Mehmet Topalbekiroğlu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mehmet Topalbekiroğlu has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Behzat Yıldırım
GAZIANTEP UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING (ENGLISH)
5 shared publications - Halil İbRahim İçOğlu
GAZIANTEP UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF TEXTILE ENGINEERING (ENGLISH)
4 shared publications - Ali Kiliç
Department of Mechanical Engineering, Gaziantep University, Gaziantep, Trkiye
2 shared publications - Ebru Çelikten
Textile Engineering Department, Gaziantep University 1 , Gaziantep 27310
2 shared publications - Mehmet Dasdemir
The Nonwovens Institute, NC State University 2 , Raleigh, NC 27606
2 shared publications - Muhammed İdris Aktaş
Boyar Kimya Inc
2 shared publications
Latest Publications
- 26 September 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (3) , 513-520
The Effects of Steaming Duration and Temperature on Pilling and Fastness Properties in Vigoureux Printing Technique
This study examines the impact of steaming duration and temperature on pilling resistance and fastness properties in fabrics printed using the Vigoureux technique. The Vigoureux printing method, which dates back to the 1800s, involves printing patterns on fiber tops, blending these with unprinted fibers, and producing mélange-like yarns used in textile applications. In this study, polyamide and wool fibers printed with acid dyes were subjected to varying steaming durations (50–70 minutes) and temperatures (85–105°C). Subsequently, the yarns were processed into knitted fabrics and subjected to a series of tests to assess their pilling, rubbing, washing, and water fastness properties. Results indicated that increased steaming duration and temperature led to reduced pilling resistance but enhanced fastness properties, likely due to improved dye penetration. The study emphasizes the critical role of steaming parameters in optimizing textile performance, providing insights for enhancing the durability of Vigoureux-printed fabrics.
- 26 September 2025
- Published by Cukurova Universitesi Muhendislik-Mimarlik Fakultesi Dergisi in Çukurova Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 40 (3) , 513-520
The Effects of Steaming Duration and Temperature on Pilling and Fastness Properties in Vigoureux Printing Technique
This study examines the impact of steaming duration and temperature on pilling resistance and fastness properties in fabrics printed using the Vigoureux technique. The Vigoureux printing method, which dates back to the 1800s, involves printing patterns on fiber tops, blending these with unprinted fibers, and producing mélange-like yarns used in textile applications. In this study, polyamide and wool fibers printed with acid dyes were subjected to varying steaming durations (50–70 minutes) and temperatures (85–105°C). Subsequently, the yarns were processed into knitted fabrics and subjected to a series of tests to assess their pilling, rubbing, washing, and water fastness properties. Results indicated that increased steaming duration and temperature led to reduced pilling resistance but enhanced fastness properties, likely due to improved dye penetration. The study emphasizes the critical role of steaming parameters in optimizing textile performance, providing insights for enhancing the durability of Vigoureux-printed fabrics.
- 2 June 2025
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 53 (4) , 1039-1059
Investigation of the Physical, Mechanical, and Liquid Management Properties of the Novel Through-Air Bonded/Airlaid Nonwoven Composites
Nonwoven composites are multilayer or multicomponent structures that use different raw materials (polypropylene, polyethylene, polyester, bicomponent, etc.) and different processes (spunbond, meltblown, wetlaid, etc.) that are designed and developed based on targeted products. This study focuses on a new technique for the development of nonwoven composites to be produced at different production stages than the currently produced nonwoven composite structures. In this study, nonwoven composites were formed by through-air bonded/airlaid nonwoven bonding in the airlaid nonwoven production line and did not require a separate bonding process. As part of the study, the nonwoven composites were produced step by step. In the first stage, through-air bonded nonwovens with three different basis weights (20 g/m2, 30 g/m2, 45 g/m2) were used and the basis weight was determined. Then, different chemical binder (latex) ratios (9 %, 12 %, and 15 %) were used in the composite structure and the latex ratio was determined. In the next step, different super absorbent polymer (SAP) ratios (30 %, 22 %, 10 %, and 0 %) were used and determined in the composite structure. Finally, the physical (basis weight, thickness, air permeability), mechanical (breaking force, elongation, bond force, bending rigidity), and liquid management (liquid strike-through time, wetback, liquid absorption capacity, and retention) properties of all nonwoven composite samples were tested and the results were analyzed. One-way analysis of variance was performed to determine whether basis weight, chemical binder (latex) ratio, and SAP ratio had a statistically significant effect on the physical, mechanical, and liquid management properties of the nonwoven composites.
