Petro Lavreniuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Petro Lavreniuk has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Vitalii Yaropud
Vinnytsia National Agrarian University
4 shared publications - Pavlo Luts
Vinnytsia National Agrarian University
1 shared publication - Serhiy Shargorodskiy
Vinnytsia National Agrarian University
1 shared publication
Latest Publications
- 29 August 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 67
COMPARATIVE ANALYSIS OF THE RESULTS OF EXPERIMENTAL STUDIES AND NUMERICAL MODELING OF THE CONVECTIVE DRYING PROCESS OF WALNUTS
In the current conditions of agro-industrial complex development, increasing the efficiency of post-harvest processing, particularly the drying of walnuts, is of great importance. The quality of the final product and the energy efficiency of the process largely depend on the uniformity of moisture removal and the stability of the temperature regime during drying. One of the promising directions for improving drying units is the use of numerical modeling methods to predict process parameters and optimize dryer design. The combination of experimental research with mathematical analysis makes it possible to evaluate in detail the distribution of temperature, humidity, and air velocity fields within the working chamber, thus ensuring a more accurate selection of the equipment’s operating modes. In this study, CFD-DEM modeling was applied to provide a three-dimensional description of the dynamics of the air flow and the movement of walnut particles, enabling the assessment of local velocity, temperature, and humidity fields, as well as the intensity of heat and mass transfer between phases. A full factorial experiment was carried out with three main drying parameters: screw rotation speed, screen inclination angle, and bunker filling height. The efficiency of the process was evaluated using the criteria of average moisture content and uniformity of moisture distribution within the bunker volume. The results of numerical modeling were experimentally verified on the SGK-4 «TIRAS» dryer, which demonstrated a high level of correspondence between theoretical and experimental dependencies of the time required to achieve maximum mixing efficiency (correlation coefficient 0.79). The obtained results confirm the reliability of the developed mathematical model and its applicability for further optimization of the dryer’s operating parameters, improving drying efficiency, and enhancing the quality of the final product.
- 29 August 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 67
COMPARATIVE ANALYSIS OF THE RESULTS OF EXPERIMENTAL STUDIES AND NUMERICAL MODELING OF THE CONVECTIVE DRYING PROCESS OF WALNUTS
In the current conditions of agro-industrial complex development, increasing the efficiency of post-harvest processing, particularly the drying of walnuts, is of great importance. The quality of the final product and the energy efficiency of the process largely depend on the uniformity of moisture removal and the stability of the temperature regime during drying. One of the promising directions for improving drying units is the use of numerical modeling methods to predict process parameters and optimize dryer design. The combination of experimental research with mathematical analysis makes it possible to evaluate in detail the distribution of temperature, humidity, and air velocity fields within the working chamber, thus ensuring a more accurate selection of the equipment’s operating modes. In this study, CFD-DEM modeling was applied to provide a three-dimensional description of the dynamics of the air flow and the movement of walnut particles, enabling the assessment of local velocity, temperature, and humidity fields, as well as the intensity of heat and mass transfer between phases. A full factorial experiment was carried out with three main drying parameters: screw rotation speed, screen inclination angle, and bunker filling height. The efficiency of the process was evaluated using the criteria of average moisture content and uniformity of moisture distribution within the bunker volume. The results of numerical modeling were experimentally verified on the SGK-4 «TIRAS» dryer, which demonstrated a high level of correspondence between theoretical and experimental dependencies of the time required to achieve maximum mixing efficiency (correlation coefficient 0.79). The obtained results confirm the reliability of the developed mathematical model and its applicability for further optimization of the dryer’s operating parameters, improving drying efficiency, and enhancing the quality of the final product.
