YWYuanchao Wu

Yuanchao Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yuanchao Wu has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated System for Wireless Power Transfer and Auxiliary Charging of High-Voltage and Low-Voltage Batteries in Electric Vehicles

    by Yiming Zhang, Wei Xu, Chao Liu, Ronghuan Xie, Xiaoying Chen, Xiangpeng Cheng, Xingkui Mao, Yuanchao Wu

    Wireless Power Transfer (WPT) technology can be used to charge the high-voltage (HV) power battery of electric vehicles (EVs), while the low-voltage (LV) auxiliary battery is charged via a separate auxiliary power module (APM). Maintaining two distinct charging systems leads to increased costs, bulkier designs, and added weight for the EV. This study introduces a novel integrated architecture that combines the WPT and APM systems by sharing key components. A compact pickup coil is integrated into the receiving coil of the APM, enabling it to directly draw power from the WPT system. This innovative approach allows the DC/AC converter, compensation network, and receiving coil to serve dual purposes, supporting both WPT and APM functionalities. Moreover, it enables power transfer from the HV side to the LV side while the EV is in motion. The system achieves a significant reduction in weight and size while boosting the overall power density of the EV charging infrastructure. A prototype was developed and tested to verify the feasibility of the proposed design. This integrated solution offers a more compact, efficient, and cost-effective approach to EV charging.

  • A Dual-Channel Wireless Charging System With Strong Anti-Misalignment Capability for Single or Dual Automated Guided Vehicle

    by Yuanchao Wu, Io-Wa Iam, Zongrui Yang, Zhicong Huang, Chi-Seng Lam

    Wireless charging systems (WCSs) offer significant advantages over traditional plug-in charging for automated guided vehicles (AGVs). This article proposes a novel WCS featuring strong anti-misalignment capability and dual constant voltage (CV) outputs for simultaneous charging of power and auxiliary batteries in AGVs. It employs a distributed solenoid coil topology with a T-shaped equivalent circuit to achieve robust performance under misalignment conditions. The key innovation lies in maintaining a constant difference between self-inductance and mutual inductance, which ensures stable output voltage despite positional variations. The distributed solenoid coil design effectively minimizes the difference of inductance fluctuations during horizontal misalignment, while the output voltage can be dynamically regulated to match battery charging requirements. Furthermore, the system demonstrates great practical functions by supporting simultaneous charging of two AGVs without requiring larger transmitter dimensions, and the receiver design also maintains compatibility with double-D (DD) coil transmitters. An experimental platform has been established to confirm the system’s robust performance. With the solenoid coil transmitter, the maximum output voltage fluctuation remains within 4.81% across a horizontal misalignment range of 0–150 mm (50% of transmitter coil width). Similar performance (2.71% fluctuation) is achieved with DD coil transmitters. The system also exhibits strong tolerance to vertical (Z-direction) misalignment.

  • Integrating WCS, OBC, and APM Systems in Electric Vehicle Charging Systems Based on Multiwinding Couplers and Multifrequency Operation

    by Wei Xu, Yuanchao Wu, Ronghuan Xie, Yizhan Zhuang, Xingkui Mao, Yiming Zhang

    The rapid development of electric vehicles (EVs) has put forward higher requirements for charging technologies. The high-voltage (HV) and low-voltage (LV) batteries in the EV can be charged in a conductive or wireless way, leading to multiple charging systems. In this article, an integrated EV charging system is proposed by combining the functions of the wireless charging system (WCS), the on-board charger (OBC), and the auxiliary power module (APM). The system can switch among different charging modes with different working frequencies to meet the charging needs in different situations. Both the HV and LV batteries can be charged wirelessly or conductively. The mathematical models of the integrated charging systems of WCS, OBC, and APM are established. The experimental results have verified the effectiveness of the proposed integrated charging system.


