Martin Roche
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Martin Roche has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Adriana Morana
Université Jean Monnet Saint-Etienne
15 shared publications - Sylvain Girard
Université Jean Monnet Saint-Etienne
15 shared publications - Emmanuel Marin
Laboratoire Hubert Curien, UMR CNRS 5516, Université Jean Monnet, 42000 Saint-Etienne, France
14 shared publications - Aziz Boukenter
Laboratoire Hubert Curien, UMR CNRS 5516, Université Jean Monnet, 42000 Saint-Etienne, France
13 shared publications - Youcef Ouerdane
Laboratoire Hubert Curien, UMR CNRS 5516, Université Jean Monnet, 42000 Saint-Etienne, France
13 shared publications - Gilles Mélin
Exail, Lannion, France
8 shared publications
Latest Publications
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Vers les dosimètres à fibre optiques pour les applications dans les milieux spatiaux
Les missions spatiales à long terme prévues pour repousser les limites de l’humanité deviennent de plus en plus concrètes. L'espace n'est plus réservé uniquement aux programmes internationaux et nationaux, mais devient également un lieu privilégié pour les projets et concepts des entreprises commerciales, poussant chaque acteur à innover et conduisant à une variété de programmes spatiaux. Parmi les principales difficultés pour réaliser ces ambitions, la sécurité de la santé humaine reste essentielle et les rayonnements ionisants sont considérés comme un risque sanitaire régulier. Alors que l'environnement de rayonnement dans l'espace pourrait être décrit comme un vaste éventail de particules primaires couvrant une large gamme d'énergies, il menace de différentes manières l'intégrité des êtres vivants, des matériaux et des composants. Pour atténuer les risques potentiels associés aux radiations, les systèmes et les équipages doivent être informés du risque de rayonnement et être capables de réagir promptement. Un dosimètre robuste, fournissant des mesures en temps réel des débits de dose, peut aider à anticiper les événements solaires avec les réactions appropriées. Le dosimètre Lumina a permis de démontrer les capacités des fibres optiques pour ces problématiques de dosimétrie en exploitant le phénomène d’atténuation induite par radiation. Les détections d’événements singuliers tels que les passages dans l’anomalie de l'Atlantique Sud ou les conséquences d’éruptions solaires témoignent des performances atteintes. Lumina reste un premier prototype qui conserve encore quelques limitations. Néanmoins, ces dernières peuvent être surmontées avec les solutions techniques adaptées. Tous les outils nécessaires pour une version améliorée, une Lumina 2.0, sont désormais à disposition.
- 9 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Vers les dosimètres à fibre optiques pour les applications dans les milieux spatiaux
Les missions spatiales à long terme prévues pour repousser les limites de l’humanité deviennent de plus en plus concrètes. L'espace n'est plus réservé uniquement aux programmes internationaux et nationaux, mais devient également un lieu privilégié pour les projets et concepts des entreprises commerciales, poussant chaque acteur à innover et conduisant à une variété de programmes spatiaux. Parmi les principales difficultés pour réaliser ces ambitions, la sécurité de la santé humaine reste essentielle et les rayonnements ionisants sont considérés comme un risque sanitaire régulier. Alors que l'environnement de rayonnement dans l'espace pourrait être décrit comme un vaste éventail de particules primaires couvrant une large gamme d'énergies, il menace de différentes manières l'intégrité des êtres vivants, des matériaux et des composants. Pour atténuer les risques potentiels associés aux radiations, les systèmes et les équipages doivent être informés du risque de rayonnement et être capables de réagir promptement. Un dosimètre robuste, fournissant des mesures en temps réel des débits de dose, peut aider à anticiper les événements solaires avec les réactions appropriées. Le dosimètre Lumina a permis de démontrer les capacités des fibres optiques pour ces problématiques de dosimétrie en exploitant le phénomène d’atténuation induite par radiation. Les détections d’événements singuliers tels que les passages dans l’anomalie de l'Atlantique Sud ou les conséquences d’éruptions solaires témoignent des performances atteintes. Lumina reste un premier prototype qui conserve encore quelques limitations. Néanmoins, ces dernières peuvent être surmontées avec les solutions techniques adaptées. Tous les outils nécessaires pour une version améliorée, une Lumina 2.0, sont désormais à disposition.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Optimizing the Performances of Phosphorus Doped Optical Fiber Dosimeters Operating in the Visible Domain
We investigate the performances of a dosimeter exploiting the radiation induced attenuation (RIA) of phosphosilicate multimode optical fiber in the visible domain. For this, we investigate the visible RIA under various irradiation conditions: dose up to 15 Gy, dose rates from 675 μGy/s to 50 mGy/s and temperatures of irradiation from -40 °C to 80 °C. This study was supplemented by an extensive analysis of the effect of photobleaching on the RIA and its impact on the dosimetry applications. Using optical fibers with larger cores enable to mitigate the undesirable effects of photobleaching on dosimetry performances observed with single-mode fibers. The results have enabled the development of a mathematical tool for simulating fiber performance based on its intrinsic parameters and the dose deposited.
