Zhanna Sharipkhan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhanna Sharipkhan has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Alfira Sabitova
Shakarim University
7 shared publications - Bulbul Bayakhmetova
Shakarim University
6 shared publications - Binur Mussabayeva
Department of Chemistry and Ecology, Research School of Physical and Chemical Sciences, Shakarim University, Glinky Str., 20A, Semey 071412, Kazakhstan
3 shared publications - Nurlan Mukhamediyarov
Shakarim University
3 shared publications - Aitkazin Nurbol
Department of Chemistry and Ecology, Shakarim University, Semey 071400, Kazakhstan
2 shared publications - B. S. Gaisina
Shakarim University
2 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 2(22),p. 715-725
DEVELOPMENT OF A METHOD FOR PURIFICATION AND UTILIZATION OF USED MOTOR OILS USING BENTONITE SORBENTS
The study examines modern approaches to oil regeneration, including physical, chemical, and sorption methods, and substantiates the choice of adsorption purification as an environmentally safe and technologically simple alternative. An effective method for the purification and utilization of used motor oils using natural and modified bentonite sorbents has been developed. The research objects included used KIXX 10W-40 motor oil, P1T1A and «13 Horizon» bentonites, as well as their modified forms obtained through acid and peroxide activation methods. Experimental studies were carried out using a vacuum oil purification unit and sorption filtration techniques. The purification efficiency was evaluated using FTIR spectroscopy, thermogravimetric analysis (TGA), and ICP-MS methods. The results demonstrated a significant reduction in water content, oxidation products, sulfur-containing compounds, and metal impurities. The highest efficiency was achieved with modified P1T1A bentonite, ensuring maximum contaminant removal. It was established that modification increases specific surface area and sorption capacity, enhancing adsorption processes. The proposed method is simple, cost-effective, scalable, and does not generate secondary toxic waste, making it suitable for industrial application while reducing environmental impact.
- 29 July 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 2(22),p. 715-725
Open AccessDEVELOPMENT OF A METHOD FOR PURIFICATION AND UTILIZATION OF USED MOTOR OILS USING BENTONITE SORBENTS
The study examines modern approaches to oil regeneration, including physical, chemical, and sorption methods, and substantiates the choice of adsorption purification as an environmentally safe and technologically simple alternative. An effective method for the purification and utilization of used motor oils using natural and modified bentonite sorbents has been developed. The research objects included used KIXX 10W-40 motor oil, P1T1A and «13 Horizon» bentonites, as well as their modified forms obtained through acid and peroxide activation methods. Experimental studies were carried out using a vacuum oil purification unit and sorption filtration techniques. The purification efficiency was evaluated using FTIR spectroscopy, thermogravimetric analysis (TGA), and ICP-MS methods. The results demonstrated a significant reduction in water content, oxidation products, sulfur-containing compounds, and metal impurities. The highest efficiency was achieved with modified P1T1A bentonite, ensuring maximum contaminant removal. It was established that modification increases specific surface area and sorption capacity, enhancing adsorption processes. The proposed method is simple, cost-effective, scalable, and does not generate secondary toxic waste, making it suitable for industrial application while reducing environmental impact.
- Open Access
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 620-636
REVIEW OF HIGH-QUALITY BITUMEN PRODUCTION TECHNOLOGY: PROBLEMS, PROSPECTS
The article provides an expert analytical review of domestic and foreign literary sources based on the tasks set to achieve the goal of developing innovative technologies for producing high-quality bitumen from by-products of oil production and processing. Modern scientific work demonstrates the effectiveness of using polymer, mineral and biological components, as well as recycled materials to increase the durability and stability of bitumen binders. Particular attention is paid to polymer modifiers such as SBS (styrene-butadiene-styrene), which increase the elasticity and strength of bitumen, reducing the likelihood of cracking and deformation. The use of recycled materials, including rubber chips, vacuum gas oil and fly ash, not only improves the properties of bitumen, but also reduces the negative impact on the environment. A promising area is the use of biomodifiers, among which lignin, a natural polymer with high chemical and thermal stability, plays a special role. Studies have shown that the introduction of lignin into bitumen improves its rheological properties, increases resistance to aging and oxidation, and increases the rigidity and strength of the coating. Lignin can act as a filler or partial replacement for bitumen, which makes it an environmentally and economically beneficial component. The use of various modifying additives, including polymers, industrial waste and biocomponents, contributes to improving the quality of bitumen, reducing production costs, increasing the energy efficiency of technological processes and extending the service life of road surfaces. It is also important to evaluate the change in bitumen properties during the production and laying of asphalt concrete mix.
