный анализ отечественного антропоморфного стоматологического робота (АСР) и международных аналогов. Предложены направления модернизации АСР: применение методов фотограмметрии для повышения точности оценки результатов выполненного студентом лечения, использование компактных вычислительных модулей nVidia Jetson для уменьшения габаритов установки и способ модификации пластиковых зубов для имитации эмали зубов человека. Достигнутые результаты модернизации позволяют организовать более качественную отработку клинических сценариев студентами-стоматологами. Introduction. Robotic simulators have become an integral component of contemporary dental education. To enhance training effectiveness, a domestic anthropomorphic dental robot was developed. To identify the required improvements to this platform, the capabilities of its foreign counterparts were examined. Comparative analysis made it possible to determine which additional functions should be incorporated into the anthropomorphic simulation robot (ASR) to improve the realism of dental-visit simulation. For each desired function, potential engineering solutions were identified and corresponding prototype models were developed. Objectives.The study aims at conducting a comparative assessment of the ASR relative to modern international analogs, to evaluate its competitive advantages, and to define scientifically grounded pathways for modernization. Methods. The research relied on theoretical analysis. The first part presents a comparative review of several medical robotic systems. The second part evaluates materials used for manufacturing dental phantom teeth. The third part analyzes camera-based measurement methods and assesses the feasibility of applying these techniques in the given setup. Findings. The analysis revealed core limitations of the ASR platform, primarily insufficient simulation of tooth preparation and limited accuracy of the assessment subsystem. To address these issues, several structural enhancements were introduced, including a water-collection system and a moisture- and contamination-protection system. Further evaluation showed that the existing object-measurement method was not optimal with respect to accuracy. As a result, components of a laser-scanning subsystem were integrated, and the required software was developed. Conclusion. The simulator’s performance improved, and user interaction became more consistent with treatment of an actual patient. Measurement accuracy increased from 0.5 mm in the previous system to 0.1 mm in the modernized design. The realism of simulation also improved due to the implementation of water cooling during tooth preparation, mirroring standard clinical practice.
- 24 December 2025
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 3(67),p. 46-58
Тренажёр на основе робота-андроида «Арди» в стоматологической области
В работе проведён сравнительный анализ отечественного антропоморфного стоматологического робота (АСР) и международных аналогов. Предложены направления модернизации АСР: применение методов фотограмметрии для повышения точности оценки результатов выполненного студентом лечения, использование компактных вычислительных модулей nVidia Jetson для уменьшения габаритов установки и способ модификации пластиковых зубов для имитации эмали зубов человека. Достигнутые результаты модернизации позволяют организовать более качественную отработку клинических сценариев студентами-стоматологами. Introduction. Robotic simulators have become an integral component of contemporary dental education. To enhance training effectiveness, a domestic anthropomorphic dental robot was developed. To identify the required improvements to this platform, the capabilities of its foreign counterparts were examined. Comparative analysis made it possible to determine which additional functions should be incorporated into the anthropomorphic simulation robot (ASR) to improve the realism of dental-visit simulation. For each desired function, potential engineering solutions were identified and corresponding prototype models were developed. Objectives.The study aims at conducting a comparative assessment of the ASR relative to modern international analogs, to evaluate its competitive advantages, and to define scientifically grounded pathways for modernization. Methods. The research relied on theoretical analysis. The first part presents a comparative review of several medical robotic systems. The second part evaluates materials used for manufacturing dental phantom teeth. The third part analyzes camera-based measurement methods and assesses the feasibility of applying these techniques in the given setup. Findings. The analysis revealed core limitations of the ASR platform, primarily insufficient simulation of tooth preparation and limited accuracy of the assessment subsystem. To address these issues, several structural enhancements were introduced, including a water-collection system and a moisture- and contamination-protection system. Further evaluation showed that the existing object-measurement method was not optimal with respect to accuracy. As a result, components of a laser-scanning subsystem were integrated, and the required software was developed. Conclusion. The simulator’s performance improved, and user interaction became more consistent with treatment of an actual patient. Measurement accuracy increased from 0.5 mm in the previous system to 0.1 mm in the modernized design. The realism of simulation also improved due to the implementation of water cooling during tooth preparation, mirroring standard clinical practice.
