Behzat Yıldırım
Research Subjects
Research Interests
Behzat Yıldırım has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Topalbekiroğlu
Gaziantep University
5 shared publications - Halil İbRahim İçOğlu
GAZIANTEP UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING (ENGLISH)
4 shared publications - Ali Kiliç
Department of Mechanical Engineering, Gaziantep University, Gaziantep, Trkiye
2 shared publications - Muhammed İdris Aktaş
Boyar Kimya Inc
2 shared publications - Emel Ceyhun Sabir
Cukurova Universitesi
1 shared publication - Hanan Yunus
Çukurova University
1 shared publication
Latest Publications
- 26 September 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (3) , 513-520
The Effects of Steaming Duration and Temperature on Pilling and Fastness Properties in Vigoureux Printing Technique
This study examines the impact of steaming duration and temperature on pilling resistance and fastness properties in fabrics printed using the Vigoureux technique. The Vigoureux printing method, which dates back to the 1800s, involves printing patterns on fiber tops, blending these with unprinted fibers, and producing mélange-like yarns used in textile applications. In this study, polyamide and wool fibers printed with acid dyes were subjected to varying steaming durations (50–70 minutes) and temperatures (85–105°C). Subsequently, the yarns were processed into knitted fabrics and subjected to a series of tests to assess their pilling, rubbing, washing, and water fastness properties. Results indicated that increased steaming duration and temperature led to reduced pilling resistance but enhanced fastness properties, likely due to improved dye penetration. The study emphasizes the critical role of steaming parameters in optimizing textile performance, providing insights for enhancing the durability of Vigoureux-printed fabrics.
- 26 September 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (3) , 513-520
The Effects of Steaming Duration and Temperature on Pilling and Fastness Properties in Vigoureux Printing Technique
This study examines the impact of steaming duration and temperature on pilling resistance and fastness properties in fabrics printed using the Vigoureux technique. The Vigoureux printing method, which dates back to the 1800s, involves printing patterns on fiber tops, blending these with unprinted fibers, and producing mélange-like yarns used in textile applications. In this study, polyamide and wool fibers printed with acid dyes were subjected to varying steaming durations (50–70 minutes) and temperatures (85–105°C). Subsequently, the yarns were processed into knitted fabrics and subjected to a series of tests to assess their pilling, rubbing, washing, and water fastness properties. Results indicated that increased steaming duration and temperature led to reduced pilling resistance but enhanced fastness properties, likely due to improved dye penetration. The study emphasizes the critical role of steaming parameters in optimizing textile performance, providing insights for enhancing the durability of Vigoureux-printed fabrics.
- Open Access
- 24 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (12)
Production of Parallel Aligned Nanofiber Rovings From Continuous Bundles
This study presents a novel approach to converting electrospun polyacrylonitrile (PAN) nanofiber bundles into rovings, essential for nanofiber yarn spinning, through the implementation of false twisting and drawing processes. The false twisting process is optimized by varying the input bundle angle (40° to 60°), twister type (A, B, C), and rotation speed (20, 50, and 80 rpm). A bundle input angle of 55°, twister type B, and a twister rotation speed of 80 rpm show the best results in terms of longer twisted length, lower average thickness, and thickness variation values. The morphological, physical, and mechanical properties of the resulting nanofiber rovings for drawing process implementation are also evaluated. Scanning electron microscope (SEM) analysis further reveals significant improvements in nanofiber alignment and uniformity. The drawing process reduces the average nanofiber diameter from 297 to 200 nm and decreases the standard deviation of alignment angles from 14.2° to 8.1°, indicating a substantial enhancement in parallel nanofiber alignment. These morphological changes contribute to a marked increase in tensile strength from 2.2 to 3.3 cN tex−1. Integrating false twisting and drawing processes in electrospun nanofiber production can significantly enhance the mechanical properties and alignment of nanofibers, making them more suitable for advanced textile applications.
- 24 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (12)
Open AccessProduction of Parallel Aligned Nanofiber Rovings From Continuous Bundles
This study presents a novel approach to converting electrospun polyacrylonitrile (PAN) nanofiber bundles into rovings, essential for nanofiber yarn spinning, through the implementation of false twisting and drawing processes. The false twisting process is optimized by varying the input bundle angle (40° to 60°), twister type (A, B, C), and rotation speed (20, 50, and 80 rpm). A bundle input angle of 55°, twister type B, and a twister rotation speed of 80 rpm show the best results in terms of longer twisted length, lower average thickness, and thickness variation values. The morphological, physical, and mechanical properties of the resulting nanofiber rovings for drawing process implementation are also evaluated. Scanning electron microscope (SEM) analysis further reveals significant improvements in nanofiber alignment and uniformity. The drawing process reduces the average nanofiber diameter from 297 to 200 nm and decreases the standard deviation of alignment angles from 14.2° to 8.1°, indicating a substantial enhancement in parallel nanofiber alignment. These morphological changes contribute to a marked increase in tensile strength from 2.2 to 3.3 cN tex−1. Integrating false twisting and drawing processes in electrospun nanofiber production can significantly enhance the mechanical properties and alignment of nanofibers, making them more suitable for advanced textile applications.
