YLYang Liu

Yang Liu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yang Liu has a total of 15 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    4.11 A/1650 V Sapphire-Substrate GaN MIS-HEMTs with Thin Buffer for Medium-Voltage Power Applications

    by Changhao Chen, Yang Liu, Xiaowei Zhou, Peixian Li, Yongfeng Zhang, Bo Yang, Zili Yang, Junchun Bai

    The substantially lower breakdown electric field of Si compared to GaN necessitates thick buffer layers in Si-based GaN power devices for medium-voltage applications, significantly increasing cost. Recently, sapphire substrates, offering high electrical insulation and excellent mechanical strength, have emerged as a promising alternative. In this work, we demonstrate a CMOS-compatible process for sapphire-based GaN MIS-HEMTs utilizing a thin buffer layer. The fabricated devices with a WG of 20.4 mm and an LGD of 24 μm achieve a high off-state breakdown voltage >1650 V and a maximum on-state current > 4.1 A, with tight statistical distributions of VTH and RON across the wafer. Furthermore, statistical characterization results of dynamic RON and leakage current under electrical stress conditions at both room temperature and 150 °C, confirm operational viability at high temperatures. Finally, long-term reliability for 650 V operation is validated by high-temperature reverse bias (HTRB) accelerated aging tests.


  • Open Access

    Design and Application of p-AlGaN Short Period Superlattice

    by Yang Liu, Changhao Chen, Xiaowei Zhou, Peixian Li, Bo Yang, Yongfeng Zhang, Junchun Bai

    AlGaN-based high-electron-mobility transistors are critical for next-generation power electronics and radio-frequency applications, yet achieving stable enhancement-mode operation with a high threshold voltage remains a key challenge. In this work, we designed p-AlGaN superlattices with different structures and performed energy band structure simulations using the device simulation software Silvaco. The results demonstrate that thin barrier structures lead to reduced acceptor incorporation, thereby decreasing the number of ionized acceptors, while facilitating vertical hole transport. Superlattice samples with varying periodic thicknesses were grown via metal-organic chemical vapor deposition, and their crystalline quality and electrical properties were characterized. The findings reveal that although gradient-thickness barriers contribute to enhancing hole concentration, the presence of thick barrier layers restricts hole tunneling and induces stronger scattering, ultimately increasing resistivity. In addition, we simulated the structure of the enhancement-mode HEMT with p-AlGaN as the under-gate material. Analysis of its energy band structure and channel carrier concentration indicates that adopting p-AlGaN superlattices as the under-gate material facilitates achieving a higher threshold voltage in enhancement-mode HEMT devices, which is crucial for improving device reliability and reducing power loss in practical applications such as electric vehicles.


  • Open Access

    Performance Study of Ultraviolet AlGaN/GaN Light-Emitting Diodes Based on Superlattice Tunneling Junction

    by Zhuang Zhao, Yang Liu, Peixian Li, Xiaowei Zhou, Bo Yang, Yingru Xiang, Junchun Bai

    In this study, we aim to enhance the internal quantum efficiency (IQE) of AlGaN-based ultraviolet (UV) light-emitting diodes (LEDs) by using the short-period AlGaN/GaN superlattice as a tunnel junction (TJ) to construct polarized structures. We analyze in detail the effect of this polarized TJ on the carrier injection efficiency and investigate the increase in hole and electron density caused by the formation of 2D hole gas (2DHG) and 2D electron gas (2DEG) in the superlattice structure. In addition, a dielectric layer is introduced to evaluate the effect of stress changes on the tunneling probability and current spread in TJ. At a current of 140 mA, this method demonstrates effective current expansion. Our results not only improve the performance of UV LEDs but also provide an important theoretical and experimental basis for future research on UV LEDs based on superlattice TJ. In addition, our study also highlights the key role of group III nitride materials in achieving efficient UV luminescence, and the polarization characteristics and band structure of these materials are critical for optimizing carrier injection and recombination processes.


  • Open Access

    Design and Growth of P-Type AlGaN Graded Composition Superlattice

    by Yang Liu, Xue Yang, Xiaowei Zhou, Peixian Li, Bo Yang, Zhuang Zhao, Yingru Xiang, Junchun Bai

    A graded composition superlattice structure is proposed by combining simulation with experimentation. The structural factors affecting graded symmetric superlattices and graded asymmetric superlattices and their action modes are simulated and analyzed. A Mg-doped graded symmetric superlattice structure with high Al content, excellent structural quality, good surface morphology and excellent electrical properties was grown by MOCVD equipment. The AlxGa1−xN superlattice with Al composition of 0.7 in the barrier exhibits a hole concentration of approximately 5 × 1015 cm−3 and a resistivity of 66 Ω·cm.


  • Open Access

    Enhanced Hole Injection in AlGaN-Based Ga-Polar Ultraviolet Light-Emitting Diodes with Polarized Electric-Field Reservoir Electron Barrier

    by Zhuang Zhao, Yang Liu, Peixian Li, Xiaowei Zhou, Bo Yang, Yingru Xiang

    In this study, we propose a polarized electron blocking layer (EBL) structure using AlxGa1−xN/AlxGa1−xN to enhance the internal quantum efficiency (IQE) of AlGaN-based ultraviolet light-emitting diodes (UV LEDs). Our findings indicate that this polarized EBL structure significantly improves IQE compared to conventional EBLs. Additionally, we introduce an electric-field reservoir (EFR) optimization method to maximize IQE. Specifically, optimizing the polarized EBL structure of AlxGa1−xN/AlxGa1−xN enhances the hole drift rate, resulting in an IQE improvement of 19% and an optical output power increase of 186 mW at a current of 210 mA.


  • Open Access

    Design and Growth of Low Resistivity P-Type AlGaN Superlattice Structure

    by Yang Liu, Xiaowei Zhou, Peixian Li, Bo Yang, Zhuang Zhao

    This work investigated the impact of periodic thickness and doping region on the doping efficiency of the P-type AlGaN superlattice. In this paper, the band structure of the simulated superlattice was analyzed. The superlattice structure of Al0.1Ga0.3N/Al0.4Ga0.6N, and the AlGaN buffer on the sapphire substrate, achieved a resistivity of ~3.3 Ω·cm. The results indicate that barrier doping and low periodic thickness offer significant advantages in introducing a reduction of the resistivity of P-type AlGaN superlattice structures.


  • Open Access

    Power Enhancement of 265 nm DUV-LED Flip-Chip by HVPE-AlN High-Temperature Annealing

    by Wenkai Yue, Ruixuan Liu, Peixian Li, Xiaowei Zhou, Yang Liu, Bo Yang, Yingxiao Liu, Xiaowei Wang

    In this paper, the X-ray diffraction full width at half the maximum (XRD FWHM) of a 3.5 µm-thick hydride vapor phase epitaxy-aluminum nitride (HVPE-AlN) (002) face after high-temperature annealing was reduced to 129 arcsec. The tensile strain in the HVPE-AlN samples gradually released with the increasing annealing temperature. When the annealing temperature exceeded 1700 °C, an aluminum oxynitride (AlON) region was generated at the contact interface between HVPE-AlN and sapphire, and the AlON structure was observed to conform to the characteristics of Al5O6N by high-resolution transmission electron microscopy (HRTEM). A 265 nm light-emitting diode (LED) based on an HVPE-AlN template annealed at 1700 °C achieved a light output power (LOP) of 4.48 mW at 50 mA, which was approximately 57% greater than that of the original sample.