XHXiangguang Han

Xiangguang Han

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xiangguang Han has a total of 82 co-authors. Here are the top co-authors by number of shared publications:

  • Libo Zhao

    School of Instrument Science and Technology, Xi’an Jiaotong University, Xi’an, China

    14 shared publications
  • Ping Yang

    State Key Laboratory for Manufacturing Systems Engineering, State Industry-Education Integration Center for Medical Innovations, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies, Shaanxi Innovation Center for Special Sensing and Testing Technology in Extreme Environments, Shaanxi Provincial University Engineering Research Center for Micro/Nano Acoustic Devices and Intelligent Systems, Xi'an Jiaotong University, Xi'an, 710049, China

    6 shared publications
  • Yong Xia

    State Key Laboratory for Manufacturing Systems Engineering, State Industry-Education Integration Center for Medical Innovations, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies, Shaanxi Innovation Center for Special Sensing and Testing Technology in Extreme Environments, Shaanxi Provincial University Engineering Research Center for Micro/Nano Acoustic Devices and Intelligent Systems, Xi'an Jiaotong University 1 , Xi'an 710049

    5 shared publications
  • Ping Yang

    The State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies, Xi’an Jiaotong University, Xi’an 710049, China

    4 shared publications
  • Yong Xia

    State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies, Xi’an Jiaotong University (Yantai) Research Institute for Intelligent Sensing Technology and System, Xi’an Jiaotong University, Xi’an, China

    4 shared publications
  • Yang Lv

    Zhuzhou CRRC Times Electric Co. LTD, Zhuzhou, 412001, China

    3 shared publications

Latest Publications

  • Open Access

    Development of a novel radially-distributed spiral bilayer thermopile infrared sensor with enhanced responsivity

    by Yong Xia, Xinyao Meng, Yang Lv, Xiangguang Han, Yiwei Tang, Wanli Jiang, Dehui Xu, Dejiang Lu, Weixuan Jing, Ping Yang, et al.

    Current trend of pursuing higher resolution in uncooled cost-effective infrared imagers demands thermopile sensing units with higher responsivity. Conventional designs often have limitations such as non-uniform temperature distribution among individual thermocouple legs or complex fabrication process, which limit further responsivity improvement. Here, a novel thermopile featuring a radially-distributed spiral structure with bilayer P-poly/Al thermocouples is proposed. The radially distributed legs along with the circular membrane effectively improve the temperature uniformity among individual thermocouples. Meanwhile, the spiral bilayer configuration decreases thermal conductance and increases the thermocouple number simultaneously, resulting in a significant enhancement of the responsivity. The spiral parameter was designed and optimized, and the fabricated sensors were characterized and compared with conventional non-spiral thermopiles. Experimental results demonstrate a responsivity of 52.53 V/W and a specific detectivity of 9.76 × 107 cm·Hz1/2·W-1 for the proposed sensor, representing a 39.35% and 17.81% enhancement over the 37.70 V/W and 8.29 × 107 cm·Hz1/2·W-1 achieved by the non-spiral counterpart. With its high responsivity and CMOS-compatible fabrication, the proposed thermopile offers a cost-effective solution for next-generation, high-resolution infrared imagers.


  • An Inverse Capacitance Differential Equation-Based Six-Axis Force/Torque Sensor for the High-Accuracy Decoupling of Complex Multi-Axis Loads

    by Renjie Tan, Libo Zhao, Yong Xia, Xiangguang Han, Linya Huang, Wendi Gao, Ping Yang, Chen Jia, Wei Li, Zhixia Qiao, et al.

    Currently, space-variable, capacitive multi-axis force/torque sensors have limited detection accuracy in the measurement of complex multi-axis loads owing to their inherent nonlinearity and coupling errors in full range. The nonlinearity and coupling of the conventional capacitance differential equation were experimentally verified for a pre-developed space-variable capacitive six-axis force/torque sensing chip. An inverse capacitance differential decoupling equation was practically applied to the chip to suppress the inherent nonlinearity and coupling errors in full range (2.5 N and 12.5 N·mm) under multi-axis loads. The results of complex multi-axis coupled loading tests align with the theoretical analysis. When the inverse decoupling equation is adopted, the maximum nonlinearities of 18.59%FS (Full Scale) and coupling errors of 254.1%FS for the conventional equation can be reduced to 1.05%FS and 10.90%FS, respectively. The efficient decoupling structure combined with the inverse capacitance differential equation can provide critical theoretical guidance for developing high-accuracy capacitive multi-axis force/torque sensors.


