Lingfang Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lingfang Li has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Di Su
The University of Tokyo
2 shared publications Qi Xia
School of Civil Engineering, Southeast University, Nanjing, China
2 shared publicationsQiang Jing
The Hong Kong‒Zhuhai‒Macao Bridge Authority, Zhuhai, Guangdong, China
2 shared publications- Rui Hao
Department of Civil Engineering, Aalto University, 02150 Espoo, Finland
2 shared publications - Weiwei Lin
Department of Civil Engineering, Aalto University, Espoo 02150, Finland
2 shared publications Wenbo Gao
The Hong Kong‒Zhuhai‒Macao Bridge Authority, Zhuhai, Guangdong, China
2 shared publications
Latest Publications
- 23 October 2025
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 29 (9) , 1694-1710
Construction monitoring of horizontal eccentric rotation of small-radius curved girder bridges
Curved bridges are increasingly being used as ramp connections for elevated bridges or tunnels on expressways. However, the construction of curved girder bridges is typically more challenging than building straight bridges, as the eccentric configuration introduces imbalanced forces during assembly. This study proposed a construction monitoring technology for the horizontal rotation of small-radius curved bridges, using a real curved steel box girder bridge as a test case. Featuring a radius of 320 m and a total span of 250 m, the bridge was constructed using the horizontal eccentric rotation method as it crosses over the Guangzhou-Shenzhen Expressway. By integrating finite element analysis and theoretical analysis, key parameters of the entire system were determined with high accuracy. The rotation process was simulated using a building information modeling model to prevent collisions and optimize the details of the construction. Particularly, the entire construction process was carefully monitored to guarantee assembly precision and construction safety. The results were reflected in an intelligent monitoring platform in real time and allowed for dynamic control of the construction process. With the optimized construction process and implementation of real-time monitoring, the rotation of the two T-structures lasted for merely 42 mins and the entire project was completed within 95 days. The proposed technology successfully reduced the construction time and cost, and the project established a benchmark example for future applications.
- 23 October 2025
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 29 (9) , 1694-1710
Construction monitoring of horizontal eccentric rotation of small-radius curved girder bridges
Curved bridges are increasingly being used as ramp connections for elevated bridges or tunnels on expressways. However, the construction of curved girder bridges is typically more challenging than building straight bridges, as the eccentric configuration introduces imbalanced forces during assembly. This study proposed a construction monitoring technology for the horizontal rotation of small-radius curved bridges, using a real curved steel box girder bridge as a test case. Featuring a radius of 320 m and a total span of 250 m, the bridge was constructed using the horizontal eccentric rotation method as it crosses over the Guangzhou-Shenzhen Expressway. By integrating finite element analysis and theoretical analysis, key parameters of the entire system were determined with high accuracy. The rotation process was simulated using a building information modeling model to prevent collisions and optimize the details of the construction. Particularly, the entire construction process was carefully monitored to guarantee assembly precision and construction safety. The results were reflected in an intelligent monitoring platform in real time and allowed for dynamic control of the construction process. With the optimized construction process and implementation of real-time monitoring, the rotation of the two T-structures lasted for merely 42 mins and the entire project was completed within 95 days. The proposed technology successfully reduced the construction time and cost, and the project established a benchmark example for future applications.
- Open Access
- 26 July 2023
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 200
High-fidelity time-series data synthesis based on finite element simulation and data space mapping
- 26 July 2023
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 200
Open AccessHigh-fidelity time-series data synthesis based on finite element simulation and data space mapping
- 15 May 2023
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (9) , 1600-1620
Temperature behavior of cable-stayed bridges. Part II — temperature actions by using unified analysis
The temperature action of long-span cable-stayed bridges is complicated because of the high indeterminacy of their structure. Previous studies on the temperature behavior of bridges were either limited by finite sensors, failing to capture the accurate relation between the temperature field and temperature-induced responses, or constrained to a “divide-and-conquer” strategy, requiring considerable manual intervention and regarded as computationally inefficient. This study develops a unified approach to the investigation of thermal behaviors of cable-stayed bridges by integrating the heat-transfer analysis and structural analysis based on the same refined global 3D finite element model. The companion paper (Part I) investigates the temperature distribution, while this paper (Part II) focuses on temperature-induced responses. The temperature distribution data is automatically converted to thermal loads, and thermal elements are changed to structural elements to calculate the temperature-induced responses of the bridge. Results show that the effect of the temperature variation of cables is nonnegligible and should be taken into account during the structural analysis. The longitudinal displacement of the girder and the longitudinal displacement of the tower top are mainly influenced by the average girder temperature, the mid-span deflection and the cable stress are dominated by the cable temperature and average girder temperature, and the stress of the girder is controlled by the vertical temperature difference. The ratio of the thermal stress to the dead load stress of the girder can reach 96%. The calculated displacement and stress of the bridge agree well with the corresponding measurements, consequently verifying the effectiveness of the proposed unified approach to calculating temperature-induced responses.