- 2 June 2025
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 53 (4) , 1039-1059
Investigation of the Physical, Mechanical, and Liquid Management Properties of the Novel Through-Air Bonded/Airlaid Nonwoven Composites
Nonwoven composites are multilayer or multicomponent structures that use different raw materials (polypropylene, polyethylene, polyester, bicomponent, etc.) and different processes (spunbond, meltblown, wetlaid, etc.) that are designed and developed based on targeted products. This study focuses on a new technique for the development of nonwoven composites to be produced at different production stages than the currently produced nonwoven composite structures. In this study, nonwoven composites were formed by through-air bonded/airlaid nonwoven bonding in the airlaid nonwoven production line and did not require a separate bonding process. As part of the study, the nonwoven composites were produced step by step. In the first stage, through-air bonded nonwovens with three different basis weights (20 g/m2, 30 g/m2, 45 g/m2) were used and the basis weight was determined. Then, different chemical binder (latex) ratios (9 %, 12 %, and 15 %) were used in the composite structure and the latex ratio was determined. In the next step, different super absorbent polymer (SAP) ratios (30 %, 22 %, 10 %, and 0 %) were used and determined in the composite structure. Finally, the physical (basis weight, thickness, air permeability), mechanical (breaking force, elongation, bond force, bending rigidity), and liquid management (liquid strike-through time, wetback, liquid absorption capacity, and retention) properties of all nonwoven composite samples were tested and the results were analyzed. One-way analysis of variance was performed to determine whether basis weight, chemical binder (latex) ratio, and SAP ratio had a statistically significant effect on the physical, mechanical, and liquid management properties of the nonwoven composites.
- Open Access
- 24 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (12)
Production of Parallel Aligned Nanofiber Rovings From Continuous Bundles
This study presents a novel approach to converting electrospun polyacrylonitrile (PAN) nanofiber bundles into rovings, essential for nanofiber yarn spinning, through the implementation of false twisting and drawing processes. The false twisting process is optimized by varying the input bundle angle (40° to 60°), twister type (A, B, C), and rotation speed (20, 50, and 80 rpm). A bundle input angle of 55°, twister type B, and a twister rotation speed of 80 rpm show the best results in terms of longer twisted length, lower average thickness, and thickness variation values. The morphological, physical, and mechanical properties of the resulting nanofiber rovings for drawing process implementation are also evaluated. Scanning electron microscope (SEM) analysis further reveals significant improvements in nanofiber alignment and uniformity. The drawing process reduces the average nanofiber diameter from 297 to 200 nm and decreases the standard deviation of alignment angles from 14.2° to 8.1°, indicating a substantial enhancement in parallel nanofiber alignment. These morphological changes contribute to a marked increase in tensile strength from 2.2 to 3.3 cN tex−1. Integrating false twisting and drawing processes in electrospun nanofiber production can significantly enhance the mechanical properties and alignment of nanofibers, making them more suitable for advanced textile applications.
