High-Misalignment-Tolerant Dual-Channel Inductive Power Transfer System Based on Cross-Shaped Reversed-Winding-Incorporated Solenoid Pad
- 14 February 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 71 (10) , 12499-12509
Abstract
The inductive power transfer (IPT) system needs to have a stable output even when the coil offset occurs. In this article, a combination of a square coil and a novel cross-shaped solenoid pad with reverse windings is proposed. The former is used to pick up the vertical magnetic flux, and the latter is to receive the horizontal magnetic flux generated in the offset case to compensate for the decrease in the vertical magnetic flux. A dual-channel inductor-capacitor-capacitor-series topology with series connected diode rectifiers is utilized to form two energy transfer channels with opposite misalignment characteristics to achieve a stable output. The proposed magnetic couplers can achieve a smooth mutual inductance fluctuation in both the horizontal X- and Y -directions. The fluctuation of the equivalent total mutual inductance is 4.35% from −210 to 210 mm (52.5% of the pad size) in both directions. An experimental prototype is built to verify the stability of the proposed IPT system. The experimental results show that within the 52.5% offset range of the pad size, the output voltage fluctuates by only 4.52%. A stable output can be obtained when the pad is offset from 90 to 140 mm in the vertical direction and the XOY plane.Keywords
Funding Information
- National Natural Science Foundation of China (52107183)
- Natural Science Foundation of Fujian Province (2022J06011)
This publication has 32 references indexed in Scilit:
- A Shared Charging Channel for Power and Auxiliary Batteries in Electric VehiclesIEEE Transactions on Industrial Electronics, 2023
- A Novel Asymmetrical Quadrupolar Coil for Interoperability of Unipolar, Bipolar, and Quadrupolar Coils in Electric Vehicle Wireless Charging SystemsIEEE Transactions on Industrial Electronics, 2023
- Gyrator-Gain Variable WPT Topology for MC-Unconstrained CC Output Customization Using Simplified Capacitance TuningIEEE Transactions on Industrial Electronics, 2023
- Decoupling Optimization of the Three-Coil Coupler for IPT System Featuring High Efficiency and Misalignment ToleranceIEEE Transactions on Industrial Electronics, 2022
- High-Misalignment-Tolerant IPT Systems With Solenoid and Double D PadsIEEE Transactions on Industrial Electronics, 2021
- Design Methodology of Free-Positioning Nonoverlapping Wireless Charging for Consumer Electronics Based on Antiparallel WindingsIEEE Transactions on Industrial Electronics, 2021
- Improving Misalignment Tolerance for IPT System Using a Third-CoilIEEE Transactions on Power Electronics, 2018
- A Misalignment-Tolerant Series-Hybrid Wireless EV Charging System With Integrated MagneticsIEEE Transactions on Power Electronics, 2018
- A Dual-Coupled LCC-Compensated IPT System With a Compact Magnetic CouplerIEEE Transactions on Power Electronics, 2017
- Hybrid Bidirectional Wireless EV Charging System Tolerant to Pad MisalignmentIEEE Transactions on Industrial Electronics, 2017