Qin Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Qin Pan has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Hong Xu
Xidian University
8 shared publications - Yinghui Quan
Xidian University
8 shared publications - Heng Xu
School of Information Mechanics and Sensing Engineering, Xidian University, Xian, China
6 shared publications - Zhibin Chen
Xidian University
3 shared publications Naiwen Zhang
Hangzhou Research Institute, Xidian University, Hangzhou, China
2 shared publications- Xiaoyang Zhou
State Key Laboratory of Millimeter Waves, School of Information Science and Engineering, Southeast University, Nanjing, China
2 shared publications
Latest Publications
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-14
An ISAR Reconfigurable Shaping Method Utilizing Phase Modulation Metasurface
The coding scheme of the modulated phase is critical for ISAR jamming methods based on phase modulation meta-surface (PMM). Existing studies predominantly adopt periodic or random phase coding schemes, which yield relatively regular effects on ISAR imaging and are consequently susceptible to detection by radar systems. To this end, this paper proposes a feature-regulation method that relies on PMM to achieve ISAR reconfigurable shaping by designing modulation-phase encoding that reshapes the ISAR image of a PMM target into that of another target, thereby enabling customizable ISAR features for PMM and disrupting wideband radar recognition. Specifically, through theoretical derivation, the scattering point distribution of the shaped ISAR image is first characterized through the frequency spectrum distribution of the phase modulation sequence for PMM in the two-dimensional range–azimuth frequency domain. Subsequently, a weighted least-squares two-dimensional spectral approximation model under constant amplitude (CA) constraints is constructed to ensure that the frequency spectrum distribution of the modulation phase sequence closely matches the scattering point distribution of the shaped ISAR image, and this problem is effectively solved using a cyclic and gradient projection (GP) algorithm. Finally, simulations and experimental measurements are conducted to validate the effectiveness of the proposed method.
- 18 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 64 (01962892) , 1-14
An ISAR Reconfigurable Shaping Method Utilizing Phase Modulation Metasurface
The coding scheme of the modulated phase is critical for ISAR jamming methods based on phase modulation meta-surface (PMM). Existing studies predominantly adopt periodic or random phase coding schemes, which yield relatively regular effects on ISAR imaging and are consequently susceptible to detection by radar systems. To this end, this paper proposes a feature-regulation method that relies on PMM to achieve ISAR reconfigurable shaping by designing modulation-phase encoding that reshapes the ISAR image of a PMM target into that of another target, thereby enabling customizable ISAR features for PMM and disrupting wideband radar recognition. Specifically, through theoretical derivation, the scattering point distribution of the shaped ISAR image is first characterized through the frequency spectrum distribution of the phase modulation sequence for PMM in the two-dimensional range–azimuth frequency domain. Subsequently, a weighted least-squares two-dimensional spectral approximation model under constant amplitude (CA) constraints is constructed to ensure that the frequency spectrum distribution of the modulation phase sequence closely matches the scattering point distribution of the shaped ISAR image, and this problem is effectively solved using a cyclic and gradient projection (GP) algorithm. Finally, simulations and experimental measurements are conducted to validate the effectiveness of the proposed method.
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1870-1875
Quantized Joint-Phase Optimization Network for Time-Modulated Metasurface-Assisted Radar Deception Jamming
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Radar Systems
- Vol. 4, 1870-1875
Quantized Joint-Phase Optimization Network for Time-Modulated Metasurface-Assisted Radar Deception Jamming
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-16
Passive Barrage Jamming for SAR via Optimized Time-Domain Metasurface Modulation
Time-domain modulated metasurfaces (TMMs) enable passive radar jamming by dynamically altering incident waveforms. We introduce the concept of passive barrage jamming, where a TMM redistributes target energy to suppress dominant features in the synthetic aperture radar (SAR) imaging without active radiation. Traditional approaches, such as random phase modulation, can disperse target energy but lack a principle framework for shaping the SAR response, leaving detectable residual signatures. In this work, the design of TMM modulation sequences is formulated as a non-convex minimax optimization problem to improve the energy distribution of the SAR imaging. An alternating direction method of multipliers framework is developed to solve the problem efficiently under the constant-modulus constraint, with theoretical guarantees of monotonic convergence under suitable parameter settings. In SAR simulations, the optimized TMM sequences achieve a peak reduction of 70.18 dB for a point target and 48.29 dB for an extended target compared to the unmodulated baseline, outperforming both random and structured coding schemes. Experimental validation on a practical 1-bit TMM platform confirms a 12.87 dB peak reduction in one-dimensional matched filtering, despite phase quantization and hardware nonidealities. These results highlight the effectiveness of the proposed optimization approach in enhancing TMM-based barrage jamming performance, providing a robust and practical solution for radar countermeasures.