- 31 March 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1 (128),p. 27-36
RESEARCH ON THE INFLUENCE OF WARM AIR FLOW ON THE DRYING KINETICS OF WALNUTS
Walnuts are at high risk of oxidative spoilage during storage, transportation and sale. The speed of this process is affected by the chemical composition of the nuts, which varies depending on the variety and region of cultivation. This means that each batch of nuts has a different storage potential. The problem is exacerbated by the lack of an effective system for tracking batches of nuts at all stages: from production to sale. There is also a lack of objective methods for assessing the shelf life of nuts. Because of this, manufacturers and sellers often incorrectly set expiration dates. As a result, according to statistics, more than 30% of walnuts sold in stores have signs of bitterness, which indicates their spoilage. Preservation of the quality of walnuts depends on a number of key factors, among which the level of humidity, temperature, humidity of the ambient air, access of oxygen, condition of the nuts, packaging materials, storage method and technological processing (peeled, in shell, roasted, etc.) play an important role. Although walnuts are considered a product with a long shelf life, maintaining optimal conditions is critical to maintaining their freshness and flavor. The aim of the research is to study the kinetics of drying walnuts under the influence of a warm air flow in laboratory conditions. The results of laboratory studies of the kinetics of drying walnuts with a warm air flow demonstrate that the main process parameters – initial humidity w₀, air temperature T, air flow velocity v and drying duration t – significantly affect the drying rate Vt and the final moisture level wt. The change in nut moisture wt with time t in all studied conditions occurs gradually. The drying rate Vₜ is the highest at the initial stages and decreases with time due to the depletion of surface moisture. Similarly, with increasing air flow velocity, the drying rate increases. In general, optimization of the drying process involves adjusting the temperature and air flow velocity depending on the desired drying time. High temperature and optimal air flow rate ensure efficient drying. It was found that the delay in temperature change becomes shorter with increasing temperature. Thus, it can be considered that at the initial stage (5 h) of walnut drying, it is advisable to apply high-temperature treatment (80 °C) to improve the heat transfer effect and drying performance, which will further increase the drying rate. Subsequently, it is desirable to reduce the drying temperature to (50 °C).
- 31 March 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1 (128),p. 27-36
RESEARCH ON THE INFLUENCE OF WARM AIR FLOW ON THE DRYING KINETICS OF WALNUTS
Walnuts are at high risk of oxidative spoilage during storage, transportation and sale. The speed of this process is affected by the chemical composition of the nuts, which varies depending on the variety and region of cultivation. This means that each batch of nuts has a different storage potential. The problem is exacerbated by the lack of an effective system for tracking batches of nuts at all stages: from production to sale. There is also a lack of objective methods for assessing the shelf life of nuts. Because of this, manufacturers and sellers often incorrectly set expiration dates. As a result, according to statistics, more than 30% of walnuts sold in stores have signs of bitterness, which indicates their spoilage. Preservation of the quality of walnuts depends on a number of key factors, among which the level of humidity, temperature, humidity of the ambient air, access of oxygen, condition of the nuts, packaging materials, storage method and technological processing (peeled, in shell, roasted, etc.) play an important role. Although walnuts are considered a product with a long shelf life, maintaining optimal conditions is critical to maintaining their freshness and flavor. The aim of the research is to study the kinetics of drying walnuts under the influence of a warm air flow in laboratory conditions. The results of laboratory studies of the kinetics of drying walnuts with a warm air flow demonstrate that the main process parameters – initial humidity w₀, air temperature T, air flow velocity v and drying duration t – significantly affect the drying rate Vt and the final moisture level wt. The change in nut moisture wt with time t in all studied conditions occurs gradually. The drying rate Vₜ is the highest at the initial stages and decreases with time due to the depletion of surface moisture. Similarly, with increasing air flow velocity, the drying rate increases. In general, optimization of the drying process involves adjusting the temperature and air flow velocity depending on the desired drying time. High temperature and optimal air flow rate ensure efficient drying. It was found that the delay in temperature change becomes shorter with increasing temperature. Thus, it can be considered that at the initial stage (5 h) of walnut drying, it is advisable to apply high-temperature treatment (80 °C) to improve the heat transfer effect and drying performance, which will further increase the drying rate. Subsequently, it is desirable to reduce the drying temperature to (50 °C).
