Vasyl Lukach
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vasyl Lukach has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Alvian Kuzmych
Institute of Mechanics and Automation of Agro-Industrial Production of the National Academy of Agrarian Sciences of Ukraine
3 shared publications - Roman Kalinichenko
National University of Life and Environmental Sciences of Ukraine
3 shared publications - Serhii Stepanenko
Institute of Mechanics and Automation of Agro-Industrial Production, National Academy of Agrarian Sciences of Ukraine
3 shared publications Volodymyr Vasylyuk
National University of Life and Environmental Sciences of Ukraine
3 shared publications- Mykola Ikalchyk
National University of Life and Environmental Sciences of Ukraine
2 shared publications Separated Subdivision of the National University of Life and Environmental Sciences of Ukraine “Nizhin Agrotechnical Institute”
2 shared publications
Latest Publications
- 30 June 2026
- Published by Lviv University of Business and Law in Academic Visions
- No. 56
The Role of National-Patriotic Education in the Formation of an Agricultural Specialist
The article substantiates the role of national-patriotic education as an integral component of the professional training of future specialists in the agricultural sector. The relevance of the study stems from the need to combine professional education, civic development, and the formation of a nationally conscious personality amid contemporary social challenges and the conditions of martial law. The aim of the paper is to substantiate the role of national-patriotic education in the formation of an agricultural specialist, to determine the pedagogical potential of the museum complex of a higher education institution as a modern educational environment, and to reveal the practical mechanisms of its implementation in accordance with the requirements of the Law of Ukraine "On Higher Education". The methodological basis comprises general scientific and special methods: analysis, synthesis, generalization, and systematization of legal acts and scholarly sources; the comparative method for juxtaposing domestic and foreign approaches; the structural-functional method; and the generalization of the pedagogical experience of the Museum Complex of the Nizhyn Agrotechnical Institute. The study relates the domestic concept of national-patriotic education to international approaches to citizenship education, in particular the Council of Europe Charter on Education for Democratic Citizenship and Human Rights Education, the Reference Framework of Competences for Democratic Culture, and the guidelines of the OECD Learning Compass 2030. It is demonstrated that national-patriotic education should be regarded as a systematic and continuous process integrated into the educational, scientific, upbringing, cultural-outreach, and project-based activities of a higher education institution. The museum complex is shown to perform educational, scientific, cultural-outreach, communication, and value-worldview functions, fostering civic responsibility, national identity, historical memory, and the professional identity of students. The practical significance is confirmed by the generalization of the experience of the Museum Complex of the Nizhyn Agrotechnical Institute as a modern educational, research, cultural-outreach, and communication center whose activities ensure the development of general and professional competencies and the achievement of intended learning outcomes. The proposed approaches can be applied in organizing national-patriotic education at agricultural higher education institutions.
- 30 June 2026
- Published by Lviv University of Business and Law in Academic Visions
- No. 56
The Role of National-Patriotic Education in the Formation of an Agricultural Specialist
The article substantiates the role of national-patriotic education as an integral component of the professional training of future specialists in the agricultural sector. The relevance of the study stems from the need to combine professional education, civic development, and the formation of a nationally conscious personality amid contemporary social challenges and the conditions of martial law. The aim of the paper is to substantiate the role of national-patriotic education in the formation of an agricultural specialist, to determine the pedagogical potential of the museum complex of a higher education institution as a modern educational environment, and to reveal the practical mechanisms of its implementation in accordance with the requirements of the Law of Ukraine "On Higher Education". The methodological basis comprises general scientific and special methods: analysis, synthesis, generalization, and systematization of legal acts and scholarly sources; the comparative method for juxtaposing domestic and foreign approaches; the structural-functional method; and the generalization of the pedagogical experience of the Museum Complex of the Nizhyn Agrotechnical Institute. The study relates the domestic concept of national-patriotic education to international approaches to citizenship education, in particular the Council of Europe Charter on Education for Democratic Citizenship and Human Rights Education, the Reference Framework of Competences for Democratic Culture, and the guidelines of the OECD Learning Compass 2030. It is demonstrated that national-patriotic education should be regarded as a systematic and continuous process integrated into the educational, scientific, upbringing, cultural-outreach, and project-based activities of a higher education institution. The museum complex is shown to perform educational, scientific, cultural-outreach, communication, and value-worldview functions, fostering civic responsibility, national identity, historical memory, and the professional identity of students. The practical significance is confirmed by the generalization of the experience of the Museum Complex of the Nizhyn Agrotechnical Institute as a modern educational, research, cultural-outreach, and communication center whose activities ensure the development of general and professional competencies and the achievement of intended learning outcomes. The proposed approaches can be applied in organizing national-patriotic education at agricultural higher education institutions.
