Vitalii Yaropud
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vitalii Yaropud has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
- Ihor Kupchuk
Vinnytsia National Agrarian University
11 shared publications - Grygorii Kaletnik
Vinnytsia National Agrarian University
7 shared publications - Serhii Burlaka
Vinnytsia National Agrarian University
6 shared publications - Petro Lavreniuk
Vinnytsia National Agrarian University
4 shared publications Yelchin Aliyev
4 shared publications- Andrii Shtuts
Vinnytsia National Agrarian University
3 shared publications
Latest Publications
- Open Access
- 12 October 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 3(122),p. 174
ENERGY ASSESSMENT OF THE DEFORMATION PROCESS OF MINCED MEAT DURING PRODUCT FORMING IN TECHNOLOGICAL EQUIPMENT
The article addresses the issue of determining energy consumption during the deformation of minced meat in food product forming, dosing, and compaction processes. Minced meat is considered as a complex viscoelastic dispersed system characterized by a combination of elastic, viscous, and plastic properties that significantly influence the nature of deformation processes and the energy performance of technological equipment. An analysis of the main factors affecting the deformation work has been carried out, including the internal resistance of the material, friction forces between the product and working surfaces, loading rate, and changes in the structural and mechanical characteristics of minced meat during compaction. A mathematical approach for evaluating the specific deformation work is proposed, taking into account the combined effect of compression work and the work required to overcome friction forces. A viscoelastic model was used to describe the behavior of minced meat, making it possible to consider changes in the rheological properties of the product under loading. A sequence for calculating the energy parameters of the process has been developed, enabling the determination of specific work, power consumption, and the nature of load variation depending on the kinematic parameters of the machine working elements. It has been established that an increase in the degree of compaction is accompanied by a decrease in product porosity, an increase in resistance to deformation, and a rise in specific energy consumption. It is shown that an important task in the design of forming equipment is the determination of the maximum technologically permissible pressure at which further linear deformation of the product practically ceases and additional energy consumption becomes inefficient. The obtained relationships can be used to substantiate rational operating modes of equipment and to select its design parameters.
- 12 October 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- No. 3(122),p. 174
Open AccessENERGY ASSESSMENT OF THE DEFORMATION PROCESS OF MINCED MEAT DURING PRODUCT FORMING IN TECHNOLOGICAL EQUIPMENT
The article addresses the issue of determining energy consumption during the deformation of minced meat in food product forming, dosing, and compaction processes. Minced meat is considered as a complex viscoelastic dispersed system characterized by a combination of elastic, viscous, and plastic properties that significantly influence the nature of deformation processes and the energy performance of technological equipment. An analysis of the main factors affecting the deformation work has been carried out, including the internal resistance of the material, friction forces between the product and working surfaces, loading rate, and changes in the structural and mechanical characteristics of minced meat during compaction. A mathematical approach for evaluating the specific deformation work is proposed, taking into account the combined effect of compression work and the work required to overcome friction forces. A viscoelastic model was used to describe the behavior of minced meat, making it possible to consider changes in the rheological properties of the product under loading. A sequence for calculating the energy parameters of the process has been developed, enabling the determination of specific work, power consumption, and the nature of load variation depending on the kinematic parameters of the machine working elements. It has been established that an increase in the degree of compaction is accompanied by a decrease in product porosity, an increase in resistance to deformation, and a rise in specific energy consumption. It is shown that an important task in the design of forming equipment is the determination of the maximum technologically permissible pressure at which further linear deformation of the product practically ceases and additional energy consumption becomes inefficient. The obtained relationships can be used to substantiate rational operating modes of equipment and to select its design parameters.
- Open Access
- 25 September 2026
- Published by Instytut Gospodarki Surowcami Mineralnymi i Energia Polskiej Akademii Nauk in Polityka Energetyczna – Energy Policy Journal
- Vol. 29 (3) , 121-150
Analysis of reliability and fault resilience of a biogas plant with a cogeneration unit in the power supply system of an agro-industrial complex
This paper analyzes the reliability and fault tolerance of a biogas plant with a cogeneration unit as a complex electrotechnological system. Fault tolerance is considered an integral aspect of reliability, reflecting the system’s ability to localize failures, maintain partial operation, and...
