MHMohamed H. Hassan

Mohamed H. Hassan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mohamed H. Hassan has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Multiphysics simulation of VVER-1200 fuel performance during normal operating conditions

    by Khaled M. Yassin, Mohamed H. Hassan, Mohammad M. Ghoneim, Mostafa S. Elkolil, Adel Alyan, Said A. Agamy

    Nuclear fuel performance modeling and simulation are critical tasks for nuclear fuel design optimization and safety analysis under normal and transient conditions. Fuel performance is a complicated phenomenon that involves thermal, mechanical, and irradiation mechanisms and requires special multiphysics modules. In this study, a fuel performance model was developed using the COMSOL Multiphysics platform. The modeling was performed for a 2D axis-symmetric geometry of a UO2 fuel pellet in the E110 clad for VVER-1200 fuel. The modeling considers all relevant phenomena, including heat generation and conduction, gap heat transfer, elastic strain, mechanical contact, thermal expansion, grain growth, densification, fission gas generation and release, fission product swelling, gap/plenum pressure, and cladding thermal and irradiation creep. The model was validated using a code-to-code evaluation of the fuel pellet centerline and surface temperatures in the case of constant power, in addition to validation of fission gas release (FGR) predictions. This prediction proved that the model could perform according to previously published VVER nuclear fuel performance parameters. A sensitivity study was also conducted to assess the effects of uncertainty on some of the model parameters. The model was then used to predict the VVER-1200 fuel performance parameters as a function of burnup, including the temperature profiles, gap width, fission gas release, and plenum pressure. A compilation of related material and thermomechanical models was conducted and included in the modeling to allow the user to investigate different material/performance models. Although the model was developed for normal operating conditions, it can be modified to include off-normal operating conditions.


  • Safety Analysis in VVER-1000 Due to Large-Break Loss-of-Coolant Accident and Station Blackout Transient Using RELAP5/SCDAPSIM/MOD3.5

    by Fabiano Gibson Daud Thulu, Ayah Elshahat, Mohamed Hassan

    It is crucial to do safety evaluation of different postulated transient scenarios in actual nuclear power plants (NPPs). Some of the common analyzed scenarios are primary coolant tube rupture and station blackout (SBO). In this research, it was supposed that after establishment of a steady-state condition, an instantaneous guillotine large-break loss-of-coolant accident (LB-LOCA) of 850-mm inside diameter in one of the reactor vessel cold legs occurred, accompanied with SBO. The event progression and the variation of different reactor parameters like loop pressures, mass flow rates, fuel and clad temperature, injection rate of accumulators (ACCs), decay, and reactor power were investigated using the RELAP5/SCDAPSIM/MOD3.5 thermal-hydraulic program. The reactor consequences due to availability and unavailability of passive ACCs were compared. These kinds of analyses assist in estimating the time available to perform operator safety actions. This in turn aids in emergency planning and severe accident management. The results reveal that fuel damage decreased after the introduction of ACCs. Actuation of ACCs at their actuation setpoints provided core cooling by injecting water into the reactor core. However, ACCs alone are inadequate to contain long-term core cooling during a persistent LB-LOCA. The results obtained in the research were compared with MELCOR 2.1 and ASTEC V1.3, and a cohesive agreement was obtained. Therefore, RELAP5/SCDAPSIM/MOD3.5 is capable of modeling a LB-LOCA and SBO in VVER-1000, and it provides a significant analytical capability of safety systems for specialists in the field in NPP safety.


  • Open Access

    Simulation of VVER-1000 Guillotine Large Break Loss of Coolant Accident Using RELAP5/SCDAPSIM/MOD3.5

    by Fabiano Gibson Daud Thulu, Ayah Elshahat, Mohamed H. M. Hassan

    The safety performance of nuclear power plants (NPPs) is a very important factor in evaluating nuclear energy sustainability. Safety analysis of passive and active safety systems have a positive influence on reactor transient mitigation. One of the common transients is primary coolant leg rupture. This study focused on guillotine large break loss of coolant (LB-LOCA) in one of the reactor vessels, in which cold leg rupture occurred, after establishment of a steady-state condition for the VVER-1000. The reactor responses and performance of emergence core cooling systems (ECCSs) were investigated. The main safety margin considered during this simulation was to check the maximum value of the clad surface temperature, and it was then compared with the design licensing limit of 1474 K. The calculations of event progression used the engineering-level RELAP5/SCDAPSIM/MOD3.5 thermal-hydraulic program, which also provide a more detailed treatment of coolant system thermal hydraulics and core behavior. The obtained results show that actuation of ECCSs at their actuation set points provided core cooling by injecting water into the reactor pressure vessel, as expected. The peak cladding temperature did not overpass the licensing limit during this LB-LOCA transient. The primary pressure above the core decreased rapidly from 15.7 MPa to 1 MPa in less than 10 s, then stabilizes up to the end of transient. The fuel temperature decreased from 847 K to 378 K during the first 30 s of the transient time. The coolant leakage reduced from 9945 kg/s to approximately 461 kg/s during the first 190 s in the transient. Overall, the study shows that, within the design of the VVER-1000, safety systems of the have inherent robustness of containing guillotine LB-LOCA.