- Open Access
- 29 April 2026
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 13 (1) , G20
Pattern Identification and Modeling of Energy-Efficient Operating Modes in Grain Micronization
The article addresses the critical issue of improving the energy efficiency of grain processing using thermo-radiation micronization. The research aims to substantiate energy-efficient processing modes that ensure increased equipment productivity while simultaneously reducing specific energy consumption. To achieve this goal, an improved mathematical model that describes complex heat and moisture transfer processes in grain during intensive infrared (IR) irradiation was developed. Based on direct experimental data, the model’s parameters were identified, enabling adaptation to real-world production conditions. The article proposes a simplified mathematical description of the patterns of raw material heating and dehydration suitable for engineering calculations. Special attention was paid to the analysis and modeling of oscillating modes, which involved alternating IR irradiation with periods of grain cooling by airflow. It was also demonstrated that such an approach allows for intensifying moisture removal without overheating the product. The research results provide a basis for implementing the oscillating mode as cyclic-pulse irradiation with intermediate forced cooling. This approach is the most effective, as it ensures moisture removal with 20–30 % less energy consumption and reduces surface overheating compared to continuous IR irradiation.
- 29 April 2026
- Published by Sumy State University in Journal of Engineering Sciences
- Vol. 13 (1) , G20
Open AccessPattern Identification and Modeling of Energy-Efficient Operating Modes in Grain Micronization
The article addresses the critical issue of improving the energy efficiency of grain processing using thermo-radiation micronization. The research aims to substantiate energy-efficient processing modes that ensure increased equipment productivity while simultaneously reducing specific energy consumption. To achieve this goal, an improved mathematical model that describes complex heat and moisture transfer processes in grain during intensive infrared (IR) irradiation was developed. Based on direct experimental data, the model’s parameters were identified, enabling adaptation to real-world production conditions. The article proposes a simplified mathematical description of the patterns of raw material heating and dehydration suitable for engineering calculations. Special attention was paid to the analysis and modeling of oscillating modes, which involved alternating IR irradiation with periods of grain cooling by airflow. It was also demonstrated that such an approach allows for intensifying moisture removal without overheating the product. The research results provide a basis for implementing the oscillating mode as cyclic-pulse irradiation with intermediate forced cooling. This approach is the most effective, as it ensures moisture removal with 20–30 % less energy consumption and reduces surface overheating compared to continuous IR irradiation.
