Heng Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Heng Xu has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Yinghui Quan
Xidian University
9 shared publications - Hong Xu
Xidian University
8 shared publications - Qin Pan
School of Information Mechanics and Sensing Engineering, Xidian University, Xian, China
6 shared publications Naiwen Zhang
Hangzhou Research Institute, Xidian University, Hangzhou, China
3 shared publications- Haosheng Fu
Hangzhou Research Institute, Xidian University, Hangzhou, China
2 shared publications - Hui Chen
State Key Laboratory of Millimeter Waves, Southeast University, Nanjing, China
2 shared publications
Latest Publications
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-14
An ISAR Reconfigurable Shaping Method Utilizing Phase Modulation Metasurface
The coding scheme of the modulated phase is critical for ISAR jamming methods based on phase modulation meta-surface (PMM). Existing studies predominantly adopt periodic or random phase coding schemes, which yield relatively regular effects on ISAR imaging and are consequently susceptible to detection by radar systems. To this end, this paper proposes a feature-regulation method that relies on PMM to achieve ISAR reconfigurable shaping by designing modulation-phase encoding that reshapes the ISAR image of a PMM target into that of another target, thereby enabling customizable ISAR features for PMM and disrupting wideband radar recognition. Specifically, through theoretical derivation, the scattering point distribution of the shaped ISAR image is first characterized through the frequency spectrum distribution of the phase modulation sequence for PMM in the two-dimensional range–azimuth frequency domain. Subsequently, a weighted least-squares two-dimensional spectral approximation model under constant amplitude (CA) constraints is constructed to ensure that the frequency spectrum distribution of the modulation phase sequence closely matches the scattering point distribution of the shaped ISAR image, and this problem is effectively solved using a cyclic and gradient projection (GP) algorithm. Finally, simulations and experimental measurements are conducted to validate the effectiveness of the proposed method.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-14
An ISAR Reconfigurable Shaping Method Utilizing Phase Modulation Metasurface
The coding scheme of the modulated phase is critical for ISAR jamming methods based on phase modulation meta-surface (PMM). Existing studies predominantly adopt periodic or random phase coding schemes, which yield relatively regular effects on ISAR imaging and are consequently susceptible to detection by radar systems. To this end, this paper proposes a feature-regulation method that relies on PMM to achieve ISAR reconfigurable shaping by designing modulation-phase encoding that reshapes the ISAR image of a PMM target into that of another target, thereby enabling customizable ISAR features for PMM and disrupting wideband radar recognition. Specifically, through theoretical derivation, the scattering point distribution of the shaped ISAR image is first characterized through the frequency spectrum distribution of the phase modulation sequence for PMM in the two-dimensional range–azimuth frequency domain. Subsequently, a weighted least-squares two-dimensional spectral approximation model under constant amplitude (CA) constraints is constructed to ensure that the frequency spectrum distribution of the modulation phase sequence closely matches the scattering point distribution of the shaped ISAR image, and this problem is effectively solved using a cyclic and gradient projection (GP) algorithm. Finally, simulations and experimental measurements are conducted to validate the effectiveness of the proposed method.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1870-1875
Quantized Joint-Phase Optimization Network for Time-Modulated Metasurface-Assisted Radar Deception Jamming
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1870-1875
Quantized Joint-Phase Optimization Network for Time-Modulated Metasurface-Assisted Radar Deception Jamming
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-16
Passive Barrage Jamming for SAR via Optimized Time-Domain Metasurface Modulation
Time-domain modulated metasurfaces (TMMs) enable passive radar jamming by dynamically altering incident waveforms. We introduce the concept of passive barrage jamming, where a TMM redistributes target energy to suppress dominant features in the synthetic aperture radar (SAR) imaging without active radiation. Traditional approaches, such as random phase modulation, can disperse target energy but lack a principle framework for shaping the SAR response, leaving detectable residual signatures. In this work, the design of TMM modulation sequences is formulated as a non-convex minimax optimization problem to improve the energy distribution of the SAR imaging. An alternating direction method of multipliers framework is developed to solve the problem efficiently under the constant-modulus constraint, with theoretical guarantees of monotonic convergence under suitable parameter settings. In SAR simulations, the optimized TMM sequences achieve a peak reduction of 70.18 dB for a point target and 48.29 dB for an extended target compared to the unmodulated baseline, outperforming both random and structured coding schemes. Experimental validation on a practical 1-bit TMM platform confirms a 12.87 dB peak reduction in one-dimensional matched filtering, despite phase quantization and hardware nonidealities. These results highlight the effectiveness of the proposed optimization approach in enhancing TMM-based barrage jamming performance, providing a robust and practical solution for radar countermeasures.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-16
Passive Barrage Jamming for SAR via Optimized Time-Domain Metasurface Modulation