- 25 September 2026
- Published by Instytut Gospodarki Surowcami Mineralnymi i Energia Polskiej Akademii Nauk in Polityka Energetyczna – Energy Policy Journal
- Vol. 29 (3) , 121-150
Open AccessAnalysis of reliability and fault resilience of a biogas plant with a cogeneration unit in the power supply system of an agro-industrial complex
This paper analyzes the reliability and fault tolerance of a biogas plant with a cogeneration unit as a complex electrotechnological system. Fault tolerance is considered an integral aspect of reliability, reflecting the system’s ability to localize failures, maintain partial operation, and...
- Open Access
- 29 May 2026
- Published by Vinnytsia National Technical University in Modern technology, materials and design in construction
- Vol. 40 (1)
INFLUENCE OF TECHNOLOGICAL FACTORS ON THE DURABILITY OF CONCRETE STRUCTURES OF THE AGRO-INDUSTRIAL COMPLEX
The article investigates the influence of technological factors on the durability and operational reliability of concrete structures used in the agro-industrial complex. The study is aimed at identifying the most significant technological parameters that determine the formation of the concrete structure and affect its long-term performance under adverse operating conditions. The operational features of concrete and reinforced concrete structures exposed to high humidity, aggressive organic substances, cyclic temperature variations, dynamic actions, and mechanical loads characteristic of agricultural facilities are analyzed. Such conditions accelerate the deterioration of construction materials and require the application of advanced technologies to ensure the required durability of structures. The main technological factors influencing the physical-mechanical properties of concrete are considered, including the water-cement ratio, compaction intensity, vibration modes, heat treatment parameters, and curing conditions. Particular attention is paid to the formation of the cement stone structure and the development of the contact zone between aggregate particles and the cement matrix. The relationship between technological processing parameters and the resulting density, strength, water resistance, frost resistance, and crack resistance of concrete is established. Special attention is devoted to the application of a complex thermoforce hardening technology that combines heating, compaction, and cyclic vibration of the concrete mixture. The synergistic effect of these factors contributes to the intensification of hydration processes, more uniform distribution of moisture within the concrete mass, reduction of capillary porosity, and formation of a denser and more homogeneous structure. As a result, the concrete demonstrates improved mechanical characteristics and enhanced resistance to environmental influences. The feasibility of applying optimized hardening regimes in the production of structures for grain storage facilities, silos, reservoirs, livestock buildings, manure storage facilities, and other agricultural infrastructure objects is substantiated. The obtained results can be used for the development of resource-saving and energy-efficient technologies for manufacturing concrete products, increasing the service life of building structures, reducing maintenance costs, and improving the overall reliability and sustainability of agro-industrial construction facilities.
- 29 May 2026
- Published by Vinnytsia National Technical University in Modern technology, materials and design in construction
- Vol. 40 (1)
Open AccessINFLUENCE OF TECHNOLOGICAL FACTORS ON THE DURABILITY OF CONCRETE STRUCTURES OF THE AGRO-INDUSTRIAL COMPLEX
The article investigates the influence of technological factors on the durability and operational reliability of concrete structures used in the agro-industrial complex. The study is aimed at identifying the most significant technological parameters that determine the formation of the concrete structure and affect its long-term performance under adverse operating conditions. The operational features of concrete and reinforced concrete structures exposed to high humidity, aggressive organic substances, cyclic temperature variations, dynamic actions, and mechanical loads characteristic of agricultural facilities are analyzed. Such conditions accelerate the deterioration of construction materials and require the application of advanced technologies to ensure the required durability of structures. The main technological factors influencing the physical-mechanical properties of concrete are considered, including the water-cement ratio, compaction intensity, vibration modes, heat treatment parameters, and curing conditions. Particular attention is paid to the formation of the cement stone structure and the development of the contact zone between aggregate particles and the cement matrix. The relationship between technological processing parameters and the resulting density, strength, water resistance, frost resistance, and crack resistance of concrete is established. Special attention is devoted to the application of a complex thermoforce hardening technology that combines heating, compaction, and cyclic vibration of the concrete mixture. The synergistic effect of these factors contributes to the intensification of hydration processes, more uniform distribution of moisture within the concrete mass, reduction of capillary porosity, and formation of a denser and more homogeneous structure. As a result, the concrete demonstrates improved mechanical characteristics and enhanced resistance to environmental influences. The feasibility of applying optimized hardening regimes in the production of structures for grain storage facilities, silos, reservoirs, livestock buildings, manure storage facilities, and other agricultural infrastructure objects is substantiated. The obtained results can be used for the development of resource-saving and energy-efficient technologies for manufacturing concrete products, increasing the service life of building structures, reducing maintenance costs, and improving the overall reliability and sustainability of agro-industrial construction facilities.