  • Open Access

    Study on the ohmic contact characteristics based on TiN barrier layers

    by Zhou Shi, Shengqi Wang, Xiangguang Han, Jiuhong Wang

    This paper investigates the failure mechanism of conventional Si-Ti-Pt-Au electrodes in high-temperature pressure sensors above 400°C, caused by metal electrode diffusion. Experimental findings reveal that platinum (Pt) reacts with silicon (Si) to form PtSi, depleting the Pt layer and compromising its barrier function. Concurrently, composite crystals involving titanium (Ti) form, ultimately leading to metal diffusion failure. To address the Pt’s inability to function as an effective barrier layer at elevated temperatures, a low-resistance, high-barrier-efficiency B-type titanium nitride (TiN) film was deposited between Ti and Pt via reactive magnetron sputtering. The diffusion phenomenon at elevated temperatures was significantly improved in the optimized Si-Ti-TiN-Pt-Au electrode. When the thicknesses of the metal layers are respectively Ti-80nm, TiN-50nm, Pt-60nm, and Au-300nm, the specific contact resistivity decreased to 2.13×10 −6 Ω·cm 2 after annealing at 500°C for 30 minutes, while exhibiting excellent stability. This study provides an effective solution for enhancing the reliability of ohmic contacts in high-temperature sensors.

  • Simultaneous Enhancement of Sensitivity, Resonant Frequency, and Overload Capability of Piezoresistive Accelerometers by Heavily-Doped Fillet Structures on Sensing Beams

    by Yong Xia, Tao Wang, Yang Lv, Xiangguang Han, Mingzhi Yu, Renjie Tan, Mimi Huang, Chen Jia, Libo Zhao, Lin Sun, et al.

    High sensitivity, high natural frequency, and high overload capability are desired for accelerometers used in industrial applications, but simultaneously enhancing all is challenging. Here, via designing novel heavily-doped fillet structures, we prove the sensitivity, resonant frequency, and overload capability can be simultaneously enhanced. The enhancements are attributed to regulations of stress concentration and effective sensing regions by the heavily-doped fillets. The sensors with and without fillets are designed, fabricated, packaged, and tested. The results show a sensitivity of 0.31 ± 0.02 mV/g at 5 V, a natural frequency of 37.87 ± 2.09 kHz, and an overload of 10040.17 ± 531.76 g for sensors with 10- $\mu $ m fillets, which are superior to 0.27 ± 0.01 mV/g at 5 V, 34.13 ± 0.90 kHz, and 7368.55 ± 843.92 g for those no-fillet counterparts. In addition, the developed sensor further exhibited feasibility in air-bearing vibration monitoring. The proposed design is envisioned to give insights into the novel designs of high-performance stress-based sensors, including accelerometers, pressure sensors, and strain gauges.


  • High Performance Novel High-g Piezoresistive Micro-Accelerometer With MHz Natural Frequency

    by Yang Lv, Shaolong Xu, Xiaowei Hou, Mingzhi Yu, Qunxin Liu, Libo Zhao, Cun Li, Xiangguang Han, Dan Liu, Jingfeng Xiong

    High-g accelerometers are the core devices for high-impact signal measurement, and microelectromechanical systems (MEMS) piezoresistive accelerometers, as the mainstream technological solution for high-g accelerometers, have serious mutual constraints on their sensitivity and natural frequency. In order to overcome the above problems, this paper proposed a MEMS accelerometer with a range of 100000g based on the pure axial deformation of piezoresistive beam. While ensuring the natural frequency of the accelerometer, the natural frequency of the sensor is substantially increased. Moreover, the structure does not require complex theoretical calculations to realize the pure axial stress state, which greatly simplifies the design process. The test results show that the proposed accelerometer has a natural frequency greater than 1 MHz and a sensitivity of 2.47 μV/g/5V, which indicates that the proposed accelerometer has high performance and can meet the needs in the field of high-impact signal measurement.


  • Open Access

    Miniaturized silicon-based capacitive six-axis force/torque sensor with large range, high sensitivity, and low crosstalk

    by Renjie Tan, Yong Xia, Xiangguang Han, Linya Huang, Wendi Gao, Chen Jia, Ping Yang, Qijing Lin, Shujiang Ding, Chenying Wang, et al.

    Miniaturized six-axis force/torque sensors have potential applications in robotic tactile sensing, minimally invasive surgery, and other narrow operating spaces, where currently available commercial sensors cannot meet the requirements because of their large size. In this study, a silicon-based capacitive six-axis force/torque sensing chip with a small size of 9.3 × 9.3 × 0.98 mm was designed, fabricated, and tested. A sandwich decoupling structure with a symmetrical layered arrangement of S-shaped beams, comb capacitors, and parallel capacitors was employed. A decoupling theory considering eccentricity and nonlinear effects was derived to realize low axial crosstalk. The proposed S-shaped beams achieved a large measurement range through stress optimization. The results of a coupled multiphysics field finite-element simulation agreed well with those of theoretical analyses. The test results show that the proposed sensing chip can detect six-axis force/torque separately, with all crosstalk errors less than 2.59%FS. Its force and torque measurement ranges can reach as much as 2.5 N and 12.5 N·mm, respectively. The sensing chip also has high sensitivities of 0.52 pF/N and 0.27 pF/(N·mm) for force and torque detection, respectively.