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 620-636
Open AccessREVIEW OF HIGH-QUALITY BITUMEN PRODUCTION TECHNOLOGY: PROBLEMS, PROSPECTS
The article provides an expert analytical review of domestic and foreign literary sources based on the tasks set to achieve the goal of developing innovative technologies for producing high-quality bitumen from by-products of oil production and processing. Modern scientific work demonstrates the effectiveness of using polymer, mineral and biological components, as well as recycled materials to increase the durability and stability of bitumen binders. Particular attention is paid to polymer modifiers such as SBS (styrene-butadiene-styrene), which increase the elasticity and strength of bitumen, reducing the likelihood of cracking and deformation. The use of recycled materials, including rubber chips, vacuum gas oil and fly ash, not only improves the properties of bitumen, but also reduces the negative impact on the environment. A promising area is the use of biomodifiers, among which lignin, a natural polymer with high chemical and thermal stability, plays a special role. Studies have shown that the introduction of lignin into bitumen improves its rheological properties, increases resistance to aging and oxidation, and increases the rigidity and strength of the coating. Lignin can act as a filler or partial replacement for bitumen, which makes it an environmentally and economically beneficial component. The use of various modifying additives, including polymers, industrial waste and biocomponents, contributes to improving the quality of bitumen, reducing production costs, increasing the energy efficiency of technological processes and extending the service life of road surfaces. It is also important to evaluate the change in bitumen properties during the production and laying of asphalt concrete mix.
- Open Access
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 788-799
HYBRID MODIFICATION OF BITUMEN FOR DURABLE AND SUSTAINABLE ASPHALT PAVEMENTS
Asphalt aging is a critical factor affecting the long-term performance and durability of pavement structures, as it induces complex chemical, rheological, and microstructural transformations in asphalt binders and mixtures. Environmental and mechanical stressors, including temperature, oxygen exposure, ultraviolet radiation, moisture ingress, and traffic loading, accelerate oxidation processes, leading to binder stiffening, embrittlement, and reduced resistance to cracking and moisture damage. In response to increasing environmental concerns and resource limitations, sustainable materials such as reclaimed asphalt pavement, bio-based binders, recycled polymers, and industrial by-products have been increasingly incorporated into asphalt mixtures; however, their influence on aging mechanisms and long-term durability remains insufficiently understood. This study presents a comprehensive literature-based review of asphalt aging mechanisms, sustainable material modification strategies, and durability prediction approaches. A structured multi-stage review methodology was applied to classify and evaluate modification technologies based on performance effectiveness, environmental sustainability, economic feasibility, and applicability under diverse climatic and operational conditions. The review synthesizes experimental and modelling findings on chemical aging processes, microstructural evolution, aggregate – binder interactions, and multiphysics ageing simulations. An integrated conceptual framework linking environmental exposure conditions, material aging mechanisms, microstructural parameters, and rheological performance indicators is proposed to support durability-based and sustainable pavement design. Key research gaps and future research directions are identified, including the need for advanced aging simulation protocols, multiscale characterization approaches, and long-term field validation of sustainable modifiers. The findings of this review provide a scientific basis for developing resilient and environmentally sustainable pavement infrastructure.
