Defu Zang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Defu Zang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Yongli Ji
China Research Institute of Radiowave Propagation, Xinxiang, Henan, China
2 shared publications - Yongsheng Chao
SINOPEC MATRIX Corp 1 , GEO-MWD/LWD & Logging Research Institute, Qingdao, China.;;
2 shared publications - Zhiqiang Li
China Research Institute of Radiowave Propagation, Xinxiang 453000, China
2 shared publications Feng Sun
SINOPEC Shengli Oilfield Service Corporation Well Logging Company
1 shared publicationFu-Ming Zhang
SINOPEC Shengli Oilfield Service Corporation Well Logging Company
1 shared publication- Huaxiong Wang
The 22nd Research Institute of CETC 2 , Xinxiang, China.;;
1 shared publication
Latest Publications
- 7 January 2024
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 89 (4) , D243-D254
Research on high-power and high-efficiency emission of crosswell electromagnetic logging
Crosswell electromagnetic (EM) logging has useful applications in oil, gas, and water monitoring as well as carbon sequestration estimation. Difficulties in the efficient propagation of EM waves through a steel casing inhibit crosswell EM logging at distances greater than 300 m. This study investigates whether high-power transmission and high-efficiency transmitting antennas can resolve the challenges of long-distance crosswell EM logging through steel casings. Theoretical analysis indicates that the emission moment should be at least 12,000 A·m2. By calculating the equivalent relative permeability and selecting the appropriate coil materials and magnetic cores, the maximum emission magnetic moment can create a high-power transmission. Based on series and parallel resonant circuits and the alternating current/direct current cable core multiplexing power supply method, the effective transmission bandwidth is broadened and the transmission efficiency increases by three times. The emission unit is fabricated and tested using single, double, and fiberglass casing. We observe that the crosswell EM technology performs better for nonmetal casing wells than that for metal casing wells. The amplitude and phase curves between two fiberglass casing wells in the range of 425 m are quite smooth. However, the receiving signals in the double-layer steel casing decrease to only a few tenths of the value in the fiberglass casing wells, highlighting the difficulty of long-distance EM wave transmission when using steel casings. Thus, studies on EM transmission through four or more layers of steel casings should be conducted in the future.
- 7 January 2024
- Published by Society of Exploration Geophysicists in Geophysics
- Vol. 89 (4) , D243-D254
Research on high-power and high-efficiency emission of crosswell electromagnetic logging
Crosswell electromagnetic (EM) logging has useful applications in oil, gas, and water monitoring as well as carbon sequestration estimation. Difficulties in the efficient propagation of EM waves through a steel casing inhibit crosswell EM logging at distances greater than 300 m. This study investigates whether high-power transmission and high-efficiency transmitting antennas can resolve the challenges of long-distance crosswell EM logging through steel casings. Theoretical analysis indicates that the emission moment should be at least 12,000 A·m2. By calculating the equivalent relative permeability and selecting the appropriate coil materials and magnetic cores, the maximum emission magnetic moment can create a high-power transmission. Based on series and parallel resonant circuits and the alternating current/direct current cable core multiplexing power supply method, the effective transmission bandwidth is broadened and the transmission efficiency increases by three times. The emission unit is fabricated and tested using single, double, and fiberglass casing. We observe that the crosswell EM technology performs better for nonmetal casing wells than that for metal casing wells. The amplitude and phase curves between two fiberglass casing wells in the range of 425 m are quite smooth. However, the receiving signals in the double-layer steel casing decrease to only a few tenths of the value in the fiberglass casing wells, highlighting the difficulty of long-distance EM wave transmission when using steel casings. Thus, studies on EM transmission through four or more layers of steel casings should be conducted in the future.
- 10 November 2022
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 11 (1) , T171-T180
Signal processing methods for crosswell electromagnetic imaging system
The principle of crosswell electromagnetic (EM) imaging is similar to that of induction logging. The difference between them is that conventional induction logging can only measure the formation conductivity within a few meters around the well. However, crosswell EM imaging can be used in two wells with a separation distance of up to 1000 m. Several novel signal processing methods for crosswell EM imaging systems are developed for calibration, casing correction, and hybrid Jacobian matrix calculation. To conveniently perform calibration on the ground, the EM field formula in a vertical layered media is derived based on Maxwell equations, and the relationships between the received signal and frequency, formation conductivity, and transceiver spacing are subsequently derived. Furthermore, a new calibration method is developed. The EM field formula for a radial layered media is derived, and the analytical expressions describing the relationship between the receiving signal and borehole parameters, metal casing parameters, formation parameters, and receiver location are obtained. The effects of mud resistivity, metal casing position, metal casing resistivity, permeability, cement ring resistivity, transmitting frequency, and receiver location on the crosswell EM receiving signal are simulated. It is determined that only the casing required a correction. The influence of the metal casing is corrected by establishing a database. The difference between the corrected data and data obtained without a metal casing is less than 1%. There is a large error in the calculation of the Jacobian matrix in some regions when Green’s function was used. A hybrid Jacobian matrix calculation method combining local perturbation and a global Green’s function is developed, which significantly reduced the error and improved the inversion accuracy.
- 10 November 2022
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 11 (1) , T171-T180
Signal processing methods for crosswell electromagnetic imaging system
The principle of crosswell electromagnetic (EM) imaging is similar to that of induction logging. The difference between them is that conventional induction logging can only measure the formation conductivity within a few meters around the well. However, crosswell EM imaging can be used in two wells with a separation distance of up to 1000 m. Several novel signal processing methods for crosswell EM imaging systems are developed for calibration, casing correction, and hybrid Jacobian matrix calculation. To conveniently perform calibration on the ground, the EM field formula in a vertical layered media is derived based on Maxwell equations, and the relationships between the received signal and frequency, formation conductivity, and transceiver spacing are subsequently derived. Furthermore, a new calibration method is developed. The EM field formula for a radial layered media is derived, and the analytical expressions describing the relationship between the receiving signal and borehole parameters, metal casing parameters, formation parameters, and receiver location are obtained. The effects of mud resistivity, metal casing position, metal casing resistivity, permeability, cement ring resistivity, transmitting frequency, and receiver location on the crosswell EM receiving signal are simulated. It is determined that only the casing required a correction. The influence of the metal casing is corrected by establishing a database. The difference between the corrected data and data obtained without a metal casing is less than 1%. There is a large error in the calculation of the Jacobian matrix in some regions when Green’s function was used. A hybrid Jacobian matrix calculation method combining local perturbation and a global Green’s function is developed, which significantly reduced the error and improved the inversion accuracy.
- 12 July 2020
- Published by Springer Nature
- p. 1640-1653
Detection of the Good Conductor Outside Casing Using Comparative Receiver Coil System
- 12 July 2020
- Published by Springer Nature
- p. 1640-1653
Detection of the Good Conductor Outside Casing Using Comparative Receiver Coil System