- 3 April 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. PP (00189499) , 1
Optimizing the Performances of Phosphorus Doped Optical Fiber Dosimeters Operating in the Visible Domain
We investigate the performances of a dosimeter exploiting the radiation induced attenuation (RIA) of phosphosilicate multimode optical fiber in the visible domain. For this, we investigate the visible RIA under various irradiation conditions: dose up to 15 Gy, dose rates from 675 μGy/s to 50 mGy/s and temperatures of irradiation from -40 °C to 80 °C. This study was supplemented by an extensive analysis of the effect of photobleaching on the RIA and its impact on the dosimetry applications. Using optical fibers with larger cores enable to mitigate the undesirable effects of photobleaching on dosimetry performances observed with single-mode fibers. The results have enabled the development of a mathematical tool for simulating fiber performance based on its intrinsic parameters and the dose deposited.
- 1 February 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (3)
Photobleaching Effects Caused by Ambient Light on the Radiation‐Induced Attenuation of Germanosilicate Optical Fibers
We demonstrate the influence of the ambient lightning on the X‐ray radiation‐induced attenuation (RIA) in the visible to infrared domains of germanosilicate optical fibers (OFs). RIA spectra and kinetics are then discussed depending on the illumination conditions in terms of point defects and also from a practical point of view. In the presence of an external illumination, the RIA levels can change and therefore lead to misinterpretations during irradiation campaigns. This study highlights the role of the GeY defect in infrared Ge‐doped OF RIA and its significant sensitivity to photobleaching.
- 1 February 2026
- Published by Wiley in Physica Status Solidi (a)
- Vol. 223 (3)
Photobleaching Effects Caused by Ambient Light on the Radiation‐Induced Attenuation of Germanosilicate Optical Fibers
We demonstrate the influence of the ambient lightning on the X‐ray radiation‐induced attenuation (RIA) in the visible to infrared domains of germanosilicate optical fibers (OFs). RIA spectra and kinetics are then discussed depending on the illumination conditions in terms of point defects and also from a practical point of view. In the presence of an external illumination, the RIA levels can change and therefore lead to misinterpretations during irradiation campaigns. This study highlights the role of the GeY defect in infrared Ge‐doped OF RIA and its significant sensitivity to photobleaching.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (17) , 8474-8483
Characterization and Radiation Testing of an Embedded, Distributed Fiber Dosimetry System for Space Applications
A distributed dosimetry system based on phosphorus-doped optical fiber interrogated by an embedded Optical Time-Domain Reflectometer (OTDR) operated around 1610 nm is investigated for its performance, accuracy, repeatability and reliability in radiation environments corresponding to space applications. We analyzed the metrological properties of the system, showing an accuracy of ±6% on dose measurement using the minimum pulse width, and characterized the evolution of measurement uncertainty according to the sampling length. We demonstrated the system ability to measure Total Ionizing Dose under γ- and X-rays, at four dose rates ranging from 5.8 μGy(SiO2)/s to 5038 μGy(SiO2)/s, and with doses up to 344 Gy(SiO2). Finally, the device reliability under 350 MeV and 480 MeV proton irradiation was tested. No Single-Event Latchups (SEL) have been observed up to a fluence of ∼4.2×109 cm−2 and the Single-Event Functional Interrupt (SEFI) cross-section was on the order of ∼10-8 cm2, equivalent to ∼11.5 days in low Earth Orbit.