- Open Access
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
THEORETICAL STUDY AND MODELING OF AERODYNAMIC LOSSES IN THE CHANNELS OF AN INDIRECT EVAPORATIVE HEAT EXCHANGER
The article provides a theoretical substantiation of the aerodynamic characteristics of an indirect evaporative air heat exchanger operating according to the Maisotsenko thermodynamic cycle (M-cycle) and intended for microclimate control systems in livestock buildings. The study is motivated by increasing summer thermal loads, the limited performance of conventional direct adiabatic cooling, and the need to reduce ventilation energy use without increasing the humidity of supply air. A design concept featuring cross-flow interaction of dry and wet air streams is proposed, enabling deep cooling to temperatures close to the ambient dew point. A comprehensive mathematical model for pressure-loss prediction in the heat exchanger channels is developed. The model is based on an analytical decomposition of the airflow path into characteristic sections and accounts for channel geometry, flow regime, and the equivalent roughness of wetted surfaces. Numerical analysis establishes the influence of channel cross-sectional area, number of channels, and airflow velocity on total aerodynamic resistance and required fan power. The channel cross-sectional shape is shown to be a decisive factor for energy performance: for equal cross-sectional areas, circular channels reduce total pressure losses by up to 26% compared with square and triangular channels. The results can be used to optimize the design of indirect evaporative heat exchangers and to improve the energy efficiency of ventilation and air-conditioning systems in livestock buildings.
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
Open AccessTHEORETICAL STUDY AND MODELING OF AERODYNAMIC LOSSES IN THE CHANNELS OF AN INDIRECT EVAPORATIVE HEAT EXCHANGER
The article provides a theoretical substantiation of the aerodynamic characteristics of an indirect evaporative air heat exchanger operating according to the Maisotsenko thermodynamic cycle (M-cycle) and intended for microclimate control systems in livestock buildings. The study is motivated by increasing summer thermal loads, the limited performance of conventional direct adiabatic cooling, and the need to reduce ventilation energy use without increasing the humidity of supply air. A design concept featuring cross-flow interaction of dry and wet air streams is proposed, enabling deep cooling to temperatures close to the ambient dew point. A comprehensive mathematical model for pressure-loss prediction in the heat exchanger channels is developed. The model is based on an analytical decomposition of the airflow path into characteristic sections and accounts for channel geometry, flow regime, and the equivalent roughness of wetted surfaces. Numerical analysis establishes the influence of channel cross-sectional area, number of channels, and airflow velocity on total aerodynamic resistance and required fan power. The channel cross-sectional shape is shown to be a decisive factor for energy performance: for equal cross-sectional areas, circular channels reduce total pressure losses by up to 26% compared with square and triangular channels. The results can be used to optimize the design of indirect evaporative heat exchangers and to improve the energy efficiency of ventilation and air-conditioning systems in livestock buildings.
