Alexander V. Dedov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Alexander V. Dedov has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Victor G. Nazarov
Faculty of Printing Industry, Moscow Polytechnic University, 107023 Moscow, Russia
21 shared publications V. G. Nazarov
Moscow Polytechnic University, Moscow, Russia
20 shared publicationsN. V. Chernousova
Kosygin Russian State University (Technology. Design. Art), Moscow, Russia
13 shared publicationsT. A. Leshchenko
A.N. Kosygin Moscow State Textile University, Moscow, Russia
6 shared publicationsO. V. Kozhevnikova
A. N. Kosygin Russian State University (Technologies, Design, Art), Moscow, Russia
5 shared publicationsA. G. Evdokimov
Moscow Polytechnic University, Moscow, Russia
4 shared publications
Latest Publications
- 1 January 2026
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (5) , 349-352
Modeling Degree of Impregnation of Nonwoven Needle-Punched Fabric from Polypropylene Fibers with Polyurethane Dispersion
- 1 January 2026
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (5) , 349-352
Modeling Degree of Impregnation of Nonwoven Needle-Punched Fabric from Polypropylene Fibers with Polyurethane Dispersion
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 258-262
Influence of Treatment Modes on Physicomechanical Properties of Materials with Various Contents of Bicomponent Fibers
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 258-262
Influence of Treatment Modes on Physicomechanical Properties of Materials with Various Contents of Bicomponent Fibers
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 252-257
Thermomechanical Treatment of Nonwoven Needle-Punched Fabrics
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 252-257
Thermomechanical Treatment of Nonwoven Needle-Punched Fabrics
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 247-251
Abrasion Resistance of Flexible Composite Polishing Materials Based on Nonwoven Matrices Made of Fibers of Different Linear Density
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 247-251
Abrasion Resistance of Flexible Composite Polishing Materials Based on Nonwoven Matrices Made of Fibers of Different Linear Density
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 243-246
Influence of Fibrous Filler Composition on Hardness of Composite Polishing Material
- 1 September 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (4) , 243-246
Influence of Fibrous Filler Composition on Hardness of Composite Polishing Material
- Open Access
Design of a Hybrid 3D-Printed Composite Material Based on Non-Woven Needle-Punched Fabrics with Radio-Absorbing Properties
The paper proposes a manufacturing technology for the non-woven/3D-printed (N3DP) hybrid material (HM) with improved radio-absorbing properties. We have fabricated the needle-punched non-woven felt and impregnated it with the carbon fibers containing UV-curable photopolymer resin. The functional 3D-printed layer was attached to the highly porous, deformable polymer substrate by the fused deposition modeling (FDM) technique. The preliminary bulk modification of the filament was realized with the IR- and UV-pigment microcapsules filling. The combination of additive prototyping and non-woven needle-punched fabrics surface modification (by the electrically conductive elements 2D-periodic system applying) expands the frequency range of the electromagnetic radiation effective absorption. It provides the possibility of a reversible change in the color characteristics of the hybrid material surface under the influence of the UV and IR radiation.
Open AccessDesign of a Hybrid 3D-Printed Composite Material Based on Non-Woven Needle-Punched Fabrics with Radio-Absorbing Properties
The paper proposes a manufacturing technology for the non-woven/3D-printed (N3DP) hybrid material (HM) with improved radio-absorbing properties. We have fabricated the needle-punched non-woven felt and impregnated it with the carbon fibers containing UV-curable photopolymer resin. The functional 3D-printed layer was attached to the highly porous, deformable polymer substrate by the fused deposition modeling (FDM) technique. The preliminary bulk modification of the filament was realized with the IR- and UV-pigment microcapsules filling. The combination of additive prototyping and non-woven needle-punched fabrics surface modification (by the electrically conductive elements 2D-periodic system applying) expands the frequency range of the electromagnetic radiation effective absorption. It provides the possibility of a reversible change in the color characteristics of the hybrid material surface under the influence of the UV and IR radiation.
