SBSooji Bae

Sooji Bae

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sooji Bae has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Broadband Doherty-Like Load-Modulated Balanced Amplifier With an Optimized Impedance Transformation Ratio in InGaP/GaAs HBT Process for Handset Applications

    by Byeongcheol Yoon, Sooji Bae, Seungju Lee, Sungwoon Hwang, Jooyoung Jeon, Junghyun Kim

    This letter presents a design methodology for implementing broadband load-modulated balanced amplifier (LMBA) for handset applications. It is evaluated which architecture, Doherty-like LMBA (DL-LMBA) or pseudo-Doherty LMBA (PD-LMBA), is more suitable for InGaP/GaAs HBT power amplifier (PA). The impedance transformation ratio (ITR) is optimized through an analysis of correlation between the coupler impedance ( $Z_{0}$ ) and matching network (MN). A prototype LMBA attains measured saturation power ( $P_{\text {SAT}}$ ), collector efficiency (CE), and 6-dB output power back-off (OBO) CE of over 33.2 dBm, 45.2%, and 42.0%, respectively, in the range of 3.2–5.0 GHz. The LMBA is also evaluated by 5G NR FR1 100-MHz QPSK CP-OFDM with 9.5-dB peak-to-average power ratio (PAPR), achieving 26.6-dBm average output power ( $P_{\text {avg}}$ ) with 37.7% average CE (CEavg) at an adjacent channel leakage ratio (ACLR) of −33 dBc.


  • A 5.15–7.125-GHz Differential Power Amplifier With Enhanced Linearity of Average Power Region Using Dynamic Cross-Coupled Capacitor

    by Sungwoon Hwang, Jooyoung Jeon, Sooji Bae, Byeongcheol Yoon, Sungyoon Kang, Junghyun Kim

    This article presents a 5.15–7.125-GHz differential power amplifier (PA) with enhanced linear output power by dynamic cross-coupled capacitors ( $C_{\text{cc}}$ ) for both fifth-generation new radio-unlicensed (5G NR-U) and 802.11ax wireless local area network (WLAN) applications. The proposed dynamic $C_{\text{cc}}$ compensates for nonlinear parameters of transistors and leads to improved linearity in the average output power region. The multicoupled four-way transformer (TF) is also proposed for a high symmetry combining structure to reduce the imbalance of differential PA and for a 30% fractional bandwidth of optimal output matching with a low turn ratio and low insertion losses to implement on a nine-layer printed circuit board applications. The proposed differential PA is implemented in a 2- $\mu\text{m}$ InGaP/GaAs heterojunction bipolar transistor (HBT) process. The PA achieves a gain of 24 dB, a saturated output power of 33.1 dBm, and a power added efficiency (PAE) of 40.4% with a collector voltage of 5.5 V over 5.15–7.125 GHz under a continuous wave (CW) signal. The linearity of the proposed PA is further evaluated with various modulation signal schemes to validate its suitability for NR-U and WLAN applications. The PA with NR 100-MHz cyclic prefix (CP) and discrete Fourier transform (DFT) signal having a peak-to-average power ratio (PAPR) of 11.4 and 8 dB achieves linear output power meeting $-$ 33 dBc of 24.6 and 27 dBm and PAE of 10% and 16.3% in NR evolved universal terrestrial radio access (E-UTRA) adjacent channel leakage ratio (ACLR) condition. The PA also achieves the output power of 19.8 dBm with a PAE of 4.3% (error vector magnitude (EVM) $=$ $-$ 40 dB) under 802.11ax MCS11 80 MHz having a PAPR of 10.7 dB.