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 788-799
Open AccessHYBRID MODIFICATION OF BITUMEN FOR DURABLE AND SUSTAINABLE ASPHALT PAVEMENTS
Asphalt aging is a critical factor affecting the long-term performance and durability of pavement structures, as it induces complex chemical, rheological, and microstructural transformations in asphalt binders and mixtures. Environmental and mechanical stressors, including temperature, oxygen exposure, ultraviolet radiation, moisture ingress, and traffic loading, accelerate oxidation processes, leading to binder stiffening, embrittlement, and reduced resistance to cracking and moisture damage. In response to increasing environmental concerns and resource limitations, sustainable materials such as reclaimed asphalt pavement, bio-based binders, recycled polymers, and industrial by-products have been increasingly incorporated into asphalt mixtures; however, their influence on aging mechanisms and long-term durability remains insufficiently understood. This study presents a comprehensive literature-based review of asphalt aging mechanisms, sustainable material modification strategies, and durability prediction approaches. A structured multi-stage review methodology was applied to classify and evaluate modification technologies based on performance effectiveness, environmental sustainability, economic feasibility, and applicability under diverse climatic and operational conditions. The review synthesizes experimental and modelling findings on chemical aging processes, microstructural evolution, aggregate – binder interactions, and multiphysics ageing simulations. An integrated conceptual framework linking environmental exposure conditions, material aging mechanisms, microstructural parameters, and rheological performance indicators is proposed to support durability-based and sustainable pavement design. Key research gaps and future research directions are identified, including the need for advanced aging simulation protocols, multiscale characterization approaches, and long-term field validation of sustainable modifiers. The findings of this review provide a scientific basis for developing resilient and environmentally sustainable pavement infrastructure.
- Open Access
The Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metal Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver, copper and zinc. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to analyze the effect of the granulometric composition of slags on the efficiency of extraction of non-ferrous metals using the flotation method. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis and flotation tests using Na2S, KAX and 3418A reagents. The analysis showed that the main part of the slag consisted of particles less than 3.36 mm, while the content of copper was 0.60%, zinc was 2.37%, gold was 0.1 g/t and silver was 7.2 g/t. Flotation experiments confirmed that the use of Na2S and 3418A increased the recoverability of copper and zinc, and reducing the particle size to d80 <10 microns increased the efficiency of copper extraction by 7%. Thus, the optimization of flotation processes and the control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
Open AccessThe Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metal Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver, copper and zinc. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to analyze the effect of the granulometric composition of slags on the efficiency of extraction of non-ferrous metals using the flotation method. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis and flotation tests using Na2S, KAX and 3418A reagents. The analysis showed that the main part of the slag consisted of particles less than 3.36 mm, while the content of copper was 0.60%, zinc was 2.37%, gold was 0.1 g/t and silver was 7.2 g/t. Flotation experiments confirmed that the use of Na2S and 3418A increased the recoverability of copper and zinc, and reducing the particle size to d80 <10 microns increased the efficiency of copper extraction by 7%. Thus, the optimization of flotation processes and the control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
- Open Access
- 15 May 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (2) , 20
Investigation of Ionic Conductivity of Electrolytes for Anode-Free Lithium-Ion Batteries by Impedance Spectroscopy
Anode-free lithium-ion batteries offer a volumetric energy density approximately 60% higher than that of conventional lithium-ion cells. Despite this advantage, they often experience rapid capacity degradation and a limited cycle life. Optimizing electrolyte formulations—particularly through the use of specific additives, solvents, and lithium salts—is essential to improving these systems. This study explores electrolytes composed of fluorinated and carbonate-based solvents applied in anode-free lithium-ion cells featuring copper as the anode substrate and Li1.05Ni0.33Mn0.33Co0.33O2 as the cathode. In the present work, the ionic conductivity of electrolytes was studied by impedance spectroscopy, and the electrochemical parameters of anode-free lithium-ion cells were compared using these electrolyte solutions: lithium difluoro(oxalato)borat (LIDFOB) salts were used in a mixture of solvents such as fluoroethylene carbonate (FEC) and dimethoxyethane (DME) in a ratio of 3:7 and in a mixture of propylene carbonate (PC) and dimethoxyethane in a ratio of 3:7. Enhanced performance was observed upon the substitution of conventional carbonates with fluorinated co-solvents. The findings suggest that LiDFOB is a thermostable salt, and its high conductivity contributes to the formation and stabilization of the interface of solid electrolytes. The results indicate that at low temperature conditions, a double salt should be used for lithium current sources, for example, 0.4 M LiDFOB and 0.6 M LiBF4, as well as electrolyte additives such as fluoroethylene carbonate and lithium nitrate.