- 24 December 2024
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 3(114),p. 111-119
EXPERIMENTAL STUDIES OF THE DRYING PROCESS OF WALNUTS IN A CONVECTIVE BUNKER DRYER
Walnuts are a high-calorie source of micro- and macronutrients, which makes them a valuable bio-concentrate for nutrition. However, to preserve their quality during storage and transportation, it is important to consider the botanical variety and growing conditions, as they affect resistance to oxidation. To ensure long-term storage and high quality of walnuts, it is necessary to improve drying methods that allow to reduce humidity to a safe level, minimize energy consumption and reduce the risks of spoilage and oxidative deterioration of product quality. The purpose of the study is to establish the functional dependencies of the process of drying walnuts and justify the optimal design, operating and technological parameters of the convective bunker dryer. An experimental sample of the CGK-4 «Tiras» walnut dryer was made to check the theoretical dependencies and justify the design and technological parameters of the dryer. Experimental studies were conducted on freshly picked walnuts of the Chandler variety with an initial moisture content of 22–28%. The effect of such factors as screw rotation frequency, air supply and drying duration on drying quality, energy consumption and productivity was studied. Modern methods of measuring humidity and energy consumption were used for the research, which made it possible to determine the average moisture of nuts, homogeneity of moisture, productivity of the dryer and efficiency of energy consumption. On the basis of the conducted studies, the functional dependence of the process of drying walnuts was determined, namely changes in the average moisture content of nuts wμ (%), homogeneity of moisture content of nuts in the hopper Θw (%) and specific energy consumption for the drying process Eq (MJ/kg) on the screw rotation frequency n (rpm), air supply Q (m3/h) and drying time t (h). These dependencies make it possible to justify the optimal parameters of the convective hopper dryer to ensure efficient and uniform drying: n = 30.6 rpm, Q = 1690.5 m3/h, t = 10.7 h. With these values wμ = 8%, Θw = 95% and Eq = 0.558 MJ/kg.
- 24 December 2024
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 3(114),p. 111-119
EXPERIMENTAL STUDIES OF THE DRYING PROCESS OF WALNUTS IN A CONVECTIVE BUNKER DRYER
Walnuts are a high-calorie source of micro- and macronutrients, which makes them a valuable bio-concentrate for nutrition. However, to preserve their quality during storage and transportation, it is important to consider the botanical variety and growing conditions, as they affect resistance to oxidation. To ensure long-term storage and high quality of walnuts, it is necessary to improve drying methods that allow to reduce humidity to a safe level, minimize energy consumption and reduce the risks of spoilage and oxidative deterioration of product quality. The purpose of the study is to establish the functional dependencies of the process of drying walnuts and justify the optimal design, operating and technological parameters of the convective bunker dryer. An experimental sample of the CGK-4 «Tiras» walnut dryer was made to check the theoretical dependencies and justify the design and technological parameters of the dryer. Experimental studies were conducted on freshly picked walnuts of the Chandler variety with an initial moisture content of 22–28%. The effect of such factors as screw rotation frequency, air supply and drying duration on drying quality, energy consumption and productivity was studied. Modern methods of measuring humidity and energy consumption were used for the research, which made it possible to determine the average moisture of nuts, homogeneity of moisture, productivity of the dryer and efficiency of energy consumption. On the basis of the conducted studies, the functional dependence of the process of drying walnuts was determined, namely changes in the average moisture content of nuts wμ (%), homogeneity of moisture content of nuts in the hopper Θw (%) and specific energy consumption for the drying process Eq (MJ/kg) on the screw rotation frequency n (rpm), air supply Q (m3/h) and drying time t (h). These dependencies make it possible to justify the optimal parameters of the convective hopper dryer to ensure efficient and uniform drying: n = 30.6 rpm, Q = 1690.5 m3/h, t = 10.7 h. With these values wμ = 8%, Θw = 95% and Eq = 0.558 MJ/kg.
