Valeria Piccioni
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Valeria Piccioni has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Arno Schlueter
Institute of Technology in Architecture, ETH Zurich
3 shared publications Bharath Seshadri
2 shared publicationsFabio Gramazio
2 shared publications- Lars Oliver Grobe
Chair of Architecture and Building Systems, Institute of Technology in Architecture, ETH Zurich, Stefano-Franscini-Platz 1, 8093 Zürich, Switzerland
2 shared publications Matthias Kohler
2 shared publications- Matthias Leschok
Digital Building Technologies, ETH Zürich, Zürich, Switzerland
2 shared publications
Latest Publications
- Open Access
- 6 July 2024
- Published by Stichting OpenAccess Foundation in Journal of Facade Design and Engineering
- Vol. 12 (1)
Integration of a 3D-Printed Façade Unit in a Curtain Wall System
Plastic materials, known for their lightweight, formability, transparency, and durability, are the state of the art for building façade applications. Recent advances in Large-Scale Robotic 3D Printing (LSR3DP) have enabled the production of bespoke, translucent façade components. While research has largely focused on individual panel properties, there is a gap in developing a comprehensive strategy for integrating these components into a complete façade system. This paper explores the potential of combining custom 3D-printed façade elements with standard curtain wall connections. Quantitative analysis involves constructing and testing a 1 m x 1 m LSR3DP façade assembly for air and water tightness, benchmarking its performance against a conventional curtain wall. Qualitatively, the approach is evaluated through a mock-up, highlighting the architectural possibilities of blending standard and non-standard façade elements. The findings demonstrate that this hybrid system is both technically viable and opens new design possibilities for architects and façade engineers.
- 6 July 2024
- Published by Stichting OpenAccess Foundation in Journal of Facade Design and Engineering
- Vol. 12 (1)
Open AccessIntegration of a 3D-Printed Façade Unit in a Curtain Wall System
Plastic materials, known for their lightweight, formability, transparency, and durability, are the state of the art for building façade applications. Recent advances in Large-Scale Robotic 3D Printing (LSR3DP) have enabled the production of bespoke, translucent façade components. While research has largely focused on individual panel properties, there is a gap in developing a comprehensive strategy for integrating these components into a complete façade system. This paper explores the potential of combining custom 3D-printed façade elements with standard curtain wall connections. Quantitative analysis involves constructing and testing a 1 m x 1 m LSR3DP façade assembly for air and water tightness, benchmarking its performance against a conventional curtain wall. Qualitatively, the approach is evaluated through a mock-up, highlighting the architectural possibilities of blending standard and non-standard façade elements. The findings demonstrate that this hybrid system is both technically viable and opens new design possibilities for architects and façade engineers.
- Open Access
- 4 July 2024
- Published by Elsevier in Developments in the Built Environment
- Vol. 19
Thermal and manufacturing properties of hollow-core 3D-printed elements for lightweight facades
- 4 July 2024
- Published by Elsevier in Developments in the Built Environment
- Vol. 19
Open AccessThermal and manufacturing properties of hollow-core 3D-printed elements for lightweight facades
- Open Access
- 7 May 2024
- Published by Elsevier in Energy and Buildings
- Vol. 314
From layer to building: Multiscale modeling of thermo-optical properties in 3D-printed facades
- 7 May 2024
- Published by Elsevier in Energy and Buildings
- Vol. 314
Open AccessFrom layer to building: Multiscale modeling of thermo-optical properties in 3D-printed facades
- 1 December 2023
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 10 (6) , 1164-1177
Light Distribution in 3D-Printed Thermoplastics
Daylight distribution is an essential performance parameter for building facades that aim to maximize user comfort while maintaining energy efficiency. This study investigates the feasibility of using 3D-printed thermoplastic to improve daylight distribution and transmission. To identify how geometry influences light distribution and transmission, 12 samples with various patterns were robotically fabricated. In a physical simulation of spring, summer, and winter, a robotic arm was used to direct light onto the samples in both the vertical and horizontal print pattern directions. In addition, three samples of conventional facade materials, including a polycarbonate panel, a polycarbonate sheet, and a single sheet of glass, were compared with the 3D-printed samples. All samples were examined and compared using high dynamic range imaging to qualitatively characterize luminance. The data analysis demonstrated that 3D-printed geometry can successfully generate customizable diffusive light distribution based on the needs of the user. Furthermore, the results showed that the vertical pattern direction had higher light transmission values than the horizontal pattern direction.
