Yudong Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yudong Xie has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
Yong Wang
School of Mechanical Engineering, Shandong University
10 shared publications- Yong Wang
School of Mechanical Engineering, Shandong University, Jingshi Road 17923, Jinan 250061, China
8 shared publications Guangchao Zhang
School of Mechanical Engineering, Shandong University
6 shared publications- Jiazhen Han
School of Mechanical Engineering, Shandong University, Jingshi Road 17923, Jinan 250061, China
6 shared publications Jiazhen Han
4 shared publications- Zilei Ji
School of Mechanical Engineering, Shandong University, Jingshi Road 17923, Jinan 250061, China
4 shared publications
Latest Publications
- Open Access
Research on Control and Energy Efficiency Characteristics of Electro-Hydraulic Actuators for Servo Deep Drawing Dies
Improving energy efficiency while maintaining accurate force and displacement control is a key requirement for servo deep-drawing die-cushion systems. Electro-hydraulic actuators (EHAs), which combine the high power density of hydraulic transmission with the controllability of electric drives, provide an effective approach for improving the dynamic performance and energy efficiency of metal-forming equipment. This paper investigates the control and energy-efficiency characteristics of an EHA applied to a servo deep-drawing die-cushion system, with particular emphasis on the working mechanism of its hydraulic system, the AMESim-Simulink co-simulation control strategy, and the energy-efficiency distribution characteristics. Firstly, an electro-hydrostatic actuator (EHA) model composed of a permanent magnet synchronous motor, a fixed-displacement pump, valve block unit, accumulator, and single-rod double-acting hydraulic cylinder is established. The power flow relationship of the system in the four-quadrant working condition is analyzed, and the flow distribution characteristics of the main oil circuit, supplementary oil circuit, and bypass branch are studied. Secondly, a joint simulation platform is built based on AMESim and Simulink to achieve bidirectional coupling between the hydraulic actuator and the motor drive control system. In the speed control loop, the traditional PI and fuzzy PI control strategies are compared; in the position control loop, the PID control and sliding mode control strategies are simulated and analyzed. The results show that the fuzzy PI control has better dynamic regulation ability under load torque and speed step change conditions, which can reduce speed overshoot and shorten the regulation process; the position-control results under a step-displacement command show that the sliding-mode controller improves the transient response and steady-state tracking accuracy compared with the conventional PID controller. Finally, the system’s four-quadrant energy efficiency, motor efficiency, pump volumetric efficiency, and mechanical efficiency are analyzed from the perspective of energy conversion. The results show that the system efficiency is affected by load, actuator speed, motor speed, and pump pressure difference, and the efficient working area is mainly distributed in the medium-high speed and moderate load range.
Open AccessResearch on Control and Energy Efficiency Characteristics of Electro-Hydraulic Actuators for Servo Deep Drawing Dies
Improving energy efficiency while maintaining accurate force and displacement control is a key requirement for servo deep-drawing die-cushion systems. Electro-hydraulic actuators (EHAs), which combine the high power density of hydraulic transmission with the controllability of electric drives, provide an effective approach for improving the dynamic performance and energy efficiency of metal-forming equipment. This paper investigates the control and energy-efficiency characteristics of an EHA applied to a servo deep-drawing die-cushion system, with particular emphasis on the working mechanism of its hydraulic system, the AMESim-Simulink co-simulation control strategy, and the energy-efficiency distribution characteristics. Firstly, an electro-hydrostatic actuator (EHA) model composed of a permanent magnet synchronous motor, a fixed-displacement pump, valve block unit, accumulator, and single-rod double-acting hydraulic cylinder is established. The power flow relationship of the system in the four-quadrant working condition is analyzed, and the flow distribution characteristics of the main oil circuit, supplementary oil circuit, and bypass branch are studied. Secondly, a joint simulation platform is built based on AMESim and Simulink to achieve bidirectional coupling between the hydraulic actuator and the motor drive control system. In the speed control loop, the traditional PI and fuzzy PI control strategies are compared; in the position control loop, the PID control and sliding mode control strategies are simulated and analyzed. The results show that the fuzzy PI control has better dynamic regulation ability under load torque and speed step change conditions, which can reduce speed overshoot and shorten the regulation process; the position-control results under a step-displacement command show that the sliding-mode controller improves the transient response and steady-state tracking accuracy compared with the conventional PID controller. Finally, the system’s four-quadrant energy efficiency, motor efficiency, pump volumetric efficiency, and mechanical efficiency are analyzed from the perspective of energy conversion. The results show that the system efficiency is affected by load, actuator speed, motor speed, and pump pressure difference, and the efficient working area is mainly distributed in the medium-high speed and moderate load range.
