Laurel George
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Laurel George has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
Richard Wuhrer
Western Sydney University , Advanced Materials Characterisation Facility, Rydalmere , Australia
5 shared publications- Richard Wuhrer
Advanced Materials Characterisation Facility, Western Sydney University, Penrith, NSW 2750, Australia
4 shared publications - Antonio Lauto
School of Science, Western Sydney University, Locked Bag 1797, Penrith, New South Wales 2751, Australia
3 shared publications - Damia Mawad
School of Materials Science and Engineering UNSW Sydney Sydney New South Wales 2052 Australia
3 shared publications - James M. Hook
University of New South Wales
3 shared publications - Jessica Houang
School of Science, Western Sydney University, Penrith, NSW 2750, Australia
3 shared publications
Latest Publications
- Open Access
- 9 October 2026
- Published by Wiley in New Phytologist
- Vol. 252 (5) , 1799-1815
Climate drivers of mesophyll conductance: temperature and water deficit alter CO 2 diffusion and leaf anatomy in cotton
Summary: Mesophyll conductance ( g m ) limits CO 2 delivery to Rubisco, yet its responses to temperature, heat and water deficit are poorly resolved in cotton ( Gossypium hirsutum ). We characterised photosynthetic and g m temperature responses in five Gossypium species, then examined cultivated G. hirsutum and the Australian native Gossypium bickii under combined elevated temperature and soil water deficit to link physiological responses with mesophyll anatomy. Plants were grown under controlled glasshouse conditions. We quantified g m using simultaneous gas exchange and online stable carbon isotope discrimination (Δ, ‰) and measured leaf anatomy. Across species, photosynthesis and g m exhibited broad thermal optima (33–36°C). In G. hirsutum , water deficit at control temperature reduced g m and induced thicker, more porous mesophyll and thicker cell walls, while assimilation declined only under combined heat and water deficit. In G. bickii , g m and assimilation remained stable under combined stress, and g m was stimulated by elevated temperature without anatomical adjustment. g m emerged as a stress‐sensitive trait in cultivated cotton, whereas G. bickii exhibited stress resilience, with responses incompletely explained by anatomical acclimation. Further research on g m responses to environmental stresses and on the mechanisms underpinning these responses is required to inform model development and identify traits for climate resilient crops.
- 9 October 2026
- Published by Wiley in New Phytologist
- Vol. 252 (5) , 1799-1815
Open AccessClimate drivers of mesophyll conductance: temperature and water deficit alter CO 2 diffusion and leaf anatomy in cotton
Summary: Mesophyll conductance ( g m ) limits CO 2 delivery to Rubisco, yet its responses to temperature, heat and water deficit are poorly resolved in cotton ( Gossypium hirsutum ). We characterised photosynthetic and g m temperature responses in five Gossypium species, then examined cultivated G. hirsutum and the Australian native Gossypium bickii under combined elevated temperature and soil water deficit to link physiological responses with mesophyll anatomy. Plants were grown under controlled glasshouse conditions. We quantified g m using simultaneous gas exchange and online stable carbon isotope discrimination (Δ, ‰) and measured leaf anatomy. Across species, photosynthesis and g m exhibited broad thermal optima (33–36°C). In G. hirsutum , water deficit at control temperature reduced g m and induced thicker, more porous mesophyll and thicker cell walls, while assimilation declined only under combined heat and water deficit. In G. bickii , g m and assimilation remained stable under combined stress, and g m was stimulated by elevated temperature without anatomical adjustment. g m emerged as a stress‐sensitive trait in cultivated cotton, whereas G. bickii exhibited stress resilience, with responses incompletely explained by anatomical acclimation. Further research on g m responses to environmental stresses and on the mechanisms underpinning these responses is required to inform model development and identify traits for climate resilient crops.
