Xiaoxia Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaoxia Wang has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Tao Ouyang
Xiangtan University
8 shared publications - Jin Li
Hunan Key Laboratory of Micro-Nano Energy Materials and Devices, Xiangtan University, Hunan 411105, People's Republic of China
5 shared publications Zhunyun Tang
School of Physics and Optoelectronics, Xiangtan University , Xiangtan 411105, Hunan
5 shared publicationsChao Tang
Xiangtan University
4 shared publications- Chao Tang
School of Physics and Optoelectronics, Xiangtan University 1 , Hunan 411105
3 shared publications - Chaoyu He
School of Physics and Optoelectronics, Xiangtan University, Xiangtan 411105, China
3 shared publications
Latest Publications
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
Polarization-dependent thermal transport in 2D multiferroic InCrX3 (X = S, Se)
Regulating the intrinsic thermal transport properties of conventional monolayer ferroelectric materials by flipping the polarization orientation is a key scientific challenge due to their adherence to Neumann's principle. Introducing Cr atoms into monolayer In2X3 (X = S, Se) forms stable multiferroic InCrX3 structures. Moreover, the introduction of Cr atoms enables a drastic reconstruction of the local coordination environment upon polarization reversal, thereby potentially altering the phonon dispersion and scattering phase space in a manner that is not constrained by the higher symmetry of the pristine lattice. First-principles calculations reveal that the polarization orientation could affect the phonon thermal transport properties of InCrX3 significantly. For the polarization-up state, the coupling between acoustic and optical phonon branches becomes more pronounced in InCrX3, enhancing phonon anharmonicity in the low-frequency region. Meanwhile, numerous phonon quasi-flat bands appear in InCrX3 with polarization-up state as well, which give rise to lower group velocity and broaden anharmonic scattering channels. Therefore, the lattice thermal conductivity of InCrX3 in the polarization-up state is one order of magnitude lower than that in the polarization-down state. Given the semimetallic characteristics of the polarization-up state, the electronic thermal conductivity is further calculated. After incorporating electronic thermal conductivity, the total thermal conductivity still exhibits observable variation between the two polarization states. These findings uncover an electric-field-controllable heat transfer mechanism and provide a promising strategy for designing smart thermal management devices based on extreme two-dimensional monolayer multiferroic materials.
- 14 September 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 129 (11)
Polarization-dependent thermal transport in 2D multiferroic InCrX3 (X = S, Se)
Regulating the intrinsic thermal transport properties of conventional monolayer ferroelectric materials by flipping the polarization orientation is a key scientific challenge due to their adherence to Neumann's principle. Introducing Cr atoms into monolayer In2X3 (X = S, Se) forms stable multiferroic InCrX3 structures. Moreover, the introduction of Cr atoms enables a drastic reconstruction of the local coordination environment upon polarization reversal, thereby potentially altering the phonon dispersion and scattering phase space in a manner that is not constrained by the higher symmetry of the pristine lattice. First-principles calculations reveal that the polarization orientation could affect the phonon thermal transport properties of InCrX3 significantly. For the polarization-up state, the coupling between acoustic and optical phonon branches becomes more pronounced in InCrX3, enhancing phonon anharmonicity in the low-frequency region. Meanwhile, numerous phonon quasi-flat bands appear in InCrX3 with polarization-up state as well, which give rise to lower group velocity and broaden anharmonic scattering channels. Therefore, the lattice thermal conductivity of InCrX3 in the polarization-up state is one order of magnitude lower than that in the polarization-down state. Given the semimetallic characteristics of the polarization-up state, the electronic thermal conductivity is further calculated. After incorporating electronic thermal conductivity, the total thermal conductivity still exhibits observable variation between the two polarization states. These findings uncover an electric-field-controllable heat transfer mechanism and provide a promising strategy for designing smart thermal management devices based on extreme two-dimensional monolayer multiferroic materials.