- 1 May 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (1) , 50-55
Composites Prepared by Impregnation of Nonwoven Polyacetal Cloth Fibers with Various Polyurethane Dispersions
- 1 May 2025
- Published by Springer Nature in Fibre Chemistry
- Vol. 57 (1) , 50-55
Composites Prepared by Impregnation of Nonwoven Polyacetal Cloth Fibers with Various Polyurethane Dispersions
- 1 March 2025
- Published by Pleiades Publishing Ltd in Polymer Science, Series D
- Vol. 18 (1) , 159-163
The Effect of the Thickness of a Coating Made of Oxidized Silicon Compounds on the Desorption of Dioctyl Phthalate from Poly(Ethylene Terephthalate) Films
Based on the literature data, a two-factor model has been developed for predicting the rate of the extraction of dioctyl phthalate from a poly(ethylene terephthalate) film with a silica-based protective coating of different thicknesses. Using the proposed approach to developing the model, the process of plasticizer desorption has been divided into two stages, which differs in the rates of transfer of an ingredient. The coating thickness affects both the desorption rate at the first stage and the plasticizer content, the desorption of which results in the transition to the second stage of the process. A numerical solution of the equation has been performed to obtain the dependence of the content of desorbed dioctyl phthalate on the protective coating thickness and on the extractant temperature.
- 1 March 2025
- Published by Pleiades Publishing Ltd in Polymer Science, Series D
- Vol. 18 (1) , 159-163
The Effect of the Thickness of a Coating Made of Oxidized Silicon Compounds on the Desorption of Dioctyl Phthalate from Poly(Ethylene Terephthalate) Films
Based on the literature data, a two-factor model has been developed for predicting the rate of the extraction of dioctyl phthalate from a poly(ethylene terephthalate) film with a silica-based protective coating of different thicknesses. Using the proposed approach to developing the model, the process of plasticizer desorption has been divided into two stages, which differs in the rates of transfer of an ingredient. The coating thickness affects both the desorption rate at the first stage and the plasticizer content, the desorption of which results in the transition to the second stage of the process. A numerical solution of the equation has been performed to obtain the dependence of the content of desorbed dioctyl phthalate on the protective coating thickness and on the extractant temperature.
- 1 March 2025
- Published by Pleiades Publishing Ltd in Polymer Science, Series D
- Vol. 18 (1) , 1-5
Modeling of the Kinetics of Desorption of Dioctyl Phthalate from Polyvinylchloride into Human Blood and Simulation Fluids
A model for the assessment of the kinetics of desorption of dioctyl phthalate from polyvinylchloride films with a coating based on polyurethanes with various compositions into human blood and simulation fluids is proposed. The approach to the modeling of the kinetics of desorption of the plasticizer is based on the equations describing the kinetic dependences of desorption in the system of coordinates of the square root from the time of the process. The proposed model provides determination of the dependence of the kinetics of desorption of the plasticizer on the composition of polyurethane. The delay time of the process of desorption is found and a parameter determining the ratio between the processes of desorption into simulation fluids and blood is proposed.
- 1 March 2025
- Published by Pleiades Publishing Ltd in Polymer Science, Series D
- Vol. 18 (1) , 1-5
Modeling of the Kinetics of Desorption of Dioctyl Phthalate from Polyvinylchloride into Human Blood and Simulation Fluids
A model for the assessment of the kinetics of desorption of dioctyl phthalate from polyvinylchloride films with a coating based on polyurethanes with various compositions into human blood and simulation fluids is proposed. The approach to the modeling of the kinetics of desorption of the plasticizer is based on the equations describing the kinetic dependences of desorption in the system of coordinates of the square root from the time of the process. The proposed model provides determination of the dependence of the kinetics of desorption of the plasticizer on the composition of polyurethane. The delay time of the process of desorption is found and a parameter determining the ratio between the processes of desorption into simulation fluids and blood is proposed.