Mika Lyly
Mika Lyly has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Tiina Salmi
Tampere University
5 shared publications - Valtteri Lahtinen
Quanscient Oy
5 shared publications - Nicolo Riva
Plasma Science and Fusion Center, Massachusetts Institute of Technology, Cambridge, MA, USA
4 shared publications A. Halbach
Quanscient Oy, Tampere, Finland
3 shared publications- Dmitry Sotnikov
Paul Scherrer Institut PSI, Villigen, Switzerland
3 shared publications - Janne Ruuskanen
Tampere University, Tampere, Finland
3 shared publications
Latest Publications
- 25 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Modelling of a Large-Scale Non-Insulated Non-Planar HTS Stellarator Coil Using Quanscient Allsolve
Stellarators present features such as steady-state operation and intrinsic stability that make them more attractive than tokamaks in their scaling to fusion power plants. By leveraging more possible configurations, stellarators can be optimized for better engineering feasibility, e.g., resilience to manufacturing tolerances, reduced mechanical load on conductor, material optimization, cost of fabrication. Finite Element Analyses are crucial for the design and optimization of High-Temperature Superconducting (HTS) REBCO non-planar coils. However, accurate simulation of large-scale magnetostatic, mechanical, and quench models can take days or even weeks to compute. In this work, we present a model of a real-size, HTS, non-insulated, non-planar stellarator coil and perform in Quanscient Allsolve®, a transient simulation study including modelling quench, using the $H - \varphi $ formulation. It is shown that transient model benefits heavily from the built-in Domain Decomposition Method (DDM), which allows reaching reasonable computation times. Such models become then invaluable in predicting and understanding the complex behavior of non-insulated large-scale REBCO magnets, including their intrinsic energy imbalance.
- 25 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 35 (5) , 1-5
Modelling of a Large-Scale Non-Insulated Non-Planar HTS Stellarator Coil Using Quanscient Allsolve
Stellarators present features such as steady-state operation and intrinsic stability that make them more attractive than tokamaks in their scaling to fusion power plants. By leveraging more possible configurations, stellarators can be optimized for better engineering feasibility, e.g., resilience to manufacturing tolerances, reduced mechanical load on conductor, material optimization, cost of fabrication. Finite Element Analyses are crucial for the design and optimization of High-Temperature Superconducting (HTS) REBCO non-planar coils. However, accurate simulation of large-scale magnetostatic, mechanical, and quench models can take days or even weeks to compute. In this work, we present a model of a real-size, HTS, non-insulated, non-planar stellarator coil and perform in Quanscient Allsolve®, a transient simulation study including modelling quench, using the $H - \varphi $ formulation. It is shown that transient model benefits heavily from the built-in Domain Decomposition Method (DDM), which allows reaching reasonable computation times. Such models become then invaluable in predicting and understanding the complex behavior of non-insulated large-scale REBCO magnets, including their intrinsic energy imbalance.
- Open Access
- 5 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-7
Transversal Thermal Conductivity of HTS Tapes: Analytical Method vs Measurements
Design of ReBCO HTS magnets requires reliable data about the tape and insulation thermal conductivities. Material properties represent one of the largest uncertainties when simulating the HTS magnet thermal behavior during magnet cooling, operation, and possible quench scenarios. In this study, we aimed to measure transversal thermal conductivity of insulated and non-insulated HTS tape stacks. Measurements were done in the vacuum of a conduction cooled cryostat. This allows near adiabatic boundary conditions. The measurement results were compared with an analytical model based on thermal conductivities from literature sources. It is noteworthy that the uncertainties associated with the tape material layer thicknesses already constitute a major uncertainty in the magnet analysis. Furthermore, we discuss the challenges, lessons learned and possible future improvements in the measurement methodology.
