Oksana Smirnova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Oksana Smirnova has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Knebel
Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Jena, Germany
6 shared publications - Lothar Wondraczek
Otto Schott Institute of Materials Research University of Jena Jena Germany
5 shared publications - Roman Sajzew
Friedrich Schiller University Jena
4 shared publications - Ayisha Komal
Friedrich Schiller University Jena
3 shared publications - Aaron Reupert
Otto Schott Institute of Materials Research (OSIM) Friedrich Schiller University Jena Jena Germany
2 shared publications - Alexis Duval
Otto Schott Institute of Materials Research Friedrich Schiller University Jena Jena Germany
2 shared publications
Latest Publications
- Open Access
- 7 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Ångstrom Scale Pore Engineering in ZIF-62 Glasses by in vacuo Heating-Induced Amorphization
Zeolitic Imidazolate Framework (ZIFs) glasses possess both the intrinsic porosity of Metal–Organic Frameworks (MOFs) and the melt-processability of conventional glasses, thereby representing a new class of porous materials that has already demonstrated established promise across a range of applications. However, unlike the high pore tunability in crystalline MOFs, pore engineering in MOF glasses is challenging due to pore collapse during melting and the overall amorphous structure. Therefore, developing a versatile strategy to tune pores in MOF glasses is of critical importance. This work demonstrates that vacuum-assisted heating allows Ångstrom-scale pore engineering in ZIF-62 glasses. The negative pressure dependence on ZIF-62 glass formation and porosity was systematically investigated by going from ambient pressure to high vacuum (HV, 1×10−10 bar) for heating of ZIF-62. A clear correlation between vacuum strength and final glass pore size is observed. High-Resolution Transmission Electron Microscopy (HRTEM) showed significantly larger porosity in ZIF-62 glasses formed under higher vacuum conditions, further supported by CO2 gas sorption showing an increase in CO2 uptake capacity from 0.29 mmol·g-1 for ZIF-62 to 0.94 mmol·g-1 for agZIF-62HV. Comprehensive characterization (XRD, ED, XPS, IR, Raman, DSC, TGA) confirms the preservation of the chemical environment, and gas sorption reveals changes to the porosity structure. These findings, combined with the unprecedented colorless nature of the resulting glasses, highlight the potential of negative pressure as a parameter to tune the microstructure and porosity in hybrid glasses, which in turn further advances the applicability of these materials in fields where precise structural control is of critical importance, such as catalysis, separation or capture processes, and advanced optics.
- 7 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessÅngstrom Scale Pore Engineering in ZIF-62 Glasses by in vacuo Heating-Induced Amorphization
Zeolitic Imidazolate Framework (ZIFs) glasses possess both the intrinsic porosity of Metal–Organic Frameworks (MOFs) and the melt-processability of conventional glasses, thereby representing a new class of porous materials that has already demonstrated established promise across a range of applications. However, unlike the high pore tunability in crystalline MOFs, pore engineering in MOF glasses is challenging due to pore collapse during melting and the overall amorphous structure. Therefore, developing a versatile strategy to tune pores in MOF glasses is of critical importance. This work demonstrates that vacuum-assisted heating allows Ångstrom-scale pore engineering in ZIF-62 glasses. The negative pressure dependence on ZIF-62 glass formation and porosity was systematically investigated by going from ambient pressure to high vacuum (HV, 1×10−10 bar) for heating of ZIF-62. A clear correlation between vacuum strength and final glass pore size is observed. High-Resolution Transmission Electron Microscopy (HRTEM) showed significantly larger porosity in ZIF-62 glasses formed under higher vacuum conditions, further supported by CO2 gas sorption showing an increase in CO2 uptake capacity from 0.29 mmol·g-1 for ZIF-62 to 0.94 mmol·g-1 for agZIF-62HV. Comprehensive characterization (XRD, ED, XPS, IR, Raman, DSC, TGA) confirms the preservation of the chemical environment, and gas sorption reveals changes to the porosity structure. These findings, combined with the unprecedented colorless nature of the resulting glasses, highlight the potential of negative pressure as a parameter to tune the microstructure and porosity in hybrid glasses, which in turn further advances the applicability of these materials in fields where precise structural control is of critical importance, such as catalysis, separation or capture processes, and advanced optics.
