Peng Hu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peng Hu has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Kun Wang
School of transportation and civil engineering, Shandong Jiaotong University, Jinan 250357, China
9 shared publications - Lu Qu
Civil Engineering Department, Shandong Jiaotong University, Jinan 250300, China
3 shared publications - Fuying Dong
School of transportation and civil engineering, Shandong Jiaotong University, Jinan 250357, China
2 shared publications - Haichuan Jia
School of Civil Engineering, Shandong Jiaotong University, Jinan 250357, China
2 shared publications - Hao Xu
Civil Engineering Department, Shandong Jiaotong University, Jinan 250300, China
2 shared publications - Liran Fan
Civil Engineering Department, Shandong Jiaotong University, Jinan 250300, China
2 shared publications
Latest Publications
- 27 August 2026
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 27 (1)
Preparation and rheological properties of bio-based toughened epoxy asphalt
1. With increasing traffic loads and worsening environmental conditions, conventional bridge deck paving layers have become increasingly susceptible to failures such as rutting, cracking and interl...
- 27 August 2026
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 27 (1)
Preparation and rheological properties of bio-based toughened epoxy asphalt
1. With increasing traffic loads and worsening environmental conditions, conventional bridge deck paving layers have become increasingly susceptible to failures such as rutting, cracking and interl...
- 24 August 2026
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 27 (1)
Acquisition of binary images and calculation of texture parameters for asphalt pavements based on the HTC-net model
1 To enhance road traffic safety, countries worldwide invest significant resources, finances and time in evaluating road safety performance, aiming to provide timely and reasonable assessments and ...
- 24 August 2026
- Published by Taylor & Francis in International Journal of Pavement Engineering
- Vol. 27 (1)
Acquisition of binary images and calculation of texture parameters for asphalt pavements based on the HTC-net model
1 To enhance road traffic safety, countries worldwide invest significant resources, finances and time in evaluating road safety performance, aiming to provide timely and reasonable assessments and ...
- 29 April 2026
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 24 (6-7) , 841-856
Settlement Analysis of Multi-Purpose Utility Tunnels (MUTs) Under High Water Level Silt Foundation Conditions
- 29 April 2026
- Published by Springer Nature in International Journal of Civil Engineering
- Vol. 24 (6-7) , 841-856
Settlement Analysis of Multi-Purpose Utility Tunnels (MUTs) Under High Water Level Silt Foundation Conditions
- Open Access
Effect of Hybrid Fiber on the Chloride Salt Erosion Resistance of Shotcrete
The use of shotcrete is a critical support technique in ocean engineering structures. However, it often exhibits low chloride and salt erosion resistance under ocean environmental conditions and poor long-term durability. This study employed polypropylene fiber (PF) and basalt fiber (BF) to optimize the shotcrete mix design. Laboratory immersion and salt spray tests simulated chloride ion corrosion environments in the ocean’s underwater and atmospheric zones. The effects of different corrosion mechanisms and varying fiber volume fractions on shotcrete strength and durability were then analyzed. The results indicate that shotcrete demonstrates strong resistance to chloride-induced corrosion in both ocean underwater and atmospheric zones when the volume fractions of PF and BF are 0.2% and 0.1%, respectively. Based on test results from 3D digital microscopy (3D-DM), X-ray diffraction (XRD), and scanning electron microscopy (SEM), the chloride-induced degradation mechanism of hybrid fiber-reinforced shotcrete was analyzed from both mesoscopic and microscopic perspectives. This study offers theoretical support for applying hybrid fiber-reinforced shotcrete in ocean engineering environments.
Open AccessEffect of Hybrid Fiber on the Chloride Salt Erosion Resistance of Shotcrete
The use of shotcrete is a critical support technique in ocean engineering structures. However, it often exhibits low chloride and salt erosion resistance under ocean environmental conditions and poor long-term durability. This study employed polypropylene fiber (PF) and basalt fiber (BF) to optimize the shotcrete mix design. Laboratory immersion and salt spray tests simulated chloride ion corrosion environments in the ocean’s underwater and atmospheric zones. The effects of different corrosion mechanisms and varying fiber volume fractions on shotcrete strength and durability were then analyzed. The results indicate that shotcrete demonstrates strong resistance to chloride-induced corrosion in both ocean underwater and atmospheric zones when the volume fractions of PF and BF are 0.2% and 0.1%, respectively. Based on test results from 3D digital microscopy (3D-DM), X-ray diffraction (XRD), and scanning electron microscopy (SEM), the chloride-induced degradation mechanism of hybrid fiber-reinforced shotcrete was analyzed from both mesoscopic and microscopic perspectives. This study offers theoretical support for applying hybrid fiber-reinforced shotcrete in ocean engineering environments.