- Open Access
- 30 September 2025
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 15 (3) , 29-32
Implementation of energy-saving modes for electro-radiation drying of oil-containing material using automation tools
For industrial processing of oil-containing plant material, it is necessary to reduce its moisture content to 6–8%. The use of convective, energy-intensive dryers for drying seeds to low moisture levels is inefficient. The aim of the work is to improve the mathematical description of dynamic modes of grain drying in infrared energy supply systems and, based on this, to develop an automatic control system. The main method of researching the static and dynamic characteristics of the grain processing process using infrared radiation is the analytical method followed by experimental verification of the obtained mathematical description. To intensify the process of achieving the desired moisture content of the raw material, it is proposed to use contactless heating with infrared radiation. In this case, the issue of preventing overheating and scorching of the material is resolved by using vibration transportation with particle mixing and automating surface temperature control and its stabilization by adjusting the movement speed. Based on the dependencies, it can be concluded that an increase in the temperature of the grain due to distributed power input enhances the intensity of heating and stabilizes the temperature of the grain material. This leads to a reduction in the time required for the development of moisture gradients within individual grains and speeds up the evaporation of moisture from the surface of the grains. The paper clarifies the mathematical model of thermal processes of infrared processing of oilseeds, on the basis of which an automatic control system was developed for the implementation of energy-saving grain drying modes. The research results showed that the introduction of an automated infrared drying mode allows for a reduction in specific energy consumption by 30-40%.
- 30 September 2025
- Published by Politechnika Lubelska in Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
- Vol. 15 (3) , 29-32
Open AccessImplementation of energy-saving modes for electro-radiation drying of oil-containing material using automation tools
For industrial processing of oil-containing plant material, it is necessary to reduce its moisture content to 6–8%. The use of convective, energy-intensive dryers for drying seeds to low moisture levels is inefficient. The aim of the work is to improve the mathematical description of dynamic modes of grain drying in infrared energy supply systems and, based on this, to develop an automatic control system. The main method of researching the static and dynamic characteristics of the grain processing process using infrared radiation is the analytical method followed by experimental verification of the obtained mathematical description. To intensify the process of achieving the desired moisture content of the raw material, it is proposed to use contactless heating with infrared radiation. In this case, the issue of preventing overheating and scorching of the material is resolved by using vibration transportation with particle mixing and automating surface temperature control and its stabilization by adjusting the movement speed. Based on the dependencies, it can be concluded that an increase in the temperature of the grain due to distributed power input enhances the intensity of heating and stabilizes the temperature of the grain material. This leads to a reduction in the time required for the development of moisture gradients within individual grains and speeds up the evaporation of moisture from the surface of the grains. The paper clarifies the mathematical model of thermal processes of infrared processing of oilseeds, on the basis of which an automatic control system was developed for the implementation of energy-saving grain drying modes. The research results showed that the introduction of an automated infrared drying mode allows for a reduction in specific energy consumption by 30-40%.
- 1 August 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (8) , 162-165
Study of the rotary cleaners of the holes of cylindrical sieves on a vibrocentrifugal separator
This document presents the results of research into the process of cleaning the holes of the vibrocentrifugal separator cylindrical sieves with rotary cleaners. The study of the nature of the movement of rotary sieve cleaners was carried out using electrooscillography methods. An original recording device with a sensor system was developed, which ensured the determination of the speed of the cylindrical sieve and the movement of the rotary cleaners of the sieve holes. The efficiency of the separator was confirmed experimentally
- 1 August 2024
- Published by Wydawnictwo SIGMA-NOT, sp. z.o.o. in PRZEGLĄD ELEKTROTECHNICZNY
- Vol. 1 (8) , 162-165
Study of the rotary cleaners of the holes of cylindrical sieves on a vibrocentrifugal separator
This document presents the results of research into the process of cleaning the holes of the vibrocentrifugal separator cylindrical sieves with rotary cleaners. The study of the nature of the movement of rotary sieve cleaners was carried out using electrooscillography methods. An original recording device with a sensor system was developed, which ensured the determination of the speed of the cylindrical sieve and the movement of the rotary cleaners of the sieve holes. The efficiency of the separator was confirmed experimentally