  • Improved Linearity and Efficiency of 5-GHz HBT Power Amplifier Using Transformer-Based Second Harmonic Trap Network

    by Sungwoon Hwang, Jooyoung Jeon, Sooji Bae, Byeongcheol Yoon, Euijin Seo, Sungyoon Kang, Junghyun Kim

    This letter presents an improved linear and efficient heterojunction bipolar transistor (HBT) power amplifier (PA) for mobile applications using a newly proposed transformer (TF)-based second harmonic trap that only terminates the second harmonic, without affecting the fundamental frequency. Compared to the configuration without the second harmonic trap, the PA with the proposed second harmonic trap has improved linearity, gain, and PAE. The PA is implemented in a 2- ${\mu }{\text{m}}$ InGaP/GaAs HBT process, and the input and output TFs are built on a nine-layer printed circuit board. The fabricated PA achieves a small-signal gain of 23.3 dB, saturated output power of 33.5 dBm, and peak PAE of 45.9% at a collector voltage of 4.5 V over 5.15–5.925 GHz under continuous-wave signal. A new radio (NR) 100-MHz QPSK CP 273 RB signal with a peak-to-average power ratio (PAPR) of 10.7 dB is used to test linearity. The PA achieves improved efficiency from 5.8%–9% to 6.4%–11.5% in the linear output power region which meeting adjacent channel leakage ratio (ACLR) of $-$ 33 dBc.


  • Switchless Dual-Power-Mode Fully Differential HBT Power Amplifier for Mobile Applications

    by Sungwoon Hwang, Jooyoung Jeon, Sooji Bae, Byeongcheol Yoon, Sungyoon Kang, Junghyun Kim

    This study proposes a switchless dual-power-mode (DPM) power amplifier (PA), which operates independently in high-powermode (HPM) and low-power mode (LPM) to improve the efficiency. The DPM PA optimizes the output impedances using bias control of the PA and the proposed bidirectional output matching structure with a transformer (TF) for each power mode with no switches for isolation between the LPM and the HPM with high passive efficiency. The proposed output structure realizes a high impedance in the nonoperating mode network to ensure that the operating mode network realizes the optimal impedance by utilizing bidirectional matching of the off characteristics of transistors and TF output for each mode. The differential DPM PA is implemented using a 2- $\mu \mathrm{m}$ InGaP/GaAs heterojunction bipolar transistor (HBT) process on a nine-layer printed circuit board with low insertion loss to demonstrate the proposed structure. The HPM and LPM, operating independently, achieved the gains of 24–25.5 and 11.4–12.9 dB and the saturated output power of 34.2–34.8 and 23.2–23.5 dBm, with a peak power-added efficiency (PAE) of 44.4%–49% and 32%–34.4%, respectively, under a continuous-wave (CW) signal test of over 5.15–5.925 GHz. The proposed PA error vector magnitude (EVM) is tested with 160 MHz of a 64-quadrature amplitude modulator (QAM) signal and achieves the average output powers of 24.5 and 14 dBm (EVM $=$ $ -$ 32 dB) and a PAE of 10.5% and 10.1% for HPM and LPM with digital predistortion, respectively.


  • Open Access

    A 2.4 GHz 20 W 8-Channel RF Source Module with Improved Channel Output Balance

    by Hyosung Nam, Taewan Kim, Taejoo Sim, Sooji Bae, Junghyun Kim

    This paper presents a 2.4 GHz 20 W 8-channel radio frequency (RF) source module with improved channel output balance. The proposed RF source module is composed of an RF source generation/DC control part, a power amplification part, and a power dividing part. A 2-stage power amplifier (PA) is combined with gallium nitride high-electron-mobility transistors, including a 25 W transistor and 2-way combined 120 W transistors as the drive and main PA, respectively. In addition, a structure was applied to improve the channel output balance compared to that of the previous module, and the differences of the phase and magnitude of the output power between channels are alleviated within 0.35° and 0.18 dB, respectively. A water jacket was implemented under the drive and main PAs for liquid cooling; however, unlike in the previous work, it was designed by optimizing the size of the water jacket and reducing unnecessary materials using a brazing process. The output power at each channel was 43 dBm, and the drain efficiency was more than 50% at 2.4 GHz. The total module size was 244 mm × 247.4 mm × 30 mm, and its volume was reduced by approximately 58.4% compared to that of the previous module.