- 5 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-7
Open AccessTransversal Thermal Conductivity of HTS Tapes: Analytical Method vs Measurements
Design of ReBCO HTS magnets requires reliable data about the tape and insulation thermal conductivities. Material properties represent one of the largest uncertainties when simulating the HTS magnet thermal behavior during magnet cooling, operation, and possible quench scenarios. In this study, we aimed to measure transversal thermal conductivity of insulated and non-insulated HTS tape stacks. Measurements were done in the vacuum of a conduction cooled cryostat. This allows near adiabatic boundary conditions. The measurement results were compared with an analytical model based on thermal conductivities from literature sources. It is noteworthy that the uncertainties associated with the tape material layer thicknesses already constitute a major uncertainty in the magnet analysis. Furthermore, we discuss the challenges, lessons learned and possible future improvements in the measurement methodology.
- Open Access
- 26 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-6
Simulation of Strain in ReBCO Tapes Under Combined Helical-Hard-Way Bending and Critical Current Measurements
In this study, we investigate the mechanical behavior of high-temperature superconducting tapes under combined helical-hard-way bending load. The combined bending scenario is related to a helically wound solenoid where hard-way bending arises due to the connection of the tapes to the current terminals. Similar phenomena can also occur in double pancake coils due to the layer transitions. We have sought simulation methods to assess the associated mechanical strain that may lead to critical current degradation. Experimental measurements involve winding SuperOx 2G ReBCO tapes around formers with varying radii and lead angles to assess the critical current degradation resulting from combined helical-hard-way. The experimental procedure, results, and the utilized ANSYS finite element modeling approaches are presented. The strain distribution across different modeling assumptions is compared, including 2D and 3D tape models, homogenized tape material properties, and simulations accounting all tape layers individually. We evaluated the pros and cons of the presented approaches which are expected to be useful for future detailed analysis of such scenarios.
- 26 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (5) , 1-6
Open AccessSimulation of Strain in ReBCO Tapes Under Combined Helical-Hard-Way Bending and Critical Current Measurements
In this study, we investigate the mechanical behavior of high-temperature superconducting tapes under combined helical-hard-way bending load. The combined bending scenario is related to a helically wound solenoid where hard-way bending arises due to the connection of the tapes to the current terminals. Similar phenomena can also occur in double pancake coils due to the layer transitions. We have sought simulation methods to assess the associated mechanical strain that may lead to critical current degradation. Experimental measurements involve winding SuperOx 2G ReBCO tapes around formers with varying radii and lead angles to assess the critical current degradation resulting from combined helical-hard-way. The experimental procedure, results, and the utilized ANSYS finite element modeling approaches are presented. The strain distribution across different modeling assumptions is compared, including 2D and 3D tape models, homogenized tape material properties, and simulations accounting all tape layers individually. We evaluated the pros and cons of the presented approaches which are expected to be useful for future detailed analysis of such scenarios.
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Modeling Non-planar Coils in a Full-Scale Stellarator
Design and modeling of a stellarator fusion reactor is a multidisciplinary effort that requires a tight integration between simulation of highly nonlinear multi-physics and representation of non-planar complex geometries. The critical current calculation and the design of the mechanical structures are among the most crucial aspects as they set size, cost, and time to build the stellarator. Because of the asymmetric and non-planar nature of its components the modeling of such figures of merit needs to be carried out at large scale, without the possibility of taking advantage of any particular symmetry. In this work we develop a three-dimensional model for the analysis of the magnetic field and forces, necessary for such considerations, for complex coil geometries, such as stellarators, where a two-dimensional approach can not provide accurate analyses and verification of assumptions. Moreover, this method can quickly generate a large amount of critical modeling data (e.g. Lorentz load, displacement and stresses) that could be integrated into a workflow for coil design optimization based on machine learning or other recent optimization tools.
- 22 January 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 34 (3) , 1-5
Modeling Non-planar Coils in a Full-Scale Stellarator
Design and modeling of a stellarator fusion reactor is a multidisciplinary effort that requires a tight integration between simulation of highly nonlinear multi-physics and representation of non-planar complex geometries. The critical current calculation and the design of the mechanical structures are among the most crucial aspects as they set size, cost, and time to build the stellarator. Because of the asymmetric and non-planar nature of its components the modeling of such figures of merit needs to be carried out at large scale, without the possibility of taking advantage of any particular symmetry. In this work we develop a three-dimensional model for the analysis of the magnetic field and forces, necessary for such considerations, for complex coil geometries, such as stellarators, where a two-dimensional approach can not provide accurate analyses and verification of assumptions. Moreover, this method can quickly generate a large amount of critical modeling data (e.g. Lorentz load, displacement and stresses) that could be integrated into a workflow for coil design optimization based on machine learning or other recent optimization tools.