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
IMPROVEMENT OF GRAIN TRANSPORTATION TECHNOLOGY FROM COMBINES
The article provides a rationale for an improved technological process for transporting grain from grain combines (ЗK) by a semi-trailer dump truck (НП) in an aggregate with a tractor and a saddle trailer. One of the main reserves for increasing the productivity of a combine is to increase the utilization factor of its shift time by using transshipment technology based on interoperation compensators – tractor trailers for reloaders of the PBN-30, PBN-40, PBN-50 brands, etc. and heavy vehicles (AT), in the body which grain is being reloaded outside the field. The lack of technology is significant downtime of vehicles. A comparative analysis of various technological schemes for the operation of the (ЗK) and vehicles showed that the minimum specific duration of harvesting and transport operations is achieved by using a tractor with a tractor to work in the field, subject to the minimum time spent on the formation (uncoupling, hitching) of transport units using a fifth wheel coupling device, which fitted with a trailer. At the same time, vehicles are used as negotiable (НП)s, which makes it possible to organize the continuous operation of tractors in the sections “ЗК – edge of the field” and “edge of the field – grain receiving point”, where possible downtime of the AT is replaced by downtime only of the НП. We have proposed a technical solution containing a temporary redistribution of the mass of grain in the body of the НП by loading it into the front part of the body. At the same time, the rear wheels of the НП are partially unloaded and do not over-compact the soil, and the rolling semi-trailer, equipped with wide-profile low-pressure tires, perceives additional load without significant soil compaction. The theoretical analysis of the rhythm of the processes of grain movement by individual technological links of the harvesting and transport complex made it possible to determine the analytical dependences of the main parameters of these links on the productivity of the grain combine and the volume of its bunker, the nominal load capacity of the НП, the duration of the НП recoupling, the distance of grain transportation, the average technical speed of the tractor and the car. The use of semi-shuttle transporters operating in two stages: in the field and on the road, provides a 1.5-fold increase in the productivity (average output) of the AT, and also eliminates the cost of specialized reloading trailers and double reloading of grain.
- 29 December 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 315 (6(1))
IMPROVEMENT OF GRAIN TRANSPORTATION TECHNOLOGY FROM COMBINES
The article provides a rationale for an improved technological process for transporting grain from grain combines (ЗK) by a semi-trailer dump truck (НП) in an aggregate with a tractor and a saddle trailer. One of the main reserves for increasing the productivity of a combine is to increase the utilization factor of its shift time by using transshipment technology based on interoperation compensators – tractor trailers for reloaders of the PBN-30, PBN-40, PBN-50 brands, etc. and heavy vehicles (AT), in the body which grain is being reloaded outside the field. The lack of technology is significant downtime of vehicles. A comparative analysis of various technological schemes for the operation of the (ЗK) and vehicles showed that the minimum specific duration of harvesting and transport operations is achieved by using a tractor with a tractor to work in the field, subject to the minimum time spent on the formation (uncoupling, hitching) of transport units using a fifth wheel coupling device, which fitted with a trailer. At the same time, vehicles are used as negotiable (НП)s, which makes it possible to organize the continuous operation of tractors in the sections “ЗК – edge of the field” and “edge of the field – grain receiving point”, where possible downtime of the AT is replaced by downtime only of the НП. We have proposed a technical solution containing a temporary redistribution of the mass of grain in the body of the НП by loading it into the front part of the body. At the same time, the rear wheels of the НП are partially unloaded and do not over-compact the soil, and the rolling semi-trailer, equipped with wide-profile low-pressure tires, perceives additional load without significant soil compaction. The theoretical analysis of the rhythm of the processes of grain movement by individual technological links of the harvesting and transport complex made it possible to determine the analytical dependences of the main parameters of these links on the productivity of the grain combine and the volume of its bunker, the nominal load capacity of the НП, the duration of the НП recoupling, the distance of grain transportation, the average technical speed of the tractor and the car. The use of semi-shuttle transporters operating in two stages: in the field and on the road, provides a 1.5-fold increase in the productivity (average output) of the AT, and also eliminates the cost of specialized reloading trailers and double reloading of grain.