- Open Access
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Unlocking Large-Area Free-Standing MOF-Glasses for Molecular Sieving Gas Separation Membranes
Membranes prepared of MOF glasses holds significant promise for gas separations due to the absence of grain boundary diffusion, liquid processibility, and tunability. However, the inherent high viscosity of MOF melts renders them prone to cracking upon rapid cooling and further handling, and their propensity to densify at high temperatures and long time in molten state severely limits their upscaling possibilities. Here, we present a solution to overcome these limitations and demonstrate that - by selecting suitable materials particularly fitting thermal and mechanical behavior to those of MOF-glass – it is possible to process large, crack-free MOF-glass sheets. By carefully optimizing each step of the process – from melting to performance testing – we successfully fabricate a crack-free, self-supported ZIF-62 glass membrane from pristine ZIF-62 crystals. The microstructure is investigated using microscopy as well as SEM-EDX analysis, confirming homogeneous boundary-free MOF-glass, while gas permeation experiments are carried out to prove the applicability of MOF-glass as gas separation membrane. The membrane exhibits exceptionally sharp methane molecular sieving cut-off with such low permeability that gas chromatography is unable to detect CH4. We conclude this work by giving a brief outlook of the remaining challenges and perspectives for MOF glasses in a view of gas separation membranes.
- 10 June 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessUnlocking Large-Area Free-Standing MOF-Glasses for Molecular Sieving Gas Separation Membranes
Membranes prepared of MOF glasses holds significant promise for gas separations due to the absence of grain boundary diffusion, liquid processibility, and tunability. However, the inherent high viscosity of MOF melts renders them prone to cracking upon rapid cooling and further handling, and their propensity to densify at high temperatures and long time in molten state severely limits their upscaling possibilities. Here, we present a solution to overcome these limitations and demonstrate that - by selecting suitable materials particularly fitting thermal and mechanical behavior to those of MOF-glass – it is possible to process large, crack-free MOF-glass sheets. By carefully optimizing each step of the process – from melting to performance testing – we successfully fabricate a crack-free, self-supported ZIF-62 glass membrane from pristine ZIF-62 crystals. The microstructure is investigated using microscopy as well as SEM-EDX analysis, confirming homogeneous boundary-free MOF-glass, while gas permeation experiments are carried out to prove the applicability of MOF-glass as gas separation membrane. The membrane exhibits exceptionally sharp methane molecular sieving cut-off with such low permeability that gas chromatography is unable to detect CH4. We conclude this work by giving a brief outlook of the remaining challenges and perspectives for MOF glasses in a view of gas separation membranes.
- Open Access
- 28 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Universal Method for Polyvalent Ions’ Redox State Quantification in Inorganic Materials Down to Trace Concentrations
The oxidation state control of polyvalent cations within materials is a pivotal determinant of their macroscopic properties and practical functionalities, from persistent and stress-stimulated luminescence, to energy storage and photocatalytic activity. Nonetheless, the resulting redox state is highly sensitive to synthetic conditions, and quantifying techniques aimed at its determination – while of the highest importance – remain constrained by practical challenges. In the present work, two simple and accessible wet-chemical methods, employing basic and easy-to-handle glassware and reagents, are introduced to address this issue. After validation on analytical standards encompassing diverse chemistries, they are applied to concrete off-stoichiometry materials of relevance – whether amorphous or crystalline – involving various redox couples and species, from highly reductive (Eu2+, Ti3+) to highly oxidizing (Ce4+, Tb4+). The roles of the host composition and processing conditions in altering the redox equilibria are discussed, and the obtained results are reinforced by the use of complementary analytical techniques. Multiple perspectives are emphasized, including the identification and resolution of the local environments and distributions of polyvalent cations, the isolation of high-valence species, and the provision of key insights into multifaceted phenomena for the design of advanced materials.
- 28 May 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessUniversal Method for Polyvalent Ions’ Redox State Quantification in Inorganic Materials Down to Trace Concentrations
The oxidation state control of polyvalent cations within materials is a pivotal determinant of their macroscopic properties and practical functionalities, from persistent and stress-stimulated luminescence, to energy storage and photocatalytic activity. Nonetheless, the resulting redox state is highly sensitive to synthetic conditions, and quantifying techniques aimed at its determination – while of the highest importance – remain constrained by practical challenges. In the present work, two simple and accessible wet-chemical methods, employing basic and easy-to-handle glassware and reagents, are introduced to address this issue. After validation on analytical standards encompassing diverse chemistries, they are applied to concrete off-stoichiometry materials of relevance – whether amorphous or crystalline – involving various redox couples and species, from highly reductive (Eu2+, Ti3+) to highly oxidizing (Ce4+, Tb4+). The roles of the host composition and processing conditions in altering the redox equilibria are discussed, and the obtained results are reinforced by the use of complementary analytical techniques. Multiple perspectives are emphasized, including the identification and resolution of the local environments and distributions of polyvalent cations, the isolation of high-valence species, and the provision of key insights into multifaceted phenomena for the design of advanced materials.