- 29 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (26)
Combined modulation of electrical and thermal transport properties in diamond (100) surfaces via reconstruction and passivation
The intrinsic metallicity of diamond (100) surfaces, arising from unsaturated dangling bonds, remains a critical bottleneck for their integration into high-performance electronic devices. Here, we conduct a systematic first-principles investigation into the modulation of electronic and thermal properties via surface reconstruction and chemical passivation, complemented by homogeneous nonequilibrium molecular dynamics simulations. Our results demonstrate that surface reconstruction via dangling-bond saturation drives a transition from metallic to semiconducting characteristics, with the 2 × 1 reconstruction exhibiting the lowest surface energy (0.294 eV/Å2) and optimal stability. Furthermore, the introduction of functional groups (–F, –H, –O, –OH, and –NH2) enables precise modulation of the band structure and work function of the diamond (100) surface. Among the investigated functional groups, the H-terminated surface stands out as the optimal configuration, achieving a high acoustic-phonon-limited hole mobility (∼2.09 × 104 cm2 V−1 s−1) while maintaining a remarkable thermal conductivity of 726.2 W m−1 K−1. Our findings provide critical theoretical guidance for the development of high-performance diamond-based power electronics and thermal management systems.
- 29 June 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (26)
Combined modulation of electrical and thermal transport properties in diamond (100) surfaces via reconstruction and passivation
The intrinsic metallicity of diamond (100) surfaces, arising from unsaturated dangling bonds, remains a critical bottleneck for their integration into high-performance electronic devices. Here, we conduct a systematic first-principles investigation into the modulation of electronic and thermal properties via surface reconstruction and chemical passivation, complemented by homogeneous nonequilibrium molecular dynamics simulations. Our results demonstrate that surface reconstruction via dangling-bond saturation drives a transition from metallic to semiconducting characteristics, with the 2 × 1 reconstruction exhibiting the lowest surface energy (0.294 eV/Å2) and optimal stability. Furthermore, the introduction of functional groups (–F, –H, –O, –OH, and –NH2) enables precise modulation of the band structure and work function of the diamond (100) surface. Among the investigated functional groups, the H-terminated surface stands out as the optimal configuration, achieving a high acoustic-phonon-limited hole mobility (∼2.09 × 104 cm2 V−1 s−1) while maintaining a remarkable thermal conductivity of 726.2 W m−1 K−1. Our findings provide critical theoretical guidance for the development of high-performance diamond-based power electronics and thermal management systems.
- 11 May 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (19)
Electron localization in Janus structure enhances phonon thermal transport in M2C (M = V, Nb, Ta) MXene
Despite Janus materials showing great potential for thermal conductivity tuning, the mechanisms remain poorly understood, as structural asymmetry challenges conventional symmetric theories. Here, we investigate thermal transport in monolayer M2C (M = V, Nb, Ta) MXenes and Janus MʹVC (Mʹ = Nb, Ta), revealing how electron localization enhances phonon thermal transport in Janus structures. In the M2C series, Nb2C has slightly lower thermal conductivity (κ) than V2C, while Ta2C shows an anomalous increase. However, Janus NbVC and TaVC exhibit far higher κ than pristine MXenes. Electronic analysis shows Ta/Nb d-orbital localization lies between C and V. Electron repulsion around Ta strengthens atomic restoring forces, weakening phonon anharmonicity. V delocalization in Janus structures further enhances this effect, prolonging phonon relaxation times and boosting κ. This enhancement originates from reduced phonon anharmonicity regulated by electron localization through interatomic interactions. This work provides theoretical support for the application of Janus MʹVC in thermal management.
- 11 May 2026
- Published by AIP Publishing in Applied Physics Letters
- Vol. 128 (19)
Electron localization in Janus structure enhances phonon thermal transport in M2C (M = V, Nb, Ta) MXene
Despite Janus materials showing great potential for thermal conductivity tuning, the mechanisms remain poorly understood, as structural asymmetry challenges conventional symmetric theories. Here, we investigate thermal transport in monolayer M2C (M = V, Nb, Ta) MXenes and Janus MʹVC (Mʹ = Nb, Ta), revealing how electron localization enhances phonon thermal transport in Janus structures. In the M2C series, Nb2C has slightly lower thermal conductivity (κ) than V2C, while Ta2C shows an anomalous increase. However, Janus NbVC and TaVC exhibit far higher κ than pristine MXenes. Electronic analysis shows Ta/Nb d-orbital localization lies between C and V. Electron repulsion around Ta strengthens atomic restoring forces, weakening phonon anharmonicity. V delocalization in Janus structures further enhances this effect, prolonging phonon relaxation times and boosting κ. This enhancement originates from reduced phonon anharmonicity regulated by electron localization through interatomic interactions. This work provides theoretical support for the application of Janus MʹVC in thermal management.