- Open Access
- 15 September 2026
- Published by Frontiers Media SA in Frontiers in Marine Science
- Vol. 13, 1880285
Synergistic performance study on energy harvesting and fluid regulation of fish spine wing bionic impeller ball valve
Leakage of long-distance subsea oil and gas pipelines severely endangers marine ecosystems, and unstable power for online monitoring hinders leakage early warning and emergency response. To tackle power shortages for pipelines in deep, polar and high-pressure marine environments and eliminate waste of excess pipeline fluid energy via pressure reducing valves, this paper proposes an innovative fish spine wing bionic impeller energy-harvesting ball valve combining bionic fluid mechanics and mechanical design theories. The impeller adopts a circumferential arrangement with three blades in one group. The blade profile perfectly replicates the streamlined characteristics of dynamic fluid coupling of fish dorsal ridges, breaking the single-curved surface design limitation of traditional impellers. By reconstructing the blade curvature distribution, the coordinated optimization of flow field adaptability and energy harvesting efficiency is realized. Based on CFD numerical simulation, combined with the dynamic mesh method and the SST k-ω turbulence model, the effects of valve opening, tip speed ratio, blade arc angle and helix angle on the comprehensive performance of the energy-harvesting ball valve are systematically investigated, and a comparative analysis with the conventional Savonius impeller is carried out. The results demonstrate that the fish spine wing bionic impeller is capable of improving the flow field distribution inside the valve and reducing turbulent energy loss. Under the optimal tip speed ratio, its peak shaft power reaches 130 W, which is 36.8% higher than that of the conventional impeller. The overall performance is optimal at a blade arc angle of 120° and a helix angle of 0°. Within the full valve opening range of 13%–100%, the bionic impeller outperforms the conventional impeller in both energy harvesting characteristic and flow regulation stability. This design provides efficient and reliable core equipment for surplus energy recovery of intelligent pipeline networks. The bionic structure optimization concept and the design method of variable blade arc angle and helix angle offer a new reference for the performance improvement of fluid machinery, and also provide an efficient and feasible technical scheme for surplus energy recycling in intelligent pipe networks.
- 15 September 2026
- Published by Frontiers Media SA in Frontiers in Marine Science
- Vol. 13, 1880285
Open AccessSynergistic performance study on energy harvesting and fluid regulation of fish spine wing bionic impeller ball valve
Leakage of long-distance subsea oil and gas pipelines severely endangers marine ecosystems, and unstable power for online monitoring hinders leakage early warning and emergency response. To tackle power shortages for pipelines in deep, polar and high-pressure marine environments and eliminate waste of excess pipeline fluid energy via pressure reducing valves, this paper proposes an innovative fish spine wing bionic impeller energy-harvesting ball valve combining bionic fluid mechanics and mechanical design theories. The impeller adopts a circumferential arrangement with three blades in one group. The blade profile perfectly replicates the streamlined characteristics of dynamic fluid coupling of fish dorsal ridges, breaking the single-curved surface design limitation of traditional impellers. By reconstructing the blade curvature distribution, the coordinated optimization of flow field adaptability and energy harvesting efficiency is realized. Based on CFD numerical simulation, combined with the dynamic mesh method and the SST k-ω turbulence model, the effects of valve opening, tip speed ratio, blade arc angle and helix angle on the comprehensive performance of the energy-harvesting ball valve are systematically investigated, and a comparative analysis with the conventional Savonius impeller is carried out. The results demonstrate that the fish spine wing bionic impeller is capable of improving the flow field distribution inside the valve and reducing turbulent energy loss. Under the optimal tip speed ratio, its peak shaft power reaches 130 W, which is 36.8% higher than that of the conventional impeller. The overall performance is optimal at a blade arc angle of 120° and a helix angle of 0°. Within the full valve opening range of 13%–100%, the bionic impeller outperforms the conventional impeller in both energy harvesting characteristic and flow regulation stability. This design provides efficient and reliable core equipment for surplus energy recovery of intelligent pipeline networks. The bionic structure optimization concept and the design method of variable blade arc angle and helix angle offer a new reference for the performance improvement of fluid machinery, and also provide an efficient and feasible technical scheme for surplus energy recycling in intelligent pipe networks.
