Yu. A. Kravchenko
Research Subjects
Yu. A. Kravchenko has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Aleksandr Yu. Baranov
ITMO Univercity
3 shared publications - Anastasia Ikonnikova
National Research University ITMO; LLC "NPP "KRION
2 shared publications - D. V. Kravchenko
National Research University ITMO; LLC "NPP "KRION
2 shared publications - Elena S. Seredenko
ITMO University
1 shared publication - Evgeniya A. Pashkova
Educational Center Energy Efficient Engineering Systems, ITMO University, Russia
1 shared publication - T. A. Malysheva
ITMO University
1 shared publication
Latest Publications
- Open Access
- 1 April 2026
- Published by Technical University of Moldova
- No. 2,p. 124-138
Formation of Temperature Distribution in a Regenerative Heat Exchanger During the Initial Cooling Period of a Cryogenic Reduction Unit of Main Natural Gas
This article examines the startup period of a natural gas pipeline cryogenic reduction unit (CRU) within a gas distribution station (GDS). The objective of the study is to determine the temperature distribution within a regenerative heat exchanger (RHE) during the CRU's initial cooling stage. This objective was achieved through an analysis of primary cooling methods for the regenerator packing and through numerical experiments to determine the optimal filtration rate and switching time. The study involved a CRU operating on a simple throttling cycle and using RHE. The numerical experiments yielded the optimal filtration rate and blast duration for the natural gas pipeline. Software was developed using a mathematical model of the CRU and implemented in the Python programming language. The most important result is the shape of the temperature distribution curve across the packing bed height during the initial startup of the CRU. Based on the research conducted, it has been shown that increasing the steady-state operating time of the CRU is accompanied by an expansion of the zone of active heat transfer to the upper portion of the packed heat exchanger. The significance of these results lies in the development of a methodology for studying the formation and height distribution of temperatures within the CRU's regenerative heat exchanger. This allows for an analysis of its operating efficiency during the initial cooling period and paves the way for further research under conditions of daily uneven gas consumption in the city network
- 1 April 2026
- Published by Technical University of Moldova
- No. 2,p. 124-138
Open AccessFormation of Temperature Distribution in a Regenerative Heat Exchanger During the Initial Cooling Period of a Cryogenic Reduction Unit of Main Natural Gas
This article examines the startup period of a natural gas pipeline cryogenic reduction unit (CRU) within a gas distribution station (GDS). The objective of the study is to determine the temperature distribution within a regenerative heat exchanger (RHE) during the CRU's initial cooling stage. This objective was achieved through an analysis of primary cooling methods for the regenerator packing and through numerical experiments to determine the optimal filtration rate and switching time. The study involved a CRU operating on a simple throttling cycle and using RHE. The numerical experiments yielded the optimal filtration rate and blast duration for the natural gas pipeline. Software was developed using a mathematical model of the CRU and implemented in the Python programming language. The most important result is the shape of the temperature distribution curve across the packing bed height during the initial startup of the CRU. Based on the research conducted, it has been shown that increasing the steady-state operating time of the CRU is accompanied by an expansion of the zone of active heat transfer to the upper portion of the packed heat exchanger. The significance of these results lies in the development of a methodology for studying the formation and height distribution of temperatures within the CRU's regenerative heat exchanger. This allows for an analysis of its operating efficiency during the initial cooling period and paves the way for further research under conditions of daily uneven gas consumption in the city network
- Open Access
- 10 August 2025
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 52 (2) , 27-41
Modification of the Mixed Fluid Cascade cycle with heat recovery of the working fluid reverse flows and optimised natural gas flow pressure
Objective. The paper investigates the feasibility of heat recovery from reverse flows in the Mixed Fluid Cascade cycle, highlighting its positive impact on specific energy consumption for liquefied natural gas (LNG) production. Method. The study employs mathematical modeling to analyze both the basic and modified cycle operations. The modified version incorporates heat exchangers in the liquefaction and subcooling stages, allowing reverse flows to be heated by direct flow heat. Additionally, a booster compressor for the feed natural gas flow is introduced to enhance energy efficiency. Result. The numerical experiments assess how variations in feed flow pressure, heat under-recovery in heat exchangers, and their configuration affect specific energy consumption and mass flow rates in the cycle's external cooling stages. Results indicate that thermal load can be redistributed towards high-temperature stages, leading to a reduction in specific energy consumption for LNG production. Conclusion. Overall, the research demonstrates the potential benefits of implementing heat recovery strategies in the Mixed Fluid Cascade cycle, contributing to more efficient LNG production processes.
- 10 August 2025
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 52 (2) , 27-41
Open AccessModification of the Mixed Fluid Cascade cycle with heat recovery of the working fluid reverse flows and optimised natural gas flow pressure
Objective. The paper investigates the feasibility of heat recovery from reverse flows in the Mixed Fluid Cascade cycle, highlighting its positive impact on specific energy consumption for liquefied natural gas (LNG) production. Method. The study employs mathematical modeling to analyze both the basic and modified cycle operations. The modified version incorporates heat exchangers in the liquefaction and subcooling stages, allowing reverse flows to be heated by direct flow heat. Additionally, a booster compressor for the feed natural gas flow is introduced to enhance energy efficiency. Result. The numerical experiments assess how variations in feed flow pressure, heat under-recovery in heat exchangers, and their configuration affect specific energy consumption and mass flow rates in the cycle's external cooling stages. Results indicate that thermal load can be redistributed towards high-temperature stages, leading to a reduction in specific energy consumption for LNG production. Conclusion. Overall, the research demonstrates the potential benefits of implementing heat recovery strategies in the Mixed Fluid Cascade cycle, contributing to more efficient LNG production processes.
- Open Access
- 8 May 2023
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 50 (1) , 6-14-14
Modeling of regasification and recirculation processes during the transportation of liquefied natural gas
Objective. The purpose of the research is modeling and analysis of technological processes occurring at the transshipment terminal of liquefied natural gas.Method. The study is based on the methods of thermodynamic analysis, full-scale and computational modeling of processes and objects of refrigeration and cryogenic equipment in order to find optimal solutions in terms of efficiency, reliability and service life of low-temperature installations, machines and apparatus.Result. The article describes the operation algorithm of an LNG transshipment terminal and proposes a mathematical apparatus for modeling the technological processes occurring in it. Information about the causes of the formation of LNG vapors (Boil-off gas (BOG)) during its transportation and reloading is presented, methods for utilizing excess LNG vapors are considered.Conclusion. To maintain the cryogenic temperature of the unloading arms, an LNG recirculation line (recirculation pipelines) is provided.
- 8 May 2023
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 50 (1) , 6-14-14
Open AccessModeling of regasification and recirculation processes during the transportation of liquefied natural gas
Objective. The purpose of the research is modeling and analysis of technological processes occurring at the transshipment terminal of liquefied natural gas.Method. The study is based on the methods of thermodynamic analysis, full-scale and computational modeling of processes and objects of refrigeration and cryogenic equipment in order to find optimal solutions in terms of efficiency, reliability and service life of low-temperature installations, machines and apparatus.Result. The article describes the operation algorithm of an LNG transshipment terminal and proposes a mathematical apparatus for modeling the technological processes occurring in it. Information about the causes of the formation of LNG vapors (Boil-off gas (BOG)) during its transportation and reloading is presented, methods for utilizing excess LNG vapors are considered.Conclusion. To maintain the cryogenic temperature of the unloading arms, an LNG recirculation line (recirculation pipelines) is provided.