- Open Access
A State of the Art Review on the Use of Natural Fibers in Asphalt Mixtures
Natural fibers have attracted increasing attention as eco-friendly and sustainable additives for improving the durability and mechanical performance of asphalt mixes. This paper presents a critical state-of-the-art review of the use of six kinds of natural fibers in asphalt mixes. This paper reviews the impact of six natural fibers such as lignin fiber, bamboo fiber, bagasse fiber, corn stalk fiber, basalt fiber, and wool fiber on the properties of bitumen binders and mixes. It examines the influence of these fibers on the physical properties, rheological properties, and fatigue performance of bitumen binders. In addition, the influence of fibers on the moisture stability, anti-cracking, and high- and low-temperature performance of asphalt concrete was analyzed. The review demonstrated that the recommended lengths of natural fibers in asphalt mixes are as follows: lignin fiber 0.8–1.2 mm, bamboo fiber 4–20 mm, sugarcane bagasse fiber 5–12 mm, corn stalk fiber 3 mm, and basalt fiber 6–30 mm. Adding lignin fiber and corn stalk fiber enhanced the high-temperature characteristic of bitumen. The high- and low-temperature properties of the binder were improved by adding bamboo fiber. The addition of basalt fiber and bamboo fiber can increase rutting resistance and fatigue life. Additionally, incorporating the bamboo fiber, bagasse fiber, basalt fiber and wool fiber improved the low-temperature cracking and fatigue resistance of the bitumen mixture. The high-temperature properties of the bitumen mixes were enhanced by using basalt fibers, lignin fibers, bamboo fibers and bagasse fibers. The moisture resistance of bitumen mixes were reinforced by the incorporation of basalt fibers, lignin fibers and bamboo fibers. In general, incorporating natural fibers provided a technical method for improving the performance of asphalt concrete in road applications.
Open AccessA State of the Art Review on the Use of Natural Fibers in Asphalt Mixtures
Natural fibers have attracted increasing attention as eco-friendly and sustainable additives for improving the durability and mechanical performance of asphalt mixes. This paper presents a critical state-of-the-art review of the use of six kinds of natural fibers in asphalt mixes. This paper reviews the impact of six natural fibers such as lignin fiber, bamboo fiber, bagasse fiber, corn stalk fiber, basalt fiber, and wool fiber on the properties of bitumen binders and mixes. It examines the influence of these fibers on the physical properties, rheological properties, and fatigue performance of bitumen binders. In addition, the influence of fibers on the moisture stability, anti-cracking, and high- and low-temperature performance of asphalt concrete was analyzed. The review demonstrated that the recommended lengths of natural fibers in asphalt mixes are as follows: lignin fiber 0.8–1.2 mm, bamboo fiber 4–20 mm, sugarcane bagasse fiber 5–12 mm, corn stalk fiber 3 mm, and basalt fiber 6–30 mm. Adding lignin fiber and corn stalk fiber enhanced the high-temperature characteristic of bitumen. The high- and low-temperature properties of the binder were improved by adding bamboo fiber. The addition of basalt fiber and bamboo fiber can increase rutting resistance and fatigue life. Additionally, incorporating the bamboo fiber, bagasse fiber, basalt fiber and wool fiber improved the low-temperature cracking and fatigue resistance of the bitumen mixture. The high-temperature properties of the bitumen mixes were enhanced by using basalt fibers, lignin fibers, bamboo fibers and bagasse fibers. The moisture resistance of bitumen mixes were reinforced by the incorporation of basalt fibers, lignin fibers and bamboo fibers. In general, incorporating natural fibers provided a technical method for improving the performance of asphalt concrete in road applications.