- Open Access
- 9 June 2023
- Published by Wiley in Journal of Mechanical Design
- Vol. 145 (8) , 1-27
A Dimension Selection-Based Constrained Multi-Objective Optimization Algorithm Using a Combination of Artificial Intelligence Methods
The computational cost of modern simulation-based optimization tends to be prohibitive in practice. Complex design problems often involve expensive constraints evaluated through finite element analysis or other computationally intensive procedures. To speed up the optimization process and deal with expensive constraints, a new dimension selection-based constrained multi-objective optimization (MOO) algorithm is developed combining least absolute shrinkage and selection operator (LASSO) regression, artificial neural networks, and grey wolf optimizer, named L-ANN-GWO. Instead of considering all variables at each iteration during the optimization, the proposed algorithm only adaptively retains the variables that are highly influential on the objectives. The unselected variables are adjusted to satisfy the constraints through a local search. With numerical benchmark problems and a simulation-based engineering design problem, L-ANN-GWO outperforms state-of-the-art constrained MOO algorithms. The method is then applied to solve a highly complex optimization problem, the design of a high-temperature superconducting magnet. The optimal solution shows significant improvement as compared to the baseline design.
- 9 June 2023
- Published by Wiley in Journal of Mechanical Design
- Vol. 145 (8) , 1-27
Open AccessA Dimension Selection-Based Constrained Multi-Objective Optimization Algorithm Using a Combination of Artificial Intelligence Methods
The computational cost of modern simulation-based optimization tends to be prohibitive in practice. Complex design problems often involve expensive constraints evaluated through finite element analysis or other computationally intensive procedures. To speed up the optimization process and deal with expensive constraints, a new dimension selection-based constrained multi-objective optimization (MOO) algorithm is developed combining least absolute shrinkage and selection operator (LASSO) regression, artificial neural networks, and grey wolf optimizer, named L-ANN-GWO. Instead of considering all variables at each iteration during the optimization, the proposed algorithm only adaptively retains the variables that are highly influential on the objectives. The unselected variables are adjusted to satisfy the constraints through a local search. With numerical benchmark problems and a simulation-based engineering design problem, L-ANN-GWO outperforms state-of-the-art constrained MOO algorithms. The method is then applied to solve a highly complex optimization problem, the design of a high-temperature superconducting magnet. The optimal solution shows significant improvement as compared to the baseline design.
- 27 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
Prediction of 2G HTS Tape Quench Behavior by Random Forest Model Trained on 2-D FEM Simulations
Detailed Finite Element Method (FEM) based simulations for 2G HTS tapes return high quality results, but the computation takes a long time due to the non-linearity of superconducting properties and they needed high mesh density. This work describes a method for prediction of quench behavior in a long 2G HTS tape based on a series of 2D FEM model simulations for short length of tape in many different conditions. The random forest model is trained by the set of results from the short-pieces FEM calculations. Subsequently the model can be applied to any length of HTS tape with similar thermal characteristics. Comparison of quench simulation in 10 cm long HTS tape between a detailed FEM model and a fully trained random forest model show that the predicted temperatures are within 0.68%, while the computation time is significantly faster: The random forest model ran in less than 1 s, while the run time of the FEM model was 5:30 min.