- 27 October 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 313 (5)
IMPROVEMENT OF GRAIN TRANSPORTATION TECHNOLOGY FROM COMBINES
The article provides a rationale for an improved technological process for transporting grain from grain combines (ЗK) by a semi-trailer dump truck (НП) in an aggregate with a tractor and a saddle trailer. One of the main reserves for increasing the productivity of a combine is to increase the utilization factor of its shift time by using transshipment technology based on interoperation compensators – tractor trailers for reloaders of the PBN-30, PBN-40, PBN-50 brands, etc. and heavy vehicles (AT), in the body which grain is being reloaded outside the field. The lack of technology is significant downtime of vehicles. A comparative analysis of various technological schemes for the operation of the (ЗK) and vehicles showed that the minimum specific duration of harvesting and transport operations is achieved by using a tractor with a tractor to work in the field, subject to the minimum time spent on the formation (uncoupling, hitching) of transport units using a fifth wheel coupling device, which fitted with a trailer. At the same time, vehicles are used as negotiable (НП)s, which makes it possible to organize the continuous operation of tractors in the sections “ЗК – edge of the field” and “edge of the field – grain receiving point”, where possible downtime of the AT is replaced by downtime only of the НП. We have proposed a technical solution containing a temporary redistribution of the mass of grain in the body of the НП by loading it into the front part of the body. At the same time, the rear wheels of the НП are partially unloaded and do not over-compact the soil, and the rolling semi-trailer, equipped with wide-profile low-pressure tires, perceives additional load without significant soil compaction. The theoretical analysis of the rhythm of the processes of grain movement by individual technological links of the harvesting and transport complex made it possible to determine the analytical dependences of the main parameters of these links on the productivity of the grain combine and the volume of its bunker, the nominal load capacity of the НП, the duration of the НП recoupling, the distance of grain transportation, the average technical speed of the tractor and the car. The use of semi-shuttle transporters operating in two stages: in the field and on the road, provides a 1.5-fold increase in the productivity (average output) of the AT, and also eliminates the cost of specialized reloading trailers and double reloading of grain.
- 27 October 2022
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 313 (5)
IMPROVEMENT OF GRAIN TRANSPORTATION TECHNOLOGY FROM COMBINES
The article provides a rationale for an improved technological process for transporting grain from grain combines (ЗK) by a semi-trailer dump truck (НП) in an aggregate with a tractor and a saddle trailer. One of the main reserves for increasing the productivity of a combine is to increase the utilization factor of its shift time by using transshipment technology based on interoperation compensators – tractor trailers for reloaders of the PBN-30, PBN-40, PBN-50 brands, etc. and heavy vehicles (AT), in the body which grain is being reloaded outside the field. The lack of technology is significant downtime of vehicles. A comparative analysis of various technological schemes for the operation of the (ЗK) and vehicles showed that the minimum specific duration of harvesting and transport operations is achieved by using a tractor with a tractor to work in the field, subject to the minimum time spent on the formation (uncoupling, hitching) of transport units using a fifth wheel coupling device, which fitted with a trailer. At the same time, vehicles are used as negotiable (НП)s, which makes it possible to organize the continuous operation of tractors in the sections “ЗК – edge of the field” and “edge of the field – grain receiving point”, where possible downtime of the AT is replaced by downtime only of the НП. We have proposed a technical solution containing a temporary redistribution of the mass of grain in the body of the НП by loading it into the front part of the body. At the same time, the rear wheels of the НП are partially unloaded and do not over-compact the soil, and the rolling semi-trailer, equipped with wide-profile low-pressure tires, perceives additional load without significant soil compaction. The theoretical analysis of the rhythm of the processes of grain movement by individual technological links of the harvesting and transport complex made it possible to determine the analytical dependences of the main parameters of these links on the productivity of the grain combine and the volume of its bunker, the nominal load capacity of the НП, the duration of the НП recoupling, the distance of grain transportation, the average technical speed of the tractor and the car. The use of semi-shuttle transporters operating in two stages: in the field and on the road, provides a 1.5-fold increase in the productivity (average output) of the AT, and also eliminates the cost of specialized reloading trailers and double reloading of grain.