- 1 September 2025
- Published by Allerton Press in Russian Engineering Research
- Vol. 45 (9) , 1288-1289
Improving Wire Supply for Electron Beam Additive Surfacing
A system for wire supply in electron beam additive surfacing is proposed. This system ensures high accuracy in wire supply to the electron beam and effecti
- 1 September 2025
- Published by Allerton Press in Russian Engineering Research
- Vol. 45 (9) , 1288-1289
Improving Wire Supply for Electron Beam Additive Surfacing
A system for wire supply in electron beam additive surfacing is proposed. This system ensures high accuracy in wire supply to the electron beam and effecti
- 21 February 2025
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 4(64),p. 30-38
Способ фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения для минимизации потерь звуковой энергии
Статья посвящена исследованию влияния конструкции устройства фиксации вибрационного акустического излучателя на качество звукопередачи в слуховых имплантатах костной проводимости. Разработано устройство для фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения. Новая конструкция устройства обеспечивает более надёжную фиксацию и снижение потерь звуковой энергии. В результате экспериментальных исследований было показано, что предложенная конструкция позволяет улучшить амплитудно-частотную характеристику и снизить уровень искажений звукового сигнала. Результирующая нелинейность амплитудно-частотной характеристики по итогам измерений предложенной конструкции снизилась более чем на 6 дБ (17 %). Полученные результаты открывают новые перспективы для создания более эффективных и комфортных слуховых имплантатов. Introduction. This paper addresses the pressing challenge of developing effective bone conduction hearing aids. Existing methods for securing vibrating acoustic emitters in such devices have several drawbacks, including unstable connections, sound energy loss, and limited options for individual adjustments. The aim of this study is to design a fixation device for a vibrating acoustic emitter in a bone conduction hearing aid and examine how the pressure connection parameters in the "sound emitter – ear implant" system affect the quality of the transmitted sound. Technical Features of the Fixation Device. A novel fixation device has been developed, incorporating a titanium implant and a polymer ring. This design allows for adjustable pressure between the emitter and the bone, ensuring a secure and stable connection. Additionally, a personalized approach to abutment design—utilizing a parametric computer model created in a three-dimensional design system (such as Compass3D©)—optimizes prosthesis geometry for individual patients. Results. The amplitude-frequency response (AFR) and phase-frequency response (PFR) were measured for two prototype designs: a screw implant with spherical abutments and a screw implant with a vibration-conducting platform. Experimental analysis demonstrated that the proposed innovative fixation method eliminates AFR dips at mid frequencies, which is crucial for speech perception, smooths AFR and PFR curves, resulting in a more natural and balanced sound, reduces AFR nonlinearity by more than 6 dB (17%). Conclusion. The proposed fixation device exhibits high efficiency and significant potential for application in bone conduction hearing aids. Future research will focus on assessing the long-term stability of the system and developing customized solutions tailored to individual patients' needs.