  • An Integrated Charger of Wireless Power Transfer, Onboard Charger, and Auxiliary Power Module for Electric Vehicles

    by Yuanchao Wu, Wenbin Pan, Wei Xu, Ronghuan Xie, Yizhan Zhuang, Xingkui Mao, Yiming Zhang

    The rapidly developing electric vehicles (EVs) calls for improvement in the charging system for the high-voltage (HV) and low-voltage (LV) batteries in EVs. In the conventional EV charger, wireless power transfer (WPT), onboard charger (OBC), and auxiliary power module (APM) are three separate structures. This article proposes an integrated charger for WPT, OBC, and APM by sharing power conversion stages with the advantages of cost effectiveness and high-power density. The transformer of OBC can be seen as two strongly coupled coils, and the secondary-side coil can be loosely coupled with the transmitting coil of the WPT system, serving as a receiving coil. A transformer can be employed on the receiving side to integrate the APM with WPT. In this way, the receiving coil, the compensation network, and the power electronics converter can be shared. The integrated structure can work in three modes. In the first mode (wireless charging mode) and the second mode (conductive charging mode), the utility delivers power to the HV and LV batteries simultaneously. In the third mode (HV-LV mode), the LV battery is charged by the HV battery through APM. An experimental prototype is implemented to validate the proposal.


  • Blind-Zone-Free Metal Object Detection System for Wireless EV Charging System Employing Strip Multipolar Detection Coils

    by Hui Wang, Yingyao Zheng, Yicheng Zhou, Yuanchao Wu, Wenbin Pan, Zhiwei Shen, Xiaoying Chen, Xingkui Mao, Yiming Zhang

    A common and urgent problem in electric vehicle wireless charging technology is the accidental entry of metal objects into the charging area where there is no direct physical contact. Eddy currents can be induced in the metal objects, generating a large amount of heat and potentially leading to serious consequences such as fire. The current commercially applied metal object detection technology has the problems of low detection sensitivity, affecting the power transmission magnetic field, and the existence of blind zones. In view of these shortcomings, a metal object detection system for wireless charging of electric vehicles is proposed in this paper. Long strip detection coils are designed and placed above the transmitter coil. Each strip detection coil is composed of 16 unipolar coils having alternating polarities, which can realize decoupling between the detection coil and the transmitter coil and eliminate the interference to the magnetic field of the wireless power transmission system. A third-order Sallen-Key high pass filter and a proportional amplifier circuit are used to improve the sensitivity and accuracy of metal object detection. Finally, an experimental platform of metal object detection for electric vehicle wireless charging is built, and the proposed system can detect the existence of metal objects sensitively and accurately at the location where they may exist.


  • A Stable Dynamic Electric Vehicle Wireless Charging System Based on Triple Decoupling Receiving Coils and a Novel Triple-Diode Rectifier

    by Hangyan Zhou, Zhiwei Shen, Yuanchao Wu, Xiaoying Chen, Yiming Zhang

    In electric vehicle (EV) dynamic wireless power transfer (DWPT) systems, changes in the mutual inductance will lead to fluctuations in the output voltage and efficiency. In this article, a triple-coil receiver with a novel triple-diode rectifier structure that can reduce the number of diodes is proposed, with each phase connected to one of the triple decoupling coils (TDCs) on the receiving side. Decoupling is achieved with partial overlapping. Reverse windings are integrated into TDC to smooth the mutual inductance fluctuations. The proposed novel rectifier switches between the single-coil receiving mode and the dual-coil receiving mode in response to the different positions of the EV. The proposed magnetic coupler structure and the novel triple-diode rectifier guarantee a constant output during movement. The effectiveness of the proposed DWPT system has been verified by the experimental prototype. The output voltage remains stable over a long range, with a fluctuation of only about 3.49%. The proposed DWPT system cannot only reduce the number of track coils but also extend the novel triple-diode rectifier to multiple coils with a reduced diode number, which has a good reference value.