Time-domain modulated metasurfaces (TMMs) enable passive radar jamming by dynamically altering incident waveforms. We introduce the concept of passive barrage jamming, where a TMM redistributes target energy to suppress dominant features in the synthetic aperture radar (SAR) imaging without active radiation. Traditional approaches, such as random phase modulation, can disperse target energy but lack a principle framework for shaping the SAR response, leaving detectable residual signatures. In this work, the design of TMM modulation sequences is formulated as a non-convex minimax optimization problem to improve the energy distribution of the SAR imaging. An alternating direction method of multipliers framework is developed to solve the problem efficiently under the constant-modulus constraint, with theoretical guarantees of monotonic convergence under suitable parameter settings. In SAR simulations, the optimized TMM sequences achieve a peak reduction of 70.18 dB for a point target and 48.29 dB for an extended target compared to the unmodulated baseline, outperforming both random and structured coding schemes. Experimental validation on a practical 1-bit TMM platform confirms a 12.87 dB peak reduction in one-dimensional matched filtering, despite phase quantization and hardware nonidealities. These results highlight the effectiveness of the proposed optimization approach in enhancing TMM-based barrage jamming performance, providing a robust and practical solution for radar countermeasures.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 8118-8135
Quantitative Analysis of Metasurface With Random Phase Modulation on Complex HRRP: A Statistical Perspective
Analyzing the influence of metasurface phase encoding on high-resolution range profile (HRRP) is essential for the design of modulation strategies and interference suppression. Periodic phase modulation (PPM) and random phase modulation (RPM), as the primary phase encoding methods of metasurfaces, have been extensively studied in recent years for their influence on HRRP. Compared to PPM, analyzing the influence of RPM on HRRP is challenging due to its inherent randomness. Existing research has primarily provided qualitative analyses of the influence of RPM on HRRP, without investigating the underlying quantitative relationships. In this article, the main approach is to analyze the quantitative influence of RPM on complex HRRP from a statistical perspective, examining its influence on the complex HRRP, the energy of the complex HRRP, and the autocorrelation between the energy of the complex HRRP. First, a joint probability density function (JPDF) is constructed with the real and imaginary parts of complex HRRP as random variables, and the quantitative relationship between the corresponding statistical parameters and modulation parameters is provided. Secondly, the expression for the average complex HRRP energy is derived, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Third, the expression for the autocorrelation function of the average complex HRRP energy is presented, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Finally, simulations and experiments are conducted to validate the conclusions provided.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 8118-8135
Quantitative Analysis of Metasurface With Random Phase Modulation on Complex HRRP: A Statistical Perspective
Analyzing the influence of metasurface phase encoding on high-resolution range profile (HRRP) is essential for the design of modulation strategies and interference suppression. Periodic phase modulation (PPM) and random phase modulation (RPM), as the primary phase encoding methods of metasurfaces, have been extensively studied in recent years for their influence on HRRP. Compared to PPM, analyzing the influence of RPM on HRRP is challenging due to its inherent randomness. Existing research has primarily provided qualitative analyses of the influence of RPM on HRRP, without investigating the underlying quantitative relationships. In this article, the main approach is to analyze the quantitative influence of RPM on complex HRRP from a statistical perspective, examining its influence on the complex HRRP, the energy of the complex HRRP, and the autocorrelation between the energy of the complex HRRP. First, a joint probability density function (JPDF) is constructed with the real and imaginary parts of complex HRRP as random variables, and the quantitative relationship between the corresponding statistical parameters and modulation parameters is provided. Secondly, the expression for the average complex HRRP energy is derived, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Third, the expression for the autocorrelation function of the average complex HRRP energy is presented, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Finally, simulations and experiments are conducted to validate the conclusions provided.
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (8) , 5443-5456
Theoretical Analysis of Random Phase Modulation Effects on Radar Pulse Compression by the Time-Modulated Metasurface
Metasurfaces can degrade radar pulse compression (PC) performance by encoding radar echoes with time-domain random phase modulation (RPM), which alters the correlation between the echo signal and the reference signal. Analyzing the quantitative impact of metasurface RPM on radar PC is crucial for designing encoding strategies and modulation suppression. However, due to the random nature of encoding, quantitatively analyzing its impact on radar PC is challenging. To address this problem, a quantitative analysis of the impact of RPM on radar PC performance from a statistical perspective is conducted in this work. First, from the frequency-domain analysis, a theoretical model of the average energy spectrum (AES) under RPM is introduced. This model determines the extent of the time-domain spread during PC and quantifies the reduction in PC energy compared with an unmodulated case. Second, from the time-domain analysis, a mapping relationship between the PC output amplitude and the RPM is established. It is found that the statistical properties of the modulus of the sum of the modulation sequence determine the magnitude of the matched filter output. On this basis, the analytical expressions for the average amplitude loss ratio (ALR) for PC output of the target for both 1-bit and 2-bit RPM cases are derived. In addition, we further consider the potential existence of insufficient phase shift conditions in practical time modulation metasurface (TMM) applications and analyze their quantitative impact on AES and ALR. Finally, the effectiveness of the proposed models is validated through simulation and measured experiments.