- 24 February 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (12)
Open AccessProduction of Parallel Aligned Nanofiber Rovings From Continuous Bundles
This study presents a novel approach to converting electrospun polyacrylonitrile (PAN) nanofiber bundles into rovings, essential for nanofiber yarn spinning, through the implementation of false twisting and drawing processes. The false twisting process is optimized by varying the input bundle angle (40° to 60°), twister type (A, B, C), and rotation speed (20, 50, and 80 rpm). A bundle input angle of 55°, twister type B, and a twister rotation speed of 80 rpm show the best results in terms of longer twisted length, lower average thickness, and thickness variation values. The morphological, physical, and mechanical properties of the resulting nanofiber rovings for drawing process implementation are also evaluated. Scanning electron microscope (SEM) analysis further reveals significant improvements in nanofiber alignment and uniformity. The drawing process reduces the average nanofiber diameter from 297 to 200 nm and decreases the standard deviation of alignment angles from 14.2° to 8.1°, indicating a substantial enhancement in parallel nanofiber alignment. These morphological changes contribute to a marked increase in tensile strength from 2.2 to 3.3 cN tex−1. Integrating false twisting and drawing processes in electrospun nanofiber production can significantly enhance the mechanical properties and alignment of nanofibers, making them more suitable for advanced textile applications.
- Open Access
- 27 August 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (20)
Continuous Nanofiber Bundle Production Using Helical Spinnerets with Different Configurations in Needleless Electrospinning
This study investigates the production of continuous nanofiber bundles using needleless electrospinning with a focus on helical spinneret configurations. It delves into the effects of spinneret diameter, pitch length, and thickness on nanofiber bundle characteristics, employing polyacrylonitrile as the polymer. The research highlights the significant impact of these parameters on the nanofiber morphology, bundle width, productivity, and deposition properties of nanofiber bundles. Scanning electron microscopy imaging, bundle depositions analyses, and electric field modeling with COMSOL Multiphysics are applied for the nanofiber bundles electrospun by helical spinnerets. As the diameter of the spinneret increases, productivity, bundle width, deposition ratio, deposition intensity, and deposition homogeneity are increased significantly. Additionally, an increase in spinneret thickness leads to a decrease in average nanofiber diameter. Specifically, increasing the spinneret diameter from 30 to 50 mm, pitch length from 20 to 40 mm, and reducing thickness from 3 to 1 mm increases productivity by 170%, 72%, and 32%, respectively. As a result of practical and modeling studies on helical spinnerets, the optimized parameters are determined as 1 mm thickness, 40 mm pitch length, and 50 mm diameter.
- 27 August 2024
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (20)
Open AccessContinuous Nanofiber Bundle Production Using Helical Spinnerets with Different Configurations in Needleless Electrospinning
This study investigates the production of continuous nanofiber bundles using needleless electrospinning with a focus on helical spinneret configurations. It delves into the effects of spinneret diameter, pitch length, and thickness on nanofiber bundle characteristics, employing polyacrylonitrile as the polymer. The research highlights the significant impact of these parameters on the nanofiber morphology, bundle width, productivity, and deposition properties of nanofiber bundles. Scanning electron microscopy imaging, bundle depositions analyses, and electric field modeling with COMSOL Multiphysics are applied for the nanofiber bundles electrospun by helical spinnerets. As the diameter of the spinneret increases, productivity, bundle width, deposition ratio, deposition intensity, and deposition homogeneity are increased significantly. Additionally, an increase in spinneret thickness leads to a decrease in average nanofiber diameter. Specifically, increasing the spinneret diameter from 30 to 50 mm, pitch length from 20 to 40 mm, and reducing thickness from 3 to 1 mm increases productivity by 170%, 72%, and 32%, respectively. As a result of practical and modeling studies on helical spinnerets, the optimized parameters are determined as 1 mm thickness, 40 mm pitch length, and 50 mm diameter.