- Open Access
- 11 September 2026
- Published by Frontiers Media SA in Frontiers in Marine Science
- Vol. 13, 1833656
Multi parameter coupling analysis for performance enhancement of self powered control valve
Once a leakage occurs in pipelines, it can easily lead to severe ecological disasters. To achieve rapid emergency response and minimize the resulting hazards, it is urgent to address the core challenge of stable power supply for pipeline networks in remote off-grid environments. Control valves are widely used in pipe network systems (e.g., hydraulic stretching pad, oil and gas transmission pipelines). A viable solution lies in generating electricity by harvesting fluid energy in pipelines via integrating runners into inherent valves (termed self-powered control valve or green valve). Runners are characterized by numerous structural parameters. A comprehensive investigation into the potential interactions among these parameters and the extent to which each parameter and its interactions influence performance is imperative for achieving optimal structural performance. In this paper, the effects of multiple parameters (blade shape, number of blades, and blocking ratio) and their interactions on the two main characteristics of the self-powered control valve fluid regulation and energy harvesting are investigated based on the orthogonal experimental method and the primary and secondary factors affecting the performance are identified. The results show that blade shape and blocking ratio have a greater effect on performance than the number of blades; there is a strong interaction between blade shape and the number of blades, which affects the energy harvesting performance, so different blade shapes correspond to different optimal numbers of blades; and the interaction between blocking ratio and the other two parameters is small.
- 11 September 2026
- Published by Frontiers Media SA in Frontiers in Marine Science
- Vol. 13, 1833656
Open AccessMulti parameter coupling analysis for performance enhancement of self powered control valve
Once a leakage occurs in pipelines, it can easily lead to severe ecological disasters. To achieve rapid emergency response and minimize the resulting hazards, it is urgent to address the core challenge of stable power supply for pipeline networks in remote off-grid environments. Control valves are widely used in pipe network systems (e.g., hydraulic stretching pad, oil and gas transmission pipelines). A viable solution lies in generating electricity by harvesting fluid energy in pipelines via integrating runners into inherent valves (termed self-powered control valve or green valve). Runners are characterized by numerous structural parameters. A comprehensive investigation into the potential interactions among these parameters and the extent to which each parameter and its interactions influence performance is imperative for achieving optimal structural performance. In this paper, the effects of multiple parameters (blade shape, number of blades, and blocking ratio) and their interactions on the two main characteristics of the self-powered control valve fluid regulation and energy harvesting are investigated based on the orthogonal experimental method and the primary and secondary factors affecting the performance are identified. The results show that blade shape and blocking ratio have a greater effect on performance than the number of blades; there is a strong interaction between blade shape and the number of blades, which affects the energy harvesting performance, so different blade shapes correspond to different optimal numbers of blades; and the interaction between blocking ratio and the other two parameters is small.
- Open Access
Design of a Granular Media-Adaptable Bionic-Inspired Reconfigurable Foot Based on EDEM–Adams Coupling Simulation
The foot structure plays a decisive role in the trafficability of legged robots on granular media. Traditional foot-ends (spherical, cylindrical, flat-bottomed) are prone to sinkage and slippage, resulting in unstable locomotion. To solve this problem, a novel bionic-inspired reconfigurable foot with active opening and closing adjustment capability is designed based on bionics, combining the stable phalangeal contour of goat hoof capsules and the high-adhesion feature of beetle foot-end spines. A coupled EDEM–Adams simulation model is established, and physical experiments combined with simulation inversion are used to calibrate contact parameters between particles and between particles and the foot, including the coefficient of restitution, static friction and rolling friction. A high-fidelity numerical platform for foot–ground dynamic interaction is thus constructed. By comparing and analyzing the differences in anti-sinkage and traction performance between the bionic-inspired foot and traditional foot-ends, this study systematically revealed the influence law of bionic morphology on the mechanical behavior of the foot, and clarified the intrinsic mechanism through which bionic design improves foot–ground interaction. The results demonstrate that the spine structures of the bionic-inspired foot reshape the mechanical constitutive relationship of granular media. By expanding the ground contact area and optimizing contact pressure distribution, the maximum reduction in foot sinkage depth reaches 70.11%, and the traction coefficient is increased by up to 37.13%.
