Turgut Kaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Turgut Kaya has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Cenk Karakurt
BİLECİK ŞEYH EDEBALİ ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, İNŞAAT MÜHENDİSLİĞİ BÖLÜMÜ
1 shared publication - Murat Aras
Civil Engineering Department Bilecik Şeyh Edebali University Bilecik Turkey
1 shared publication - Özlem Çalışkan
Bilecik Şeyh Edebali Üniversitesi
1 shared publication
Latest Publications
- 26 February 2023
- Published by Fundacja Cement Wapno Beton in Cement Wapno Beton
- Vol. 27 (5) , 330-345
Effect of synthetic zeolite on tobermorite synthesis
Chemical anchors are widely used in additional installations of construction irons, repair and reinforcement work. Due to the increasing diversity of materials and the improved awareness of waste products, it has become possible to produce different kinds of concrete, with various properties. In this study, class B420C ribbed bars with 16 mm diameter, were installed in four different concretes by using four different chemical adhesives, and a tensile force was applied. The stiffness, displacement ductility ratio, energy-dissipation capability and tensile force values were determined and the failure modes were interpreted from the load-displacement curves, obtained as a result of the experiments. It was found that the tensile force and energy-dissipation capacity, had increased as a result of installing anchor and applying a tensile force to the concrete, that was obtained by adding admixture materials, to the reference concrete. In the analytical part of the study, the formulation provided in ACI 318 was used, capacity and design strengths were identified, and their safety levels were determined in comparison with the test results.
- 26 February 2023
- Published by Fundacja Cement Wapno Beton in Cement Wapno Beton
- Vol. 27 (5) , 330-345
Effect of synthetic zeolite on tobermorite synthesis
Chemical anchors are widely used in additional installations of construction irons, repair and reinforcement work. Due to the increasing diversity of materials and the improved awareness of waste products, it has become possible to produce different kinds of concrete, with various properties. In this study, class B420C ribbed bars with 16 mm diameter, were installed in four different concretes by using four different chemical adhesives, and a tensile force was applied. The stiffness, displacement ductility ratio, energy-dissipation capability and tensile force values were determined and the failure modes were interpreted from the load-displacement curves, obtained as a result of the experiments. It was found that the tensile force and energy-dissipation capacity, had increased as a result of installing anchor and applying a tensile force to the concrete, that was obtained by adding admixture materials, to the reference concrete. In the analytical part of the study, the formulation provided in ACI 318 was used, capacity and design strengths were identified, and their safety levels were determined in comparison with the test results.