Jiseul Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiseul Kim has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ho-Jin Song
Pohang University of Science and Technology
4 shared publications - Kangseop Lee
Department of Electrical Engineering, Pohang University of Science and Technology, Pohang, South Korea
3 shared publications - Kyunghwan Kim
Samsung Electronics, Hwaseong, South Korea
3 shared publications Chan-Gyu Choi
School of Electrical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
2 shared publications- Inho Choi
Department of Electrical Engineering, Pohang University of Science and Technology, Pohang, South Korea
2 shared publications Seung-Uk Choi
School of Electrical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, South Korea
2 shared publications
Latest Publications
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (9) , 8445-8460
A D-Band 2-D Phased-Array Transceiver Module With Aperiodic Subarray Configuration in Fan-Out Wafer-Level Packaging
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (9) , 8445-8460
A D-Band 2-D Phased-Array Transceiver Module With Aperiodic Subarray Configuration in Fan-Out Wafer-Level Packaging
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (6) , 5631-5643
An E-Band Radar Transceiver With Daisy-Chained Wireless Chirp Synchronization for Scalable Multistatic Radar Networks
Recent demonstrations have highlighted that drone swarm Synthetic Aperture Radar (SAR) systems can efficiently cover wide areas while providing enhanced angular diversity for improved ground target information. While frequency-modulated continuous-wave (FMCW) radar systems support both monostatic and multistatic modes, drone-borne radar is typically limited to a monostatic configuration due to significant synchronization challenges. Effective synchronization between transmitters (TXs) and receivers (RXs) is, therefore, essential for multistatic imaging. This work presents a multistatic FMCW radar transceiver (TRX) that uses separate E- and Ka-bands for radar and wireless synchronization, with integrated RF switches enabling conversion between its monostatic and multistatic modes. In multistatic modes, the synchronization chirp signal can be transmitted from the leader to multiple follower modules or relayed by being retransmitted from one follower to another in a daisy-chain configuration. The radar TRX is fabricated in a 28-nm CMOS process, with the chip occupying a total area of 2.88 mm2. The complete module measures $13\times 10.6$ cm and integrates microstrip comb-line antennas for radar with planar Yagi-Uda arrays for synchronization. It achieves a measured EIRP of over 14dBm. Finally, multistatic measurements demonstrated successful target detection up to 35 m, with multistatic tests confirming reliable operation for modules spaced as far as 10 m apart in a daisy-chain configuration.
- 13 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 74 (6) , 5631-5643
An E-Band Radar Transceiver With Daisy-Chained Wireless Chirp Synchronization for Scalable Multistatic Radar Networks
Recent demonstrations have highlighted that drone swarm Synthetic Aperture Radar (SAR) systems can efficiently cover wide areas while providing enhanced angular diversity for improved ground target information. While frequency-modulated continuous-wave (FMCW) radar systems support both monostatic and multistatic modes, drone-borne radar is typically limited to a monostatic configuration due to significant synchronization challenges. Effective synchronization between transmitters (TXs) and receivers (RXs) is, therefore, essential for multistatic imaging. This work presents a multistatic FMCW radar transceiver (TRX) that uses separate E- and Ka-bands for radar and wireless synchronization, with integrated RF switches enabling conversion between its monostatic and multistatic modes. In multistatic modes, the synchronization chirp signal can be transmitted from the leader to multiple follower modules or relayed by being retransmitted from one follower to another in a daisy-chain configuration. The radar TRX is fabricated in a 28-nm CMOS process, with the chip occupying a total area of 2.88 mm2. The complete module measures $13\times 10.6$ cm and integrates microstrip comb-line antennas for radar with planar Yagi-Uda arrays for synchronization. It achieves a measured EIRP of over 14dBm. Finally, multistatic measurements demonstrated successful target detection up to 35 m, with multistatic tests confirming reliable operation for modules spaced as far as 10 m apart in a daisy-chain configuration.
