MSMax G. Schußmann

Max G. Schußmann

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Max G. Schußmann has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Revisiting the Intrinsic Nonlinearity Dilution in Model Polystyrene Combs under Medium-Amplitude Oscillatory Shear

    by Hyeong Yong Song, Max G. Schußmann, Manfred Wilhelm, Kyu Hyun

    The effect of dynamic tube dilution (DTD) on medium-amplitude oscillatory shear (MAOS) responses was examined for model polystyrene combs with unentangled and entangled branches. First-harmonic MAOS plateau moduli followed the same dilution scaling as linear viscoelasticity with dilution exponent α = 1, whereas third-harmonic nonlinearity Q0 was more strongly diluted than expected from static dilution. In multimode molecular stress function analysis, the first-harmonic response was well described with stretch parameter β = 1 regardless of topology, whereas larger effective β values improved the third-harmonic predictions for combs. These results indicate an additional topology-sensitive third-harmonic contribution beyond DTD alone.

  • Open Access

    Self Dilution of Model Polystyrene Pom‐Poms and Combs by Unentangled Side Arms

    by Max G. Schußmann, Valerian Hirschberg, Manfred Wilhelm, Manfred H. Wagner

    We present linear‐viscoelastic characterization and elongational viscosity start‐up data of 4 model polystyrene pom‐poms and 2 model polystyrene combs. All 6 model systems have a self‐entangled backbone, but unentangled side arms. Pom‐poms consist of a linear backbone with one branching point with q arms at each end of the backbone. Analysis by the Enhanced Relaxation of Stretch (ERS) model shows that the elongational rheology of all model polymers is equivalent to that of polymer melts consisting of long linear chains diluted by short, unentangled linear polymer chains of the same chemistry. Strain hardening increases with increasing intrinsic dilution of the backbone by the arms. The comparison of the elongational viscosity data of pom‐poms versus that of the combs with several branching points along the backbone chain suggests that the location of the unentangled side arms does not result in significant differences. At higher elongation rates, brittle filament fracture is observed, which is well described by the fracture criterion for linear melts and polymer solutions, thus confirming the self‐dilution of the backbone chains of pom‐poms and combs by unentangled side arms.


  • Open Access

    The linear-viscoelastic relaxation time spectrum tells it all for branched polymers: Modeling of nonlinear shear and elongational rheology of polystyrene pom-poms

    by Max G. Schußmann, Valerian Hirschberg, Manfred Wilhelm, Manfred H. Wagner

    We analyze the nonlinear shear and elongational rheology of six nearly monodisperse polystyrene pom-pom systems with different molecular weights of backbone and different numbers and molecular weights of side arms. Startup viscosity and apparent normal stress growth in shear flow as well as startup viscosity in elongational flow of pom-poms with strongly entangled side arms can be described consistently by the Hierarchical Multi-mode Molecular Stress Function (HMMSF) model. The modeling is based on the linear-viscoelastic characterization of the pom-poms in shear flow and accounts for dilution of the shorter relaxation modes by hierarchical relaxation of the longer modes. Dynamic dilution is characterized by a specific dilution modulus. For pom-poms with more than five entangled side arms, the dilution modulus is equal to the plateau modulus, and therefore the modeling of the nonlinear shear and elongational rheology of the pom-poms does not require any fitting parameter. We also show that pom-poms with weakly entangled or unentangled side arms can be considered as quasi-linear polymers with the slowly relaxing backbone chains being permanently diluted by the fast relaxing side arms. Pom-poms with entangled vs unentangled backbones show remarkably different features of steady shear and elongational viscosities resulting from different interplay of orientation and stretch of backbone chains.


  • Open Access

    Nonlinear Influence of Blending Star and Triblock Copolymers on Morphological and Mechanical Properties of Thermoplastic Elastomers

    by Max G. Schußmann, Leonardo Rocha Dias, Simon Buchheiser, Hermann Nirschl, Jonathan Berson, Manfred Wilhelm, Valerian Hirschberg

    To tune the mechanical properties of thermoplastic elastomers, a linear Poly(styrene (S)‐ b ‐isoprene (I)‐ b ‐styrene (S)) triblock copolymer (SIS) is blended with well‐defined symmetric star‐shaped PS‐PI block copolymers with 8 and 15 arms, respectively. The model systems are synthesized via anionic polymerization and grafting‐onto techniques and have a lamellar morphology with the long‐range order L 0 for the SIS larger than the stars. Morphological analysis using small angle X‐ray scattering (SAXS) and atom force microscopy (AFM) reveals a nonlinear dependency of L 0 as a function of the star content, ϕ star . For small star contents, L 0 of the blends increases above L 0 of the individual compounds. The stars show significantly higher mechanical performance than the SIS, by an increased elongation at break, ε b , by +15% and +38%, and an increased ultimate tensile strength, σ UTS , by about a factor of 2. For the blends, the mechanical properties highly depend on the star content, and can be fully uncoupled from the ones of the SIS and the star: at small star contents ε b is significantly improved beyond ε b,star , but σ UTS decreases below σ UTS,SIS . For higher star contents, σ UTS strongly increases toward σ UTS,star , whereas ε b shows a minimum around ϕ star = 50 wt.%, before increasing to ε b,star .