- 8 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (17) , 8474-8483
Characterization and Radiation Testing of an Embedded, Distributed Fiber Dosimetry System for Space Applications
A distributed dosimetry system based on phosphorus-doped optical fiber interrogated by an embedded Optical Time-Domain Reflectometer (OTDR) operated around 1610 nm is investigated for its performance, accuracy, repeatability and reliability in radiation environments corresponding to space applications. We analyzed the metrological properties of the system, showing an accuracy of ±6% on dose measurement using the minimum pulse width, and characterized the evolution of measurement uncertainty according to the sampling length. We demonstrated the system ability to measure Total Ionizing Dose under γ- and X-rays, at four dose rates ranging from 5.8 μGy(SiO2)/s to 5038 μGy(SiO2)/s, and with doses up to 344 Gy(SiO2). Finally, the device reliability under 350 MeV and 480 MeV proton irradiation was tested. No Single-Event Latchups (SEL) have been observed up to a fluence of ∼4.2×109 cm−2 and the Single-Event Functional Interrupt (SEFI) cross-section was on the order of ∼10-8 cm2, equivalent to ∼11.5 days in low Earth Orbit.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1165-1171
Temperature Dependence of the Radiation Response of Ultralow-Loss Optical Fibers: Role of Self-Trapped Holes
We investigated the temperature (-60 °C, 20 °C 100 °C) dependence of the X-ray radiation induced attenuation (RIA) in the visible to infrared spectral domain of an ultra-low loss (ULL) pure silica core (PSC) single mode optical fiber. This fiber was shown to be very radiation sensitive at room temperature with extremely high RIA levels in the whole spectral domain. The RIA levels and kinetics exhibit a strong dependence on the temperature of irradiation. The nature and the properties of the radiation induced point defects at the origin of the fiber darkening are discussed and in particular the influence of the different variants of the self-trapped holes (STHs). STHs play a key role in the response of this class of optical fiber as in the ones of the most advanced radiation hardened optical fibers.
- 24 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1165-1171
Temperature Dependence of the Radiation Response of Ultralow-Loss Optical Fibers: Role of Self-Trapped Holes
We investigated the temperature (-60 °C, 20 °C 100 °C) dependence of the X-ray radiation induced attenuation (RIA) in the visible to infrared spectral domain of an ultra-low loss (ULL) pure silica core (PSC) single mode optical fiber. This fiber was shown to be very radiation sensitive at room temperature with extremely high RIA levels in the whole spectral domain. The RIA levels and kinetics exhibit a strong dependence on the temperature of irradiation. The nature and the properties of the radiation induced point defects at the origin of the fiber darkening are discussed and in particular the influence of the different variants of the self-trapped holes (STHs). STHs play a key role in the response of this class of optical fiber as in the ones of the most advanced radiation hardened optical fibers.
- 23 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1137-1144
14-MeV and Atmospheric Neutron Monitoring Through Optical Fiber Dosimeters
Radiation-induced attenuation (RIA) based dosimetry exploiting phosphosilicate optical fiber has been established as a reliable and precise dosimetry technique, able to monitor the total ionizing dose in a variety of harsh environments. We evaluate here the potential of this technology to monitor 14 MeV and atmospheric neutrons. Experiments performed at the TNF facility from TRIUMF and FNG from ENEA demonstrate, that after calibration, the fiber dosimeter can serve as an efficient fluence monitor, the RIA being linearly dependent on the neutron fluence. Using Geant4 simulations, we show that the radiation sensitivity of the fiber, around 3.5 dB km -1 Gy -1 for 14 MeV neutrons agrees with the ones found in previous studies for photons and protons. For atmospheric neutrons, the calibration differs by a factor of up to 2.5 with respect to usual factor. Extensive simulations are performed showing that in these neutron environments, the consideration of the real 3D structure of the fiber coil is mandatory for a fine calibration of the dosimeter. Perspectives for fiber dosimetry of neutron rich environments are then discussed.
- 23 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 1137-1144
14-MeV and Atmospheric Neutron Monitoring Through Optical Fiber Dosimeters
Radiation-induced attenuation (RIA) based dosimetry exploiting phosphosilicate optical fiber has been established as a reliable and precise dosimetry technique, able to monitor the total ionizing dose in a variety of harsh environments. We evaluate here the potential of this technology to monitor 14 MeV and atmospheric neutrons. Experiments performed at the TNF facility from TRIUMF and FNG from ENEA demonstrate, that after calibration, the fiber dosimeter can serve as an efficient fluence monitor, the RIA being linearly dependent on the neutron fluence. Using Geant4 simulations, we show that the radiation sensitivity of the fiber, around 3.5 dB km -1 Gy -1 for 14 MeV neutrons agrees with the ones found in previous studies for photons and protons. For atmospheric neutrons, the calibration differs by a factor of up to 2.5 with respect to usual factor. Extensive simulations are performed showing that in these neutron environments, the consideration of the real 3D structure of the fiber coil is mandatory for a fine calibration of the dosimeter. Perspectives for fiber dosimetry of neutron rich environments are then discussed.