- 15 May 2023
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (9) , 1600-1620
Temperature behavior of cable-stayed bridges. Part II — temperature actions by using unified analysis
The temperature action of long-span cable-stayed bridges is complicated because of the high indeterminacy of their structure. Previous studies on the temperature behavior of bridges were either limited by finite sensors, failing to capture the accurate relation between the temperature field and temperature-induced responses, or constrained to a “divide-and-conquer” strategy, requiring considerable manual intervention and regarded as computationally inefficient. This study develops a unified approach to the investigation of thermal behaviors of cable-stayed bridges by integrating the heat-transfer analysis and structural analysis based on the same refined global 3D finite element model. The companion paper (Part I) investigates the temperature distribution, while this paper (Part II) focuses on temperature-induced responses. The temperature distribution data is automatically converted to thermal loads, and thermal elements are changed to structural elements to calculate the temperature-induced responses of the bridge. Results show that the effect of the temperature variation of cables is nonnegligible and should be taken into account during the structural analysis. The longitudinal displacement of the girder and the longitudinal displacement of the tower top are mainly influenced by the average girder temperature, the mid-span deflection and the cable stress are dominated by the cable temperature and average girder temperature, and the stress of the girder is controlled by the vertical temperature difference. The ratio of the thermal stress to the dead load stress of the girder can reach 96%. The calculated displacement and stress of the bridge agree well with the corresponding measurements, consequently verifying the effectiveness of the proposed unified approach to calculating temperature-induced responses.
- 6 May 2023
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (9) , 1579-1599
Temperature behavior of cable-stayed bridges. Part I — Global 3D temperature distribution by integrating heat-transfer analysis and field monitoring data
Varying temperatures significantly affect long-span cable-stayed bridges. However, quantitative studies on their temperature behaviors are limited. Existing studies focus on 2D or 3D models of bridge segments only, exclude cables from heat-transfer analysis, and utilize inaccurate environmental conditions. For the first time, this study comprehensively and accurately investigates the global 3D temperature distribution of long-span cable-stayed bridges by integrating the heat-transfer analysis and field monitoring data. A navigation channel bridge of the Hong Kong‒Zhuhai‒Macao Bridge is used as the testbed. A global 3D refined finite element model of the entire bridge is established. The external thermal boundary conditions of the outer surfaces of the structure are carefully determined based on the real-time ambient temperature, wind, and solar radiation, which are tailored for each surface to reflect the influence of the geometric configuration. The internal thermal boundary conditions of the inner surfaces of the box girder and tower are dependent on the measured ambient temperature, considering the vertical temperature difference of the girder and the uniform temperature inside the tower. Then, the numerical heat-transfer analysis and field monitoring data are integrated to calculate the detailed temperature distribution of the entire bridge in different seasons. Results show that ambient temperature, wind, and solar radiation significantly affect the temperature distribution. For the girder, the vertical temperature difference is significant throughout the year, and the transverse temperature difference is nonnegligible in winter and summer, while the longitudinal temperature difference is trivial. The internal temperature of the tower remains stable owing to the insulation of the concrete. The temperatures of the cables vary from each other, which may cause stress redistribution within the structure. The calculated temperatures are in good agreement with their measured counterparts. The temperature results will be used to calculate the thermal-induced responses in the companion paper in a unified manner.
- 6 May 2023
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (9) , 1579-1599
Temperature behavior of cable-stayed bridges. Part I — Global 3D temperature distribution by integrating heat-transfer analysis and field monitoring data
Varying temperatures significantly affect long-span cable-stayed bridges. However, quantitative studies on their temperature behaviors are limited. Existing studies focus on 2D or 3D models of bridge segments only, exclude cables from heat-transfer analysis, and utilize inaccurate environmental conditions. For the first time, this study comprehensively and accurately investigates the global 3D temperature distribution of long-span cable-stayed bridges by integrating the heat-transfer analysis and field monitoring data. A navigation channel bridge of the Hong Kong‒Zhuhai‒Macao Bridge is used as the testbed. A global 3D refined finite element model of the entire bridge is established. The external thermal boundary conditions of the outer surfaces of the structure are carefully determined based on the real-time ambient temperature, wind, and solar radiation, which are tailored for each surface to reflect the influence of the geometric configuration. The internal thermal boundary conditions of the inner surfaces of the box girder and tower are dependent on the measured ambient temperature, considering the vertical temperature difference of the girder and the uniform temperature inside the tower. Then, the numerical heat-transfer analysis and field monitoring data are integrated to calculate the detailed temperature distribution of the entire bridge in different seasons. Results show that ambient temperature, wind, and solar radiation significantly affect the temperature distribution. For the girder, the vertical temperature difference is significant throughout the year, and the transverse temperature difference is nonnegligible in winter and summer, while the longitudinal temperature difference is trivial. The internal temperature of the tower remains stable owing to the insulation of the concrete. The temperatures of the cables vary from each other, which may cause stress redistribution within the structure. The calculated temperatures are in good agreement with their measured counterparts. The temperature results will be used to calculate the thermal-induced responses in the companion paper in a unified manner.