Open AccessDesign of a Granular Media-Adaptable Bionic-Inspired Reconfigurable Foot Based on EDEM–Adams Coupling Simulation
The foot structure plays a decisive role in the trafficability of legged robots on granular media. Traditional foot-ends (spherical, cylindrical, flat-bottomed) are prone to sinkage and slippage, resulting in unstable locomotion. To solve this problem, a novel bionic-inspired reconfigurable foot with active opening and closing adjustment capability is designed based on bionics, combining the stable phalangeal contour of goat hoof capsules and the high-adhesion feature of beetle foot-end spines. A coupled EDEM–Adams simulation model is established, and physical experiments combined with simulation inversion are used to calibrate contact parameters between particles and between particles and the foot, including the coefficient of restitution, static friction and rolling friction. A high-fidelity numerical platform for foot–ground dynamic interaction is thus constructed. By comparing and analyzing the differences in anti-sinkage and traction performance between the bionic-inspired foot and traditional foot-ends, this study systematically revealed the influence law of bionic morphology on the mechanical behavior of the foot, and clarified the intrinsic mechanism through which bionic design improves foot–ground interaction. The results demonstrate that the spine structures of the bionic-inspired foot reshape the mechanical constitutive relationship of granular media. By expanding the ground contact area and optimizing contact pressure distribution, the maximum reduction in foot sinkage depth reaches 70.11%, and the traction coefficient is increased by up to 37.13%.
- Open Access
Study on Hydrodynamic Characteristics of a New Type of Cartridge-Type Locking Valve
As a core safety component in the hydraulic system of CNC stretching pads, the safety locking valve undertakes precise stamping position maintenance and emergency braking protection; its performance dictates the hydraulic system’s operational stability. Existing ones induce hydraulic oil volume dynamic changes during opening/closing, significantly affecting blank holder force control. To solve this, its structure is innovatively optimized. Based on the CFD method, a dynamic calculation framework integrating unsteady flow characteristics and structural motion characteristics has been constructed, realizing accurate simulation research on the dynamic characteristics of the safety locking valve. Through simulation analysis, the distribution law of the internal flow field during the transient opening and closing process of the locking valve has been thoroughly explored, the distribution mechanism of the transient flow field has been systematically revealed, and finally, the fluid regulation characteristic parameters of the safety locking valve have been obtained, providing an important theoretical basis for subsequent engineering applications.
Open AccessStudy on Hydrodynamic Characteristics of a New Type of Cartridge-Type Locking Valve
As a core safety component in the hydraulic system of CNC stretching pads, the safety locking valve undertakes precise stamping position maintenance and emergency braking protection; its performance dictates the hydraulic system’s operational stability. Existing ones induce hydraulic oil volume dynamic changes during opening/closing, significantly affecting blank holder force control. To solve this, its structure is innovatively optimized. Based on the CFD method, a dynamic calculation framework integrating unsteady flow characteristics and structural motion characteristics has been constructed, realizing accurate simulation research on the dynamic characteristics of the safety locking valve. Through simulation analysis, the distribution law of the internal flow field during the transient opening and closing process of the locking valve has been thoroughly explored, the distribution mechanism of the transient flow field has been systematically revealed, and finally, the fluid regulation characteristic parameters of the safety locking valve have been obtained, providing an important theoretical basis for subsequent engineering applications.
- Open Access
Research on Dual-Motor Redundant Compensation for Unstable Fluid Load of Control Valves
Control valves are widely applied in nuclear power, offshore oil/gas extraction, and chemical engineering, but suffer from issues like pressure oscillation, flow control accuracy degradation, and motor overload due to unstable fluid loads (e.g., nuclear reactions in power plants and complex marine climates). This paper proposes a dual-motor redundant compensation method to address these challenges. The core lies in a control strategy where a single main motor drives the valve under normal conditions, while a redundant motor intervenes when load torque exceeds a preset threshold—calculated via the valve core’s fluid load model. By introducing excess load torque as positive feedback to the current loop, the method coordinates torque output between the two motors. AMESim and Matlab/Simulink joint simulations compare single-motor non-compensation, single-motor compensation, and dual-motor schemes. Results show that under inlet pressure step changes, the dual-motor compensation scheme shortens the stabilization time of the valve’s controlled variable by 40%, reduces overshoot by 65%, and decreases motor torque fluctuation by 50%. This redundant design enhances fault tolerance, providing a novel approach for reliability enhancement of deep-sea oil/gas control valves.