  • Open Access

    Novel miniaturized silicon-based capacitive six-axis force/torque sensor with large range, high sensitivity, and low crosstalk

    by Xiangguang Han, Renjie Tan, Daixuan Wu, Yong Xia, Linya Huang, Wendi Gao, Chen Jia, Ping Yang, Qijing Lin, Shujiang Ding, et al.

    Miniaturized six-axis force/torque sensors have potential applications in robotic tactile sensing, minimally invasive surgery, and other narrow operating spaces, where currently available commercial sensors cannot meet the requirements because of their large size. In this study, a silicon-based capacitive six-axis force/torque sensing chip with a small size of 9.3 × 9.3 × 0.98 mm was designed, fabricated, and tested. A sandwich decoupling structure with a symmetrical layered arrangement of S-shaped beams, comb capacitors, and parallel capacitors was employed. A decoupling theory considering eccentricity and nonlinear effects was derived to realize low axial crosstalk. The proposed S-shaped beams achieved a large measurement range through stress optimization. The results of a coupled multiphysics field finite-element simulation agreed well with those of theoretical analyses. The test results show that the proposed sensing chip can detect six-axis force/torque separately, with almost all crosstalk errors less than 6%FS. Its force and torque measurement ranges can reach as much as 2.5 N and 12.5 N·mm, respectively. The sensing chip also has high sensitivities of 0.52 pF/N and 0.27 pF/(N·mm) for force and torque detection, respectively.

  • Open Access

    Small-size temperature/high-pressure integrated sensor via flip-chip method

    by Mimi Huang, Xiaoyu Wu, Libo Zhao, Xiangguang Han, Yong Xia, Yi Gao, Zeyu Cui, Cheng Zhang, Xiaokai Yang, Zhixia Qiao, et al.

    Hydraulic technology with smaller sizes and higher reliability trends, including fault prediction and intelligent control, requires high-performance temperature and pressure-integrated sensors. Current designs rely on planar wafer- or chip-level integration, which is limited by pressure range, chip size, and low reliability. We propose a small-size temperature/high-pressure integrated sensor via the flip-chip technique. The pressure and temperature units are arranged vertically, and the sensing signals of the two units are integrated into one plane through silicon vias and gold–gold bonding, reducing the lateral size and improving the efficiency of signal transmission. The flip-chip technique ensures a reliable electrical connection. A square diaphragm with rounded corners is designed and optimised with simulation to sense high pressure based on the piezoresistive effect. The temperature sensing unit with a thin-film platinum resistor measures temperature and provides back-end high-precision compensation, which will improve the precision of the pressure unit. The integrated chip is fabricated by MEMS technology and packaged to fabricate the extremely small integrated sensor. The integrated sensor is characterised, and the pressure sensor exhibits a sensitivity and sensitivity drift of 7.97 mV/MPa and −0.19% FS in the range of 0–20 MPa and −40 to 120 °C. The linearity, hysteresis, repeatability, accuracy, basic error, and zero-time drift are 0.16% FS, 0.04% FS, 0.06% FS, 0.18% FS, ±0.23% FS and 0.04% FS, respectively. The measurement error of the temperature sensor and temperature coefficient of resistance is less than ±1 °C and 3142.997 ppm/°C, respectively. The integrated sensor has broad applicability in fault diagnosis and safety monitoring of high-end equipment such as automobile detection, industrial equipment, and oil drilling platforms.


  • Design and Fabrication of a MEMS Temperature and Pressure Integrated Sensor With Back-Inlet Package Structure

    by Mimi Huang, Xiangguang Han, Libo Zhao, Shu Fan, Yong Xia, Zhixia Qiao, Wei Li, Yi Gao, Ping Yang, Shuai Chen, et al.

    Sensor research is currently focused on integration, downsizing, and lightweightness to satisfy the demands of high-end equipment for intelligence, so we design a MEMS integrated sensor. This paper describes the design of a MEMS temperature and pressure integrated sensor with a back-inlet packaging. Glass slurry sintered back-inlet packaging is used to increase the sensor’s dielectric compatibility and connection strength. The ideal size is established after simulating and optimizing the chip’s major dimensions. Processes including laser welding, sintering, and MEMS fabrication technology finish the packing and preparation of the sensor chip. The encapsulated structure can withstand a 30 MPa pressure test. Finally, the pressure unit exhibits a sensitivity and sensitivity drift of 5.536 mV/MPa and -0.1900%FS in the range of 0-15 MPa and -40-120 °C, respectively. The linearity, hysteresis, repeatability, basic error, accuracy and zero-time drift are 0.2094%FS, 0.1987%FS, 0.1885%FS, ±0.4507%FS, 0.3244%FS and 0.1985%FS, respectively, and the measurement error of the temperature unit is less than ±0.61 °C.