- 21 February 2025
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 4(64),p. 30-38
Способ фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения для минимизации потерь звуковой энергии
Статья посвящена исследованию влияния конструкции устройства фиксации вибрационного акустического излучателя на качество звукопередачи в слуховых имплантатах костной проводимости. Разработано устройство для фиксации вибрационного акустического излучателя слухового аппарата костного звукопроведения. Новая конструкция устройства обеспечивает более надёжную фиксацию и снижение потерь звуковой энергии. В результате экспериментальных исследований было показано, что предложенная конструкция позволяет улучшить амплитудно-частотную характеристику и снизить уровень искажений звукового сигнала. Результирующая нелинейность амплитудно-частотной характеристики по итогам измерений предложенной конструкции снизилась более чем на 6 дБ (17 %). Полученные результаты открывают новые перспективы для создания более эффективных и комфортных слуховых имплантатов. Introduction. This paper addresses the pressing challenge of developing effective bone conduction hearing aids. Existing methods for securing vibrating acoustic emitters in such devices have several drawbacks, including unstable connections, sound energy loss, and limited options for individual adjustments. The aim of this study is to design a fixation device for a vibrating acoustic emitter in a bone conduction hearing aid and examine how the pressure connection parameters in the "sound emitter – ear implant" system affect the quality of the transmitted sound. Technical Features of the Fixation Device. A novel fixation device has been developed, incorporating a titanium implant and a polymer ring. This design allows for adjustable pressure between the emitter and the bone, ensuring a secure and stable connection. Additionally, a personalized approach to abutment design—utilizing a parametric computer model created in a three-dimensional design system (such as Compass3D©)—optimizes prosthesis geometry for individual patients. Results. The amplitude-frequency response (AFR) and phase-frequency response (PFR) were measured for two prototype designs: a screw implant with spherical abutments and a screw implant with a vibration-conducting platform. Experimental analysis demonstrated that the proposed innovative fixation method eliminates AFR dips at mid frequencies, which is crucial for speech perception, smooths AFR and PFR curves, resulting in a more natural and balanced sound, reduces AFR nonlinearity by more than 6 dB (17%). Conclusion. The proposed fixation device exhibits high efficiency and significant potential for application in bone conduction hearing aids. Future research will focus on assessing the long-term stability of the system and developing customized solutions tailored to individual patients' needs.
- Open Access
- 10 February 2025
- Published by TIRAZH Publishing House in Actual problems in dentistry
- Vol. 20 (4) , 168-174
BIONIC EAR AS A NEW SYSTEM FOR REHABILITATION OF PATIENTS WITH MICROTIA
Subject – the technology for prosthetics of patients with microtia (anotia) using the developed design of a bionic auricular prosthesis, the use of which is aimed at replacing facial defects and restoring conductive and mixed hearing. Objectives. To develop a design of a bionic ear prosthesis and a method for its fixation based on the use of biocompatible materials and modern technologies. Methodology. The epithesis is manufactured using computer modeling, using the patient's CT scan as the initial data. The main structural elements (the frame of the external overhead device and the fixation elements) are obtained using 3D printing. The electronic components of the hearing aid, including the sound vibration emitter (transducer) and battery, are located inside the prosthesis structure. Results. The bionic ear prosthesis consists of several structures, including a silicone auricle with an inserted sound processor. The epithesis of the auricle in the structure of the bionic ear prosthesis can be combined – consisting of a polymer frame coated with silicone or completely made of silicone material. The structure can be fixed both with titanium osseointegrative implants and combined implantation systems, including a sleeve made of carbon-carbon composite material of compact structure and a titanium rod, used depending on the existing clinical conditions. The bionic ear prosthesis is integrated into the patient's digital environment based on modern engineering and medical 3D technologies. Conclusion. The proposed approach to auricular prosthetics will allow achieving the naturalness of the replacement structure by introducing bone conduction into its structure of the hearing apparatus.
- 10 February 2025
- Published by TIRAZH Publishing House in Actual problems in dentistry
- Vol. 20 (4) , 168-174
Open AccessBIONIC EAR AS A NEW SYSTEM FOR REHABILITATION OF PATIENTS WITH MICROTIA
Subject – the technology for prosthetics of patients with microtia (anotia) using the developed design of a bionic auricular prosthesis, the use of which is aimed at replacing facial defects and restoring conductive and mixed hearing. Objectives. To develop a design of a bionic ear prosthesis and a method for its fixation based on the use of biocompatible materials and modern technologies. Methodology. The epithesis is manufactured using computer modeling, using the patient's CT scan as the initial data. The main structural elements (the frame of the external overhead device and the fixation elements) are obtained using 3D printing. The electronic components of the hearing aid, including the sound vibration emitter (transducer) and battery, are located inside the prosthesis structure. Results. The bionic ear prosthesis consists of several structures, including a silicone auricle with an inserted sound processor. The epithesis of the auricle in the structure of the bionic ear prosthesis can be combined – consisting of a polymer frame coated with silicone or completely made of silicone material. The structure can be fixed both with titanium osseointegrative implants and combined implantation systems, including a sleeve made of carbon-carbon composite material of compact structure and a titanium rod, used depending on the existing clinical conditions. The bionic ear prosthesis is integrated into the patient's digital environment based on modern engineering and medical 3D technologies. Conclusion. The proposed approach to auricular prosthetics will allow achieving the naturalness of the replacement structure by introducing bone conduction into its structure of the hearing apparatus.