- Open Access
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 52
ANALYSIS OF SIDE-EVAPORATIVE HEAT EXCHANGERS IN COGENERATION POWER SUPPLY SYSTEMS BASED ON RENEWABLE ENERGY SOURCES
The article provides a comprehensive analytical review of indirect evaporative coolers (IEC) as a promising element for improving the energy efficiency of cogeneration systems based on renewable energy sources. The relevance of the study is обусловлена the need for the rational use of low-potential heat flows characteristic of biogas, biomass, and hybrid power plants, as well as the reduction of specific energy consumption for cooling under conditions of a growing share of renewable energy in the energy balance. The prerequisites and main directions for the application of indirect evaporative coolers for cooling the air supplied to internal combustion engines operating on biogas, gas turbine and microturbine units, as well as for the utilization of low-potential waste heat, are considered. The physical principles of IEC operation are analyzed, which are based on indirect heat and mass transfer using the latent heat of water evaporation, ensuring intensified heat transfer under conditions of limited temperature differences. The paper systematizes the main design solutions of indirect evaporative coolers, including plate-type, channel-type, and tubular configurations, as well as modern methods for intensifying heat and mass transfer through the use of capillary-porous materials, finned surfaces, and polymer and composite heat-exchange elements. A comparative assessment of industrial solutions offered by leading global manufacturers is presented according to the criteria of thermal efficiency, operational reliability, and economic feasibility of implementation. It is shown that the greatest effect from the use of indirect evaporative coolers is achieved in biogas-based cogeneration systems through the cooling of intake air, which contributes to increasing electrical efficiency, stabilizing thermal operating conditions, and reducing internal energy consumption. Practical recommendations are formulated for selecting the IEC type for agro-industrial enterprises, taking into account climatic operating conditions, water quality, equipment service life requirements, and capital cost limitations.
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 52
Open AccessANALYSIS OF SIDE-EVAPORATIVE HEAT EXCHANGERS IN COGENERATION POWER SUPPLY SYSTEMS BASED ON RENEWABLE ENERGY SOURCES
The article provides a comprehensive analytical review of indirect evaporative coolers (IEC) as a promising element for improving the energy efficiency of cogeneration systems based on renewable energy sources. The relevance of the study is обусловлена the need for the rational use of low-potential heat flows characteristic of biogas, biomass, and hybrid power plants, as well as the reduction of specific energy consumption for cooling under conditions of a growing share of renewable energy in the energy balance. The prerequisites and main directions for the application of indirect evaporative coolers for cooling the air supplied to internal combustion engines operating on biogas, gas turbine and microturbine units, as well as for the utilization of low-potential waste heat, are considered. The physical principles of IEC operation are analyzed, which are based on indirect heat and mass transfer using the latent heat of water evaporation, ensuring intensified heat transfer under conditions of limited temperature differences. The paper systematizes the main design solutions of indirect evaporative coolers, including plate-type, channel-type, and tubular configurations, as well as modern methods for intensifying heat and mass transfer through the use of capillary-porous materials, finned surfaces, and polymer and composite heat-exchange elements. A comparative assessment of industrial solutions offered by leading global manufacturers is presented according to the criteria of thermal efficiency, operational reliability, and economic feasibility of implementation. It is shown that the greatest effect from the use of indirect evaporative coolers is achieved in biogas-based cogeneration systems through the cooling of intake air, which contributes to increasing electrical efficiency, stabilizing thermal operating conditions, and reducing internal energy consumption. Practical recommendations are formulated for selecting the IEC type for agro-industrial enterprises, taking into account climatic operating conditions, water quality, equipment service life requirements, and capital cost limitations.
- 1 January 2026
- Published by Publishing House Helvetica (Publications) in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 2 (157),p. 272-279
METHODS FOR DETERMINING ENVIRONMENTAL PERFORMANCE INDICATORS OF DIESEL ENGINES IN AGRICULTURAL MACHINERY
- 1 January 2026
- Published by Publishing House Helvetica (Publications) in Transactions of Kremenchuk Mykhailo Ostrohradskyi National University
- No. 2 (157),p. 272-279
METHODS FOR DETERMINING ENVIRONMENTAL PERFORMANCE INDICATORS OF DIESEL ENGINES IN AGRICULTURAL MACHINERY
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 55
ANALYTICAL JUSTIFICATION OF AN IMPROVED STRUCTURAL AND TECHNOLOGICAL DESIGN OF A SEEDING UNIT EQUIPPED WITH A VISCOELASTIC DAMPING DEVICE