- 1 May 2023
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(120),p. 120-131
WAYS OF IMPROVING THE DESIGN OF THE WALNUT CONVECTIVE DRYER
Walnuts belong to the products most exposed to the risk of oxidative deterioration at the stages of storage, transportation and sale. At the same time, it should be taken into account that specific botanical varieties grown in different geographical regions have an individual chemical composition that determines the intensity of the ongoing oxidation processes, therefore nuts of different batches have different potential for storage. The lack of a system of traceability of purchased nut batches at the stages of production, logistics and sale, as well as the lack of objective methods for assessing the potential level of preservation, which leads to the incorrect establishment of the expiration dates of walnuts, and as a result, more than 30% are sold in trade networks walnuts with signs of bitterness. The quality of nuts during storage depends mainly on the moisture content, storage temperature, relative humidity, oxygen content level, commercial type of nuts, packaging materials, storage form and type of technological processing of nuts (without shell, in shell, fried, etc.). Nuts are products of long-term storage. The purpose of the research is a comprehensive analysis of the operation of modern convective dryers of agricultural raw materials and the determination of ways to improve them to ensure high-quality and uniform drying. According to the results of the analysis of the existing drying units, their disadvantages and advantages were determined. The peculiarities of the application of hopper dryers in various production lines among industrial goods, food products, and construction materials that require mixing of bulk products are analyzed. The use of these dryers has shown high reliability in operation when drying significant volumes of raw materials, absence of stagnant zones, high efficiency of the process and automation of the entire technological process of drying. In order to intensify the process of convective drying, it is necessary to improve the heat and mass transfer both inside and outside the raw material, an increase in the drying temperature will inevitably lead to overheating of the product and loss of biologically useful substances, so one of the ways to increase the drying speed can be the use of mixing devices and devices , installed inside the drying chamber.
- 1 May 2023
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(120),p. 120-131
WAYS OF IMPROVING THE DESIGN OF THE WALNUT CONVECTIVE DRYER
Walnuts belong to the products most exposed to the risk of oxidative deterioration at the stages of storage, transportation and sale. At the same time, it should be taken into account that specific botanical varieties grown in different geographical regions have an individual chemical composition that determines the intensity of the ongoing oxidation processes, therefore nuts of different batches have different potential for storage. The lack of a system of traceability of purchased nut batches at the stages of production, logistics and sale, as well as the lack of objective methods for assessing the potential level of preservation, which leads to the incorrect establishment of the expiration dates of walnuts, and as a result, more than 30% are sold in trade networks walnuts with signs of bitterness. The quality of nuts during storage depends mainly on the moisture content, storage temperature, relative humidity, oxygen content level, commercial type of nuts, packaging materials, storage form and type of technological processing of nuts (without shell, in shell, fried, etc.). Nuts are products of long-term storage. The purpose of the research is a comprehensive analysis of the operation of modern convective dryers of agricultural raw materials and the determination of ways to improve them to ensure high-quality and uniform drying. According to the results of the analysis of the existing drying units, their disadvantages and advantages were determined. The peculiarities of the application of hopper dryers in various production lines among industrial goods, food products, and construction materials that require mixing of bulk products are analyzed. The use of these dryers has shown high reliability in operation when drying significant volumes of raw materials, absence of stagnant zones, high efficiency of the process and automation of the entire technological process of drying. In order to intensify the process of convective drying, it is necessary to improve the heat and mass transfer both inside and outside the raw material, an increase in the drying temperature will inevitably lead to overheating of the product and loss of biologically useful substances, so one of the ways to increase the drying speed can be the use of mixing devices and devices , installed inside the drying chamber.
