YXYong Xia

Yong Xia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yong Xia has a total of 74 co-authors. Here are the top co-authors by number of shared publications:

  • Libo Zhao

    School of Instrument Science and Technology, Xi’an Jiaotong University, Xi’an, China

    7 shared publications
  • Xiangguang Han

    School of Instrument Science and Technology, Xian Jiaotong University, Xian, China

    5 shared publications
  • Ping Yang

    4 shared publications
  • Yang Lv

    4 shared publications
  • Chen Jia

    State Key Laboratory for Manufacturing Systems Engineering, State Industry-Education Integration Center for Medical Innovations, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies, Shaanxi Innovation Center for Special Sensing and Testing Technology in Extreme Environments, Shaanxi Provincial University Engineering Research Center for Micro/Nano Acoustic Devices and Intelligent Systems, Xi'an Jiaotong University 1 , Xi'an 710049

    3 shared publications
  • Libo Zhao

    3 shared publications

Latest Publications

  • Open Access

    Development of a piezoresistive accelerometer with both high natural frequency and superior overload capability

    by Yong Xia, Xinyao Meng, Yang Lv, Xiangguang Han, Zhixia Qiao, Mingzhi Yu, Chen Jia, Qing Zhang, Ping Yang, Dejiang Lu, et al.


  • Concurrent enhancement of thermopile responsivity and response speed via thermocouple number and multi-dielectric layer engineering

    by Yong Xia, Yiwei Tang, Xiangguang Han, Chen Jia, Wanli Jiang, Dehui Xu, Jiuhong Wang, Weixuan Jing, Dejiang Lu, Libo Zhao

    Fast response and high-sensitivity are both required for thermopiles used in real-time non-contact temperature monitoring. However, as a thermal detector, the response speed of a thermopile is often subject to a trade-off with its sensitivity. Existing solutions, such as combining small sensing structures, high-infrared-absorption materials, and high-Seebeck-coefficient thermoelectric materials, have challenges in complex design and CMOS compatibility. Here, we report a new design strategy that concurrently enhances responsivity and response speed by engineering the number of thermocouples and SiO2/SiNx multi-dielectric layers, with little added complexity or cost. The fabricated sensor with 90 thermocouple pairs and two pairs of SiO2/SiNx layers achieves a response time of 27.30 ms, and a responsivity of 71.76 V/W, which is 9.12% and 119.58% enhancement, respectively, compared to the reference sensor with 45 thermocouple pairs and a single pair of SiO2/SiNx layers (30.05 ms, 32.68 V/W). Simulation and experimental results reveal that the increased number of thermocouples enhances both thermal conductance and cumulative voltage signal, while the two-pair multi-dielectric layers improve infrared absorption. This work demonstrates that engineering both thermocouple number and multi-dielectric layers is a simple, CMOS-compatible and cost-effective way to concurrently enhance response speed and sensitivity. This design strategy is a promising route for developing high-performance photo-thermo-electric devices.

  • Open Access

    Development of a novel radially-distributed spiral bilayer thermopile infrared sensor with enhanced responsivity

    by Yong Xia, Xinyao Meng, Yang Lv, Xiangguang Han, Yiwei Tang, Wanli Jiang, Dehui Xu, Dejiang Lu, Weixuan Jing, Ping Yang, et al.

    Current trend of pursuing higher resolution in uncooled cost-effective infrared imagers demands thermopile sensing units with higher responsivity. Conventional designs often have limitations such as non-uniform temperature distribution among individual thermocouple legs or complex fabrication process, which limit further responsivity improvement. Here, a novel thermopile featuring a radially-distributed spiral structure with bilayer P-poly/Al thermocouples is proposed. The radially distributed legs along with the circular membrane effectively improve the temperature uniformity among individual thermocouples. Meanwhile, the spiral bilayer configuration decreases thermal conductance and increases the thermocouple number simultaneously, resulting in a significant enhancement of the responsivity. The spiral parameter was designed and optimized, and the fabricated sensors were characterized and compared with conventional non-spiral thermopiles. Experimental results demonstrate a responsivity of 52.53 V/W and a specific detectivity of 9.76 × 107 cm·Hz1/2·W-1 for the proposed sensor, representing a 39.35% and 17.81% enhancement over the 37.70 V/W and 8.29 × 107 cm·Hz1/2·W-1 achieved by the non-spiral counterpart. With its high responsivity and CMOS-compatible fabrication, the proposed thermopile offers a cost-effective solution for next-generation, high-resolution infrared imagers.


  • An Inverse Capacitance Differential Equation-Based Six-Axis Force/Torque Sensor for the High-Accuracy Decoupling of Complex Multi-Axis Loads

    by Renjie Tan, Libo Zhao, Yong Xia, Xiangguang Han, Linya Huang, Wendi Gao, Ping Yang, Chen Jia, Wei Li, Zhixia Qiao, et al.

    Currently, space-variable, capacitive multi-axis force/torque sensors have limited detection accuracy in the measurement of complex multi-axis loads owing to their inherent nonlinearity and coupling errors in full range. The nonlinearity and coupling of the conventional capacitance differential equation were experimentally verified for a pre-developed space-variable capacitive six-axis force/torque sensing chip. An inverse capacitance differential decoupling equation was practically applied to the chip to suppress the inherent nonlinearity and coupling errors in full range (2.5 N and 12.5 N·mm) under multi-axis loads. The results of complex multi-axis coupled loading tests align with the theoretical analysis. When the inverse decoupling equation is adopted, the maximum nonlinearities of 18.59%FS (Full Scale) and coupling errors of 254.1%FS for the conventional equation can be reduced to 1.05%FS and 10.90%FS, respectively. The efficient decoupling structure combined with the inverse capacitance differential equation can provide critical theoretical guidance for developing high-accuracy capacitive multi-axis force/torque sensors.