- 27 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (5) , 1866-1876
A Broadband D-Band Dual-Peak Gmax-Core Amplifier With a T-Shaped Embedding Network in CMOS
We present a novel high-gain broadband $G_{\mathrm{max}}$ -core amplifier with a T-shaped passive embedding network consisting of two series capacitors and one shunt inductor. The proposed $G_{\mathrm{max}}$ -core has dual-peak properties. By staggering dual-peak $G_{\mathrm{max}}$ -cores, a broad gain–bandwidth amplifier can be achieved with a small number of stages. In addition, the three elements of the T-shaped network give us a high degree of freedom in design. One can design not only the gain profile of the core but also the input and output impedance as desired with the embedding network. In this article, the proposed $G_{\mathrm{max}}$ -core is theoretically analyzed. A three-stage D-band dual-peak $G_{\mathrm{max}}$ -core amplifier is implemented in a 28-nm FDSOI CMOS process to demonstrate the idea. The fabricated amplifier offers a peak small-signal gain and bandwidth of 14.5 dB and 26 GHz (117–143 GHz), respectively, with the power consumption of 21.6 mW. This work shows a reasonable gain–bandwidth product per power dissipation among state-of-the-art amplifiers operating at similar frequencies.
- 27 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (5) , 1866-1876
A Broadband D-Band Dual-Peak Gmax-Core Amplifier With a T-Shaped Embedding Network in CMOS
We present a novel high-gain broadband $G_{\mathrm{max}}$ -core amplifier with a T-shaped passive embedding network consisting of two series capacitors and one shunt inductor. The proposed $G_{\mathrm{max}}$ -core has dual-peak properties. By staggering dual-peak $G_{\mathrm{max}}$ -cores, a broad gain–bandwidth amplifier can be achieved with a small number of stages. In addition, the three elements of the T-shaped network give us a high degree of freedom in design. One can design not only the gain profile of the core but also the input and output impedance as desired with the embedding network. In this article, the proposed $G_{\mathrm{max}}$ -core is theoretically analyzed. A three-stage D-band dual-peak $G_{\mathrm{max}}$ -core amplifier is implemented in a 28-nm FDSOI CMOS process to demonstrate the idea. The fabricated amplifier offers a peak small-signal gain and bandwidth of 14.5 dB and 26 GHz (117–143 GHz), respectively, with the power consumption of 21.6 mW. This work shows a reasonable gain–bandwidth product per power dissipation among state-of-the-art amplifiers operating at similar frequencies.
- 4 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (5) , 1877-1889
Analysis and Design of Multi-Stacked FET Power Amplifier With Phase-Compensation Inductors in Millimeter-Wave Band
Stacked-FET topology is analyzed to increase the output power of a power amplifier (PA) in the millimeter-wave (mm-wave) band. In the mm-wave band, parasitic capacitances of the transistor severely degrade stacking efficiency due to the phase mismatch between stacked FETs. The phase-compensation (PC) inductances, including the losses of the inductor for the best stacking efficiency, are presented in both series and shunt connections. From this analysis, a triple-stacked-FET PA is designed in the $F$ -band. Proper PC series or shunt inductor types are used between the first and second stacked FETs and between the second and third stacked FETs in consideration of the core layout and inductor size. The PA is fabricated in the 28-nm CMOS fully depleted silicon-on-insulator (FD-SOI) process. With a compact core area of 0.054 mm $^{2}$ , the PA achieves peak $P_{\mathrm{SAT}}$ and PAE $_{\mathrm{MAX}}$ of 15.1 dBm and 18.6%, respectively.
- 4 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (5) , 1877-1889
Analysis and Design of Multi-Stacked FET Power Amplifier With Phase-Compensation Inductors in Millimeter-Wave Band
Stacked-FET topology is analyzed to increase the output power of a power amplifier (PA) in the millimeter-wave (mm-wave) band. In the mm-wave band, parasitic capacitances of the transistor severely degrade stacking efficiency due to the phase mismatch between stacked FETs. The phase-compensation (PC) inductances, including the losses of the inductor for the best stacking efficiency, are presented in both series and shunt connections. From this analysis, a triple-stacked-FET PA is designed in the $F$ -band. Proper PC series or shunt inductor types are used between the first and second stacked FETs and between the second and third stacked FETs in consideration of the core layout and inductor size. The PA is fabricated in the 28-nm CMOS fully depleted silicon-on-insulator (FD-SOI) process. With a compact core area of 0.054 mm $^{2}$ , the PA achieves peak $P_{\mathrm{SAT}}$ and PAE $_{\mathrm{MAX}}$ of 15.1 dBm and 18.6%, respectively.