- 17 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (20)
The thermal transport properties of monolayer BiOsO3: The role of spin–orbit coupling and magnetic anisotropy
Thermal transport in magnetic materials has attracted tremendous attention due to its importance in spintronics and thermal management. However, existing calculations of thermal conductivity of magnetic materials often simplify the complex non-collinear spin structures and realistic magnetic moment orientations by assuming collinear spin structures with spins aligned along the z-axis. To evaluate the reliability of such simplification, by means of machine learning potentials (MLPs) combined with the Boltzmann transport equation (BTE), we systematically investigate the thermal transport properties of monolayer BiOsO3, a ferromagnetic semiconductor with strong spin–orbit coupling (SOC) and large magnetic anisotropy (MA). The calculations show that SOC effect could significantly enhance the lattice thermal conductivity (2.83 W/mK) by a factor of approximately 2.2 compared to the case without SOC (1.29 W/mK). This obvious enhancement mainly originates from the fact that the introduction of SOC drives charge redistribution toward the inner Os–O bond network, thereby enhancing the symmetry of internal potential wells and suppressing phonon anharmonicity. Such behavior indicates that the previous simplified collinear approaches are insufficient to accurately describe the thermal transport in magnetic materials with strong SOC. In contrast, BiOsO3 exhibits a large magnetic anisotropy energy (MAE=−5.7 meV/Os). However, the orientation of spin easy axis hosts a weak influence on the thermal conductivity. These findings shed light on the thermal conductivity of BiOsO3, and could also provide meaningful guidance for studying thermal transport in magnetic materials.
- 17 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (20)
The thermal transport properties of monolayer BiOsO3: The role of spin–orbit coupling and magnetic anisotropy
Thermal transport in magnetic materials has attracted tremendous attention due to its importance in spintronics and thermal management. However, existing calculations of thermal conductivity of magnetic materials often simplify the complex non-collinear spin structures and realistic magnetic moment orientations by assuming collinear spin structures with spins aligned along the z-axis. To evaluate the reliability of such simplification, by means of machine learning potentials (MLPs) combined with the Boltzmann transport equation (BTE), we systematically investigate the thermal transport properties of monolayer BiOsO3, a ferromagnetic semiconductor with strong spin–orbit coupling (SOC) and large magnetic anisotropy (MA). The calculations show that SOC effect could significantly enhance the lattice thermal conductivity (2.83 W/mK) by a factor of approximately 2.2 compared to the case without SOC (1.29 W/mK). This obvious enhancement mainly originates from the fact that the introduction of SOC drives charge redistribution toward the inner Os–O bond network, thereby enhancing the symmetry of internal potential wells and suppressing phonon anharmonicity. Such behavior indicates that the previous simplified collinear approaches are insufficient to accurately describe the thermal transport in magnetic materials with strong SOC. In contrast, BiOsO3 exhibits a large magnetic anisotropy energy (MAE=−5.7 meV/Os). However, the orientation of spin easy axis hosts a weak influence on the thermal conductivity. These findings shed light on the thermal conductivity of BiOsO3, and could also provide meaningful guidance for studying thermal transport in magnetic materials.
- Open Access
- 17 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (19)
Notable impact of magnetic order and flat phonon mode on the thermal transport properties of 2D magnetic semiconductor CrSBr
Monolayer CrSBr, an air-stable magnetic semiconductor, hosts great potential applications in spintronics, optoelectronics, and magnetic imaging. A deep understanding of its thermal transport behavior, particularly the influence of magnetic order, is essential for revealing the microscopic mechanisms of spin–phonon interactions in two-dimensional magnets. In this study, we systematically investigate the effect of magnetic order on the thermal transport properties of monolayer CrSBr by using machine learning potentials combined with the Boltzmann transport equation. The calculations show that the magnetic order significantly affects the thermal conductivity of monolayer CrSBr. Around the Curie temperature (145 K), the thermal conductivity along the x-axis is 80.79, 89.63, and 58.91 W/mK for ferromagnetic, antiferromagnetic type I, and antiferromagnetic type II phases, respectively. Along the y-axis, the corresponding values are 37.38, 45.77, and 19.20 W/mK. Such substantial variation mainly arises from differences in phonon lifetimes attributable to the distinct anharmonic effects present in CrSBr, influenced by its magnetic order. Meanwhile, it is found that the specific flat phonon modes in monolayer CrSBr could induce strong four-phonon scattering rates. As a result, the lattice thermal conductivity is reduced by up to 36.7% compared to the case where only three-phonon scattering is considered. These findings not only emphasize the critical role of magnetic order and flat phonon modes in governing the thermal transport behavior of monolayer CrSBr but also provide important guidelines for designing thermal management strategies via magnetic order.