- Open Access
- 1 January 2025
- Published by ScienceOpen
- p. e393
Microanalysis and X-Ray Mapping of Plant Material: Sample Preparation, Instrument Operation and XRM Processing Considerations
The use of microanalysis and X-ray mapping (XRM) techniques to locate, identify and spatially map elements in plant materials is of growing interest in the area of plant sciences. Some recent examples include the use of XRM to examine silicon deposition in grass leaf guard cells [ 1- 2], locate calcium oxalate in Eucalyptus leaves [ 3], and assess concentrations of salts in germinating seeds [ 4] and grass leaf tissues [ 5]. The increasing use of XRM in plant sciences is in a large part due to advancements associated with instrument hardware and analysis software, reducing the analysis times needed and hence making these techniques more accessible. There is a lot to consider when preparing and analysing plant material, however, such as how the material preparation method affects the results, the SEM/XRM settings and conditions used for the analysis, and lastly the processing of the XRM results. With developments in analysis software, there is now a lot more information that can be extracted. For example, while XRM can be used to colour-code and examine the spatial distribution of elements present in a sample, the X-ray intensity distributions of the elements can also be used to generate two and three-dimensional scatter diagrams. These can then be used to identify and spatially map ratios of elements selected, and chemical phases present [ 6]. In this study, Eucalyptus robusta leaves were used to demonstrate how different sample preparation techniques (e.g. critical point dried samples versus oven dried at 60°C), and different SEM and XRM conditions (e.g. mapping carbon coated samples under high vacuum versus uncoated samples in low vacuum, and the use of different accelerating voltages) can affect XRM results obtained.
- 1 January 2025
- Published by ScienceOpen
- p. e393
Open AccessMicroanalysis and X-Ray Mapping of Plant Material: Sample Preparation, Instrument Operation and XRM Processing Considerations
The use of microanalysis and X-ray mapping (XRM) techniques to locate, identify and spatially map elements in plant materials is of growing interest in the area of plant sciences. Some recent examples include the use of XRM to examine silicon deposition in grass leaf guard cells [ 1- 2], locate calcium oxalate in Eucalyptus leaves [ 3], and assess concentrations of salts in germinating seeds [ 4] and grass leaf tissues [ 5]. The increasing use of XRM in plant sciences is in a large part due to advancements associated with instrument hardware and analysis software, reducing the analysis times needed and hence making these techniques more accessible. There is a lot to consider when preparing and analysing plant material, however, such as how the material preparation method affects the results, the SEM/XRM settings and conditions used for the analysis, and lastly the processing of the XRM results. With developments in analysis software, there is now a lot more information that can be extracted. For example, while XRM can be used to colour-code and examine the spatial distribution of elements present in a sample, the X-ray intensity distributions of the elements can also be used to generate two and three-dimensional scatter diagrams. These can then be used to identify and spatially map ratios of elements selected, and chemical phases present [ 6]. In this study, Eucalyptus robusta leaves were used to demonstrate how different sample preparation techniques (e.g. critical point dried samples versus oven dried at 60°C), and different SEM and XRM conditions (e.g. mapping carbon coated samples under high vacuum versus uncoated samples in low vacuum, and the use of different accelerating voltages) can affect XRM results obtained.
- Open Access
- 24 July 2024
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 30 (Supplement)
To Stain or Not To Stain: Micro-CT Analysis of Eucalyptus Leaves
With Eucalyptus forests accounting for 75% (over 101 million hectares) of Australia’s native forested area and including over 800 species [ 1], the characterisation of Eucalyptus leaves is of great interest in many different fields of research. For example, plant scientists are interested in their growth and tolerance for different climate conditions, animal scientists are interested in diet of the animals which eat the eucalyptus leaves, and fire scientists are interested in understanding how Eucalypts pyrolyse and combust in bushfires.
- 24 July 2024
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 30 (Supplement)
Open AccessTo Stain or Not To Stain: Micro-CT Analysis of Eucalyptus Leaves
With Eucalyptus forests accounting for 75% (over 101 million hectares) of Australia’s native forested area and including over 800 species [ 1], the characterisation of Eucalyptus leaves is of great interest in many different fields of research. For example, plant scientists are interested in their growth and tolerance for different climate conditions, animal scientists are interested in diet of the animals which eat the eucalyptus leaves, and fire scientists are interested in understanding how Eucalypts pyrolyse and combust in bushfires.