- 15 May 2025
- Published by MDPI AG in Electrochem
- Vol. 6 (2) , 20
Open AccessInvestigation of Ionic Conductivity of Electrolytes for Anode-Free Lithium-Ion Batteries by Impedance Spectroscopy
Anode-free lithium-ion batteries offer a volumetric energy density approximately 60% higher than that of conventional lithium-ion cells. Despite this advantage, they often experience rapid capacity degradation and a limited cycle life. Optimizing electrolyte formulations—particularly through the use of specific additives, solvents, and lithium salts—is essential to improving these systems. This study explores electrolytes composed of fluorinated and carbonate-based solvents applied in anode-free lithium-ion cells featuring copper as the anode substrate and Li1.05Ni0.33Mn0.33Co0.33O2 as the cathode. In the present work, the ionic conductivity of electrolytes was studied by impedance spectroscopy, and the electrochemical parameters of anode-free lithium-ion cells were compared using these electrolyte solutions: lithium difluoro(oxalato)borat (LIDFOB) salts were used in a mixture of solvents such as fluoroethylene carbonate (FEC) and dimethoxyethane (DME) in a ratio of 3:7 and in a mixture of propylene carbonate (PC) and dimethoxyethane in a ratio of 3:7. Enhanced performance was observed upon the substitution of conventional carbonates with fluorinated co-solvents. The findings suggest that LiDFOB is a thermostable salt, and its high conductivity contributes to the formation and stabilization of the interface of solid electrolytes. The results indicate that at low temperature conditions, a double salt should be used for lithium current sources, for example, 0.4 M LiDFOB and 0.6 M LiBF4, as well as electrolyte additives such as fluoroethylene carbonate and lithium nitrate.
- Open Access
- 13 May 2025
- Published by MDPI AG in Preprints.org
The Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metals’ Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver and copper. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to study the effect of the granulometric composition of slags on the efficiency of extraction of precious metals using various enrichment methods. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis, flotation tests using Na₂S and 3418A reagents, as well as magnetic separation. The analysis showed that the main part of the slag consists of particles less than 3.36 mm, while the content of copper is 0.60%, zinc – 2.37%, gold – 0.1 g/t, and silver – 7.2 g/t. Flotation experiments have confirmed that the use of Na₂S and 3418A increases the recoverability of copper and silver, and reducing the particle size to d80 <10 microns increases the efficiency of copper extraction by 7%. Magnetic separation did not have a significant effect on the concentration of non-ferrous metals, but it allowed us to isolate an iron-containing fraction suitable for further processing. Thus, optimization of flotation processes and control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
- 13 May 2025
- Published by MDPI AG in Preprints.org
Open AccessThe Effect of the Granulometric Composition of Slags on the Efficiency of Non-Ferrous Metals’ Extraction
The processing of metallurgical slags is an urgent task, as they contain residual amounts of precious and non-ferrous metals such as gold, silver and copper. The efficiency of extraction of these metals directly depends on the granulometric composition of the processed material, which determines the need for its detailed analysis. The purpose of this study is to study the effect of the granulometric composition of slags on the efficiency of extraction of precious metals using various enrichment methods. For this purpose, studies were carried out, including granulometric analysis, chemical composition analysis, flotation tests using Na₂S and 3418A reagents, as well as magnetic separation. The analysis showed that the main part of the slag consists of particles less than 3.36 mm, while the content of copper is 0.60%, zinc – 2.37%, gold – 0.1 g/t, and silver – 7.2 g/t. Flotation experiments have confirmed that the use of Na₂S and 3418A increases the recoverability of copper and silver, and reducing the particle size to d80 <10 microns increases the efficiency of copper extraction by 7%. Magnetic separation did not have a significant effect on the concentration of non-ferrous metals, but it allowed us to isolate an iron-containing fraction suitable for further processing. Thus, optimization of flotation processes and control of granulometric composition make it possible to increase the efficiency of metallurgical waste processing, reduce losses of valuable metals and reduce the environmental burden.