- 17 November 2025
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 138 (19)
Open AccessNotable impact of magnetic order and flat phonon mode on the thermal transport properties of 2D magnetic semiconductor CrSBr
Monolayer CrSBr, an air-stable magnetic semiconductor, hosts great potential applications in spintronics, optoelectronics, and magnetic imaging. A deep understanding of its thermal transport behavior, particularly the influence of magnetic order, is essential for revealing the microscopic mechanisms of spin–phonon interactions in two-dimensional magnets. In this study, we systematically investigate the effect of magnetic order on the thermal transport properties of monolayer CrSBr by using machine learning potentials combined with the Boltzmann transport equation. The calculations show that the magnetic order significantly affects the thermal conductivity of monolayer CrSBr. Around the Curie temperature (145 K), the thermal conductivity along the x-axis is 80.79, 89.63, and 58.91 W/mK for ferromagnetic, antiferromagnetic type I, and antiferromagnetic type II phases, respectively. Along the y-axis, the corresponding values are 37.38, 45.77, and 19.20 W/mK. Such substantial variation mainly arises from differences in phonon lifetimes attributable to the distinct anharmonic effects present in CrSBr, influenced by its magnetic order. Meanwhile, it is found that the specific flat phonon modes in monolayer CrSBr could induce strong four-phonon scattering rates. As a result, the lattice thermal conductivity is reduced by up to 36.7% compared to the case where only three-phonon scattering is considered. These findings not only emphasize the critical role of magnetic order and flat phonon modes in governing the thermal transport behavior of monolayer CrSBr but also provide important guidelines for designing thermal management strategies via magnetic order.
- 27 March 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (10)
Polarization flip induced phonon branch decoupling and significant suppression of thermal transport behavior in- 27 March 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 111 (10)
Polarization flip induced phonon branch decoupling and significant suppression of thermal transport behavior in- 18 March 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (15) , 7858-7865
Super strain enhanced thermal conductivity of monolayer aluminum/gallium nitride (AlxGa1−xN) alloys
The AlxGa1−xN alloys play a crucial role as buffer layers in next-generation power electronic devices, where thermal transport is of great significance to performance stability and reliability. Typically, the AlxGa1−xN alloys are often subjected to stress, stemming from various factors such as material preparation processes, temperature fluctuations during device operation, and external mechanical forces. Nevertheless, how to regulate stress and the impact of stress on the thermal transport properties of AlxGa1−xN alloys remain unclear. In this paper, based on state-of-the-art first-principles calculations, we investigate the strain-regulated thermal transport properties of the monolayer AlxGa1−xN alloys. Under tensile strain, the thermal conductivity of AlxGa1−xN first increases and then decreases with increasing strain, presenting a non-monotonic behavior. The most significant enhancement of the thermal conductivity emerges in Al0.5Ga0.5N, where more than 20 times the pristine value is achieved at 10% strain. The fundamental mechanism underlying this anomalous response to strain of the thermal conductivity is traced back to the presence of lone pair electrons around the nitrogen atoms in AlxGa1−xN. The interactions between the lone pair of electrons and the bonding electrons decrease with increasing strain, which gives rise to weakened phonon anharmonicity and super enhanced thermal conductivity. The findings revealed in this study indicate future directions for the efficient regulation of the thermal conductivity of advanced thermal functional materials and high-performance thermal management in electronics.