- 22 June 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (13) , 8407-8425
Synthesis and characterization of vinyltriethoxysilane-modified polycarboxylate superplasticizer for enhanced sulfate resistance
- 22 June 2025
- Published by Springer Nature in Polymer Bulletin
- Vol. 82 (13) , 8407-8425
Synthesis and characterization of vinyltriethoxysilane-modified polycarboxylate superplasticizer for enhanced sulfate resistance
- Open Access
The Effect of Waste Low-Density Polyethylene/Plasticizer Diisononyl Phthalate on the Performance of Asphalt Binder
As an aspect of green road construction, the use of waste plastic agricultural film in asphalt pavement not only mitigates environmental pollution but also enhances the mechanical properties of asphalt. However, it has been plagued by problems such as poor low-temperature crack resistance and poor compatibility. To address this problem, this study used waste low-density polyethylene (LDPE), sourced from waste film, and the plasticizer diisononyl phthalate (DINP) to enhance the properties of asphalt. Based on orthogonal tests, rheological property tests, conventional property tests, storage stability tests, fluorescence microscopy (FM), and Fourier transform infrared (FTIR) tests, waste LDPE/plasticizer DINP-modified asphalt samples were evaluated. Orthogonal tests indicated that a modified asphalt optimum preparation process of 30 min and 4500 rpm at 180 °C was beneficial. Conventional and rheological property tests revealed that 4% waste LDPE modified with 2.5% plasticizer DINP represents the optimal combination to effectively enhance the low-temperature rheological properties of asphalt while exerting minimal impact on its high-temperature characteristics. Storage stability and FM analysis indicated that waste LDPE is evenly dispersed in the modified asphalt binder when 3% plasticizer DINP is added. FTIR analysis revealed no change in the absorption peaks after waste LDPE and plasticizer DINP were added to asphalt, indicating that no chemical reactions occurred. Overall, waste LDPE/plasticizer DINP-modified asphalt exhibits excellent rheological properties and storage stability, which are conducive to green road construction and resource utilization.
Open AccessThe Effect of Waste Low-Density Polyethylene/Plasticizer Diisononyl Phthalate on the Performance of Asphalt Binder
As an aspect of green road construction, the use of waste plastic agricultural film in asphalt pavement not only mitigates environmental pollution but also enhances the mechanical properties of asphalt. However, it has been plagued by problems such as poor low-temperature crack resistance and poor compatibility. To address this problem, this study used waste low-density polyethylene (LDPE), sourced from waste film, and the plasticizer diisononyl phthalate (DINP) to enhance the properties of asphalt. Based on orthogonal tests, rheological property tests, conventional property tests, storage stability tests, fluorescence microscopy (FM), and Fourier transform infrared (FTIR) tests, waste LDPE/plasticizer DINP-modified asphalt samples were evaluated. Orthogonal tests indicated that a modified asphalt optimum preparation process of 30 min and 4500 rpm at 180 °C was beneficial. Conventional and rheological property tests revealed that 4% waste LDPE modified with 2.5% plasticizer DINP represents the optimal combination to effectively enhance the low-temperature rheological properties of asphalt while exerting minimal impact on its high-temperature characteristics. Storage stability and FM analysis indicated that waste LDPE is evenly dispersed in the modified asphalt binder when 3% plasticizer DINP is added. FTIR analysis revealed no change in the absorption peaks after waste LDPE and plasticizer DINP were added to asphalt, indicating that no chemical reactions occurred. Overall, waste LDPE/plasticizer DINP-modified asphalt exhibits excellent rheological properties and storage stability, which are conducive to green road construction and resource utilization.
- Open Access
Investigation on the Performance of Modified Corn Stalk Fiber AC-13 Asphalt Mixture
As an agricultural waste, a large amount of corn stalk will cause environmental pollution. In order to realize the resource utilization of waste and meet the strict requirements of modern traffic on pavement strength and durability, it was modified and applied to an AC-13 asphalt mixture to study its influence on the road performance of asphalt mixture and its mechanism. The road performances of modified corn stalk fiber, lignin fiber, and ordinary asphalt mixtures were evaluated via the wheel tracking test, low-temperature bending test, water immersion Marshall test, freeze–thaw splitting test, and fatigue test. Based on the results of three-point bending fatigue test, the viscoelastic parameters and indexes of the fiber asphalt mixture were obtained by fitting the loading specimen and deflection data with the Burgers constitutive model, and the creep strain response was analyzed by applying dynamic load, so as to explore the relationship between the viscoelastic characteristics and creep behavior of modified corn stalk fiber and AC-13 mixture. The long-term high-temperature performance test of the asphalt mixture with the best fiber content was carried out by using the long-term pavement intelligent monitoring equipment independently developed by the group of investigators. According to the findings, the ideal fiber contents for modified corn and lignin in asphalt mixture are 0.2% and 0.3%, respectively. Among them, the modified corn stalk fiber with a 0.2% content has the best effect on road performance, viscoelastic performance, and the asphalt mixture’s creep behavior under dynamic load. Compared with the 0.3% lignin fiber asphalt mixture, its dynamic stability, bending stiffness modulus, immersion residual stability, freeze–thaw splitting strength ratio, and loading times at failure increased by 19.9%, 18.28%, 4.19%, 8.6%, and 9.15%, respectively. Compared with ordinary asphalt mixture, it increased by 47.0%, 28.72%, 7.65%, 15%, and 75.81%, respectively. Moreover, when modified corn stalk fiber is added at 0.2%, the viscoelastic delay time of asphalt mixture is the longest, the strain peak value and rut depth are at a minimum, and the viscoelastic properties, creep properties, and long-term high-temperature properties are the best.