- Open Access
- 27 August 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (20)
Continuous Nanofiber Bundle Production Using Helical Spinnerets with Different Configurations in Needleless Electrospinning
This study investigates the production of continuous nanofiber bundles using needleless electrospinning with a focus on helical spinneret configurations. It delves into the effects of spinneret diameter, pitch length, and thickness on nanofiber bundle characteristics, employing polyacrylonitrile as the polymer. The research highlights the significant impact of these parameters on the nanofiber morphology, bundle width, productivity, and deposition properties of nanofiber bundles. Scanning electron microscopy imaging, bundle depositions analyses, and electric field modeling with COMSOL Multiphysics are applied for the nanofiber bundles electrospun by helical spinnerets. As the diameter of the spinneret increases, productivity, bundle width, deposition ratio, deposition intensity, and deposition homogeneity are increased significantly. Additionally, an increase in spinneret thickness leads to a decrease in average nanofiber diameter. Specifically, increasing the spinneret diameter from 30 to 50 mm, pitch length from 20 to 40 mm, and reducing thickness from 3 to 1 mm increases productivity by 170%, 72%, and 32%, respectively. As a result of practical and modeling studies on helical spinnerets, the optimized parameters are determined as 1 mm thickness, 40 mm pitch length, and 50 mm diameter.
- 27 August 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (20)
Open AccessContinuous Nanofiber Bundle Production Using Helical Spinnerets with Different Configurations in Needleless Electrospinning
This study investigates the production of continuous nanofiber bundles using needleless electrospinning with a focus on helical spinneret configurations. It delves into the effects of spinneret diameter, pitch length, and thickness on nanofiber bundle characteristics, employing polyacrylonitrile as the polymer. The research highlights the significant impact of these parameters on the nanofiber morphology, bundle width, productivity, and deposition properties of nanofiber bundles. Scanning electron microscopy imaging, bundle depositions analyses, and electric field modeling with COMSOL Multiphysics are applied for the nanofiber bundles electrospun by helical spinnerets. As the diameter of the spinneret increases, productivity, bundle width, deposition ratio, deposition intensity, and deposition homogeneity are increased significantly. Additionally, an increase in spinneret thickness leads to a decrease in average nanofiber diameter. Specifically, increasing the spinneret diameter from 30 to 50 mm, pitch length from 20 to 40 mm, and reducing thickness from 3 to 1 mm increases productivity by 170%, 72%, and 32%, respectively. As a result of practical and modeling studies on helical spinnerets, the optimized parameters are determined as 1 mm thickness, 40 mm pitch length, and 50 mm diameter.
- Open Access
- 30 June 2024
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 12 (2) , 377-383
AKRİLİK LİF İNCELİĞİ VE RELAKSE/RELAKSE OLMAMIŞ KARIŞIM ORANLARININ KAPSAMLI ANALİZİ: İPLİK ÖZELLİKLERİ ÜZERİNE ETKİLERİ
Günümüzde tekstil endüstrisindeki hızlı teknolojik gelişmeler, malzeme bilimi ve tekstil mühendisliği alanlarında derinlemesine araştırmalara olan ihtiyacı artırmaktadır. Tekstil malzemelerinin özelliklerini anlamak ve geliştirmek, endüstriyel uygulamalarda ve günlük yaşamımızda karşılaştığımız tekstil ürünlerinin performansını optimize etmek için kritik öneme sahiptir. Bu çalışma, özellikle farklı incelikteki akrilik liflerin relakse/relakse olmamış karışım oranlarının, iplik özellikleri üzerindeki etkilerini anlamak ve değerlendirmek amacıyla gerçekleştirilmiştir. Çalışmada 1,7 dtex, 2,75 dtex ve 3,3 dtex olmak üzere üç farklı incelikte akrilik liflerinden altı farklı relakse/relakse olmamış karışım oranında (100/0, 80/20, 60/40, 40/60, 20/80 ve 0/100) 18 farklı iplik üretilmiştir. Bu ipliklerin kopma mukavemeti, kopma uzaması (%), iplik düzgünsüzlüğü (CVm, %), ince yer, kalın yer, neps ve tüylülük gibi kritik iplik özellikleri detaylı bir şekilde incelenmiştir. Elde edilen sonuçlar, lif inceliği arttıkça kopma mukavemeti ve kopma uzaması değerlerinin de arttığını göstermiştir. Relakse/relakse olmamış karışımlı ipliklerde, özellikle relakse oranının artması kopma mukavemeti üzerinde ilginç bir eğilim göstermiştir. Ayrıca, karışımlı ipliklerde genel olarak relakse oranı arttıkça iplik hataları azalmıştır.