- 27 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
Prediction of 2G HTS Tape Quench Behavior by Random Forest Model Trained on 2-D FEM Simulations
Detailed Finite Element Method (FEM) based simulations for 2G HTS tapes return high quality results, but the computation takes a long time due to the non-linearity of superconducting properties and they needed high mesh density. This work describes a method for prediction of quench behavior in a long 2G HTS tape based on a series of 2D FEM model simulations for short length of tape in many different conditions. The random forest model is trained by the set of results from the short-pieces FEM calculations. Subsequently the model can be applied to any length of HTS tape with similar thermal characteristics. Comparison of quench simulation in 10 cm long HTS tape between a detailed FEM model and a fully trained random forest model show that the predicted temperatures are within 0.68%, while the computation time is significantly faster: The random forest model ran in less than 1 s, while the run time of the FEM model was 5:30 min.
- Open Access
- 6 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
Modeling Eddy Current Losses in HTS Tapes Using Multiharmonic Method
Due to the highly nonlinear electrical resistivity of high temperature superconducting (HTS) materials, computing the steady-state eddy current losses in HTS tapes, under time-periodic alternating current excitation, can be time consuming when using a time-transient method (TTM). The computation can require several periods to be solved with a small time-step. One alternative to the TTM is the multiharmonic method (MHM) where the Fourier basis is used to approximate the Maxwell fields in time. The method allows obtaining the steady-state solution to the problem with one resolution of the nonlinear problem. In this work, using the finite element method with the $H-\varphi$ formulation, the capabilities of the MHM in the computational eddy current loss modeling of HTS tapes are scrutinized and compared against the TTM.
- 6 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
Open AccessModeling Eddy Current Losses in HTS Tapes Using Multiharmonic Method
Due to the highly nonlinear electrical resistivity of high temperature superconducting (HTS) materials, computing the steady-state eddy current losses in HTS tapes, under time-periodic alternating current excitation, can be time consuming when using a time-transient method (TTM). The computation can require several periods to be solved with a small time-step. One alternative to the TTM is the multiharmonic method (MHM) where the Fourier basis is used to approximate the Maxwell fields in time. The method allows obtaining the steady-state solution to the problem with one resolution of the nonlinear problem. In this work, using the finite element method with the $H-\varphi$ formulation, the capabilities of the MHM in the computational eddy current loss modeling of HTS tapes are scrutinized and compared against the TTM.
- Open Access
$H$-$φ$ formulation in Sparselizard combined with domain decomposition methods for modeling superconducting tapes, stacks, and twisted wires
The growing interest in the modeling of superconductors has led to the development of effective numerical methods and software. One of the most utilized approaches for magnetoquasistatic simulations in applied superconductivity is the $H$ formulation. However, due to the large number of degrees of freedom (DOFs) present when modeling large and complex systems (e.g. large coils for fusion applications, electrical machines, and medical applications) using the standard $H$ formulation on a desktop machine becomes infeasible. The $H$ formulation solves the Faraday's law formulated in terms of the magnetic field intensity $\mathbf{H}$ using edge elements in the whole modeling domain. For this reason, a very high resistivity is assumed for the non-conducting domains, leading to an ill-conditioned system matrix and therefore long computation times. In contrast, the $H$-$\phi$ formulation uses the $H$ formulation in the conducting region, and the $\phi$ formulation (magnetic scalar potential) in the surrounding non-conducting domains, drastically reducing DOFs and computation time. In this work, we use the $H$-$\phi$ formulation in 2D for the magnetothermal (AC losses and quench) analysis of stacks of REBCO tapes. The same approach is extended to a 3D case for the AC loss analysis of a twisted superconducting wire. All the results obtained by simulations in Sparselizard are compared with results obtained with COMSOL. Our custom tool allows us to distribute the simulations over hundreds of CPUs using domain decomposition methods, considerably reducing the simulation times without compromising accuracy.Open Access$H$-$φ$ formulation in Sparselizard combined with domain decomposition methods for modeling superconducting tapes, stacks, and twisted wires
