Matthias Leschok
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Matthias Leschok has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Benjamin Dillenburger
Digital Building Technologies, ETH Zürich, Zürich, Switzerland
4 shared publicationsArno Schlueter
2 shared publicationsBharath Seshadri
2 shared publicationsFabio Gramazio
2 shared publicationsMatthias Kohler
2 shared publications- Valeria Piccioni
ETH Zurich
2 shared publications
Latest Publications
- 1 August 2025
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 12 (4) , 403-412
Three-Dimensionally Printed Hierarchal Sand Structures for Space Heating Applications
In addition to the well-documented resource efficiency and geometrical freedom, Digital Fabrication (DFAB) revolutionizes architecture by integrating functionalities into building elements, unlocking untapped potential from the micro- to the macroscales. This study uses binder-jet printed sand for a DFAB prototype—Fireplace2—tailored for indoor heating. Named after its traditional counterpart, Fireplace2 showcases DFAB’s prowess in crafting precise microclimates for heightened thermal comfort. Our research, tuning mechanical and thermal properties across micro and meso scales, illustrates DFAB's utility in architects' hands for crafting tailored microclimates. This approach manipulates the effective thermal conductivity and macroscale topology for stability against toppling (0.8 kN). A vertical infill porosity gradient establishes a surface temperature gradient, countering ventilation-induced thermal gradients. With a minimal operational temperature vertical gradient (+0.2°C), complying with international comfort standards (Predicted Mean Vote −0.23, People Dissatisfied 6%), Fireplace2 stands testament to DFAB’s microclimate-shaping capabilities despite challenges like foot-level ventilation. The study propels DFAB into a sustainable paradigm, aligning occupant comfort with environmental consciousness, thereby fostering more efficient and enjoyable indoor spaces.
- 1 August 2025
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 12 (4) , 403-412
Three-Dimensionally Printed Hierarchal Sand Structures for Space Heating Applications
In addition to the well-documented resource efficiency and geometrical freedom, Digital Fabrication (DFAB) revolutionizes architecture by integrating functionalities into building elements, unlocking untapped potential from the micro- to the macroscales. This study uses binder-jet printed sand for a DFAB prototype—Fireplace2—tailored for indoor heating. Named after its traditional counterpart, Fireplace2 showcases DFAB’s prowess in crafting precise microclimates for heightened thermal comfort. Our research, tuning mechanical and thermal properties across micro and meso scales, illustrates DFAB's utility in architects' hands for crafting tailored microclimates. This approach manipulates the effective thermal conductivity and macroscale topology for stability against toppling (0.8 kN). A vertical infill porosity gradient establishes a surface temperature gradient, countering ventilation-induced thermal gradients. With a minimal operational temperature vertical gradient (+0.2°C), complying with international comfort standards (Predicted Mean Vote −0.23, People Dissatisfied 6%), Fireplace2 stands testament to DFAB’s microclimate-shaping capabilities despite challenges like foot-level ventilation. The study propels DFAB into a sustainable paradigm, aligning occupant comfort with environmental consciousness, thereby fostering more efficient and enjoyable indoor spaces.
- Open Access
- 3 July 2025
- Published by Elsevier in Developments in the Built Environment
- Vol. 23
Material characterization and structural behaviour of HC3DP elements for lightweight facades
- 3 July 2025
- Published by Elsevier in Developments in the Built Environment
- Vol. 23
Open AccessMaterial characterization and structural behaviour of HC3DP elements for lightweight facades
- Open Access
- 4 July 2024
- Published by Elsevier in Developments in the Built Environment
- Vol. 19
Thermal and manufacturing properties of hollow-core 3D-printed elements for lightweight facades
- 4 July 2024
- Published by Elsevier in Developments in the Built Environment
- Vol. 19
Open AccessThermal and manufacturing properties of hollow-core 3D-printed elements for lightweight facades
- Open Access
- 1 June 2024
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 11 (3) , 907-918
Large-Scale Hollow-Core 3D Printing: Variable Cross-Section and Printing Features for Lightweight Plastic Elements
Hollow-core 3D printing (HC3DP) proposes a new method for the production of lightweight, material-efficient thermoplastic 3D printed elements. This new fabrication approach promises material savings of 50–80%, while increasing the extrusion rate significantly (factor 10). This development pushes HC3DP to a similar fabrication speed as high-resolution concrete 3D printing. However, fundamental research on printing features enabled by this novel 3D printing approach is missing. Therefore, this article investigates printing with user-controlled bead dimensions (same nozzle, different size). It is showcased that the size of the extruded cross-section is determined by the positive air pressure used to inflate the beads. Multiple samples are printed, changing the layer height and width significantly without making changes to the hardware setup. Sections of 3DP samples are analyzed and the parameters of 3DP beads are determined. Furthermore, a set of bespoke 3D printed nozzles is introduced to subdivide the HC3DP beads into distinct areas. So far only regular beads, such as hollow tubes, have been used for 3D printing. Samples of those bespoke sections are analyzed to investigate their behavior when used for 3D printing. Finally, large-scale 3D printing experiments are conducted to investigate how printing features like bridging, cantilevering, or nonplanar 3D printing can be manufactured with hollow extrusion beads. In summary, this article provides insights into the fundamental 3D printing behaviors of HC3DP, showcases new design possibilities with bespoke and variable cross-sections, and finally proposes new research trajectories based on the findings presented.