- Open Access
Encapsulated Rose Bengal Enhances the Photodynamic Treatment of Triple-Negative Breast Cancer Cells
Among breast cancer subtypes, triple-negative breast cancer stands out as the most aggressive, with patients facing a 40% mortality rate within the initial five years. The limited treatment options and unfavourable prognosis for triple-negative patients necessitate the development of novel therapeutic strategies. Photodynamic therapy (PDT) is an alternative treatment that can effectively target triple-negative neoplastic cells such as MDA-MB-231. In this in vitro study, we conducted a comparative analysis of the PDT killing rate of unbound Rose Bengal (RB) in solution versus RB-encapsulated chitosan nanoparticles to determine the most effective approach for inducing cytotoxicity at low laser powers (90 mW, 50 mW, 25 mW and 10 mW) and RB concentrations (50 µg/mL, 25 µg/mL, 10 µg/mL and 5 µg/mL). Intracellular singlet oxygen production and cell uptake were also determined for both treatment modalities. Dark toxicity was also assessed for normal breast cells. Despite the low laser power and concentration of nanoparticles (10 mW and 5 µg/mL), MDA-MB-231 cells experienced a substantial reduction in viability (8 ± 1%) compared to those treated with RB solution (38 ± 10%). RB nanoparticles demonstrated higher singlet oxygen production and greater uptake by cancer cells than RB solutions. Moreover, RB nanoparticles display strong cytocompatibility with normal breast cells (MCF-10A). The low activation threshold may be a crucial advantage for specifically targeting malignant cells in deep tissues.
Open AccessEncapsulated Rose Bengal Enhances the Photodynamic Treatment of Triple-Negative Breast Cancer Cells
Among breast cancer subtypes, triple-negative breast cancer stands out as the most aggressive, with patients facing a 40% mortality rate within the initial five years. The limited treatment options and unfavourable prognosis for triple-negative patients necessitate the development of novel therapeutic strategies. Photodynamic therapy (PDT) is an alternative treatment that can effectively target triple-negative neoplastic cells such as MDA-MB-231. In this in vitro study, we conducted a comparative analysis of the PDT killing rate of unbound Rose Bengal (RB) in solution versus RB-encapsulated chitosan nanoparticles to determine the most effective approach for inducing cytotoxicity at low laser powers (90 mW, 50 mW, 25 mW and 10 mW) and RB concentrations (50 µg/mL, 25 µg/mL, 10 µg/mL and 5 µg/mL). Intracellular singlet oxygen production and cell uptake were also determined for both treatment modalities. Dark toxicity was also assessed for normal breast cells. Despite the low laser power and concentration of nanoparticles (10 mW and 5 µg/mL), MDA-MB-231 cells experienced a substantial reduction in viability (8 ± 1%) compared to those treated with RB solution (38 ± 10%). RB nanoparticles demonstrated higher singlet oxygen production and greater uptake by cancer cells than RB solutions. Moreover, RB nanoparticles display strong cytocompatibility with normal breast cells (MCF-10A). The low activation threshold may be a crucial advantage for specifically targeting malignant cells in deep tissues.
- Open Access
Photodynamic Treatment of Human Breast and Prostate Cancer Cells Using Rose Bengal-Encapsulated Nanoparticles
Cancer, a prominent cause of death, presents treatment challenges, including high dosage requirements, drug resistance, poor tumour penetration and systemic toxicity in traditional chemotherapy. Photodynamic therapy, using photosensitizers like rose bengal (RB) with a green laser, shows promise against breast cancer cells in vitro. However, the hydrophilic RB struggles to efficiently penetrate the tumour site due to the unique clinical microenvironment, aggregating around rather than entering cancer cells. In this study, we have synthesized and characterized RB-encapsulated chitosan nanoparticles with a peak particle size of ~200 nm. These nanoparticles are readily internalized by cells and, in combination with a green laser (λ = 532 nm) killed 94–98% of cultured human breast cancer cells (MCF-7) and prostate cancer cells (PC3) at a low dosage (25 μg/mL RB-nanoparticles, fluence ~126 J/cm2, and irradiance ~0.21 W/cm2). Furthermore, these nanoparticles are not toxic to cultured human normal breast cells (MCF10A), which opens an avenue for translational applications.