The growing interest in the modeling of superconductors has led to the development of effective numerical methods and software. One of the most utilized approaches for magnetoquasistatic simulations in applied superconductivity is the $H$ formulation. However, due to the large number of degrees of freedom (DOFs) present when modeling large and complex systems (e.g. large coils for fusion applications, electrical machines, and medical applications) using the standard $H$ formulation on a desktop machine becomes infeasible. The $H$ formulation solves the Faraday's law formulated in terms of the magnetic field intensity $\mathbf{H}$ using edge elements in the whole modeling domain. For this reason, a very high resistivity is assumed for the non-conducting domains, leading to an ill-conditioned system matrix and therefore long computation times. In contrast, the $H$-$\phi$ formulation uses the $H$ formulation in the conducting region, and the $\phi$ formulation (magnetic scalar potential) in the surrounding non-conducting domains, drastically reducing DOFs and computation time. In this work, we use the $H$-$\phi$ formulation in 2D for the magnetothermal (AC losses and quench) analysis of stacks of REBCO tapes. The same approach is extended to a 3D case for the AC loss analysis of a twisted superconducting wire. All the results obtained by simulations in Sparselizard are compared with results obtained with COMSOL. Our custom tool allows us to distribute the simulations over hundreds of CPUs using domain decomposition methods, considerably reducing the simulation times without compromising accuracy. - 27 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
$H$-$\phi$ Formulation in Sparselizard Combined With Domain Decomposition Methods for Modeling Superconducting Tapes, Stacks, and Twisted Wires
The growing interest in the modeling of superconductors has led to the development of effective numerical methods and software. One of the most utilized approaches for magnetoquasistatic simulations in applied superconductivity is the $H$ formulation. However, due to the large number of degrees of freedom (DOFs) present when modeling large and complex systems (e.g. large coils for fusion applications, electrical machines, and medical applications) using the standard $H$ formulation on a desktop machine becomes infeasible. The $H$ formulation solves the Faraday's law formulated in terms of the magnetic field intensity $\mathbf {H}$ using edge elements in the whole modeling domain. For this reason, a very high resistivity is assumed for the non-conducting domains, leading to an ill-conditioned system matrix and therefore long computation times. In contrast, the $H$ - $\phi$ formulation uses the $H$ formulation in the conducting region, and the $\phi$ formulation (magnetic scalar potential) in the surrounding non-conducting domains, drastically reducing DOFs and computation time. In this work, we use the $H$ - $\phi$ formulation in 2D for the magnetothermal (AC losses and quench) analysis of stacks of REBCO tapes. The same approach is extended to a 3D case for the AC loss analysis of a twisted superconducting wire. All the results obtained by simulations in Sparselizard are compared with results obtained with COMSOL. Our custom tool allows us to distribute the simulations over hundreds of CPUs using domain decomposition methods, considerably reducing the simulation times without compromising accuracy.
- 27 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-5
$H$-$\phi$ Formulation in Sparselizard Combined With Domain Decomposition Methods for Modeling Superconducting Tapes, Stacks, and Twisted Wires
The growing interest in the modeling of superconductors has led to the development of effective numerical methods and software. One of the most utilized approaches for magnetoquasistatic simulations in applied superconductivity is the $H$ formulation. However, due to the large number of degrees of freedom (DOFs) present when modeling large and complex systems (e.g. large coils for fusion applications, electrical machines, and medical applications) using the standard $H$ formulation on a desktop machine becomes infeasible. The $H$ formulation solves the Faraday's law formulated in terms of the magnetic field intensity $\mathbf {H}$ using edge elements in the whole modeling domain. For this reason, a very high resistivity is assumed for the non-conducting domains, leading to an ill-conditioned system matrix and therefore long computation times. In contrast, the $H$ - $\phi$ formulation uses the $H$ formulation in the conducting region, and the $\phi$ formulation (magnetic scalar potential) in the surrounding non-conducting domains, drastically reducing DOFs and computation time. In this work, we use the $H$ - $\phi$ formulation in 2D for the magnetothermal (AC losses and quench) analysis of stacks of REBCO tapes. The same approach is extended to a 3D case for the AC loss analysis of a twisted superconducting wire. All the results obtained by simulations in Sparselizard are compared with results obtained with COMSOL. Our custom tool allows us to distribute the simulations over hundreds of CPUs using domain decomposition methods, considerably reducing the simulation times without compromising accuracy.