Ayumi Nagai
Research Subjects
Ayumi Nagai has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Kenji Nakamura
Tohoku University
2 shared publications - Emiri Asahina
Graduate School of Engineering, Tohoku University, Sendai, Japan
1 shared publication - Itsuki Masuda
National Institute of Technology, Nara College, Yamatokoriyama, Japan
1 shared publication Kazuhide Mitsuya
Graduate School of Engineering, Tohoku University, Sendai, Japan
1 shared publicationKosuke Maeda
DAIHEN Corporation, Osaka, Japan
1 shared publicationManabu Ishitobi
National Institute of Technology, Nara College, Yamatokoriyama, Japan
1 shared publication
Latest Publications
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-239
Investigation of Multipole Transverse-Flux-type Switched Reluctance Motor
Switched reluctance motors (SRMs) consist of only stator and rotor cores, and windings. Thus, they have a simple and robust structure, and low cost. However, torque density and efficiency of SRMs are generally inferior to those of permanent magnet synchronous motors (PMSMs). This paper focuses on transverse-flux-type SRMs (TFSRMs), which have larger torque than conventional radial-flux-type SRMs (RFSRMs). This paper discusses a relationship between the number of poles and torque using a simple magnetic circuit.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 236-239
Investigation of Multipole Transverse-Flux-type Switched Reluctance Motor
Switched reluctance motors (SRMs) consist of only stator and rotor cores, and windings. Thus, they have a simple and robust structure, and low cost. However, torque density and efficiency of SRMs are generally inferior to those of permanent magnet synchronous motors (PMSMs). This paper focuses on transverse-flux-type SRMs (TFSRMs), which have larger torque than conventional radial-flux-type SRMs (RFSRMs). This paper discusses a relationship between the number of poles and torque using a simple magnetic circuit.
- 20 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (11) , 1-5
Structure of Air-Core Power Inductor With High Energy Density and Low Copper Loss
In recent years, the development of power inductors with high inductance density and low loss has been required to realize high power density power supplies. The proposed inductor can be used in the high-power range where solenoid inductors are used and have higher inductance density than conventional inductors. The relationship between structural parameters and inductance is clarified based on the basic theoretical equation of inductance. Moreover, this paper discussed the relationship between loss and structure due to skin and proximity effects using electromagnetic field analysis. The results provide insights into the principles for the design of an air core inductor with high energy density and low copper loss. A prototype test is conducted to prove the usefulness of the proposed inductor. As a result, the prototype inductor achieved an inductance density of 360 μH/kg at 500 kHz, approximately 23 times higher than conventional solenoid inductors.
- 20 July 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 59 (11) , 1-5
Structure of Air-Core Power Inductor With High Energy Density and Low Copper Loss
In recent years, the development of power inductors with high inductance density and low loss has been required to realize high power density power supplies. The proposed inductor can be used in the high-power range where solenoid inductors are used and have higher inductance density than conventional inductors. The relationship between structural parameters and inductance is clarified based on the basic theoretical equation of inductance. Moreover, this paper discussed the relationship between loss and structure due to skin and proximity effects using electromagnetic field analysis. The results provide insights into the principles for the design of an air core inductor with high energy density and low copper loss. A prototype test is conducted to prove the usefulness of the proposed inductor. As a result, the prototype inductor achieved an inductance density of 360 μH/kg at 500 kHz, approximately 23 times higher than conventional solenoid inductors.
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (3) , 3256-3264
A Novel Transverse-Flux-Type Switched Reluctance Motor With Reverse Bias Permanent Magnets
Switched reluctance motors (SRMs) consist of only stator and rotor cores, and windings. Thus, they have a simple and robust structure, and low cost. However, torque density and efficiency of SRMs are generally inferior to those of permanent magnet synchronous motors (PMSMs). This paper presents a novel transverse-flux-type switched reluctance motor (TFSRM). The proposed TFSRM has permanent magnets in the rotor cores for applying reverse bias magnetic field, which can expand the operating area and improve both torque and efficiency. The validity and usefulness of the proposed TFSRM are proved by a three-dimensional finite element method (3D-FEM) and prototype tests.
- 16 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 59 (3) , 3256-3264
A Novel Transverse-Flux-Type Switched Reluctance Motor With Reverse Bias Permanent Magnets
Switched reluctance motors (SRMs) consist of only stator and rotor cores, and windings. Thus, they have a simple and robust structure, and low cost. However, torque density and efficiency of SRMs are generally inferior to those of permanent magnet synchronous motors (PMSMs). This paper presents a novel transverse-flux-type switched reluctance motor (TFSRM). The proposed TFSRM has permanent magnets in the rotor cores for applying reverse bias magnetic field, which can expand the operating area and improve both torque and efficiency. The validity and usefulness of the proposed TFSRM are proved by a three-dimensional finite element method (3D-FEM) and prototype tests.