YLYuanzhuo Liu

Yuanzhuo Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuanzhuo Liu has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Inhomogeneous Dielectric Induced Skew Modeling of Twinax Cables

    by Yuanzhuo Liu, Siqi Bai, Chaofeng Li, Vanine Sabino De Moura, Bichen Chen, Srinivas Venkataraman, Xu Wang, DongHyun Kim

    To understand the skew in twinax cables of separately extrusion and co-extrusion design, the impact of inhomogeneous dielectric in copper twinax cables is analyzed, with an emphasis on signal integrity performance. The inhomogeneity is treated as a perturbation to the RLGC parameters, and analytical equations for calculation of scattering parameters from RLGC parameters are derived to analyze the effects of this perturbation on signal integrity. The inhomogeneity leads to a modulation behavior in the scattering parameters, which decreases asymmetry induced skew at high frequencies and eliminates the resonance of skew in the differential insertion loss. Mathematical analysis, the physical explanation, and various design cases are presented for validation.


  • Surface Roughness Effect From Different Surfaces of Microstrip Lines and Reference Plane

    by Yuanzhuo Liu, Yuandong Guo, Chaofeng Li, Xiaoning Ye, Donghyun Kim

    Microstrip line structures consist of different conductors, such as trace and reference planes, which have different surface roughness levels due to the printed circuit board manufacturing process. The bottom surface of the trace is often rougher than the top surface of the trace, and the roughness levels of different reference planes vary for different foil types and manufacturing processes. To accurately model the additional conductor loss caused by such differences in microstrip lines, a new modeling method is proposed with different roughness levels on different surfaces and a reference plane, in contrast to the traditional roughness modeling approach, which considers a uniform roughness distribution for all surfaces. The effect of the different surfaces on the resistance is determined by applying additional microstrip models to analyze the effect of surface roughness from different surfaces and to improve the accuracy of insertion loss prediction based on the modeled total resistance.


  • Phase Noise Analysis of Clock Generator by Using Phase Noise Sensitivity

    by Yuanzhuo Liu, Yuandong Guo, Chaofeng Li, Siqi Bai, Bichen Chen, Srinivas Venkataraman, Xu Wang, Jun Fan, DongHyun Kim

    Phase noise represents signal instabilities in the frequency domain and is assessed through power measurements at various offsets from the carrier frequency. Herein, the phase noise of a clock generator is analyzed and modeled. Sources for the phase noise of the clock output at the resonance frequency are identified, including the power supply, the heat sink, and the external crystal. Low-frequency resonance is detected and validated to be caused by the external crystal grounding design. Solutions to decrease crystal-related noise are proposed and validated. In addition, the sensitivity based on the signal-to-noise ratio is proposed and verified with measurements, to numerically analyze the effects of power supply noise on clock phase noise. The proposed phase noise sensitivity is extracted from the measured phase noise results and can be used to estimate the phase noise and jitter of different power supply noises. The extraction and prediction method are validated with different buffer types including LVDS, HCSL, LVPECL, and LVCMOS in a device under test with the given design.


  • An Empirical Modeling of Far-End Crosstalk and Insertion Loss in Microstrip Lines

    by Yuanzhuo Liu, Shaohui Yong, Yuandong Guo, Jiayi He, Chaofeng Li, Xiaoning Ye, Jun Fan, Victor Khilkevich, DongHyun Kim

    The difference in the dielectric permittivity of the different dielectric layers (including air) surrounding the microstrip is one of the major contributors to the far-end crosstalk (FEXT) in microstrip lines. The dielectric of the microstrip in printed circuit boards (PCBs) fabrication usually consists of two layers: the solder mask layer and the substrate layer. The characterization of the relative permittivity ( $\varepsilon_{r}$ ), dielectric dissipation factor (tanδ) for the dielectric layers of the microstrip are important parameters for board-level electronic system designs. In addition, the foil surface roughness cannot be ignored for the conductor loss modeling. In this work, an extraction method with high accuracy is proposed to characterize the dielectric material and foil surface roughness properties from the measured S-parameters with known cross-sectional geometry up to 20GHz. With the extracted properties, the FEXT and insertion loss of the microstrip can be estimated more accurately, providing design guidelines for PCB design and the material selection of the microstrip.


  • Analysis of Power-via-Induced Quasi-Quarter-Wavelength Resonance to Reduce Crosstalk

    by Siqi Bai, Yuanzhuo Liu, Jongjoo Lee, Bichen Chen, Srinivas Venkataraman, Xu Wang, Bo Pu, Jun Fan, DongHyun Kim

    Currently, power pins are increasingly used in package design to serve a dual purpose: to support crosstalk isolation between high-speed signals and to provide power delivery to serializer/deserializer input/output. This approach can reduce the overall pin count and subsequently limit the package body size to remain within a ball grid array form factor. However, for printed circuit boards (PCBs) in which power vias are adjacent to signal vias, increased far-end crosstalk (FEXT) and resonance in insertion loss can be observed, due to the quasi-quarter-wavelength resonance of the power via stub. Using an analytical model and 3-D full-wave simulation models, a physical explanation for this unexpected resonance in differential signal pairs is proposed. Considering the difficulty in changing the pin map of the IC package, several PCB layouts are proposed to eliminate the power-via-induced quasi-quarter-wavelength resonance without the need to change the package pin map. Upon application of the proposed methods, the resonance is eliminated, and the FEXT is reduced.