- Top Cited Papers
- 27 January 2023
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (6) , 985-1010
Thermal behaviors of bridges — A literature review
This work provides a comprehensive review of previous studies concerning the static thermal behaviors of various types of bridges, including beam bridges, arch bridges, cable-stayed, and suspension bridges. Given that thermal behaviors are closely associated with the temperature distribution of bridges, the basis of the heat transfer analysis is briefly introduced first. The studies of the temperature distribution and the temperature actions of each type of bridge are then reviewed from the perspective of theoretical analysis, numerical simulation, experimental tests, and field monitoring. Finally, some existing problems are discussed, and future research topics are recommended.
- 27 January 2023
- Published by SAGE Publications in Advances in Structural Engineering
- Vol. 26 (6) , 985-1010
Top Cited PapersThermal behaviors of bridges — A literature review
This work provides a comprehensive review of previous studies concerning the static thermal behaviors of various types of bridges, including beam bridges, arch bridges, cable-stayed, and suspension bridges. Given that thermal behaviors are closely associated with the temperature distribution of bridges, the basis of the heat transfer analysis is briefly introduced first. The studies of the temperature distribution and the temperature actions of each type of bridge are then reviewed from the perspective of theoretical analysis, numerical simulation, experimental tests, and field monitoring. Finally, some existing problems are discussed, and future research topics are recommended.
- Open Access
- 7 July 2022
- Published by Elsevier in SSRN Electronic Journal
High-Fidelity Time-Series Data Synthesis based on Finite Element Simulation and Data Space Projection
Dynamic responses of structures simulated by finite element (FE) analysis can provide rich information for many downstream tasks, e.g., analysis of structural behaviors, design optimization, data-driven identification tasks, etc. The fidelity of simulated time-series data has a crucial effect on the results of those downstream tasks. Insufficient fidelity of simulation data can cause a typical problem: methods work perfectly on simulation data but are not effective on the actual structures. Meanwhile, owing to the successful adoption of Deep Learning (DL) in the engineering field, the demand for high-fidelity simulation data has greatly increased. FE model updating can partially address this problem. However, the time-series data generated by an updated FE model may still not satisfy the quality requirements of the downstream tasks. The simulated time-series data with higher fidelity are needed to further benefit the downstream tasks. Therefore, we proposed a method to synthesize realistic time-series data using finite element simulation and space projection. Two models, including a Dense Neural Network (DNN) and a Dilated Causal Convolutional Neural Network (DCCNN), were designed for realizing the space projection. Vibration experiments were conducted on an I-shaped steel beam to validate the proposed method. In addition to a case with sufficient training data, a few-short learning case is also investigated. The quality of the synthetic data is quantitively analyzed. Furthermore, the effects of sensor location and impact location on the quality of synthetic data are also discussed. Overall, the high quality of the synthetic time-series data generated by the proposed method is fully demonstrated.
- 7 July 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessHigh-Fidelity Time-Series Data Synthesis based on Finite Element Simulation and Data Space Projection
Dynamic responses of structures simulated by finite element (FE) analysis can provide rich information for many downstream tasks, e.g., analysis of structural behaviors, design optimization, data-driven identification tasks, etc. The fidelity of simulated time-series data has a crucial effect on the results of those downstream tasks. Insufficient fidelity of simulation data can cause a typical problem: methods work perfectly on simulation data but are not effective on the actual structures. Meanwhile, owing to the successful adoption of Deep Learning (DL) in the engineering field, the demand for high-fidelity simulation data has greatly increased. FE model updating can partially address this problem. However, the time-series data generated by an updated FE model may still not satisfy the quality requirements of the downstream tasks. The simulated time-series data with higher fidelity are needed to further benefit the downstream tasks. Therefore, we proposed a method to synthesize realistic time-series data using finite element simulation and space projection. Two models, including a Dense Neural Network (DNN) and a Dilated Causal Convolutional Neural Network (DCCNN), were designed for realizing the space projection. Vibration experiments were conducted on an I-shaped steel beam to validate the proposed method. In addition to a case with sufficient training data, a few-short learning case is also investigated. The quality of the synthetic data is quantitively analyzed. Furthermore, the effects of sensor location and impact location on the quality of synthetic data are also discussed. Overall, the high quality of the synthetic time-series data generated by the proposed method is fully demonstrated.