The study presents an analytical investigation of an improved structural and technological design of a seeding unit equipped with a viscoelastic damping device intended to reduce dynamic oscillations and stabilize seed placement depth. A spatial hinge-linked mechanical system of the basic seeding unit is examined, its structural model is developed, and the mass-inertial, kinematic and force parameters of its main elements – including the horizontal and inclined beams, the opener shank and the gauge wheel – are determined. Based on analytical mechanics, a system of second-order Lagrange differential equations is formulated to describe the oscillatory processes, incorporating the potential and kinetic energy of the system components as well as the effects of soil reaction forces and viscous damping. To evaluate the dynamic response of the seeding unit, numerical simulations were performed in the Wolfram Cloud environment, enabling the determination of time histories of angular and linear displacements and the identification of the oscillation characteristics, including amplitude-frequency behaviour. The results show that the implementation of a viscoelastic damper reduces oscillation amplitude, shifts resonant frequencies and decreases the system’s quality factor, thereby improving the stability of the working elements and enhancing seeding accuracy. A second-order regression model describing the dependence of the coefficient of variation of the frame rotation angle on the damper parameters and seeder forward velocity was developed. This model enables the selection of optimal stiffness and damping values for the viscoelastic element. The obtained results may be used in the design and modernization of seeding units and serve as a basis for further research in the dynamics and vibration loading of agricultural machinery.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 55
ANALYTICAL JUSTIFICATION OF AN IMPROVED STRUCTURAL AND TECHNOLOGICAL DESIGN OF A SEEDING UNIT EQUIPPED WITH A VISCOELASTIC DAMPING DEVICE
The study presents an analytical investigation of an improved structural and technological design of a seeding unit equipped with a viscoelastic damping device intended to reduce dynamic oscillations and stabilize seed placement depth. A spatial hinge-linked mechanical system of the basic seeding unit is examined, its structural model is developed, and the mass-inertial, kinematic and force parameters of its main elements – including the horizontal and inclined beams, the opener shank and the gauge wheel – are determined. Based on analytical mechanics, a system of second-order Lagrange differential equations is formulated to describe the oscillatory processes, incorporating the potential and kinetic energy of the system components as well as the effects of soil reaction forces and viscous damping. To evaluate the dynamic response of the seeding unit, numerical simulations were performed in the Wolfram Cloud environment, enabling the determination of time histories of angular and linear displacements and the identification of the oscillation characteristics, including amplitude-frequency behaviour. The results show that the implementation of a viscoelastic damper reduces oscillation amplitude, shifts resonant frequencies and decreases the system’s quality factor, thereby improving the stability of the working elements and enhancing seeding accuracy. A second-order regression model describing the dependence of the coefficient of variation of the frame rotation angle on the damper parameters and seeder forward velocity was developed. This model enables the selection of optimal stiffness and damping values for the viscoelastic element. The obtained results may be used in the design and modernization of seeding units and serve as a basis for further research in the dynamics and vibration loading of agricultural machinery.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
INVESTIGATION OF THE THERMAL PERFORMANCE OF AN ADAPTIVE TRIPLE-PIPE HEAT RECOVERY UNIT IN LIVESTOCK MICROCLIMATE SYSTEMS
The article presents the results of theoretical and experimental studies of an adaptive triple-pipe heat recovery unit designed to ensure energy-efficient microclimate control in livestock buildings. The relevance of implementing recuperative systems in ventilation complexes operating under conditions of high humidity, dust concentration, and aggressive gaseous environments is substantiated, as traditional heat recovery units often demonstrate low efficiency and limited durability in such settings. The proposed design incorporates three coaxial channels with counter-flow air interaction, adaptive servo-driven dampers, a system of temperature, airflow velocity, and air-quality sensors, as well as an automated control unit that provides dynamic stabilization of operational parameters. A comprehensive evaluation of the thermodynamic and aerodynamic characteristics of the experimental prototype was conducted on a specialized laboratory test bench. The study employed the methodology of a full three-factor experiment (PFE 3³), which enabled the determination of the influence of heat exchanger length, volumetric airflow rate, and outdoor air temperature on the useful thermal output. Based on the experimental data, a regression model was developed, its adequacy statistically confirmed, and significant factors and their interactions identified. It was established that the system exhibits an optimal operating mode at an airflow rate of approximately V ≈ 0.39 m³/s, achieving a maximum thermal output of 4386 W at a length of L = 8 m and an outdoor air temperature of 0 °C. The results confirm the high efficiency of the adaptive triple-pipe configuration and its advantages over conventional recuperators, particularly in terms of uniform heating of supply air, reduced fan energy consumption, and reliable performance under challenging operational conditions. The findings create a foundation for the industrial implementation of the proposed heat recovery unit and further optimization of its structural parameters.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
INVESTIGATION OF THE THERMAL PERFORMANCE OF AN ADAPTIVE TRIPLE-PIPE HEAT RECOVERY UNIT IN LIVESTOCK MICROCLIMATE SYSTEMS