  • High-Misalignment-Tolerant Dual-Channel Inductive Power Transfer System Based on Cross-Shaped Reversed-Winding-Incorporated Solenoid Pad

    by Hui Wang, Yuanchao Wu, Zhiwei Shen, Wenbin Pan, Xiaoying Chen, Yiming Zhang

    The inductive power transfer (IPT) system needs to have a stable output even when the coil offset occurs. In this article, a combination of a square coil and a novel cross-shaped solenoid pad with reverse windings is proposed. The former is used to pick up the vertical magnetic flux, and the latter is to receive the horizontal magnetic flux generated in the offset case to compensate for the decrease in the vertical magnetic flux. A dual-channel inductor-capacitor-capacitor-series topology with series connected diode rectifiers is utilized to form two energy transfer channels with opposite misalignment characteristics to achieve a stable output. The proposed magnetic couplers can achieve a smooth mutual inductance fluctuation in both the horizontal X- and Y -directions. The fluctuation of the equivalent total mutual inductance is 4.35% from −210 to 210 mm (52.5% of the pad size) in both directions. An experimental prototype is built to verify the stability of the proposed IPT system. The experimental results show that within the 52.5% offset range of the pad size, the output voltage fluctuates by only 4.52%. A stable output can be obtained when the pad is offset from 90 to 140 mm in the vertical direction and the XOY plane.


  • A Strongly Coupled Vehicle-to-Vehicle Wireless Charging System for Emergency Charging Purposes With Constant-Current and Constant-Voltage Charging Capabilities

    by Ronghuan Xie, Yuanchao Wu, Hongmin Tang, Yizhan Zhuang, Yiming Zhang

    One current issue concerning rapidly developing electric vehicles (EVs) is range anxiety, especially when no charging station is around. A simple and expandable vehicle-to-vehicle (V2V) wireless charging scheme has been proposed to satisfy urgent charging needs. In the proposed V2V system, one EV serves as a mobile charger for the other. Two power relay coils without compensating capacitors are adopted, forming a strong coupling with the coils in the EV. Thus, power can be transferred from one EV to the other via the ac magnetic relay. The mathematical models of the existing loosely coupled V2V system and the proposed strongly coupled V2V system are established. The constant-voltage and constant-current operations for the proposed V2V system are explored. The experimental results reveal that, compared with the existing loosely coupled V2V system, employing the proposed strongly coupled V2V system can improve efficiency and reduce weight, volume, and cost.


  • Interoperability Study of Electric Vehicle Wireless Charging System Based on Three Decoupled Nonoverlapping Unipolar Transmitting Coils

    by Yiming Zhang, Wenbin Pan, Chao Liu, Zhiwei Shen, Yuanchao Wu, Yizhan Zhuang, Zhongqi Li

    The rapid development of electric vehicles (EVs) calls for an efficient and convenient charging method. Wireless power transfer (WPT) is favored by the academia and industry because of its convenience, security, and automation. However, there are still many problems to be solved, one of which is the interoperability issue between different coil types. In this article, an EV wireless charging system based on three decoupled non-overlapping unipolar transmitting coils is proposed. The inductor-capacitor-capacitor-series topology is adopted. The current directions of the three transmitting coils can be altered by adjusting the outputs of the three-phase independently controlled half-bridge inverter. In this way, the proposed transmitting coils can be tolerant with the unipolar coil and the two perpendicular bipolar coils, achieving interoperability and certain anti-misalignment capability with different receiving coils. The experimental results verify that the proposed system can achieve interoperability for both unipolar and bipolar coils and has misalignment tolerance in specific directions with a maximum efficiency of 93.67%.


  • An Integrated Electric Vehicle Charging System of Wireless Power Transfer and Auxiliary Power Module With Shared Converter and Magnetic Coupler

    by Yiming Zhang, Yuanchao Wu, Mingzhu Zhou, Hangyan Zhou, Xingkui Mao, Tao Jin, Xiaoying Chen

    Electric vehicles (EVs) normally contain two kinds of batteries: high-voltage (HV) power battery and low-voltage (LV) auxiliary battery. The charging systems for these two kinds of batteries are normally independent and separate. This article proposes an integrated charging system that combines wireless power transfer (WPT) for the HV battery and the auxiliary power module (APM) for the LV battery. Part of the power electronics converters and compensation network is shared. The doubled-sided LCC topology is adopted with a constant-current output. An APM transformer is inserted in the constant-current branch to pick up power for the LV and also to guarantee the independent HV and LV outputs. The proposed system can work in two modes. One is WPT and APM where both the HV and LV batteries can be charged simultaneously. The other is APM where the HV battery supplies power for the LV battery. The integration of WPT and APM can improve the overall power density of the EV charging system and reduce the weight and cost.