KYKhaled M. Yassin

Khaled M. Yassin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Khaled M. Yassin has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization of Neutron Flux in a Research Reactor for Enhanced Radioisotope Production

    by Mohamed Abdullah Abdullah Elaied, Khaled M. Yassin

    Enhancing radioisotope production in research reactors requires power upgrading, fuel management optimization, or enhancement of the facility, all of which may require regulatory approval and introduce operational restrictions. This study proposes a novel study on the reconfiguration of existing beryllium reflector blocks in a typical MTR-type research reactor for flux optimization. Two reflector rearrangement scenarios were chosen based on the creation of flux traps and the alignment of irradiation positions with low-burnup fuel and were evaluated using the WIMS-D5B/CITVAP neutronic analysis codes. The Be reconfiguration scenarios enhance neutron reflection toward selected irradiation positions while maintaining excess reactivity, power peaking factor, and operational limits and conditions within acceptable margins. The results show that thermal neutron flux improvements of up to 7% and 11% were achieved in Scenarios 1 and 2, respectively, for the first row. In addition, Scenario 2 extended the reactor cycle length to 19.5 days. The result is that Scenario 1 provides the most suitable configuration for achieving overall enhancement of thermal flux in the first and second rows due to its balanced total production increase while maintaining all irradiation positions; however, if the goal is to maximize flux per irradiation position rather than total production, Scenario 2 is preferable, as it delivers higher localized flux enhancement despite the reduction in the number of first-row positions. The optimization of neutron flux at irradiation positions through the reconfiguration of beryllium reflector blocks surrounding the core represents a low cost approach and preferable enhancement strategy.

  • Open Access

    Multiphysics simulation of VVER-1200 fuel performance during normal operating conditions

    by Khaled M. Yassin, Mohamed H. Hassan, Mohammad M. Ghoneim, Mostafa S. Elkolil, Adel Alyan, Said A. Agamy

    Nuclear fuel performance modeling and simulation are critical tasks for nuclear fuel design optimization and safety analysis under normal and transient conditions. Fuel performance is a complicated phenomenon that involves thermal, mechanical, and irradiation mechanisms and requires special multiphysics modules. In this study, a fuel performance model was developed using the COMSOL Multiphysics platform. The modeling was performed for a 2D axis-symmetric geometry of a UO2 fuel pellet in the E110 clad for VVER-1200 fuel. The modeling considers all relevant phenomena, including heat generation and conduction, gap heat transfer, elastic strain, mechanical contact, thermal expansion, grain growth, densification, fission gas generation and release, fission product swelling, gap/plenum pressure, and cladding thermal and irradiation creep. The model was validated using a code-to-code evaluation of the fuel pellet centerline and surface temperatures in the case of constant power, in addition to validation of fission gas release (FGR) predictions. This prediction proved that the model could perform according to previously published VVER nuclear fuel performance parameters. A sensitivity study was also conducted to assess the effects of uncertainty on some of the model parameters. The model was then used to predict the VVER-1200 fuel performance parameters as a function of burnup, including the temperature profiles, gap width, fission gas release, and plenum pressure. A compilation of related material and thermomechanical models was conducted and included in the modeling to allow the user to investigate different material/performance models. Although the model was developed for normal operating conditions, it can be modified to include off-normal operating conditions.


  • A zero prevalence of anti-HIV in blood donors in Gaza: how can it be sustained?

    by Khaled Yassin, Riyad Awad, Abd Jabbar Tebi, Ali Queder, Ulrich Laaser