  • Double stress overshoot in startup shear flow and failure of Cox–Merz rule of pom-pom polymers

    by Max G. Schußmann, Hyeong Yong Song, Kyu Hyun, Manfred Wilhelm, Valerian Hirschberg

    The understanding of long chain branched homopolymer melts in shear flow is of significant interest to polymer science and critical to ensure stable processing. We report on the startup shear flow at a constant shear rate of well-defined pom-pom shaped polymer melts. Pom-poms consist of two stars covalently connected by a single backbone. For low-arm numbers and short arms, a single stress overshoot followed by a steady state is observed, similar to linear and star shaped melts. For one highly branched pom-pom with entangled branches, a double stress overshoot during the startup shear flow could be observed before reaching the steady state viscosity. Additionally, we find that the Cox–Merz rule, which relates the complex viscosity η*ω to the steady state shear viscosity ηγ̇, fails at high-shear rates, if the backbone is not self-entangled.


  • Open Access

    Predicting maximum strain hardening factor in elongational flow of branched pom-pom polymers from polymer architecture

    by Max G. Schußmann, Manfred Wilhelm, Valerian Hirschberg

    We present a model-driven predictive scheme for the uniaxial extensional viscosity and strain hardening of branched polymer melts, specifically for the pom-pom architecture, using the small amplitude oscillatory shear mastercurve and the polymer architecture. A pom-pom shaped polymer is the simplest architecture with at least two branching points, needed to induce strain hardening. It consists of two stars, each with $$q$$ q arms of the molecular weight $${M}_{w,a}$$ M w , a , connected by a backbone of $${M}_{w,b}$$ M w , b . Despite the pom-pom constitutive model, experimental data of systematic investigations lack due to synthetic complexity. With an optimized approach, we synthesized polystyrene pom-pom model systems with systematically varied $${M}_{w,a}$$ M w , a and $${M}_{w,b}$$ M w , b . Experimentally, we identify four characteristic strain rate dependent regimes of the extensional viscosity, which can be predicted from the rheological mastercurve. Furthermore, we find that the industrially important maximum strain hardening factor depends only on the arm number by $$[{q}^{2}/{{{{{\mathrm{ln}}}}}}({\sqrt{3}}q)]$$ [ q 2 / ln ( 3 q ) ] . This framework offers a model-based design of branched polymers with predictable melt flow behavior.


  • Open Access

    Fast and Scalable Synthetic Route to Densely Grafted, Branched Polystyrenes and Polydienes via Anionic Polymerization Utilizing P2VP as Branching Point

    by Max G. Schußmann, Lukas Kreutzer, Valerian Hirschberg

    Defined, branched polymer architectures with low dispersity and architectural purity are of great interest to polymer science but are challenging to synthesize. Besides star and comb, especially the pom‐pom topology is of interest as it is the simplest topology with exactly two branching points. Most synthetic approaches to a pom‐pom topology reported a lack of full control and variability over one of the three topological parameters, the backbone or arm molecular weight and arm number. A new, elegant, fast, and scalable synthetic route without the need for post‐polymerization modification (PPM) or purification steps during the synthesis to a pom‐pom and a broad variety of topologies made from styrene and dienes is reported, with potential application to barbwire, bottlebrush, miktoarm star, Janus type polymers, or multi‐graft copolymers. The key is to inset short poly(2‐vinyl‐pyridine) blocks (<2 mol% in the branched product) into the backbone as branching points. Carb anions can react at the C6 carbon of the pyridine ring, grafting the arms onto the backbone. Since the synthetic route to polystyrene pom‐poms has only two steps and is free of PPM or purification, large amounts of up to 300 g of defined pom‐pom structures can be synthesized in one batch.


  • Open Access

    Complex polymer topologies in blends: Shear and elongational rheology of linear/pom-pom polystyrene blends

    by V. Hirschberg, S. Lyu, M. G. Schußmann

    The shear and elongational rheology of linear and pom-pom shaped polystyrene (PS) blends was investigated experimentally and modeled using constitutive models such as the Doi–Edwards and the molecular stress function (MSF) model. The pom-pom molecule is the simplest topology to combine shear thinning with strain hardening in elongational flow. A PS pom-pom with a self-entangled backbone (Mw,bb = 280 kg mol−1) and 22 entangled sidearms (Mw,a = 22 kg mol−1) at each star was blended with two linear PS with weight average molecular weights of Mw = 43 and 90 kg mol−1 and low polydispersities (Ð < 1.05). A semilogarithmic relationship between the weight content of the pom-pom, ϕpom-pom, and the zero-shear viscosity was found. Whereas the pure pom-pom has in uniaxial elongational flow at T = 160 °C strain hardening factors (SHFs) of SHF ≈100, similar values can be found in blends with up to ϕpom-pom = 50 wt. % in linear PS43k and PS90k. By blending only 2 wt. % pom-pom with linear PS43k, SHF = 10 can still be observed. Furthermore, above ϕpom-pom = 5–10 wt. %, the uniaxial extensional behavior can be well-described with the MSF model with a single parameter set for each linear PS matrix. The results show that the relationship between shear and elongational melt behavior, i.e., zero-shear viscosity and SHF, can be uncoupled and customized tuned by blending linear and pom-pom shaped polymers and very straightforwardly predicted theoretically. This underlines also the possible application of well-designed branched polymers as additives in recycling.


  • Open Access

    Shear and elongational rheology of model polystyrene pom-poms

    by Valerian Hirschberg, Max G. Schußmann, Marie-Christin Röpert

    Understanding the effect of branching on the melt rheological properties in shear and elongational flow is of fundamental interest to polymer science. Besides t