- 23 December 2022
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 3(118),p. 101-109
SIMULATION OF THE DRYING PROCESS OF WALNUTS IN A CONVECTION DRYER
Walnuts are valued in the world for the nutritional and medicinal properties of the fruits and the versatile character of their use. In particular, they are widely used in confectionery, oil and fat, flour milling, pharmaceutical, chemical, fodder, paint and other industries. To ensure the safety of the walnut crop, it is necessary to condition them. Moisture requirements for whole walnuts are not higher than 10%. Moisture content of whole nuts after harvesting can reach 35-45%. Therefore, it is necessary to carry out drying to bring them to condition. Drying of whole nuts in Ukraine is usually carried out under natural conditions in covered, ventilated rooms. This is due to the fact that it is physically difficult to significantly speed up the process of drying whole nuts with the help of special equipment. In addition, it is economically inefficient, as it requires significant expenditure on energy carriers. However, if the volume of walnuts is significant, it is difficult to do without special drying equipment. Therefore, some enterprises apply forced drying of whole nuts with the help of various drying chambers in order to prevent their spoilage. The purpose of the research is to justify the structural and technological scheme of a convective dryer for walnuts and carry out a simulation of the technological process of drying. Based on the results of the research, the structural and technological scheme of the convective dryer for walnuts, which is made in the form of a mixer with a vertical screw working body with a lower flow of warm air, has been developed and substantiated. Using the Star CCM+ software package, the technological process of drying was simulated in the developed convective dryer. A visualization of the process of redistribution (mixing) of walnut fruits in the drying chamber under the action of the screw working body and the distribution of air flow speed and temperature in the drying chamber of the convective dryer was obtained. According to the coefficient of variation, it was established that the quality of mixing is the best (δ = 0.92±0.02) and remains at this level after 392 s from the moment of the start of rotation of the screw working body. It was established that there is a temperature gradient in the working area of the dryer: the temperature in the lower part is 58±2 °С, in the upper part - 43±2 °С. Given the rather fast mixing (392 s), such a temperature difference is not critical. For a more detailed substantiation of the structural and technological parameters of the developed convective walnut dryer, it is necessary to carry out a full-fledged numerical simulation. It is proposed to choose the following research factors: the angle of the cone-shaped grid, the volume of the drying chamber, the diameter, the step and speed of rotation of the screw working body, the speed and temperature of the incoming air flow. The evaluation criteria should be the coefficient of variation of the redistribution of walnut layers, their average temperature, and the lowest air flow rate in the loaded volume of walnuts.
- 23 December 2022
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 3(118),p. 101-109
SIMULATION OF THE DRYING PROCESS OF WALNUTS IN A CONVECTION DRYER
Walnuts are valued in the world for the nutritional and medicinal properties of the fruits and the versatile character of their use. In particular, they are widely used in confectionery, oil and fat, flour milling, pharmaceutical, chemical, fodder, paint and other industries. To ensure the safety of the walnut crop, it is necessary to condition them. Moisture requirements for whole walnuts are not higher than 10%. Moisture content of whole nuts after harvesting can reach 35-45%. Therefore, it is necessary to carry out drying to bring them to condition. Drying of whole nuts in Ukraine is usually carried out under natural conditions in covered, ventilated rooms. This is due to the fact that it is physically difficult to significantly speed up the process of drying whole nuts with the help of special equipment. In addition, it is economically inefficient, as it requires significant expenditure on energy carriers. However, if the volume of walnuts is significant, it is difficult to do without special drying equipment. Therefore, some enterprises apply forced drying of whole nuts with the help of various drying chambers in order to prevent their spoilage. The purpose of the research is to justify the structural and technological scheme of a convective dryer for walnuts and carry out a simulation of the technological process of drying. Based on the results of the research, the structural and technological scheme of the convective dryer for walnuts, which is made in the form of a mixer with a vertical screw working body with a lower flow of warm air, has been developed and substantiated. Using the Star CCM+ software package, the technological process of drying was simulated in the developed convective dryer. A visualization of the process of redistribution (mixing) of walnut fruits in the drying chamber under the action of the screw working body and the distribution of air flow speed and temperature in the drying chamber of the convective dryer was obtained. According to the coefficient of variation, it was established that the quality of mixing is the best (δ = 0.92±0.02) and remains at this level after 392 s from the moment of the start of rotation of the screw working body. It was established that there is a temperature gradient in the working area of the dryer: the temperature in the lower part is 58±2 °С, in the upper part - 43±2 °С. Given the rather fast mixing (392 s), such a temperature difference is not critical. For a more detailed substantiation of the structural and technological parameters of the developed convective walnut dryer, it is necessary to carry out a full-fledged numerical simulation. It is proposed to choose the following research factors: the angle of the cone-shaped grid, the volume of the drying chamber, the diameter, the step and speed of rotation of the screw working body, the speed and temperature of the incoming air flow. The evaluation criteria should be the coefficient of variation of the redistribution of walnut layers, their average temperature, and the lowest air flow rate in the loaded volume of walnuts.