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (8) , 5443-5456
Theoretical Analysis of Random Phase Modulation Effects on Radar Pulse Compression by the Time-Modulated Metasurface
Metasurfaces can degrade radar pulse compression (PC) performance by encoding radar echoes with time-domain random phase modulation (RPM), which alters the correlation between the echo signal and the reference signal. Analyzing the quantitative impact of metasurface RPM on radar PC is crucial for designing encoding strategies and modulation suppression. However, due to the random nature of encoding, quantitatively analyzing its impact on radar PC is challenging. To address this problem, a quantitative analysis of the impact of RPM on radar PC performance from a statistical perspective is conducted in this work. First, from the frequency-domain analysis, a theoretical model of the average energy spectrum (AES) under RPM is introduced. This model determines the extent of the time-domain spread during PC and quantifies the reduction in PC energy compared with an unmodulated case. Second, from the time-domain analysis, a mapping relationship between the PC output amplitude and the RPM is established. It is found that the statistical properties of the modulus of the sum of the modulation sequence determine the magnitude of the matched filter output. On this basis, the analytical expressions for the average amplitude loss ratio (ALR) for PC output of the target for both 1-bit and 2-bit RPM cases are derived. In addition, we further consider the potential existence of insufficient phase shift conditions in practical time modulation metasurface (TMM) applications and analyze their quantitative impact on AES and ALR. Finally, the effectiveness of the proposed models is validated through simulation and measured experiments.
- 20 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 61 (3) , 5755-5770
Effect of Periodic Phase Modulation on the Matched Filtering With Insufficient Phase-Shift Capability
Utilizing periodic phase modulation (PPM) can shift the echo spectrum, affecting matched filtering (MF) processing, leading to time delay shift or amplitude attenuation. The prior works on the impact of PPM on MF mainly consider an ideal phase modulation model, where the phase shift is considered to be sufficient. In practical applications, the phase shift capability achieved by physical devices for phase modulation is often insufficient due to factors such as hardware limitations, operating bandwidth, and cost constraints. To address this limitation, this paper investigates the quantitative impact of PPM on the MF under conditions of insufficient phase shift. Firstly, reflection coefficient models for PPM under insufficient phase shifts are established, considering 1-bit and 2-bit conditions. Furthermore, for commonly used radar waveforms such as linear frequency modulation (LFM) and phase-coded modulation (PCM), expressions for MF output results under different bit rates are derived, and a quantitative analysis of the time delay and amplitude attenuation compared with the unmodulated case is conducted. Finally, the correctness of the proposed theoretical model is validated through simulation and measured experiments.
- 20 December 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 61 (3) , 5755-5770
Effect of Periodic Phase Modulation on the Matched Filtering With Insufficient Phase-Shift Capability
Utilizing periodic phase modulation (PPM) can shift the echo spectrum, affecting matched filtering (MF) processing, leading to time delay shift or amplitude attenuation. The prior works on the impact of PPM on MF mainly consider an ideal phase modulation model, where the phase shift is considered to be sufficient. In practical applications, the phase shift capability achieved by physical devices for phase modulation is often insufficient due to factors such as hardware limitations, operating bandwidth, and cost constraints. To address this limitation, this paper investigates the quantitative impact of PPM on the MF under conditions of insufficient phase shift. Firstly, reflection coefficient models for PPM under insufficient phase shifts are established, considering 1-bit and 2-bit conditions. Furthermore, for commonly used radar waveforms such as linear frequency modulation (LFM) and phase-coded modulation (PCM), expressions for MF output results under different bit rates are derived, and a quantitative analysis of the time delay and amplitude attenuation compared with the unmodulated case is conducted. Finally, the correctness of the proposed theoretical model is validated through simulation and measured experiments.
