Jiantao Yue
Jiantao Yue has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Bin Wu
State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin, China
4 shared publications - Hongtong Li
Tianjin Univ, State Key Lab Precis Measuring Technol & Instrumen, Tianjin 300072, Peoples R China
3 shared publications - Jiehu Kang
Tianjin University
3 shared publications Yibing Hou
Tianjin Univ, State Key Lab Precis Measuring Technol & Instrumen, Tianjin 300072, Peoples R China
2 shared publications- Zhen Zhang
State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin 300072, People’s Republic of China
2 shared publications - Jiehu Kang
State Key Laboratory of Precision Measurement Technology and Instruments, Tianjin University, Tianjin, China
1 shared publication
Latest Publications
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (2) , 993-999
Efficient Phase Demodulation of Optical Carrier-Based Microwave Interferometry for High-Precision Dynamic Distance Measurement
We propose a technique to achieve high-speed and high-precision distance measurement via phase demodulation of broadband optical carrier-based microwave interferometry (OCMI). An in-phase and quadrature (I/Q) processing scheme is designed and incorporated to measure the phase shift induced by target distance. The results could be efficiently derived from a minimum of one pair of detected outputs with immunity to power fluctuations. To extend the non-ambiguous measurement range while maintaining high resolution, a multifrequency-based phase unwrapping procedure is implemented. In the meantime, a driving module is utilized to effectively amplify and stabilize the signal. Experiments were carried out to evaluate the feasibility and performance of the proposed OCMI distance measurement method, which exhibits good accuracy, stability, and reliability. The maximum residual error is found to be 0.084 mm and the relative error is less than 2 × 10 −4 . Moreover, the method is capable to perform thousands of measurements within a few seconds, thus the OCMI-based dynamic target tracking has been achieved.
- 22 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (2) , 993-999
Efficient Phase Demodulation of Optical Carrier-Based Microwave Interferometry for High-Precision Dynamic Distance Measurement
We propose a technique to achieve high-speed and high-precision distance measurement via phase demodulation of broadband optical carrier-based microwave interferometry (OCMI). An in-phase and quadrature (I/Q) processing scheme is designed and incorporated to measure the phase shift induced by target distance. The results could be efficiently derived from a minimum of one pair of detected outputs with immunity to power fluctuations. To extend the non-ambiguous measurement range while maintaining high resolution, a multifrequency-based phase unwrapping procedure is implemented. In the meantime, a driving module is utilized to effectively amplify and stabilize the signal. Experiments were carried out to evaluate the feasibility and performance of the proposed OCMI distance measurement method, which exhibits good accuracy, stability, and reliability. The maximum residual error is found to be 0.084 mm and the relative error is less than 2 × 10 −4 . Moreover, the method is capable to perform thousands of measurements within a few seconds, thus the OCMI-based dynamic target tracking has been achieved.
- 21 February 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 40 (3) , 531-537
Method of high-precision free-space distance measurement for noncooperative targets
Aimed at high-precision distance measurement for noncooperative targets in free space, a spatial distance measurement method is proposed. Based on the concept of optical carrier-based microwave interferometry, this method extracts distance information from the radiofrequency domain. The interference model of broadband light beams is established, and the optical interference can be eliminated by using a broadband light source. A spatial optical system with a Cassegrain telescope as the main body is designed to effectively receive the backscattered signal without cooperative targets. A free-space distance measurement system is built to verify the feasibility of the proposed method, and the results agree well with the set distances. Long-distance measurements with a resolution of 0.033 µm can be achieved, and the errors of the ranging experiments are within 0.1 µm. The proposed method has the advantages of fast processing speed, high measurement accuracy, and high immunity to disturbances as well as the potential for measurement of other physical quantities.
- 21 February 2023
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 40 (3) , 531-537
Method of high-precision free-space distance measurement for noncooperative targets
Aimed at high-precision distance measurement for noncooperative targets in free space, a spatial distance measurement method is proposed. Based on the concept of optical carrier-based microwave interferometry, this method extracts distance information from the radiofrequency domain. The interference model of broadband light beams is established, and the optical interference can be eliminated by using a broadband light source. A spatial optical system with a Cassegrain telescope as the main body is designed to effectively receive the backscattered signal without cooperative targets. A free-space distance measurement system is built to verify the feasibility of the proposed method, and the results agree well with the set distances. Long-distance measurements with a resolution of 0.033 µm can be achieved, and the errors of the ranging experiments are within 0.1 µm. The proposed method has the advantages of fast processing speed, high measurement accuracy, and high immunity to disturbances as well as the potential for measurement of other physical quantities.
- 4 October 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (29) , 8774-8782
Driving system for Mach–Zehnder electro-optic modulators in microwave photonics
In order to obtain a modulation signal with high bandwidth and highly stable output power without distortion, an electro-optic modulator driving system with quick response to the input signal is designed in this paper. The system mainly includes three parts: power supply module, microwave signal generation module, and automatic gain control (AGC) module. The power supply module provides appropriate voltage and current for other two modules. The microwave signal generation module is used to generate microwave signals. The AGC module adopts the digital AGC control structure and the PID control principle to achieve stable control of the output power of the microwave signal. The hardware is developed, and the software algorithm is integrated into the driving system to verify the effectiveness and stability. The experimental results show that the bandwidth of the AGC module reaches 20 GHz. The proposed AGC module can effectively stabilize the output power of the microwave signal at 10 dBm with fluctuations less than ±1.5 dB, and its stability is improved by 74.95% compared to existing instrument. When the input power changes at 10 KHz, the system can still achieve stable control performance and has exhibited excellent dynamic response characteristics.
- 4 October 2022
- Published by Optica Publishing Group in Applied Optics
- Vol. 61 (29) , 8774-8782
Driving system for Mach–Zehnder electro-optic modulators in microwave photonics
In order to obtain a modulation signal with high bandwidth and highly stable output power without distortion, an electro-optic modulator driving system with quick response to the input signal is designed in this paper. The system mainly includes three parts: power supply module, microwave signal generation module, and automatic gain control (AGC) module. The power supply module provides appropriate voltage and current for other two modules. The microwave signal generation module is used to generate microwave signals. The AGC module adopts the digital AGC control structure and the PID control principle to achieve stable control of the output power of the microwave signal. The hardware is developed, and the software algorithm is integrated into the driving system to verify the effectiveness and stability. The experimental results show that the bandwidth of the AGC module reaches 20 GHz. The proposed AGC module can effectively stabilize the output power of the microwave signal at 10 dBm with fluctuations less than ±1.5 dB, and its stability is improved by 74.95% compared to existing instrument. When the input power changes at 10 KHz, the system can still achieve stable control performance and has exhibited excellent dynamic response characteristics.