Open AccessPhotodynamic Treatment of Human Breast and Prostate Cancer Cells Using Rose Bengal-Encapsulated Nanoparticles
Cancer, a prominent cause of death, presents treatment challenges, including high dosage requirements, drug resistance, poor tumour penetration and systemic toxicity in traditional chemotherapy. Photodynamic therapy, using photosensitizers like rose bengal (RB) with a green laser, shows promise against breast cancer cells in vitro. However, the hydrophilic RB struggles to efficiently penetrate the tumour site due to the unique clinical microenvironment, aggregating around rather than entering cancer cells. In this study, we have synthesized and characterized RB-encapsulated chitosan nanoparticles with a peak particle size of ~200 nm. These nanoparticles are readily internalized by cells and, in combination with a green laser (λ = 532 nm) killed 94–98% of cultured human breast cancer cells (MCF-7) and prostate cancer cells (PC3) at a low dosage (25 μg/mL RB-nanoparticles, fluence ~126 J/cm2, and irradiance ~0.21 W/cm2). Furthermore, these nanoparticles are not toxic to cultured human normal breast cells (MCF10A), which opens an avenue for translational applications.
- Open Access
- 22 September 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 425
Properties of fly ash-based spray-applied fire resistive materials
- 22 September 2023
- Published by Elsevier in Journal of Cleaner Production
- Vol. 425
Open AccessProperties of fly ash-based spray-applied fire resistive materials
- Open Access
- 3 August 2023
- Published by Springer Nature in Research Square
Sonic-induced cellular vibrations disrupt poricidal cone trichomes to boost tomato floral pollination
Artificial pollination methods rely primarily on air-jets, vibrating wands and trellis tapping which can spread pathogens. This problem can be addressed by non-contact sonic techniques that vibrate cells via sound waves yet how frequency and intensity affect pollination, seed set and fruit size remain unclear. Our study systematic characterizes frequency-dependent vibration events on greenhouse-grown tomato flowers comparing them with contact-induced oscillations from a vibrating wand and a mechanical shaker arm. Sonic vibrations in the frequency range from 50 to 10,000 Hz increased pollination, fruit size, weight, and seed set in Sweetelle and Endeavour commercial varieties. Scanning electron microscopy revealed sonication loosened the trichomes joining the poricidal cone lobes that encase the anthers filled with pollen. Ultra-sonic frequencies enlarged fruit size, whereas seed set remained constant thereby challenging the floral cells power-law rheological characteristics in different frequency scales. Our bioacoustics non-contact precision technology can be used to boost tomato floral self-pollination. Teaser Leveraging bioacoustics from bees and bats to boost precision pollination of tomato flowers and fruit size in commercial varieties
- 3 August 2023
- Published by Springer Nature in Research Square
Open AccessSonic-induced cellular vibrations disrupt poricidal cone trichomes to boost tomato floral pollination
Artificial pollination methods rely primarily on air-jets, vibrating wands and trellis tapping which can spread pathogens. This problem can be addressed by non-contact sonic techniques that vibrate cells via sound waves yet how frequency and intensity affect pollination, seed set and fruit size remain unclear. Our study systematic characterizes frequency-dependent vibration events on greenhouse-grown tomato flowers comparing them with contact-induced oscillations from a vibrating wand and a mechanical shaker arm. Sonic vibrations in the frequency range from 50 to 10,000 Hz increased pollination, fruit size, weight, and seed set in Sweetelle and Endeavour commercial varieties. Scanning electron microscopy revealed sonication loosened the trichomes joining the poricidal cone lobes that encase the anthers filled with pollen. Ultra-sonic frequencies enlarged fruit size, whereas seed set remained constant thereby challenging the floral cells power-law rheological characteristics in different frequency scales. Our bioacoustics non-contact precision technology can be used to boost tomato floral self-pollination. Teaser Leveraging bioacoustics from bees and bats to boost precision pollination of tomato flowers and fruit size in commercial varieties
- Open Access
- 22 July 2023
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (Supplement) , 868-871
The Use of Correlative Micro-CT and XRM to Locate and Identify Dense Structures in Plant Material
The use of X-ray computed microtomography (micro-CT) techniques in the area of plant sciences has increased recently, in a large part due to developments with the associated reconstruction, modelling and analysis software. Advances in instrument hardware and shortened experiment times also mean time on these instruments is becoming more available [ 1]. This is also true for X-ray mapping (XRM), and other hyperspectral imaging.