Open AccessResearch on Dual-Motor Redundant Compensation for Unstable Fluid Load of Control Valves
Control valves are widely applied in nuclear power, offshore oil/gas extraction, and chemical engineering, but suffer from issues like pressure oscillation, flow control accuracy degradation, and motor overload due to unstable fluid loads (e.g., nuclear reactions in power plants and complex marine climates). This paper proposes a dual-motor redundant compensation method to address these challenges. The core lies in a control strategy where a single main motor drives the valve under normal conditions, while a redundant motor intervenes when load torque exceeds a preset threshold—calculated via the valve core’s fluid load model. By introducing excess load torque as positive feedback to the current loop, the method coordinates torque output between the two motors. AMESim and Matlab/Simulink joint simulations compare single-motor non-compensation, single-motor compensation, and dual-motor schemes. Results show that under inlet pressure step changes, the dual-motor compensation scheme shortens the stabilization time of the valve’s controlled variable by 40%, reduces overshoot by 65%, and decreases motor torque fluctuation by 50%. This redundant design enhances fault tolerance, providing a novel approach for reliability enhancement of deep-sea oil/gas control valves.
- Open Access
Three-Dimensional Modified Cross-Section Hydrofoil Design and Performance Study
To improve the hydrodynamic performance of hydrofoils, this study combines the shape characteristics of flat and elliptical wings, uses parabolic function to fit the leading and trailing edges of hydrofoils, introduces the cross-section coefficient λ to characterize the cross-sectional size of hydrofoils along the spreading direction, and designs five hydrofoils with different cross-sections. The motion of the hydrofoil is simulated using the finite element analysis software Fluent to obtain the hydrodynamic performance curve of the hydrofoil and analyze the effect of different end face sizes on the performance of the hydrofoil. The results show that compared with the flat wing, the peak drag of the variable section hydrofoil with λ = 0.5 is reduced by 9.3%, the pitching moment is reduced by 23.1%, and the average power is raised by 17.4%. If the appropriate reduction in the cross-section coefficient is too small, it will exacerbate the wing tip vortex shedding, the hydrofoil surface pressure will be too concentrated, and the hydrofoil motion stability will be reduced. The lift coefficient, drag coefficient, and pitching moment coefficient of the hydrofoil are positively correlated with the cross-section coefficient λ, and positively correlated with the motion frequency.
Open AccessThree-Dimensional Modified Cross-Section Hydrofoil Design and Performance Study
To improve the hydrodynamic performance of hydrofoils, this study combines the shape characteristics of flat and elliptical wings, uses parabolic function to fit the leading and trailing edges of hydrofoils, introduces the cross-section coefficient λ to characterize the cross-sectional size of hydrofoils along the spreading direction, and designs five hydrofoils with different cross-sections. The motion of the hydrofoil is simulated using the finite element analysis software Fluent to obtain the hydrodynamic performance curve of the hydrofoil and analyze the effect of different end face sizes on the performance of the hydrofoil. The results show that compared with the flat wing, the peak drag of the variable section hydrofoil with λ = 0.5 is reduced by 9.3%, the pitching moment is reduced by 23.1%, and the average power is raised by 17.4%. If the appropriate reduction in the cross-section coefficient is too small, it will exacerbate the wing tip vortex shedding, the hydrofoil surface pressure will be too concentrated, and the hydrofoil motion stability will be reduced. The lift coefficient, drag coefficient, and pitching moment coefficient of the hydrofoil are positively correlated with the cross-section coefficient λ, and positively correlated with the motion frequency.