- 1 June 2024
- Published by SAGE Publications in 3D Printing and Additive Manufacturing
- Vol. 11 (3) , 907-918
Open AccessLarge-Scale Hollow-Core 3D Printing: Variable Cross-Section and Printing Features for Lightweight Plastic Elements
Hollow-core 3D printing (HC3DP) proposes a new method for the production of lightweight, material-efficient thermoplastic 3D printed elements. This new fabrication approach promises material savings of 50–80%, while increasing the extrusion rate significantly (factor 10). This development pushes HC3DP to a similar fabrication speed as high-resolution concrete 3D printing. However, fundamental research on printing features enabled by this novel 3D printing approach is missing. Therefore, this article investigates printing with user-controlled bead dimensions (same nozzle, different size). It is showcased that the size of the extruded cross-section is determined by the positive air pressure used to inflate the beads. Multiple samples are printed, changing the layer height and width significantly without making changes to the hardware setup. Sections of 3DP samples are analyzed and the parameters of 3DP beads are determined. Furthermore, a set of bespoke 3D printed nozzles is introduced to subdivide the HC3DP beads into distinct areas. So far only regular beads, such as hollow tubes, have been used for 3D printing. Samples of those bespoke sections are analyzed to investigate their behavior when used for 3D printing. Finally, large-scale 3D printing experiments are conducted to investigate how printing features like bridging, cantilevering, or nonplanar 3D printing can be manufactured with hollow extrusion beads. In summary, this article provides insights into the fundamental 3D printing behaviors of HC3DP, showcases new design possibilities with bespoke and variable cross-sections, and finally proposes new research trajectories based on the findings presented.
- Open Access
- 14 November 2023
- Published by Elsevier in Additive Manufacturing
- Vol. 78
Large-scale hollow-core 3D printing (HC3DP): A polymer 3D printing technology for large-scale ultralightweight components
- 14 November 2023
- Published by Elsevier in Additive Manufacturing
- Vol. 78
Open AccessLarge-scale hollow-core 3D printing (HC3DP): A polymer 3D printing technology for large-scale ultralightweight components
- Open Access
- 30 January 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (6)
Tuning the Solar Performance of Building Facades through Polymer 3D Printing: Toward Bespoke Thermo‐Optical Properties
Façades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large‐scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricating façade components with bespoke properties and functionalities. Transmissivity is essential for building facades, as the response to solar radiation is crucial to obtaining comfort and greatly affects electricity and cooling demands. However, it is still unclear how 3DP parameters affect the optical properties of translucent polymers. This study establishes an experimental procedure to relate the optical properties of PETG components to design and 3DP parameters. It is observed that printing parameters control layer deposition, which governs internal light scattering in the layers and overall light transmission. Moreover, the layer resolution determines angle‐dependent properties. It is shown that printing parameters can be tuned to obtain tailored optical properties, from high normal transparency (≈90%) to translucency (≈60%), and with a range of haze levels (≈55–97%). These findings present an opportunity for large‐scale 3DP of bespoke façades, which can selectively admit or block solar radiation and provide uniform daylighting of a space. In the context of the building sector decarbonization, such components hold great potential for reducing emissions while ensuring occupant comfort.
- 30 January 2023
- Published by Wiley in Advanced Materials Technologies
- Vol. 8 (6)
Open AccessTuning the Solar Performance of Building Facades through Polymer 3D Printing: Toward Bespoke Thermo‐Optical Properties
Façades are the primary interface controlling the flow of solar energy in buildings and affecting their energy balance and environmental impact. Recently, large‐scale 3D printing (3DP) of translucent polymers has been explored as a technique for fabricating façade components with bespoke properties and functionalities. Transmissivity is essential for building facades, as the response to solar radiation is crucial to obtaining comfort and greatly affects electricity and cooling demands. However, it is still unclear how 3DP parameters affect the optical properties of translucent polymers. This study establishes an experimental procedure to relate the optical properties of PETG components to design and 3DP parameters. It is observed that printing parameters control layer deposition, which governs internal light scattering in the layers and overall light transmission. Moreover, the layer resolution determines angle‐dependent properties. It is shown that printing parameters can be tuned to obtain tailored optical properties, from high normal transparency (≈90%) to translucency (≈60%), and with a range of haze levels (≈55–97%). These findings present an opportunity for large‐scale 3DP of bespoke façades, which can selectively admit or block solar radiation and provide uniform daylighting of a space. In the context of the building sector decarbonization, such components hold great potential for reducing emissions while ensuring occupant comfort.