  • High linearity and low crosstalk decoupling equation for a capacitive six degrees of freedom motion sensor

    by Renjie Tan, Libo Zhao, Yong Xia, Xiangguang Han, Chen Jia, Mimi Huang, Yi Gao, Yang Zhao, Chenying Wang, Ping Yang, et al.


  • Simultaneous Enhancement of Sensitivity, Resonant Frequency, and Overload Capability of Piezoresistive Accelerometers by Heavily-Doped Fillet Structures on Sensing Beams

    by Yong Xia, Tao Wang, Yang Lv, Xiangguang Han, Mingzhi Yu, Renjie Tan, Mimi Huang, Chen Jia, Libo Zhao, Lin Sun, et al.

    High sensitivity, high natural frequency, and high overload capability are desired for accelerometers used in industrial applications, but simultaneously enhancing all is challenging. Here, via designing novel heavily-doped fillet structures, we prove the sensitivity, resonant frequency, and overload capability can be simultaneously enhanced. The enhancements are attributed to regulations of stress concentration and effective sensing regions by the heavily-doped fillets. The sensors with and without fillets are designed, fabricated, packaged, and tested. The results show a sensitivity of 0.31 ± 0.02 mV/g at 5 V, a natural frequency of 37.87 ± 2.09 kHz, and an overload of 10040.17 ± 531.76 g for sensors with 10- $\mu $ m fillets, which are superior to 0.27 ± 0.01 mV/g at 5 V, 34.13 ± 0.90 kHz, and 7368.55 ± 843.92 g for those no-fillet counterparts. In addition, the developed sensor further exhibited feasibility in air-bearing vibration monitoring. The proposed design is envisioned to give insights into the novel designs of high-performance stress-based sensors, including accelerometers, pressure sensors, and strain gauges.


  • Synergistic effects of Pd single atoms and nanoclusters boosting SnO2 gas sensing performance

    by Yaprak Ozbakir, Yong Xia, Aifei Pan, Jiyun Hong, Jorge E. Perez-Aguilar, Simon R. Bare, Francesca Rossi, Rohan Dhall, Afnan Ali Alghannam, Nishit Goel, et al.

    SnO2-supported Pd single atoms coupled with small cluster structures, incorporated into sensing platforms, exhibit exceptional performance and selectivity toward CO.


  • Open Access

    Small-size temperature/high-pressure integrated sensor via flip-chip method

    by Mimi Huang, Xiaoyu Wu, Libo Zhao, Xiangguang Han, Yong Xia, Yi Gao, Zeyu Cui, Cheng Zhang, Xiaokai Yang, Zhixia Qiao, et al.

    Hydraulic technology with smaller sizes and higher reliability trends, including fault prediction and intelligent control, requires high-performance temperature and pressure-integrated sensors. Current designs rely on planar wafer- or chip-level integration, which is limited by pressure range, chip size, and low reliability. We propose a small-size temperature/high-pressure integrated sensor via the flip-chip technique. The pressure and temperature units are arranged vertically, and the sensing signals of the two units are integrated into one plane through silicon vias and gold–gold bonding, reducing the lateral size and improving the efficiency of signal transmission. The flip-chip technique ensures a reliable electrical connection. A square diaphragm with rounded corners is designed and optimised with simulation to sense high pressure based on the piezoresistive effect. The temperature sensing unit with a thin-film platinum resistor measures temperature and provides back-end high-precision compensation, which will improve the precision of the pressure unit. The integrated chip is fabricated by MEMS technology and packaged to fabricate the extremely small integrated sensor. The integrated sensor is characterised, and the pressure sensor exhibits a sensitivity and sensitivity drift of 7.97 mV/MPa and −0.19% FS in the range of 0–20 MPa and −40 to 120 °C. The linearity, hysteresis, repeatability, accuracy, basic error, and zero-time drift are 0.16% FS, 0.04% FS, 0.06% FS, 0.18% FS, ±0.23% FS and 0.04% FS, respectively. The measurement error of the temperature sensor and temperature coefficient of resistance is less than ±1 °C and 3142.997 ppm/°C, respectively. The integrated sensor has broad applicability in fault diagnosis and safety monitoring of high-end equipment such as automobile detection, industrial equipment, and oil drilling platforms.


  • An Inductive Sensor With a Biased Magnetic Field to Distinguish Wear Debris by Magnetism and Conductivity

    by Zheng Yuan, Song Feng, Yongliang Wang, Xiangguang Han, Yong Xia, Weixuan Jing, Libo Zhao, Zhikang Li, Zhuangde Jiang

    Inductive wear debris sensors are an indispensable tool for real-time wear monitoring. Traditionally, these sensors contain only one type of magnetic field, time harmonic or static, and so cannot avoid the contradiction between magnetization and eddy current, resulting in limited performance. In this article, a detection method based on the biased magnetic fields is proposed for the first time, which can surpass this limitation in the traditional sensors. By coupling high-gradient biased static and high-frequency time-harmonic fields, the proposed sensor has the capability to enhance the precision of detecting both magnetic and nonmagnetic conductive particles simultaneously. In the following, the corresponding detection principle and mathematical model are presented, and relevant simulations are provided. Theoretical and simulation analysis illustrates the principle behind and the advantage of our work. Moreover, a signal processing system is developed to support the sensor testing. Experiments with different particle sizes and materials are carried out. The proposed sensor can identify a 50 μm copper particle and a 50 μm iron particle within a 4 mm diameter pipe, and the induction signal is linear with the volume of wear debris. The proposed method offers a new idea for inductive wear debris sensing, with great potential for higher accuracy and wider application scenarios.