- Open Access
- 4 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Ideal Molecular Sieving with a Dense MOF for Helium Upgrading with Highly Diffusion Selective Mixed Matrix Membranes
Helium is one of the most critical resources of our planet, as it is a finite resource, cannot be produced from radioactive decay in sufficient amounts and escapes our atmosphere, while being extraordinarily important for high tech applications in research and medicine. We demonstrate a concept of using the “dense” metal-organic framework (MOF) MIL-116(Ga) as a molecular sieve specifically allowing diffusion of He. Incorporating up to 20 wt.% MIL-116(Ga) into polysulfone, a chemically stable, mechanically robust, and commercially available polymer, high performance mixed matrix membranes were fabricated and tested in gas permeation. The membranes reach He permeabilities up to 37.4 Barrer and He/CH4 selectivity of 1190, mimicking process conditions with He concentration of 4 % in CH4. With increasing filler content, permeability of He increases, while CH4 permeability decreases. Microstructural analysis of the MIL-116(Ga) reveals that the crystals grew into druse-like hollow crystals, highly beneficial for fast He permeability. CH4, N2 and CO2 cannot enter the crystal, as proven by sorption experiments, providing high diffusional selectivity. Furthermore, polymer filler interactions are investigated by scanning electron microscopy and energy dispersive x-ray spectroscopy. We benchmarked the performance to existing composites and polymers, where MIL-116(Ga)-formate stands out with extraordinary membrane performance.
- 4 December 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessIdeal Molecular Sieving with a Dense MOF for Helium Upgrading with Highly Diffusion Selective Mixed Matrix Membranes
Helium is one of the most critical resources of our planet, as it is a finite resource, cannot be produced from radioactive decay in sufficient amounts and escapes our atmosphere, while being extraordinarily important for high tech applications in research and medicine. We demonstrate a concept of using the “dense” metal-organic framework (MOF) MIL-116(Ga) as a molecular sieve specifically allowing diffusion of He. Incorporating up to 20 wt.% MIL-116(Ga) into polysulfone, a chemically stable, mechanically robust, and commercially available polymer, high performance mixed matrix membranes were fabricated and tested in gas permeation. The membranes reach He permeabilities up to 37.4 Barrer and He/CH4 selectivity of 1190, mimicking process conditions with He concentration of 4 % in CH4. With increasing filler content, permeability of He increases, while CH4 permeability decreases. Microstructural analysis of the MIL-116(Ga) reveals that the crystals grew into druse-like hollow crystals, highly beneficial for fast He permeability. CH4, N2 and CO2 cannot enter the crystal, as proven by sorption experiments, providing high diffusional selectivity. Furthermore, polymer filler interactions are investigated by scanning electron microscopy and energy dispersive x-ray spectroscopy. We benchmarked the performance to existing composites and polymers, where MIL-116(Ga)-formate stands out with extraordinary membrane performance.
- Open Access
- 25 December 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Micro-optical elements from optical-quality ZIF-62 hybrid glasses by hot-imprinting
Hybrid glasses derived from meltable metal-organic frameworks (MOFs) promise to combine the intriguing properties of MOFs with the universal processing ability of glasses. However, shaping of hybrid glasses in their liquid state has been elusive thus far. Here, we present optical-quality glasses derived from the zeolitic imidazole framework ZIF-62 in the form of cm-scale objects. These allow for in-depth studies of optical transparency and refraction across the ultraviolet to near-infrared spectral range. Fundamental viscosity data are reported using a ball penetration technique, and subsequently used to demonstrate the fabrication of micro-optical devices by thermal imprinting. Using 3D printed fused silica templates, we show that concave as well as convex structures can be obtained at high precision by remelting the glass without trading-off on material quality. This paves a route towards melt-processing of MOF-derived glasses on a scale relevant for real-world applications and enables multifunctional micro-optical devices combining the gas uptake and permeation ability of MOFs with the optical functionality of a glass.
- 25 December 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMicro-optical elements from optical-quality ZIF-62 hybrid glasses by hot-imprinting
Hybrid glasses derived from meltable metal-organic frameworks (MOFs) promise to combine the intriguing properties of MOFs with the universal processing ability of glasses. However, shaping of hybrid glasses in their liquid state has been elusive thus far. Here, we present optical-quality glasses derived from the zeolitic imidazole framework ZIF-62 in the form of cm-scale objects. These allow for in-depth studies of optical transparency and refraction across the ultraviolet to near-infrared spectral range. Fundamental viscosity data are reported using a ball penetration technique, and subsequently used to demonstrate the fabrication of micro-optical devices by thermal imprinting. Using 3D printed fused silica templates, we show that concave as well as convex structures can be obtained at high precision by remelting the glass without trading-off on material quality. This paves a route towards melt-processing of MOF-derived glasses on a scale relevant for real-world applications and enables multifunctional micro-optical devices combining the gas uptake and permeation ability of MOFs with the optical functionality of a glass.