- 22 July 2023
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (Supplement) , 868-871
Open AccessThe Use of Correlative Micro-CT and XRM to Locate and Identify Dense Structures in Plant Material
The use of X-ray computed microtomography (micro-CT) techniques in the area of plant sciences has increased recently, in a large part due to developments with the associated reconstruction, modelling and analysis software. Advances in instrument hardware and shortened experiment times also mean time on these instruments is becoming more available [ 1]. This is also true for X-ray mapping (XRM), and other hyperspectral imaging.
- Open Access
Thermal and Pyrolysis Kinetics Analysis of Glass Wool and XPS Insulation Materials Used in High-Rise Buildings
This study investigates the kinetics data of glass wool (GW) and extruded polystyrene (XPS) insulation materials used in cladding systems using a systematic framework. The determination of appropriate kinetic properties, such as pre-exponential factors, activation energy and reaction orders, is crucial for accurately modelling the full-scale fire performance of insulation materials. The primary objective of this research is to extract thermal and kinetics data of XPS and GW insulation materials employed in high-rise buildings. To obtain these properties, thermogravimetric analysis (TGA) is conducted at four different heating rates: 5, 10, 15 and 20 K/min. The TGA results serve as the basis for determining the kinetic properties using a combination of model-free and model-based methods. The outcomes of this study are expected to be highly beneficial in defining the pyrolysis reaction steps and extracting kinetics data for fire modelling of such insulation materials. This information will enhance the understanding of the fire behaviour and performance of these materials during fire incidents, aiding in developing more accurate fire models and improving fire safety strategies for cladding systems in high-rise buildings.
Open AccessThermal and Pyrolysis Kinetics Analysis of Glass Wool and XPS Insulation Materials Used in High-Rise Buildings
This study investigates the kinetics data of glass wool (GW) and extruded polystyrene (XPS) insulation materials used in cladding systems using a systematic framework. The determination of appropriate kinetic properties, such as pre-exponential factors, activation energy and reaction orders, is crucial for accurately modelling the full-scale fire performance of insulation materials. The primary objective of this research is to extract thermal and kinetics data of XPS and GW insulation materials employed in high-rise buildings. To obtain these properties, thermogravimetric analysis (TGA) is conducted at four different heating rates: 5, 10, 15 and 20 K/min. The TGA results serve as the basis for determining the kinetic properties using a combination of model-free and model-based methods. The outcomes of this study are expected to be highly beneficial in defining the pyrolysis reaction steps and extracting kinetics data for fire modelling of such insulation materials. This information will enhance the understanding of the fire behaviour and performance of these materials during fire incidents, aiding in developing more accurate fire models and improving fire safety strategies for cladding systems in high-rise buildings.
- 3 January 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (9) , 14389-14398
High-temperature performance of alkali-activated binders of fly ash and calcium aluminate
- 3 January 2023
- Published by Elsevier in Ceramics International
- Vol. 49 (9) , 14389-14398
High-temperature performance of alkali-activated binders of fly ash and calcium aluminate