- 23 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 60 (4) , 5467-5480
Adaptive IMM Smoothing Algorithms for Jumping Markov System With Mismatched Measurement Noise Covariance Matrix
In this article, the adaptive online state smoothing problem is studied for a Markov jump system where the measurement noise covariance matrix (MNCM) is unknown. To address this problem, two adaptive IMM online smoothing algorithms are proposed to jointly estimate the target state and the unknown MNCM. Specifically, the article quantitatively examines the impact of noise covariance matrix mismatch on state estimation and theoretically demonstrates that the joint posterior distribution of the target state and the MNCM cannot be analytically obtained using the original variational Bayesian (VB) approach. To overcome this limitation, an approximate VB method is introduced, which utilizes the approximated state distribution obtained through the moment-matching method to update the MNCM. In addition, the convergence criterion of the proposed adaptive smoothing algorithms is designed. Finally, the estimation consistency of MNCM is analyzed. A maneuvering target tracking simulation example is presented to evaluate the effectiveness and applicability of the proposed adaptive algorithms.
- 23 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 60 (4) , 5467-5480
Adaptive IMM Smoothing Algorithms for Jumping Markov System With Mismatched Measurement Noise Covariance Matrix
In this article, the adaptive online state smoothing problem is studied for a Markov jump system where the measurement noise covariance matrix (MNCM) is unknown. To address this problem, two adaptive IMM online smoothing algorithms are proposed to jointly estimate the target state and the unknown MNCM. Specifically, the article quantitatively examines the impact of noise covariance matrix mismatch on state estimation and theoretically demonstrates that the joint posterior distribution of the target state and the MNCM cannot be analytically obtained using the original variational Bayesian (VB) approach. To overcome this limitation, an approximate VB method is introduced, which utilizes the approximated state distribution obtained through the moment-matching method to update the MNCM. In addition, the convergence criterion of the proposed adaptive smoothing algorithms is designed. Finally, the estimation consistency of MNCM is analyzed. A maneuvering target tracking simulation example is presented to evaluate the effectiveness and applicability of the proposed adaptive algorithms.
- Top Cited Papers
- 8 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-14
A Novel Approach for Radar Passive Jamming Based on Multiphase Coding Rapid Modulation
Electromagnetic controlled surface (ECS) which can regulate the amplitude and phase of electromagnetic wave reflection characteristics has attracted extensive attention in recent years because of its radar stealth effect by reducing the radar cross section (RCS). However, radar detection cannot be avoided only by stealth in the energy field gradually. It is a novel pulse Doppler radar jamming mode proposed in this paper to utilize the self-correlation of radar-transmitted waveforms to result in signal processing and radar detection failure through the rapid time-domain variation of phase coding ECS. In principle, phase modulation alters the intra-pulse characteristics of the original signal and fundamentally interferes with the processing of the radar signal. In this paper, random and periodic phase coding sequences are proposed according to different forms of radar jamming. And through the derivation formula and simulation experiment, the jamming effect under multi-phase modulation is verified. Among them, the target energy is dispersed to the surroundings to form a wide envelope through random coding modulation, which leads to noise barrage jamming. While we use periodic sequence coding modulation, the target is shifted in the range-Doppler domain, causing misplaced coherence on the radar echo and deceptive jamming to the radar. Moreover, the technology can also be widely used in synthetic aperture radar (SAR) imaging, microwave measurement and other remote sensing fields. To further confirm the accuracy and efficiency of the proposed method, multi-parameter contrast experiments and parameter sensitivity analyses are conducted.
- 8 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 61 (01962892) , 1-14
Top Cited PapersA Novel Approach for Radar Passive Jamming Based on Multiphase Coding Rapid Modulation
Electromagnetic controlled surface (ECS) which can regulate the amplitude and phase of electromagnetic wave reflection characteristics has attracted extensive attention in recent years because of its radar stealth effect by reducing the radar cross section (RCS). However, radar detection cannot be avoided only by stealth in the energy field gradually. It is a novel pulse Doppler radar jamming mode proposed in this paper to utilize the self-correlation of radar-transmitted waveforms to result in signal processing and radar detection failure through the rapid time-domain variation of phase coding ECS. In principle, phase modulation alters the intra-pulse characteristics of the original signal and fundamentally interferes with the processing of the radar signal. In this paper, random and periodic phase coding sequences are proposed according to different forms of radar jamming. And through the derivation formula and simulation experiment, the jamming effect under multi-phase modulation is verified. Among them, the target energy is dispersed to the surroundings to form a wide envelope through random coding modulation, which leads to noise barrage jamming. While we use periodic sequence coding modulation, the target is shifted in the range-Doppler domain, causing misplaced coherence on the radar echo and deceptive jamming to the radar. Moreover, the technology can also be widely used in synthetic aperture radar (SAR) imaging, microwave measurement and other remote sensing fields. To further confirm the accuracy and efficiency of the proposed method, multi-parameter contrast experiments and parameter sensitivity analyses are conducted.