- Open Access
- 22 December 2024
- Published by ECO-Vector LLC in Russian Journal of Dentistry
- Vol. 28 (6) , 634-641
Socioeconomic assessment of investments in dental anthropomorphic robots for practical training of dentistry students
BACKGROUND: Robotics is a rapidly evolving area, especially in medical education, where robots improve the results of training and professional qualification of physicians. Dental anthropomorphic robot (DARs) are valuable tools that assist dentistry students in acquiring practical skills, expanding theoretical knowledge, and improving nonverbal communication skills. Given the current practical training issues, the use of such robots becomes increasingly relevant. However, high production and implementation costs require a detailed economic evaluation to assess the practicality of such devices. AIM: To perform a socioeconomic assessment of investments in DARs for practical training of dentistry students. MATERIALS AND METHODS: A socioeconomic assessment of the use of DARs for practical training of dentistry students at a medical college was performed. The assessment focused on the cost-benefit analysis of implementing DARs for practical training. Cost-effectiveness was assessed using the net present value (NPV), profitability index (PI), internal rate of return (IRR), and payoff period. The data were acquired from the Dentistry training program of the Russian University of Medicine. The data included training costs, robot purchase and maintenance costs, and organization of studies. RESULTS: The use of one robot per 10 students results in a positive NPV of 54,279,963 rubles, with a PI of 5.52, an IRR of 70.79%, and a payoff period of approximately one and two years, respectively. These findings confirm the economic efficiency of the project. When using one robot per one student, the values are negative, indicating the economic inefficiency of this scenario. CONCLUSION: The study showed that the use of DARs for practical training of dentistry students results in a high economic efficiency. High NPV, PI, and IRR values confirm the profitability of the project. Moreover, the robot improves practical skills by increasing the accuracy and speed of dental procedures.
- 22 December 2024
- Published by ECO-Vector LLC in Russian Journal of Dentistry
- Vol. 28 (6) , 634-641
Open AccessSocioeconomic assessment of investments in dental anthropomorphic robots for practical training of dentistry students
BACKGROUND: Robotics is a rapidly evolving area, especially in medical education, where robots improve the results of training and professional qualification of physicians. Dental anthropomorphic robot (DARs) are valuable tools that assist dentistry students in acquiring practical skills, expanding theoretical knowledge, and improving nonverbal communication skills. Given the current practical training issues, the use of such robots becomes increasingly relevant. However, high production and implementation costs require a detailed economic evaluation to assess the practicality of such devices. AIM: To perform a socioeconomic assessment of investments in DARs for practical training of dentistry students. MATERIALS AND METHODS: A socioeconomic assessment of the use of DARs for practical training of dentistry students at a medical college was performed. The assessment focused on the cost-benefit analysis of implementing DARs for practical training. Cost-effectiveness was assessed using the net present value (NPV), profitability index (PI), internal rate of return (IRR), and payoff period. The data were acquired from the Dentistry training program of the Russian University of Medicine. The data included training costs, robot purchase and maintenance costs, and organization of studies. RESULTS: The use of one robot per 10 students results in a positive NPV of 54,279,963 rubles, with a PI of 5.52, an IRR of 70.79%, and a payoff period of approximately one and two years, respectively. These findings confirm the economic efficiency of the project. When using one robot per one student, the values are negative, indicating the economic inefficiency of this scenario. CONCLUSION: The study showed that the use of DARs for practical training of dentistry students results in a high economic efficiency. High NPV, PI, and IRR values confirm the profitability of the project. Moreover, the robot improves practical skills by increasing the accuracy and speed of dental procedures.