- 23 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 63 (01962892) , 1-16
Passive Barrage Jamming for SAR via Optimized Time-Domain Metasurface Modulation
Time-domain modulated metasurfaces (TMMs) enable passive radar jamming by dynamically altering incident waveforms. We introduce the concept of passive barrage jamming, where a TMM redistributes target energy to suppress dominant features in the synthetic aperture radar (SAR) imaging without active radiation. Traditional approaches, such as random phase modulation, can disperse target energy but lack a principle framework for shaping the SAR response, leaving detectable residual signatures. In this work, the design of TMM modulation sequences is formulated as a non-convex minimax optimization problem to improve the energy distribution of the SAR imaging. An alternating direction method of multipliers framework is developed to solve the problem efficiently under the constant-modulus constraint, with theoretical guarantees of monotonic convergence under suitable parameter settings. In SAR simulations, the optimized TMM sequences achieve a peak reduction of 70.18 dB for a point target and 48.29 dB for an extended target compared to the unmodulated baseline, outperforming both random and structured coding schemes. Experimental validation on a practical 1-bit TMM platform confirms a 12.87 dB peak reduction in one-dimensional matched filtering, despite phase quantization and hardware nonidealities. These results highlight the effectiveness of the proposed optimization approach in enhancing TMM-based barrage jamming performance, providing a robust and practical solution for radar countermeasures.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 8118-8135
Quantitative Analysis of Metasurface With Random Phase Modulation on Complex HRRP: A Statistical Perspective
Analyzing the influence of metasurface phase encoding on high-resolution range profile (HRRP) is essential for the design of modulation strategies and interference suppression. Periodic phase modulation (PPM) and random phase modulation (RPM), as the primary phase encoding methods of metasurfaces, have been extensively studied in recent years for their influence on HRRP. Compared to PPM, analyzing the influence of RPM on HRRP is challenging due to its inherent randomness. Existing research has primarily provided qualitative analyses of the influence of RPM on HRRP, without investigating the underlying quantitative relationships. In this article, the main approach is to analyze the quantitative influence of RPM on complex HRRP from a statistical perspective, examining its influence on the complex HRRP, the energy of the complex HRRP, and the autocorrelation between the energy of the complex HRRP. First, a joint probability density function (JPDF) is constructed with the real and imaginary parts of complex HRRP as random variables, and the quantitative relationship between the corresponding statistical parameters and modulation parameters is provided. Secondly, the expression for the average complex HRRP energy is derived, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Third, the expression for the autocorrelation function of the average complex HRRP energy is presented, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Finally, simulations and experiments are conducted to validate the conclusions provided.
- 24 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (10) , 8118-8135
Quantitative Analysis of Metasurface With Random Phase Modulation on Complex HRRP: A Statistical Perspective
Analyzing the influence of metasurface phase encoding on high-resolution range profile (HRRP) is essential for the design of modulation strategies and interference suppression. Periodic phase modulation (PPM) and random phase modulation (RPM), as the primary phase encoding methods of metasurfaces, have been extensively studied in recent years for their influence on HRRP. Compared to PPM, analyzing the influence of RPM on HRRP is challenging due to its inherent randomness. Existing research has primarily provided qualitative analyses of the influence of RPM on HRRP, without investigating the underlying quantitative relationships. In this article, the main approach is to analyze the quantitative influence of RPM on complex HRRP from a statistical perspective, examining its influence on the complex HRRP, the energy of the complex HRRP, and the autocorrelation between the energy of the complex HRRP. First, a joint probability density function (JPDF) is constructed with the real and imaginary parts of complex HRRP as random variables, and the quantitative relationship between the corresponding statistical parameters and modulation parameters is provided. Secondly, the expression for the average complex HRRP energy is derived, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Third, the expression for the autocorrelation function of the average complex HRRP energy is presented, which quantitatively relates it to the modulation pulse signal and the number of modulation segments. Finally, simulations and experiments are conducted to validate the conclusions provided.