- Open Access
- 4 September 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Gas Separating Metal-Organic Framework Membrane Films on Large Area 3D-Printed Tubular Ceramic Scaffolds
Polycrystalline metal-organic framework (MOF) membrane films prepared on ceramic supports can separate gases with high energy efficiency. They generally exhibit very high permeance and selectivity but suffer from cost issues through the required ceramic supports. Increasing the area and reducing the ceramic component to a minimum could be a strategy to enabling neat membrane of MOFs. In a rapid prototyping approach using 3D-printed porous scaffolds with a double helical channel geometry, we dramatically increase the active membrane area-to-volume ratio. Following stereolithographic printing and de-binding of a ceramic slurry, an adapted sintering protocol was employed to sinter commercially available alumina slurries into porous scaffolds. The 3D-printed scaffolds were optimized at a porosity of 40%, with satisfying mechanical stability. Furthermore, synthetic procedures yielding omnidirectional, homogeneous coatings on the outside and inside of the tubular scaffolds were developed. Membrane films of ZIF-8 and HKUST-1 covering a huge 50 cm² membrane area were produced in this way by applying a counter-diffusion methodology. Gas separation performance was evaluated for H2, CO2, N2 and CH4, in single-gas measurements and on their binary gas mixtures.
- 4 September 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessGas Separating Metal-Organic Framework Membrane Films on Large Area 3D-Printed Tubular Ceramic Scaffolds
Polycrystalline metal-organic framework (MOF) membrane films prepared on ceramic supports can separate gases with high energy efficiency. They generally exhibit very high permeance and selectivity but suffer from cost issues through the required ceramic supports. Increasing the area and reducing the ceramic component to a minimum could be a strategy to enabling neat membrane of MOFs. In a rapid prototyping approach using 3D-printed porous scaffolds with a double helical channel geometry, we dramatically increase the active membrane area-to-volume ratio. Following stereolithographic printing and de-binding of a ceramic slurry, an adapted sintering protocol was employed to sinter commercially available alumina slurries into porous scaffolds. The 3D-printed scaffolds were optimized at a porosity of 40%, with satisfying mechanical stability. Furthermore, synthetic procedures yielding omnidirectional, homogeneous coatings on the outside and inside of the tubular scaffolds were developed. Membrane films of ZIF-8 and HKUST-1 covering a huge 50 cm² membrane area were produced in this way by applying a counter-diffusion methodology. Gas separation performance was evaluated for H2, CO2, N2 and CH4, in single-gas measurements and on their binary gas mixtures.
- Open Access
- 12 February 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Precise control over gas transporting channels in zeolitic imidazolate framework glasses
Porous materials, such as metal-organic frameworks emerge to solve important quests of our modern society, such as CO2 sequestration. Zeolitic Imidazolate Frameworks (ZIFs) can undergo a glass transition to form ZIF-glasses; they combine the liquid handling of classical glasses with tremendous potential for gas separations. Using millimeter-sized ZIF-62 single crystals and centimeter-sized ZIF-62-glass we demonstrate scalability and processability. Further, following the evolution of gas penetration into ZIF-crystals and ZIF-glasses by IR microimaging techniques enables to determine diffusion constants and changes to the pore architecture on the Angstrom-scale. The evolution of ZIF-glasses is observed in situ using a microscope heating stage. The pore-collapse during glass-processing is tracked by changes to density and volume of the glasses. Mass spectrometry investigates the crystal-to-glass transition and thermal processing ability.
- 12 February 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessPrecise control over gas transporting channels in zeolitic imidazolate framework glasses
Porous materials, such as metal-organic frameworks emerge to solve important quests of our modern society, such as CO2 sequestration. Zeolitic Imidazolate Frameworks (ZIFs) can undergo a glass transition to form ZIF-glasses; they combine the liquid handling of classical glasses with tremendous potential for gas separations. Using millimeter-sized ZIF-62 single crystals and centimeter-sized ZIF-62-glass we demonstrate scalability and processability. Further, following the evolution of gas penetration into ZIF-crystals and ZIF-glasses by IR microimaging techniques enables to determine diffusion constants and changes to the pore architecture on the Angstrom-scale. The evolution of ZIF-glasses is observed in situ using a microscope heating stage. The pore-collapse during glass-processing is tracked by changes to density and volume of the glasses. Mass spectrometry investigates the crystal-to-glass transition and thermal processing ability.