  • Far-End Crosstalk Modeling and Prediction for Stripline With Inhomogeneous Dielectric Layers (IDLs)

    by Yuanzhuo Liu, Shaohui Yong, Yuandong Guo, Jiayi He, Chaofeng Li, Xiaoning Ye, Jun Fan, DongHyun Kim

    Far-end crosstalk (FEXT) is a critical factor that limits signal integrity performance in high-speed systems. The FEXT level is sensitive to the dielectric inhomogeneity of the stripline in fabricated printed circuit boards (PCBs). The dielectric of the stripline is manufactured with multiple inhomogeneous dielectric layers (IDLs) of various resin and glass fiber bundles. A marginal difference in the dielectric permittivity of the IDLs can lead to a significant change FEXT level. In this article, a practical FEXT modeling methodology for striplines is proposed by introducing the extraction method for ${{\boldsymbol{\varepsilon }}}_{\boldsymbol{r}}$ of IDLs. The new stripline model is constructed with three IDLs comprised of core, prepreg, and resin pocket, to improve the model accuracy. With the cross-sectional geometry and measured S-parameters of the coupled striplines, ${{\boldsymbol{\varepsilon }}}_{\boldsymbol{r}}$ of IDLs can be extracted. In addition, an analytical model to predict the FEXT polarity and magnitude of the stripline caused by the inhomogeneity is proposed targeted for prelayout application. The proposed models have been verified using measurement. The proposed models can provide useful analysis methodology and design guidelines to mitigate the FEXT level in high-speed systems, especially for high-volume PCB tests in the prelayout and postlayout stages.


  • Open Access

    Characteristic Mode Analysis Prediction and Guidance of Electromagnetic Coupling Measurements to a UAV Model

    by Mohamed Z. M. Hamdalla, Benjamin Bissen, James D. Hunter, Yuanzhuo Liu, Victor Khilkevich, Daryl G. Beetner, Anthony N. Caruso, Ahmed M. Hassan

    In this work, we study the current coupled to a simplified Unmanned Aerial Vehicle (UAV) model using a dual computational and experimental approach. The simplified surrogate structure reduced the computational burden and facilitated the experimental measurement of the coupled currents. For a practical system, a wide range of simulations and measurements must be performed to analyze the induced current variations with respect to properties of the incident excitation waveform, such as the frequency, angle of incidence, and polarization. To simplify this analysis, Characteristic Mode Analysis (CMA) was used to compute the eigen-currents of the UAV model and predict where and under which RF excitation conditions the coupled current is maximized. We verified these predictions using direct experimental measurement of the coupled currents. The presented simulations and measurements show the usefulness of CMA for studying electromagnetic coupling to practical systems.


  • Dielectric Constant Extraction for Microstrip Transmission Lines Based on S-parameter Measurements and Cross-section

    by Yuanzhuo Liu, Shaohui Yong, Jiangshuai Li, Victor Khilkevich

    In this paper, a new dielectric constant extraction method for the microstrip substrate material is proposed, which is based on measured S-parameter and cross-section analysis of the transmission lines. The calculation process is detailed and application examples are given. The phase constant is calculated from the measured S-parameters. By analyzing the cross-section geometry using a 2D solver, the per-unit-length inductance and capacitance of the air-filled line are obtained. Then using analytical expressions, the dielectric constant of the substrate is extracted from the effective dielectric constant. Comparing to the published method that requires knowing the characteristic impedance of the line, the new method will introduce less error to the extraction procedure and will provide more accurate results.


  • Practical Methods of Interference Cancelation for Power Measurements in a Reverberation Tent

    by Yuanzhuo Liu, Sheng Guo, Ruijie He, Jiangshuai Li, Victor Khilkevich

    In total radiated power (TRP) measurements, it is essential to eliminate the effects of electromagnetic interference caused by the ambient noise. The elimination is usually achieved by shielding. However, shielding may be insufficient, especially in reverberation tents. Under this condition, additional methods are needed to suppress the noise. Practical methods are proposed to suppress the effect of uncorrelated noise signals during the TRP measurement in the reverberation tents. The methods are validated for the cancelation of communication noise, including Wi-Fi, global system for mobile (GSM), and FM signals. If the noise reference signal is available, the noise contribution can be suppressed by ratio averaging. When the reference signal is hard to obtain, blind source separation allows separating the uncorrelated signals from the combination of the intended signal and noise. For intermittent signals, threshold cancelation is proposed.


  • S-Parameter De-Embedding Error Estimation Based on the Statistical Circuit Models of Fixtures

    by Yuanzhuo Liu, Shaohui Yong, Han Gao, Scott Hinaga, Darja Padilla, Douglas Yanagawa, James L. Drewniak, Victor Khilkevich

    S-parameter de-embedding methods require multiple fixtures to be identical. However, due to manufacturing variations, the fixtures are never perfectly identical, which violates the assumptions for the de-embedding algorithms and, in turn, introduces errors. In this article, a novel methodology is proposed to estimate the errors due to de-embedding for practical transmission line measurements. The circuit models of the thru and total lines with fixtures are created. Perturbation in the fixtures is introduced based on the fixture variation estimated by time-domain reflectometry measurements. The method can predict the envelope and estimate the confidence interval of the de-embedded insertion loss using a limited number of simulation cases.