- Open Access
- 16 December 2024
- Published by Clinical Dentistry in Clinical Dentistry (Russia)
- Vol. 27 (4) , 61-69
Антропоморфный стоматологический робот в практико-ориентированном образовании: перспективы совершенствования
В статье представлен обзор современных разработок в области антропоморфных стоматологических роботов и их применения в практико-ориентированном образовании. Цель исследования заключается в оценке физических и функциональных аспектов антропоморфности роботов, их влияния на психометрические характеристики обучающихся, а также в анализе перспектив развития данных технологий. В работе рассмотрены ключевые компоненты антропоморфных роботов, такие как датчики движения, системы распознавания эмоций и синтеза речи, а также возможности использования облачных технологий для повышения эффективности образовательного процесса. Полученные результаты демонстрируют, что антропоморфные роботы способствуют улучшению образовательных методик, углублению понимания учебного материала и развитию профессиональных навыков у студентов. Тем не менее отмечены технологические вызовы, требующие дальнейших исследований, включая улучшение реалистичности движений, голосового взаимодействия и интеграции сенсорных систем. Предполагается, что дальнейшее развитие технологий обработки данных и облачных сервисов будет способствовать созданию более интерактивных и адаптивных образовательных платформ, что повысит вовлеченность и удовлетворенность студентов. The article provides an overview of current developments in the field of anthropomorphic dental robots and their application in practice-oriented education. The aim of the study is to assess the physical and functional aspects of robot anthropomorphism, their impact on the psychometric characteristics of students, and to analyze the prospects for the development of these technologies. The paper examines key components of anthropomorphic robots, such as motion sensors, emotion recognition and speech synthesis systems, as well as the potential for using cloud technologies to enhance the efficiency of the educational process. The results demonstrate that anthropomorphic robots contribute to the improvement of educational methods, deepen understanding of the material, and foster the development of professional skills in students. However, technological challenges requiring further research were noted, including improving the realism of movements, voice interaction, and the integration of sensory systems. It is anticipated that further development of data processing technologies and cloud services will contribute to the creation of more interactive and adaptive educational platforms, enhancing student engagement and satisfaction.
- 16 December 2024
- Published by Clinical Dentistry in Clinical Dentistry (Russia)
- Vol. 27 (4) , 61-69
Open AccessАнтропоморфный стоматологический робот в практико-ориентированном образовании: перспективы совершенствования
В статье представлен обзор современных разработок в области антропоморфных стоматологических роботов и их применения в практико-ориентированном образовании. Цель исследования заключается в оценке физических и функциональных аспектов антропоморфности роботов, их влияния на психометрические характеристики обучающихся, а также в анализе перспектив развития данных технологий. В работе рассмотрены ключевые компоненты антропоморфных роботов, такие как датчики движения, системы распознавания эмоций и синтеза речи, а также возможности использования облачных технологий для повышения эффективности образовательного процесса. Полученные результаты демонстрируют, что антропоморфные роботы способствуют улучшению образовательных методик, углублению понимания учебного материала и развитию профессиональных навыков у студентов. Тем не менее отмечены технологические вызовы, требующие дальнейших исследований, включая улучшение реалистичности движений, голосового взаимодействия и интеграции сенсорных систем. Предполагается, что дальнейшее развитие технологий обработки данных и облачных сервисов будет способствовать созданию более интерактивных и адаптивных образовательных платформ, что повысит вовлеченность и удовлетворенность студентов. The article provides an overview of current developments in the field of anthropomorphic dental robots and their application in practice-oriented education. The aim of the study is to assess the physical and functional aspects of robot anthropomorphism, their impact on the psychometric characteristics of students, and to analyze the prospects for the development of these technologies. The paper examines key components of anthropomorphic robots, such as motion sensors, emotion recognition and speech synthesis systems, as well as the potential for using cloud technologies to enhance the efficiency of the educational process. The results demonstrate that anthropomorphic robots contribute to the improvement of educational methods, deepen understanding of the material, and foster the development of professional skills in students. However, technological challenges requiring further research were noted, including improving the realism of movements, voice interaction, and the integration of sensory systems. It is anticipated that further development of data processing technologies and cloud services will contribute to the creation of more interactive and adaptive educational platforms, enhancing student engagement and satisfaction.