- 30 June 2024
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 12 (2) , 377-383
Open AccessAKRİLİK LİF İNCELİĞİ VE RELAKSE/RELAKSE OLMAMIŞ KARIŞIM ORANLARININ KAPSAMLI ANALİZİ: İPLİK ÖZELLİKLERİ ÜZERİNE ETKİLERİ
Günümüzde tekstil endüstrisindeki hızlı teknolojik gelişmeler, malzeme bilimi ve tekstil mühendisliği alanlarında derinlemesine araştırmalara olan ihtiyacı artırmaktadır. Tekstil malzemelerinin özelliklerini anlamak ve geliştirmek, endüstriyel uygulamalarda ve günlük yaşamımızda karşılaştığımız tekstil ürünlerinin performansını optimize etmek için kritik öneme sahiptir. Bu çalışma, özellikle farklı incelikteki akrilik liflerin relakse/relakse olmamış karışım oranlarının, iplik özellikleri üzerindeki etkilerini anlamak ve değerlendirmek amacıyla gerçekleştirilmiştir. Çalışmada 1,7 dtex, 2,75 dtex ve 3,3 dtex olmak üzere üç farklı incelikte akrilik liflerinden altı farklı relakse/relakse olmamış karışım oranında (100/0, 80/20, 60/40, 40/60, 20/80 ve 0/100) 18 farklı iplik üretilmiştir. Bu ipliklerin kopma mukavemeti, kopma uzaması (%), iplik düzgünsüzlüğü (CVm, %), ince yer, kalın yer, neps ve tüylülük gibi kritik iplik özellikleri detaylı bir şekilde incelenmiştir. Elde edilen sonuçlar, lif inceliği arttıkça kopma mukavemeti ve kopma uzaması değerlerinin de arttığını göstermiştir. Relakse/relakse olmamış karışımlı ipliklerde, özellikle relakse oranının artması kopma mukavemeti üzerinde ilginç bir eğilim göstermiştir. Ayrıca, karışımlı ipliklerde genel olarak relakse oranı arttıkça iplik hataları azalmıştır.
- 31 March 2023
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (1) , 1-8
Characterization and Antibacterial Activity of Electrospun Polyethylene oxide/Chitosan Nanofibers
This study aims to characterize and evaluate polyethylene oxide (PEO) and chitosan (CS) nanofibers produced by electrospinning method. Electrospinning solutions were used at three different concentrations (1, 2, 3 wt%) with five different PEO/CS mixing ratios (30/70, 40/60, 50/50, 60/40, 100/0). FESEM, XRD and FTIR tests were applied for characterization of the nanofibers. Antibacterial activity of the nanofibers against Staphylococcus aureus and Klebsiella pneumoniae microorganisms was investigated using disk diffusion method. While 1 wt% of concentration was not suitable to obtain regular nanofibers, the nanofibers were uniform and largely free of beads at the other ones (2, 3 wt%). The average diameters of the nanofibers varied from 59 to 298 nm depending on the concentration and mixing ratio. Strong hydrogen bonds were formed between two polymers, while the crystal structure of PEO did not change significantly when mixed with chitosan. The PEO/CS nanofibers showed no resistance to the selected bacteria.
- 31 March 2023
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (1) , 1-8
Characterization and Antibacterial Activity of Electrospun Polyethylene oxide/Chitosan Nanofibers
This study aims to characterize and evaluate polyethylene oxide (PEO) and chitosan (CS) nanofibers produced by electrospinning method. Electrospinning solutions were used at three different concentrations (1, 2, 3 wt%) with five different PEO/CS mixing ratios (30/70, 40/60, 50/50, 60/40, 100/0). FESEM, XRD and FTIR tests were applied for characterization of the nanofibers. Antibacterial activity of the nanofibers against Staphylococcus aureus and Klebsiella pneumoniae microorganisms was investigated using disk diffusion method. While 1 wt% of concentration was not suitable to obtain regular nanofibers, the nanofibers were uniform and largely free of beads at the other ones (2, 3 wt%). The average diameters of the nanofibers varied from 59 to 298 nm depending on the concentration and mixing ratio. Strong hydrogen bonds were formed between two polymers, while the crystal structure of PEO did not change significantly when mixed with chitosan. The PEO/CS nanofibers showed no resistance to the selected bacteria.