- 13 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5993-6007
An Optimization-Based Deconvolution Approach for Recovering Time-Varying Phase Modulation Signal of Metasurface
Metasurfaces can alter radar echo characteristics by dynamically modulating the phase of incident electromagnetic waves, thereby degrading radar signal processing performance. Recovering the time-varying phase modulation signal of metasurfaces from radar echoes is crucial for understanding modulation patterns or suppressing modulation effects. To address this problem, we introduce an optimization-based deconvolution approach in this paper. Firstly, an optimization model for recovering phase modulation signals from metasurfaces is established by combining the least squares deconvolution principle, total variation of the modulating signal, and imaginary part constraint. Furthermore, a composite optimization approach (COA) to solve the deconvolution optimization problem is developed, in which the alternating minimization and alternating direction method of multipliers (ADMM) frameworks are integrated to estimate the complex propagation loss and the modulation phase sequence. In addition, the convergence and computational complexity analysis of the proposed COA is conducted. Finally, the effectiveness of the proposed method is validated through simulation and measured experiments.
- 13 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 5993-6007
An Optimization-Based Deconvolution Approach for Recovering Time-Varying Phase Modulation Signal of Metasurface
Metasurfaces can alter radar echo characteristics by dynamically modulating the phase of incident electromagnetic waves, thereby degrading radar signal processing performance. Recovering the time-varying phase modulation signal of metasurfaces from radar echoes is crucial for understanding modulation patterns or suppressing modulation effects. To address this problem, we introduce an optimization-based deconvolution approach in this paper. Firstly, an optimization model for recovering phase modulation signals from metasurfaces is established by combining the least squares deconvolution principle, total variation of the modulating signal, and imaginary part constraint. Furthermore, a composite optimization approach (COA) to solve the deconvolution optimization problem is developed, in which the alternating minimization and alternating direction method of multipliers (ADMM) frameworks are integrated to estimate the complex propagation loss and the modulation phase sequence. In addition, the convergence and computational complexity analysis of the proposed COA is conducted. Finally, the effectiveness of the proposed method is validated through simulation and measured experiments.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 61 (3) , 6657-6672
A Coherent Integration Method for Time-Varying Phase Modulation Target Based on a Short-Pulse MIMO Radar
The time-varying phase modulation (TVPM) of a target can impose dynamic phase changes on incident electromagnetic waves, altering radar echo characteristics. This phenomenon renders traditional radar coherent processing ineffective, leading to degraded radar signal processing performance. To address the challenge posed by random phase modulation introduced by TVPM, this work proposes a coherent integration method based on a short-pulse multiple-input multiple-output (MIMO) radar. Firstly, a short-pulse MIMO radar system based on dual-channel frequency diversity is designed. This system not only mitigates fasttime random phase modulation but also enhances the flexibility of phase compensation using multi-channel data. Furthermore, by integrating multi-channel information and considering the peak sidelobe ratio (PSLR) and integrated sidelobe ratio (ISLR) of the coherent integration output, a multi-channel slow-time domain joint phase compensation optimization model is proposed. Additionally, to address constraints in the fast-time domain, the paper introduces a fast-slow-time domain joint phase compensation optimization model. Given that these two optimization models involve discrete variables and multiple optimization objectives, the paper employs the non-dominated sorting genetic algorithm II (NSGA-II) to solve the optimization problems. Furthermore, considering the tendency of the NSGA-II to converge to local optima and the need for addressing multi-objective optimization, a compensation signalto-noise ratio (SNR) enhancement optimization model based on min-max optimization is introduced to improve the performance of the coherent integration. The alternating direction method of multipliers (ADMM) framework is employed to effectively solve this problem. Finally, the effectiveness of the proposed method is validated through simulation and practical experiments.
- 13 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 61 (3) , 6657-6672
A Coherent Integration Method for Time-Varying Phase Modulation Target Based on a Short-Pulse MIMO Radar
The time-varying phase modulation (TVPM) of a target can impose dynamic phase changes on incident electromagnetic waves, altering radar echo characteristics. This phenomenon renders traditional radar coherent processing ineffective, leading to degraded radar signal processing performance. To address the challenge posed by random phase modulation introduced by TVPM, this work proposes a coherent integration method based on a short-pulse multiple-input multiple-output (MIMO) radar. Firstly, a short-pulse MIMO radar system based on dual-channel frequency diversity is designed. This system not only mitigates fasttime random phase modulation but also enhances the flexibility of phase compensation using multi-channel data. Furthermore, by integrating multi-channel information and considering the peak sidelobe ratio (PSLR) and integrated sidelobe ratio (ISLR) of the coherent integration output, a multi-channel slow-time domain joint phase compensation optimization model is proposed. Additionally, to address constraints in the fast-time domain, the paper introduces a fast-slow-time domain joint phase compensation optimization model. Given that these two optimization models involve discrete variables and multiple optimization objectives, the paper employs the non-dominated sorting genetic algorithm II (NSGA-II) to solve the optimization problems. Furthermore, considering the tendency of the NSGA-II to converge to local optima and the need for addressing multi-objective optimization, a compensation signalto-noise ratio (SNR) enhancement optimization model based on min-max optimization is introduced to improve the performance of the coherent integration. The alternating direction method of multipliers (ADMM) framework is employed to effectively solve this problem. Finally, the effectiveness of the proposed method is validated through simulation and practical experiments.