- Open Access
- 15 December 2024
- Published by ECO-Vector LLC in Perm Medical Journal
- Vol. 41 (6) , 120-133
The use of anthropomorphic robots for developing empathic disposition as a personal trait among medical university students: a literature review.
Objective. The aim of this literature review is to analyze the psychological mechanisms that influence the development of empathy in medical students through interaction with humanoid robots. This study seeks to identify the factors that contribute to the formation of empathy as a personal trait in future physicians. Main Points. Empathy is a crucial aspect of medical practice, fostering trustful relationships between doctors and patients. Recent research indicates that humanoid robots can be an effective tool for enhancing empathetic skills in medical students. Interaction with these robots activates the same neural networks as human-to-human interactions, including the anterior cingulate cortex, the medial prefrontal cortex, and the mirror neuron system. Cognitive and affective processes, such as emotional intelligence, imitation, and behavioral modeling, play a significant role in shaping empathy. Personal characteristics, such as openness to experience and extraversion, also have a notable impact on students’ ability to empathize when interacting with robots. Conclusion. Anthropomorphic robots can be effectively integrated into educational programs to foster the development of empathy in students. They provide a safe environment for practicing communication and technical skills, while also encouraging emotional engagement and social cognition. Further research may help refine current technologies and methodologies, allowing for a deeper understanding of the neurobiological foundations of empathy in the context of human-robot interaction.
- 15 December 2024
- Published by ECO-Vector LLC in Perm Medical Journal
- Vol. 41 (6) , 120-133
Open AccessThe use of anthropomorphic robots for developing empathic disposition as a personal trait among medical university students: a literature review.
Objective. The aim of this literature review is to analyze the psychological mechanisms that influence the development of empathy in medical students through interaction with humanoid robots. This study seeks to identify the factors that contribute to the formation of empathy as a personal trait in future physicians. Main Points. Empathy is a crucial aspect of medical practice, fostering trustful relationships between doctors and patients. Recent research indicates that humanoid robots can be an effective tool for enhancing empathetic skills in medical students. Interaction with these robots activates the same neural networks as human-to-human interactions, including the anterior cingulate cortex, the medial prefrontal cortex, and the mirror neuron system. Cognitive and affective processes, such as emotional intelligence, imitation, and behavioral modeling, play a significant role in shaping empathy. Personal characteristics, such as openness to experience and extraversion, also have a notable impact on students’ ability to empathize when interacting with robots. Conclusion. Anthropomorphic robots can be effectively integrated into educational programs to foster the development of empathy in students. They provide a safe environment for practicing communication and technical skills, while also encouraging emotional engagement and social cognition. Further research may help refine current technologies and methodologies, allowing for a deeper understanding of the neurobiological foundations of empathy in the context of human-robot interaction.