- Top Cited PapersOpen Access
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 982-1020
Overview of Radiation Effects on Silica-Based Optical Fibers and Fiber Sensors
This review focuses on silica-based optical fibers, guiding light through the total internal reflection mechanism, that are currently used in telecommunications and sensor networks. Section I briefly introduces the fiber and fiber sensor technologies. Section II presents their various applications in radiation environments. In section III, the radiation effects on optical fibers are explained, first at a microscopic scale, with the description of point defects generated by irradiation. Then, the macroscopic consequences of the appearance of these point defects are discussed, in particular the phenomena of radiation-induced attenuation (RIA), radiation-induced emission (RIE) and radiation-induced refractive index change (RIRIC). RIA impacts nearly all applications under irradiation. We then detail the various parameters, intrinsic or extrinsic to the optical fibers that influence their amplitudes and kinetics. This improved knowledge paved the way for the radiation hardening of optical fibers through various approaches, either at material, component or system levels, that are described in section IV. Recent advances are presented for passive and for active rare-earth doped optical fibers and systems. Then, the use of fiber optic sensors is introduced, starting in section V with the latest advances in radiation-hardened point or distributed sensors. Then, the potential of this technology for radiation detection, beam instrumentation and dosimetry applications is assessed in section VI. Finally, the future prospects and the main challenges to be met in order to accelerate the implementation of this technology in the harshest environments are discussed.
- 4 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (4) , 982-1020
Top Cited PapersOpen AccessOverview of Radiation Effects on Silica-Based Optical Fibers and Fiber Sensors
This review focuses on silica-based optical fibers, guiding light through the total internal reflection mechanism, that are currently used in telecommunications and sensor networks. Section I briefly introduces the fiber and fiber sensor technologies. Section II presents their various applications in radiation environments. In section III, the radiation effects on optical fibers are explained, first at a microscopic scale, with the description of point defects generated by irradiation. Then, the macroscopic consequences of the appearance of these point defects are discussed, in particular the phenomena of radiation-induced attenuation (RIA), radiation-induced emission (RIE) and radiation-induced refractive index change (RIRIC). RIA impacts nearly all applications under irradiation. We then detail the various parameters, intrinsic or extrinsic to the optical fibers that influence their amplitudes and kinetics. This improved knowledge paved the way for the radiation hardening of optical fibers through various approaches, either at material, component or system levels, that are described in section IV. Recent advances are presented for passive and for active rare-earth doped optical fibers and systems. Then, the use of fiber optic sensors is introduced, starting in section V with the latest advances in radiation-hardened point or distributed sensors. Then, the potential of this technology for radiation detection, beam instrumentation and dosimetry applications is assessed in section VI. Finally, the future prospects and the main challenges to be met in order to accelerate the implementation of this technology in the harshest environments are discussed.
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2548-2554
Photobleaching Effects on the Radiation-Induced Attenuation of Germanosilicate Optical Fibers at Low Temperature
The photobleaching (PB) can be employed to reduce the excess of losses induced by radiation in silica-based optical fibers, known as radiation-induced attenuation (RIA). PB consists in a light-annealing of some of the radiation-induced point defects, during or after irradiation. We investigate the PB effects induced by 10 mW power pumps at three different wavelengths (660 nm, 980 nm or 1550 nm) on the visible to infrared RIA of a standard Ge-doped single-mode optical fiber, the Corning SMF28e+, at room and low temperatures (-100°C). We perform spectral measurements with a home-made acquisition system, in order to investigate the nature of the radiation-induced defects at the two temperatures and which of them are affected by the PB at these three wavelengths. Whereas the RIA at RT can be reproduced only with the contributions of Ge-related point defects, at -100°C, a defect related to the silica matrix significantly contributes to the strong RIA observed: the strain-assisted Self Trapped Hole (sa-STH2). The pump at 1550 nm does not influence strongly (less than 30%) the RIA in all the spectral range at both temperatures. The ones at shorter wavelengths, instead, reduce the RIA at -100°C by at least one order of magnitude, allowing to reach RIA levels comparable to those measured at RT. The concentrations of all defects decrease when the two shorter wavelength pumps are used, except for the ones responsible for the RIA at longer wavelengths: the Ge-STH and an unidentified contribution around 0.9 eV (~1400 nm).