Open AccessInvestigation on the Performance of Modified Corn Stalk Fiber AC-13 Asphalt Mixture
As an agricultural waste, a large amount of corn stalk will cause environmental pollution. In order to realize the resource utilization of waste and meet the strict requirements of modern traffic on pavement strength and durability, it was modified and applied to an AC-13 asphalt mixture to study its influence on the road performance of asphalt mixture and its mechanism. The road performances of modified corn stalk fiber, lignin fiber, and ordinary asphalt mixtures were evaluated via the wheel tracking test, low-temperature bending test, water immersion Marshall test, freeze–thaw splitting test, and fatigue test. Based on the results of three-point bending fatigue test, the viscoelastic parameters and indexes of the fiber asphalt mixture were obtained by fitting the loading specimen and deflection data with the Burgers constitutive model, and the creep strain response was analyzed by applying dynamic load, so as to explore the relationship between the viscoelastic characteristics and creep behavior of modified corn stalk fiber and AC-13 mixture. The long-term high-temperature performance test of the asphalt mixture with the best fiber content was carried out by using the long-term pavement intelligent monitoring equipment independently developed by the group of investigators. According to the findings, the ideal fiber contents for modified corn and lignin in asphalt mixture are 0.2% and 0.3%, respectively. Among them, the modified corn stalk fiber with a 0.2% content has the best effect on road performance, viscoelastic performance, and the asphalt mixture’s creep behavior under dynamic load. Compared with the 0.3% lignin fiber asphalt mixture, its dynamic stability, bending stiffness modulus, immersion residual stability, freeze–thaw splitting strength ratio, and loading times at failure increased by 19.9%, 18.28%, 4.19%, 8.6%, and 9.15%, respectively. Compared with ordinary asphalt mixture, it increased by 47.0%, 28.72%, 7.65%, 15%, and 75.81%, respectively. Moreover, when modified corn stalk fiber is added at 0.2%, the viscoelastic delay time of asphalt mixture is the longest, the strain peak value and rut depth are at a minimum, and the viscoelastic properties, creep properties, and long-term high-temperature properties are the best.
- Open Access
- 15 February 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (4) , 1608
Structural Response of a Cement Concrete Pavement with a Buffer Layer to Temperature and Moving-Load Effects
The main issues associated with cement concrete pavements are cracks and broken plates that affect driving comfort and road service life. To ensure sustainable use of the cement concrete, a buffer layer (AC-10) can be introduced between the base and the cement concrete panel. In this study, the interlayer shear test was performed, and the interlayer bonding coefficient under different temperature conditions was determined. The creep test of the buffer layer was also conducted, and the four parameters (E1, E2, η1, and η2) of the Burgers model of the buffer layer were analyzed using regression. According to the parameters obtained from the test, the finite-element model was established, and the moving load was applied to analyze the structural model response under high-, medium-, and low-temperature conditions. The results show that the (1) temperature stress is mainly concentrated in the buffer layer and regions above the structural layer. At low temperatures, the maximum stress at the top of the surface layer is 2.16 MPa, and the vertical strain decreases as a function of depth. (2) Under the combined action of temperature and moving load, the variation ranges of tensile and compressive stresses at the top of the surface layer are the largest; the variation range of the buffer layer and the subsequent structure is small; the maximum warpage deformation of the surface layer is 0.453 mm under high-temperature conditions; and the maximum compression deformation is 0.219 mm under low-temperature conditions. (3) The comprehensive coefficient of the fatigue equation was modified, and the comprehensive coefficient of the fatigue equation under different vehicle speeds was proposed. This study provides a reference for the sustainable development of cement concrete pavements with buffer layers.- 15 February 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (4) , 1608
Open AccessStructural Response of a Cement Concrete Pavement with a Buffer Layer to Temperature and Moving-Load Effects