The article presents the results of theoretical and experimental studies of an adaptive triple-pipe heat recovery unit designed to ensure energy-efficient microclimate control in livestock buildings. The relevance of implementing recuperative systems in ventilation complexes operating under conditions of high humidity, dust concentration, and aggressive gaseous environments is substantiated, as traditional heat recovery units often demonstrate low efficiency and limited durability in such settings. The proposed design incorporates three coaxial channels with counter-flow air interaction, adaptive servo-driven dampers, a system of temperature, airflow velocity, and air-quality sensors, as well as an automated control unit that provides dynamic stabilization of operational parameters. A comprehensive evaluation of the thermodynamic and aerodynamic characteristics of the experimental prototype was conducted on a specialized laboratory test bench. The study employed the methodology of a full three-factor experiment (PFE 3³), which enabled the determination of the influence of heat exchanger length, volumetric airflow rate, and outdoor air temperature on the useful thermal output. Based on the experimental data, a regression model was developed, its adequacy statistically confirmed, and significant factors and their interactions identified. It was established that the system exhibits an optimal operating mode at an airflow rate of approximately V ≈ 0.39 m³/s, achieving a maximum thermal output of 4386 W at a length of L = 8 m and an outdoor air temperature of 0 °C. The results confirm the high efficiency of the adaptive triple-pipe configuration and its advantages over conventional recuperators, particularly in terms of uniform heating of supply air, reduced fan energy consumption, and reliable performance under challenging operational conditions. The findings create a foundation for the industrial implementation of the proposed heat recovery unit and further optimization of its structural parameters.
- Open Access
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 21
IMPROVEMENT OF THE SEEDER ROW UNIT DESIGN BASED ON DEM-MODELING
The article addresses a pressing scientific and technical problem–improving the operational stability of seed drill row units under conditions of variable field topography and heterogeneous soil physical-mechanical properties. Modern designs of ground-following and damping mechanisms are analyzed, along with their limitations in maintaining a consistent seed placement depth, as well as design solutions applicable to different types of openers. Particular attention is given to the shortcomings of traditional experimental studies, which do not fully reproduce the real dynamic processes of opener–soil interaction. It is shown that a significant portion of existing designs loses efficiency at higher operating speeds or on uneven field sections, resulting in unstable seeding depth and reduced emergence uniformity. The analysis includes recent research findings related to opener wear, the influence of disk type on seeding quality, the development of combined working tools, and the use of sensor-based depth-control systems. The study identifies the high potential of the Discrete Element Method (DEM) for simulating the dynamics of seed drill row units, as it enables evaluation of furrow formation processes, soil particle behavior, reactive forces, and opener motion stability without the need for numerous physical prototypes. Based on the conducted analysis, a new structural and technological concept of a row unit is proposed, incorporating coordinated operation of the downforce mechanism, damping device, and depth-control system. This configuration provides effective vibration attenuation, reduced impact loads, and improved stability of seed placement depth. The developed design is justified for further optimization and verification using DEM simulation.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- p. 21
Open AccessIMPROVEMENT OF THE SEEDER ROW UNIT DESIGN BASED ON DEM-MODELING
The article addresses a pressing scientific and technical problem–improving the operational stability of seed drill row units under conditions of variable field topography and heterogeneous soil physical-mechanical properties. Modern designs of ground-following and damping mechanisms are analyzed, along with their limitations in maintaining a consistent seed placement depth, as well as design solutions applicable to different types of openers. Particular attention is given to the shortcomings of traditional experimental studies, which do not fully reproduce the real dynamic processes of opener–soil interaction. It is shown that a significant portion of existing designs loses efficiency at higher operating speeds or on uneven field sections, resulting in unstable seeding depth and reduced emergence uniformity. The analysis includes recent research findings related to opener wear, the influence of disk type on seeding quality, the development of combined working tools, and the use of sensor-based depth-control systems. The study identifies the high potential of the Discrete Element Method (DEM) for simulating the dynamics of seed drill row units, as it enables evaluation of furrow formation processes, soil particle behavior, reactive forces, and opener motion stability without the need for numerous physical prototypes. Based on the conducted analysis, a new structural and technological concept of a row unit is proposed, incorporating coordinated operation of the downforce mechanism, damping device, and depth-control system. This configuration provides effective vibration attenuation, reduced impact loads, and improved stability of seed placement depth. The developed design is justified for further optimization and verification using DEM simulation.