- 21 November 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Nuclear Science
- Vol. 72 (8) , 2548-2554
Photobleaching Effects on the Radiation-Induced Attenuation of Germanosilicate Optical Fibers at Low Temperature
The photobleaching (PB) can be employed to reduce the excess of losses induced by radiation in silica-based optical fibers, known as radiation-induced attenuation (RIA). PB consists in a light-annealing of some of the radiation-induced point defects, during or after irradiation. We investigate the PB effects induced by 10 mW power pumps at three different wavelengths (660 nm, 980 nm or 1550 nm) on the visible to infrared RIA of a standard Ge-doped single-mode optical fiber, the Corning SMF28e+, at room and low temperatures (-100°C). We perform spectral measurements with a home-made acquisition system, in order to investigate the nature of the radiation-induced defects at the two temperatures and which of them are affected by the PB at these three wavelengths. Whereas the RIA at RT can be reproduced only with the contributions of Ge-related point defects, at -100°C, a defect related to the silica matrix significantly contributes to the strong RIA observed: the strain-assisted Self Trapped Hole (sa-STH2). The pump at 1550 nm does not influence strongly (less than 30%) the RIA in all the spectral range at both temperatures. The ones at shorter wavelengths, instead, reduce the RIA at -100°C by at least one order of magnitude, allowing to reach RIA levels comparable to those measured at RT. The concentrations of all defects decrease when the two shorter wavelength pumps are used, except for the ones responsible for the RIA at longer wavelengths: the Ge-STH and an unidentified contribution around 0.9 eV (~1400 nm).
- Open Access
Photobleaching Effect on the Sensitivity Calibration at 638 nm of a Phosphorus-Doped Single-Mode Optical Fiber Dosimeter
We investigated the influence of the photobleaching (PB) effect on the dosimetry performances of a phosphosilicate single-mode optical fiber (core diameter of 6.6 µm) operated at 638 nm, within the framework of the LUMINA project. Different irradiation tests were performed under ~40 keV mean energy fluence X-rays at a 530 µ Gy(SiO2)/s dose rate to measure in situ the radiation-induced attenuation (RIA) growth and decay kinetics while injecting a 638 nm laser diode source with powers varying from 500 nW to 1 mW. For injected continuous power values under 1 µW, we did not measure any relevant influence of the photobleaching effect on the fiber radiation sensitivity coefficient of ~140 dB km−1 Gy−1 up to ~30 Gy. Above 1 µW, the fiber radiation sensitivity is significantly reduced due to the PB associated with the signal and can decrease to ~80 dB km−1 Gy−1 at 1 mW, strongly affecting the capability of this fiber to serve as a dosimeter-sensitive element. Higher power values up to 50 µW can still be used by properly choosing a pulsed regime with periodic injection cycles to reduce the PB efficiency and maintain the dosimetry properties. Basing on the acquired data, a simple model of the photobleaching effect on a coil of the investigated fiber is proposed in order to estimate its sensitivity coefficient evolution as a function of the cumulated dose and its fiber length when injecting a certain laser power. Additional studies need to investigate the influence of the temperature and the dose rate on the PB effects since these parameters were fixed during all the reported acquisitions.
Open AccessPhotobleaching Effect on the Sensitivity Calibration at 638 nm of a Phosphorus-Doped Single-Mode Optical Fiber Dosimeter
We investigated the influence of the photobleaching (PB) effect on the dosimetry performances of a phosphosilicate single-mode optical fiber (core diameter of 6.6 µm) operated at 638 nm, within the framework of the LUMINA project. Different irradiation tests were performed under ~40 keV mean energy fluence X-rays at a 530 µ Gy(SiO2)/s dose rate to measure in situ the radiation-induced attenuation (RIA) growth and decay kinetics while injecting a 638 nm laser diode source with powers varying from 500 nW to 1 mW. For injected continuous power values under 1 µW, we did not measure any relevant influence of the photobleaching effect on the fiber radiation sensitivity coefficient of ~140 dB km−1 Gy−1 up to ~30 Gy. Above 1 µW, the fiber radiation sensitivity is significantly reduced due to the PB associated with the signal and can decrease to ~80 dB km−1 Gy−1 at 1 mW, strongly affecting the capability of this fiber to serve as a dosimeter-sensitive element. Higher power values up to 50 µW can still be used by properly choosing a pulsed regime with periodic injection cycles to reduce the PB efficiency and maintain the dosimetry properties. Basing on the acquired data, a simple model of the photobleaching effect on a coil of the investigated fiber is proposed in order to estimate its sensitivity coefficient evolution as a function of the cumulated dose and its fiber length when injecting a certain laser power. Additional studies need to investigate the influence of the temperature and the dose rate on the PB effects since these parameters were fixed during all the reported acquisitions.