- Open Access
Structural Optimization and Fluid–Structure Interaction Analysis of a Novel High-Speed Switching Control Valve
Laver fluffy is an indispensable link in the processing of laver products. After fluffing, the laver acquires an appealing color, which is conducive to better marketability. During the primary mechanical processing of laver, a valve capable of rapid opening and closing is required to ensure that the laver’s surface becomes fluffy and lustrous post-processing. However, valve products that can meet the specific requirements of laver fluffing are scarce. This study proposes a novel principle for a high-speed switching control valve. This valve can quickly turn on or cut off the high-pressure gas path during laver processing while also taking into account the response speed and service life. The structure and principle of the new control valve were introduced. Different flow field models in the valve were designed, and their flow characteristics and flow field performance under various schemes were compared and discussed by using Fluent. Subsequently, an optimized control valve structure model was proposed. Based on this, a strength analysis of the control valve was conducted via fluid–structure interaction, revealing the response characteristics of the valve under the working state. The results indicate that, when different cone angles and bell shapes were selected for the upper chamber inlet of the control valve, the number and intensity of vortices in the upper chamber can be reduced. The height of the upper chamber affected the formation of the throttle between the top and bottom surfaces of the upper chamber. When the height of the upper chamber was 32 mm, the energy loss in the upper chamber remains basically stable. Simultaneously changing the inlet shape and height of the upper chamber can effectively prevent the throttle formed by the height of the upper chamber, which was conducive to increasing the valve outlet flow rate. Through the analysis of the flow field with different valve chamber structures, the improved control valve adopted the bell-shaped inlet, with an upper chamber height of 32 mm and curved transition for the internal flow channel. Compared to the original fluid domain, when the opening was 100%, the outlet flow rate of the 10° conical tube and bell-shaped inlet increased by 12.77% and 12.59%, respectively. The outlet flow rate at the curved transition position rose by 15.35%, and the outlet flow of the improved control valve increased by 32.70%. When the control valve was operating under a preload pressure of 1 MPa, at 20% opening, the maximum equivalent stress of the valve body was 52.51 MPa, and the total deformation was 12.56 microns. When the preload pressure exceeded 1.5 MPa, the equivalent stress and total deformation of the control valve body and T-shaped valve stem exhibited an upward trend with further increases in the preload pressure.
Open AccessStructural Optimization and Fluid–Structure Interaction Analysis of a Novel High-Speed Switching Control Valve
Laver fluffy is an indispensable link in the processing of laver products. After fluffing, the laver acquires an appealing color, which is conducive to better marketability. During the primary mechanical processing of laver, a valve capable of rapid opening and closing is required to ensure that the laver’s surface becomes fluffy and lustrous post-processing. However, valve products that can meet the specific requirements of laver fluffing are scarce. This study proposes a novel principle for a high-speed switching control valve. This valve can quickly turn on or cut off the high-pressure gas path during laver processing while also taking into account the response speed and service life. The structure and principle of the new control valve were introduced. Different flow field models in the valve were designed, and their flow characteristics and flow field performance under various schemes were compared and discussed by using Fluent. Subsequently, an optimized control valve structure model was proposed. Based on this, a strength analysis of the control valve was conducted via fluid–structure interaction, revealing the response characteristics of the valve under the working state. The results indicate that, when different cone angles and bell shapes were selected for the upper chamber inlet of the control valve, the number and intensity of vortices in the upper chamber can be reduced. The height of the upper chamber affected the formation of the throttle between the top and bottom surfaces of the upper chamber. When the height of the upper chamber was 32 mm, the energy loss in the upper chamber remains basically stable. Simultaneously changing the inlet shape and height of the upper chamber can effectively prevent the throttle formed by the height of the upper chamber, which was conducive to increasing the valve outlet flow rate. Through the analysis of the flow field with different valve chamber structures, the improved control valve adopted the bell-shaped inlet, with an upper chamber height of 32 mm and curved transition for the internal flow channel. Compared to the original fluid domain, when the opening was 100%, the outlet flow rate of the 10° conical tube and bell-shaped inlet increased by 12.77% and 12.59%, respectively. The outlet flow rate at the curved transition position rose by 15.35%, and the outlet flow of the improved control valve increased by 32.70%. When the control valve was operating under a preload pressure of 1 MPa, at 20% opening, the maximum equivalent stress of the valve body was 52.51 MPa, and the total deformation was 12.56 microns. When the preload pressure exceeded 1.5 MPa, the equivalent stress and total deformation of the control valve body and T-shaped valve stem exhibited an upward trend with further increases in the preload pressure.