The main issues associated with cement concrete pavements are cracks and broken plates that affect driving comfort and road service life. To ensure sustainable use of the cement concrete, a buffer layer (AC-10) can be introduced between the base and the cement concrete panel. In this study, the interlayer shear test was performed, and the interlayer bonding coefficient under different temperature conditions was determined. The creep test of the buffer layer was also conducted, and the four parameters (E1, E2, η1, and η2) of the Burgers model of the buffer layer were analyzed using regression. According to the parameters obtained from the test, the finite-element model was established, and the moving load was applied to analyze the structural model response under high-, medium-, and low-temperature conditions. The results show that the (1) temperature stress is mainly concentrated in the buffer layer and regions above the structural layer. At low temperatures, the maximum stress at the top of the surface layer is 2.16 MPa, and the vertical strain decreases as a function of depth. (2) Under the combined action of temperature and moving load, the variation ranges of tensile and compressive stresses at the top of the surface layer are the largest; the variation range of the buffer layer and the subsequent structure is small; the maximum warpage deformation of the surface layer is 0.453 mm under high-temperature conditions; and the maximum compression deformation is 0.219 mm under low-temperature conditions. (3) The comprehensive coefficient of the fatigue equation was modified, and the comprehensive coefficient of the fatigue equation under different vehicle speeds was proposed. This study provides a reference for the sustainable development of cement concrete pavements with buffer layers. - Open Access
- 1 January 2024
- Published by Jordan University of Science and Technology in Jordan Journal of Civil Engineering
- Vol. 18 (4) , 648-661
Factors Influencing the Rheological Characteristics of Modified Corn Stalk Fiber Asphalt Mortar
As the demand for sustainable and environmentally friendly road construction materials increases, corn stalk fiber modified with NaOH is a promising candidate due to its renewable and eco-friendly nature. This study employs an orthogonal experimental design to optimize the investigation of multiple factors (corn stalk fiber length, content, and modifier concentration) in the experiments, ensuring that the effects of different factors on the high and low temperature performance of asphalt binder can be independently estimated. Dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests were conducted. The bonding between fiber and asphalt was analyzed by infrared spectroscopy, and the action mechanism of fiber in asphalt was revealed from a microscopic perspective by scanning electron microscopy and fluorescence microscopy. Evidently, the concentration of modifier is the main factor affecting the rheological properties of fiber asphalt mortar. Considering the influence of various factors on the rheological properties of modified corn stalk fiber asphalt mortar, the optimal modifier concentration is 7%, the fiber length is 6mm, and the content is 1.5%. After adding modified corn stalk fiber, the asphalt mortar did not produce new characteristic peaks, and the fiber and asphalt were mainly bonded by physical action. The large surface roughness of the modified corn stalk fiber determines its good adsorption capacity, which is conducive to increasing the bonding force of the asphalt. Fibers with a large aspect ratio are easy to bridge with each other, restraining the expansion of cracks and thus enhancing the crack resistance of the mortar. Keywords: Road engineering, Corn stalk fiber, Asphalt mortar, Orthogonal test, Rheological properties.
- 1 January 2024
- Published by Jordan University of Science and Technology in Jordan Journal of Civil Engineering
- Vol. 18 (4) , 648-661
Open AccessFactors Influencing the Rheological Characteristics of Modified Corn Stalk Fiber Asphalt Mortar
As the demand for sustainable and environmentally friendly road construction materials increases, corn stalk fiber modified with NaOH is a promising candidate due to its renewable and eco-friendly nature. This study employs an orthogonal experimental design to optimize the investigation of multiple factors (corn stalk fiber length, content, and modifier concentration) in the experiments, ensuring that the effects of different factors on the high and low temperature performance of asphalt binder can be independently estimated. Dynamic shear rheometer (DSR) and bending beam rheometer (BBR) tests were conducted. The bonding between fiber and asphalt was analyzed by infrared spectroscopy, and the action mechanism of fiber in asphalt was revealed from a microscopic perspective by scanning electron microscopy and fluorescence microscopy. Evidently, the concentration of modifier is the main factor affecting the rheological properties of fiber asphalt mortar. Considering the influence of various factors on the rheological properties of modified corn stalk fiber asphalt mortar, the optimal modifier concentration is 7%, the fiber length is 6mm, and the content is 1.5%. After adding modified corn stalk fiber, the asphalt mortar did not produce new characteristic peaks, and the fiber and asphalt were mainly bonded by physical action. The large surface roughness of the modified corn stalk fiber determines its good adsorption capacity, which is conducive to increasing the bonding force of the asphalt. Fibers with a large aspect ratio are easy to bridge with each other, restraining the expansion of cracks and thus enhancing the crack resistance of the mortar. Keywords: Road engineering, Corn stalk fiber, Asphalt mortar, Orthogonal test, Rheological properties.