- 3 May 2024
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 1(61),p. 35-46
Анализ алгоритмов проведения процедуры самодиагностики в аналого-цифровом преобразователе на основе нейронной сети
Статья посвящена сравнению двух разработанных методов проведения самодиагностики для определения состояния нейронов самомаршрутизирующегося аналого-цифрового преобразователя на базе распределённой системы встроенного контроля и анализу отношения быстродействия к размерам нейронной сети. В основе системы диагностики лежит использование местного фрагментарного устройства управления и метода «эхолокации» для маршрутизации сигналов, которые позволяют исключать из сети отказавшие нейроны, при этом сохраняя возможность измерения на оставшихся в сети исправных нейронах. В результате работы выбран лучший алгоритм из предложенных, разработана структура базовой группы нейронов – «структура с избыточной связью», а также сделан вывод о размере базовой группы нейронов, позволяющей обеспечить высокое быстродействие системы самодиагностики. Кроме того, определены направления дальнейших исследований, связанных с диагностикой системы управления нейрона, использованием нескольких базовых групп нейронов и применением предложенных алгоритмов при высокой нагрузке на аналого-цифровой преобразователь. Introduction. In modern digital control systems, ensuring the reliability of ADCs is topical. Self-diagnosis algorithms are commonly employed to detect and address failures, thereby enhancing reliability. This research aims at developing a novel approach by harnessing the capabilities of a local fragmented control device (LFCD) to identify failures in the main measuring neuron (MMN) system, followed by the exclusion of the failed MMN from the neural network. Materials and Methods. The study applied self-diagnosis algorithms to identify failed MMNs for two neural network structures: the "Internal Feedback Structure" and the "Redundant Link Structure." Graphical interpretations of the operation sequence are provided for cases of complete uncertainty, where the state of all neurons from the base group is unknown, and for cases of the unknown state of one neuron. The concept of the base group is introduced as the minimum number of neurons required for self-diagnosis. Results and Conclusion. In the MatLab Simulink environment, we developed a model to compare neural network structures and self-diagnosis algorithms. We utilized this model to investigate the algorithm complexity and total time required for neural network analysis based on the number of tested neurons. Our findings demonstrated that for the "Internal Feedback Structure," the base group consists of 2m MMNs, where m represents the ADC resolution during self-diagnosis, while for the "Redundant Link Structure," it is 2m+1. The analysis highlighted that the "Redundant Link Structure" and selecting parameter m=3 represent the most optimal solution, offering shorter verification time and requiring less hardware resources while maintaining other characteristics. Practical Significance. Research findings will enable subsequent self-diagnosis of control system elements and developing a diagnostic algorithm that ensures parallel checking in different areas of neural networks and the process of analog-to-digital conversion on the free part.
- 3 May 2024
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 1(61),p. 35-46
Анализ алгоритмов проведения процедуры самодиагностики в аналого-цифровом преобразователе на основе нейронной сети
Статья посвящена сравнению двух разработанных методов проведения самодиагностики для определения состояния нейронов самомаршрутизирующегося аналого-цифрового преобразователя на базе распределённой системы встроенного контроля и анализу отношения быстродействия к размерам нейронной сети. В основе системы диагностики лежит использование местного фрагментарного устройства управления и метода «эхолокации» для маршрутизации сигналов, которые позволяют исключать из сети отказавшие нейроны, при этом сохраняя возможность измерения на оставшихся в сети исправных нейронах. В результате работы выбран лучший алгоритм из предложенных, разработана структура базовой группы нейронов – «структура с избыточной связью», а также сделан вывод о размере базовой группы нейронов, позволяющей обеспечить высокое быстродействие системы самодиагностики. Кроме того, определены направления дальнейших исследований, связанных с диагностикой системы управления нейрона, использованием нескольких базовых групп нейронов и применением предложенных алгоритмов при высокой нагрузке на аналого-цифровой преобразователь. Introduction. In modern digital control systems, ensuring the reliability of ADCs is topical. Self-diagnosis algorithms are commonly employed to detect and address failures, thereby enhancing reliability. This research aims at developing a novel approach by harnessing the capabilities of a local fragmented control device (LFCD) to identify failures in the main measuring neuron (MMN) system, followed by the exclusion of the failed MMN from the neural network. Materials and Methods. The study applied self-diagnosis algorithms to identify failed MMNs for two neural network structures: the "Internal Feedback Structure" and the "Redundant Link Structure." Graphical interpretations of the operation sequence are provided for cases of complete uncertainty, where the state of all neurons from the base group is unknown, and for cases of the unknown state of one neuron. The concept of the base group is introduced as the minimum number of neurons required for self-diagnosis. Results and Conclusion. In the MatLab Simulink environment, we developed a model to compare neural network structures and self-diagnosis algorithms. We utilized this model to investigate the algorithm complexity and total time required for neural network analysis based on the number of tested neurons. Our findings demonstrated that for the "Internal Feedback Structure," the base group consists of 2m MMNs, where m represents the ADC resolution during self-diagnosis, while for the "Redundant Link Structure," it is 2m+1. The analysis highlighted that the "Redundant Link Structure" and selecting parameter m=3 represent the most optimal solution, offering shorter verification time and requiring less hardware resources while maintaining other characteristics. Practical Significance. Research findings will enable subsequent self-diagnosis of control system elements and developing a diagnostic algorithm that ensures parallel checking in different areas of neural networks and the process of analog-to-digital conversion on the free part.