- 23 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 60 (4) , 5467-5480
Adaptive IMM Smoothing Algorithms for Jumping Markov System With Mismatched Measurement Noise Covariance Matrix
In this article, the adaptive online state smoothing problem is studied for a Markov jump system where the measurement noise covariance matrix (MNCM) is unknown. To address this problem, two adaptive IMM online smoothing algorithms are proposed to jointly estimate the target state and the unknown MNCM. Specifically, the article quantitatively examines the impact of noise covariance matrix mismatch on state estimation and theoretically demonstrates that the joint posterior distribution of the target state and the MNCM cannot be analytically obtained using the original variational Bayesian (VB) approach. To overcome this limitation, an approximate VB method is introduced, which utilizes the approximated state distribution obtained through the moment-matching method to update the MNCM. In addition, the convergence criterion of the proposed adaptive smoothing algorithms is designed. Finally, the estimation consistency of MNCM is analyzed. A maneuvering target tracking simulation example is presented to evaluate the effectiveness and applicability of the proposed adaptive algorithms.
- 23 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 60 (4) , 5467-5480
Adaptive IMM Smoothing Algorithms for Jumping Markov System With Mismatched Measurement Noise Covariance Matrix
In this article, the adaptive online state smoothing problem is studied for a Markov jump system where the measurement noise covariance matrix (MNCM) is unknown. To address this problem, two adaptive IMM online smoothing algorithms are proposed to jointly estimate the target state and the unknown MNCM. Specifically, the article quantitatively examines the impact of noise covariance matrix mismatch on state estimation and theoretically demonstrates that the joint posterior distribution of the target state and the MNCM cannot be analytically obtained using the original variational Bayesian (VB) approach. To overcome this limitation, an approximate VB method is introduced, which utilizes the approximated state distribution obtained through the moment-matching method to update the MNCM. In addition, the convergence criterion of the proposed adaptive smoothing algorithms is designed. Finally, the estimation consistency of MNCM is analyzed. A maneuvering target tracking simulation example is presented to evaluate the effectiveness and applicability of the proposed adaptive algorithms.
- 14 April 2008
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Mass Damper Optimization Study to Reduce Seat Vibration
In order to remain competitive in the current challenging automotive industry, there is a great demand for a common design that can be used across different platforms. Such common design can not only lower the cost due to the high volume production, but also significantly reduces the design development time. However, how to meet different programs' unique requirements by the same design remains as a challenge. In the case of a seat design, it is important that the seat natural frequencies are separated from the full vehicle system's resonant frequencies to avoid the possible alignment causing the seat vibration issue. This paper describes a method of how to design a mass damper that not only separates the seat modes from the vehicle's specific resonant frequency range but also reduces the seat back vibration amplitude significantly. The response surface based optimization method is used to tune the elastic mass damper parameters to meet the program's specific requirements. The general characteristics of the system are given in terms of the trade-off curves between the seat frequencies and its vibration amplitudes in longitudinal and lateral directions. The final optimized damper has been verified at the vehicle system level. The real life application demonstrates the effectiveness of a mass damper in reducing the seat vibration amplitude.
- 14 April 2008
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Mass Damper Optimization Study to Reduce Seat Vibration
In order to remain competitive in the current challenging automotive industry, there is a great demand for a common design that can be used across different platforms. Such common design can not only lower the cost due to the high volume production, but also significantly reduces the design development time. However, how to meet different programs' unique requirements by the same design remains as a challenge. In the case of a seat design, it is important that the seat natural frequencies are separated from the full vehicle system's resonant frequencies to avoid the possible alignment causing the seat vibration issue. This paper describes a method of how to design a mass damper that not only separates the seat modes from the vehicle's specific resonant frequency range but also reduces the seat back vibration amplitude significantly. The response surface based optimization method is used to tune the elastic mass damper parameters to meet the program's specific requirements. The general characteristics of the system are given in terms of the trade-off curves between the seat frequencies and its vibration amplitudes in longitudinal and lateral directions. The final optimized damper has been verified at the vehicle system level. The real life application demonstrates the effectiveness of a mass damper in reducing the seat vibration amplitude.