- Open Access
- 11 February 2023
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(7),p. 6-15
SYNTHESIS AND APPLICATION OF BIOCOMPATIBLE CRYOGELS
Biocompatible cryogels are substances with a very high prospect for obtaining functional materials. The macroporous structure is of great importance for the use of cryogels as important materials in medicine, catalysis and some areas of biotechnology. In this review, the authors focused on methods for producing cryogels based on biopolymers, interpolyelectrolyte complexes of biopolymers and composite cryogels based on them. First, a brief theoretical information on the properties of cryogels and methods for producing cryogels based on biopolymers will be considered. The second part of the review contains the latest achievements in the production of cryogel based on biopolymer complexes and composite cryogels. The features of cryogenic synthesis and factors affecting the required final properties of cryogenic materials are considered. In the third part of the review, the fields of application of biocompatible cryogels in oil and gas fields of the type under consideration in biotechnology, catalysis and medicine are studied. In biotechnology, cryogenic materials are used to immobilize molecules and biological cells, as a basis for cell growth and as chromatographic materials for cell separation. In catalysis, cryogenic materials are used as a matrix for the immobilization of metal nanoparticles and enzymes. Biocompatible cryogels and composites based on them are widely used in medicine to restore bone and cartilage tissue, as well as for the proper transfer of drugs, ensuring the release of drugs in the body. The use of cryotropic polymer compositions with controlled hydrophobic properties as a reinforcing layer for creating hydro barrier screens in oil and gas fields is promising.
- 11 February 2023
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 3(7),p. 6-15
Open AccessSYNTHESIS AND APPLICATION OF BIOCOMPATIBLE CRYOGELS
Biocompatible cryogels are substances with a very high prospect for obtaining functional materials. The macroporous structure is of great importance for the use of cryogels as important materials in medicine, catalysis and some areas of biotechnology. In this review, the authors focused on methods for producing cryogels based on biopolymers, interpolyelectrolyte complexes of biopolymers and composite cryogels based on them. First, a brief theoretical information on the properties of cryogels and methods for producing cryogels based on biopolymers will be considered. The second part of the review contains the latest achievements in the production of cryogel based on biopolymer complexes and composite cryogels. The features of cryogenic synthesis and factors affecting the required final properties of cryogenic materials are considered. In the third part of the review, the fields of application of biocompatible cryogels in oil and gas fields of the type under consideration in biotechnology, catalysis and medicine are studied. In biotechnology, cryogenic materials are used to immobilize molecules and biological cells, as a basis for cell growth and as chromatographic materials for cell separation. In catalysis, cryogenic materials are used as a matrix for the immobilization of metal nanoparticles and enzymes. Biocompatible cryogels and composites based on them are widely used in medicine to restore bone and cartilage tissue, as well as for the proper transfer of drugs, ensuring the release of drugs in the body. The use of cryotropic polymer compositions with controlled hydrophobic properties as a reinforcing layer for creating hydro barrier screens in oil and gas fields is promising.