- 3 May 2024
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 1(61),p. 70-76
Применение регрессионных моделей в задачах повышения отказоустойчивости газотурбинных двигателей
Рассмотрен подход к повышению отказоустойчивости газотурбинных двигателей за счёт использования экспериментальных математических моделей. Определена структура математических моделей. Рассмотрен аппарат регрессионных моделей. Приведены результаты обучения и адекватность предложенных регрессионных моделей. Проведён анализ регрессионных моделей для основных параметров газотурбинного двигателя. Introduction. Improving the fault tolerance of automatic control systems (ACS) for gas turbine engines (GTE) relies on structural redundancy, achieved by duplicating measurement channels for key engine parameters. However, determining which channel provides dependable information poses a challenge. A solution proposed involves employing an integrated mathematical model as an "arbitrator". This article focuses on presenting regression models for the main parameters of a gas turbine engine. The study aims at developing a GTE parameter model based on regression models, assess the models' adequacy on both training and predictive datasets, and identify the optimal mathematical model. The article addresses the mathematical model structure of GTE main parameters, presents an experiment setup methodology, examines linear and polynomial regression models, calculates model adequacy, and selects the best models. Findings and conclusion. Regression models using machine learning were built to evaluate the GTE main parameters. During model analysis, various mathematical combinations of the main parameters were considered alongside the main parameters themselves. The research identified significant model regressors and optimal models based on the learning algorithm. A comprehensive analysis of model adequacy revealed satisfactory results for the parameters (P2; hnc; αвна; n2; n1), while the search for alternative model types for the parameters (T4; αди; αруд) is proposed.
- 3 May 2024
- Published by Volga State University of Technology in Vestnik of Volga State University of Technology. Series Radio Engineering and Infocommunication Systems
- No. 1(61),p. 70-76
Применение регрессионных моделей в задачах повышения отказоустойчивости газотурбинных двигателей
Рассмотрен подход к повышению отказоустойчивости газотурбинных двигателей за счёт использования экспериментальных математических моделей. Определена структура математических моделей. Рассмотрен аппарат регрессионных моделей. Приведены результаты обучения и адекватность предложенных регрессионных моделей. Проведён анализ регрессионных моделей для основных параметров газотурбинного двигателя. Introduction. Improving the fault tolerance of automatic control systems (ACS) for gas turbine engines (GTE) relies on structural redundancy, achieved by duplicating measurement channels for key engine parameters. However, determining which channel provides dependable information poses a challenge. A solution proposed involves employing an integrated mathematical model as an "arbitrator". This article focuses on presenting regression models for the main parameters of a gas turbine engine. The study aims at developing a GTE parameter model based on regression models, assess the models' adequacy on both training and predictive datasets, and identify the optimal mathematical model. The article addresses the mathematical model structure of GTE main parameters, presents an experiment setup methodology, examines linear and polynomial regression models, calculates model adequacy, and selects the best models. Findings and conclusion. Regression models using machine learning were built to evaluate the GTE main parameters. During model analysis, various mathematical combinations of the main parameters were considered alongside the main parameters themselves. The research identified significant model regressors and optimal models based on the learning algorithm. A comprehensive analysis of model adequacy revealed satisfactory results for the parameters (P2; hnc; αвна; n2; n1), while the search for alternative model types for the parameters (T4; αди; αруд) is proposed.