- Open Access
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
INVESTIGATION OF THE EFFECT OF STRUCTURAL PARAMETERS OF AN INDIRECT EVAPORATIVE HEAT EXCHANGER ON AIR COOLING EFFICIENCY
The article is devoted to investigating the influence of the structural parameters of an indirect evaporative heat exchanger on the efficiency of air cooling in microclimate control systems for livestock buildings. The relevance of the study is driven by increasing thermal loads during the summer period, higher requirements for maintaining comfortable conditions for animals, and the need to reduce energy consumption associated with air conditioning and ventilation processes in the agro-industrial sector. The feasibility of using indirect evaporative cooling systems as an energy-efficient alternative to conventional compressor-based refrigeration units is substantiated. Such systems allow a reduction in the temperature of supply air without increasing its moisture content. A laboratory-scale experimental prototype of an indirect evaporative heat exchanger with a cross-flow air movement configuration was designed and manufactured. Experimental investigations were carried out by varying the inlet air temperature, absolute humidity, and airflow rate, as well as for two structural configurations of the heat and mass exchanger, featuring identical and different interchannel opening areas. Based on statistical processing of the experimental data, second-order regression equations were obtained for the outlet temperature of the primary air stream, the thermal efficiency coefficient, and the effective cooling capacity of the heat exchanger. The adequacy of the developed mathematical models was confirmed using the Cochran and Fisher criteria, as well as by high correlation coefficients between experimental and calculated results. It was established that the use of different interchannel opening areas intensifies heat and mass transfer processes, reduces the outlet air temperature, and increases thermal efficiency and effective cooling capacity compared to the configuration with identical opening areas. Rational operating modes of the heat exchanger were determined in terms of minimizing outlet air temperature and maximizing energy efficiency. The obtained results can be applied in the design and optimization of microclimate systems for livestock buildings and in the development of automatic control algorithms for air cooling processes.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
Open AccessINVESTIGATION OF THE EFFECT OF STRUCTURAL PARAMETERS OF AN INDIRECT EVAPORATIVE HEAT EXCHANGER ON AIR COOLING EFFICIENCY
The article is devoted to investigating the influence of the structural parameters of an indirect evaporative heat exchanger on the efficiency of air cooling in microclimate control systems for livestock buildings. The relevance of the study is driven by increasing thermal loads during the summer period, higher requirements for maintaining comfortable conditions for animals, and the need to reduce energy consumption associated with air conditioning and ventilation processes in the agro-industrial sector. The feasibility of using indirect evaporative cooling systems as an energy-efficient alternative to conventional compressor-based refrigeration units is substantiated. Such systems allow a reduction in the temperature of supply air without increasing its moisture content. A laboratory-scale experimental prototype of an indirect evaporative heat exchanger with a cross-flow air movement configuration was designed and manufactured. Experimental investigations were carried out by varying the inlet air temperature, absolute humidity, and airflow rate, as well as for two structural configurations of the heat and mass exchanger, featuring identical and different interchannel opening areas. Based on statistical processing of the experimental data, second-order regression equations were obtained for the outlet temperature of the primary air stream, the thermal efficiency coefficient, and the effective cooling capacity of the heat exchanger. The adequacy of the developed mathematical models was confirmed using the Cochran and Fisher criteria, as well as by high correlation coefficients between experimental and calculated results. It was established that the use of different interchannel opening areas intensifies heat and mass transfer processes, reduces the outlet air temperature, and increases thermal efficiency and effective cooling capacity compared to the configuration with identical opening areas. Rational operating modes of the heat exchanger were determined in terms of minimizing outlet air temperature and maximizing energy efficiency. The obtained results can be applied in the design and optimization of microclimate systems for livestock buildings and in the development of automatic control algorithms for air cooling processes.