- 18 March 2025
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (15) , 7858-7865
Super strain enhanced thermal conductivity of monolayer aluminum/gallium nitride (AlxGa1−xN) alloys
The AlxGa1−xN alloys play a crucial role as buffer layers in next-generation power electronic devices, where thermal transport is of great significance to performance stability and reliability. Typically, the AlxGa1−xN alloys are often subjected to stress, stemming from various factors such as material preparation processes, temperature fluctuations during device operation, and external mechanical forces. Nevertheless, how to regulate stress and the impact of stress on the thermal transport properties of AlxGa1−xN alloys remain unclear. In this paper, based on state-of-the-art first-principles calculations, we investigate the strain-regulated thermal transport properties of the monolayer AlxGa1−xN alloys. Under tensile strain, the thermal conductivity of AlxGa1−xN first increases and then decreases with increasing strain, presenting a non-monotonic behavior. The most significant enhancement of the thermal conductivity emerges in Al0.5Ga0.5N, where more than 20 times the pristine value is achieved at 10% strain. The fundamental mechanism underlying this anomalous response to strain of the thermal conductivity is traced back to the presence of lone pair electrons around the nitrogen atoms in AlxGa1−xN. The interactions between the lone pair of electrons and the bonding electrons decrease with increasing strain, which gives rise to weakened phonon anharmonicity and super enhanced thermal conductivity. The findings revealed in this study indicate future directions for the efficient regulation of the thermal conductivity of advanced thermal functional materials and high-performance thermal management in electronics.
- 12 February 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (8) , 7010-7019
Alloying enhanced negative Poisson's ratio in two-dimensional aluminum gallium nitride (Al x Ga 1− x N)
Based on first-principles calculations, we systematically study the NPR in two-dimensional (2D) GaN and AlN, and their alloy of Al x Ga 1− x N. Intriguingly, the NPR in Al x Ga 1− x N is significantly enhanced compared to the parent materials of GaN and AlN.
- 12 February 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 26 (8) , 7010-7019
Alloying enhanced negative Poisson's ratio in two-dimensional aluminum gallium nitride (Al x Ga 1− x N)
Based on first-principles calculations, we systematically study the NPR in two-dimensional (2D) GaN and AlN, and their alloy of Al x Ga 1− x N. Intriguingly, the NPR in Al x Ga 1− x N is significantly enhanced compared to the parent materials of GaN and AlN.
- 13 February 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (17) , 175704
Ultra-high thermal conductivity of two-dimensional C23
High thermal conductivity is of great interest due to the novel applications in high-performance heat dissipation for microelectronic devices. Two-dimensional (2D) materials with graphene as a representative have attracted tremendous interest due to the excellent properties, where C23 is an emerging 2D allotrope of carbon with a large bandgap. In this paper, by solving the Boltzmann transport equation based on state-of-the-art first-principles calculations, the C23 is predicted to have an ultrahigh thermal conductivity of 2051.47 Wm−1K−1, which is on the same order of magnitude as graphene. Based on the comparative analysis among C23, graphene, and penta-graphene, it is shown that the unique spatial structure and the orbital hybridization of C23 lead to weak anharmonicity, which results in the large relaxation time of phonons and finally results in ultrahigh thermal conductivity. Our study is expected to promote the comprehensive understanding of thermal transport in C23 and shed light on future exploration of novel materials with high thermal conductivity.
- 13 February 2023
- Published by IOP Publishing in Nanotechnology
- Vol. 34 (17) , 175704
Ultra-high thermal conductivity of two-dimensional C23
High thermal conductivity is of great interest due to the novel applications in high-performance heat dissipation for microelectronic devices. Two-dimensional (2D) materials with graphene as a representative have attracted tremendous interest due to the excellent properties, where C23 is an emerging 2D allotrope of carbon with a large bandgap. In this paper, by solving the Boltzmann transport equation based on state-of-the-art first-principles calculations, the C23 is predicted to have an ultrahigh thermal conductivity of 2051.47 Wm−1K−1, which is on the same order of magnitude as graphene. Based on the comparative analysis among C23, graphene, and penta-graphene, it is shown that the unique spatial structure and the orbital hybridization of C23 lead to weak anharmonicity, which results in the large relaxation time of phonons and finally results in ultrahigh thermal conductivity. Our study is expected to promote the comprehensive understanding of thermal transport in C23 and shed light on future exploration of novel materials with high thermal conductivity.