- 1 December 2023
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 10 (6) , 1164-1177
Light Distribution in 3D-Printed Thermoplastics
Daylight distribution is an essential performance parameter for building facades that aim to maximize user comfort while maintaining energy efficiency. This study investigates the feasibility of using 3D-printed thermoplastic to improve daylight distribution and transmission. To identify how geometry influences light distribution and transmission, 12 samples with various patterns were robotically fabricated. In a physical simulation of spring, summer, and winter, a robotic arm was used to direct light onto the samples in both the vertical and horizontal print pattern directions. In addition, three samples of conventional facade materials, including a polycarbonate panel, a polycarbonate sheet, and a single sheet of glass, were compared with the 3D-printed samples. All samples were examined and compared using high dynamic range imaging to qualitatively characterize luminance. The data analysis demonstrated that 3D-printed geometry can successfully generate customizable diffusive light distribution based on the needs of the user. Furthermore, the results showed that the vertical pattern direction had higher light transmission values than the horizontal pattern direction.
- Open Access
- 1 August 2023
- Published by KEAI Publishing in Frontiers of Architectural Research
- Vol. 12 (4) , 754-774
Geometry-based graphical methods for solar control in architecture: A digital framework
- 1 August 2023
- Published by KEAI Publishing in Frontiers of Architectural Research
- Vol. 12 (4) , 754-774
Open AccessGeometry-based graphical methods for solar control in architecture: A digital framework
- Open Access
- 30 January 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (6)
Tuning the Solar Performance of Building Facades through Polymer 3D Printing: Toward Bespoke Thermo‐Optical Properties
Façades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large‐scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricating façade components with bespoke properties and functionalities. Transmissivity is essential for building facades, as the response to solar radiation is crucial to obtaining comfort and greatly affects electricity and cooling demands. However, it is still unclear how 3DP parameters affect the optical properties of translucent polymers. This study establishes an experimental procedure to relate the optical properties of PETG components to design and 3DP parameters. It is observed that printing parameters control layer deposition, which governs internal light scattering in the layers and overall light transmission. Moreover, the layer resolution determines angle‐dependent properties. It is shown that printing parameters can be tuned to obtain tailored optical properties, from high normal transparency (≈90%) to translucency (≈60%), and with a range of haze levels (≈55–97%). These findings present an opportunity for large‐scale 3DP of bespoke façades, which can selectively admit or block solar radiation and provide uniform daylighting of a space. In the context of the building sector decarbonization, such components hold great potential for reducing emissions while ensuring occupant comfort.
- 30 January 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (6)
Open AccessTuning the Solar Performance of Building Facades through Polymer 3D Printing: Toward Bespoke Thermo‐Optical Properties
Façades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large‐scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricating façade components with bespoke properties and functionalities. Transmissivity is essential for building facades, as the response to solar radiation is crucial to obtaining comfort and greatly affects electricity and cooling demands. However, it is still unclear how 3DP parameters affect the optical properties of translucent polymers. This study establishes an experimental procedure to relate the optical properties of PETG components to design and 3DP parameters. It is observed that printing parameters control layer deposition, which governs internal light scattering in the layers and overall light transmission. Moreover, the layer resolution determines angle‐dependent properties. It is shown that printing parameters can be tuned to obtain tailored optical properties, from high normal transparency (≈90%) to translucency (≈60%), and with a range of haze levels (≈55–97%). These findings present an opportunity for large‐scale 3DP of bespoke façades, which can selectively admit or block solar radiation and provide uniform daylighting of a space. In the context of the building sector decarbonization, such components hold great potential for reducing emissions while ensuring occupant comfort.