- Open Access
- 30 June 2024
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 12 (2) , 377-383
AKRİLİK LİF İNCELİĞİ VE RELAKSE/RELAKSE OLMAMIŞ KARIŞIM ORANLARININ KAPSAMLI ANALİZİ: İPLİK ÖZELLİKLERİ ÜZERİNE ETKİLERİ
Günümüzde tekstil endüstrisindeki hızlı teknolojik gelişmeler, malzeme bilimi ve tekstil mühendisliği alanlarında derinlemesine araştırmalara olan ihtiyacı artırmaktadır. Tekstil malzemelerinin özelliklerini anlamak ve geliştirmek, endüstriyel uygulamalarda ve günlük yaşamımızda karşılaştığımız tekstil ürünlerinin performansını optimize etmek için kritik öneme sahiptir. Bu çalışma, özellikle farklı incelikteki akrilik liflerin relakse/relakse olmamış karışım oranlarının, iplik özellikleri üzerindeki etkilerini anlamak ve değerlendirmek amacıyla gerçekleştirilmiştir. Çalışmada 1,7 dtex, 2,75 dtex ve 3,3 dtex olmak üzere üç farklı incelikte akrilik liflerinden altı farklı relakse/relakse olmamış karışım oranında (100/0, 80/20, 60/40, 40/60, 20/80 ve 0/100) 18 farklı iplik üretilmiştir. Bu ipliklerin kopma mukavemeti, kopma uzaması (%), iplik düzgünsüzlüğü (CVm, %), ince yer, kalın yer, neps ve tüylülük gibi kritik iplik özellikleri detaylı bir şekilde incelenmiştir. Elde edilen sonuçlar, lif inceliği arttıkça kopma mukavemeti ve kopma uzaması değerlerinin de arttığını göstermiştir. Relakse/relakse olmamış karışımlı ipliklerde, özellikle relakse oranının artması kopma mukavemeti üzerinde ilginç bir eğilim göstermiştir. Ayrıca, karışımlı ipliklerde genel olarak relakse oranı arttıkça iplik hataları azalmıştır.
- 30 June 2024
- Published by Muhendislik Bilimleri ve Tasarim Dergisi in Mühendislik Bilimleri ve Tasarım Dergisi
- Vol. 12 (2) , 377-383
Open AccessAKRİLİK LİF İNCELİĞİ VE RELAKSE/RELAKSE OLMAMIŞ KARIŞIM ORANLARININ KAPSAMLI ANALİZİ: İPLİK ÖZELLİKLERİ ÜZERİNE ETKİLERİ
Günümüzde tekstil endüstrisindeki hızlı teknolojik gelişmeler, malzeme bilimi ve tekstil mühendisliği alanlarında derinlemesine araştırmalara olan ihtiyacı artırmaktadır. Tekstil malzemelerinin özelliklerini anlamak ve geliştirmek, endüstriyel uygulamalarda ve günlük yaşamımızda karşılaştığımız tekstil ürünlerinin performansını optimize etmek için kritik öneme sahiptir. Bu çalışma, özellikle farklı incelikteki akrilik liflerin relakse/relakse olmamış karışım oranlarının, iplik özellikleri üzerindeki etkilerini anlamak ve değerlendirmek amacıyla gerçekleştirilmiştir. Çalışmada 1,7 dtex, 2,75 dtex ve 3,3 dtex olmak üzere üç farklı incelikte akrilik liflerinden altı farklı relakse/relakse olmamış karışım oranında (100/0, 80/20, 60/40, 40/60, 20/80 ve 0/100) 18 farklı iplik üretilmiştir. Bu ipliklerin kopma mukavemeti, kopma uzaması (%), iplik düzgünsüzlüğü (CVm, %), ince yer, kalın yer, neps ve tüylülük gibi kritik iplik özellikleri detaylı bir şekilde incelenmiştir. Elde edilen sonuçlar, lif inceliği arttıkça kopma mukavemeti ve kopma uzaması değerlerinin de arttığını göstermiştir. Relakse/relakse olmamış karışımlı ipliklerde, özellikle relakse oranının artması kopma mukavemeti üzerinde ilginç bir eğilim göstermiştir. Ayrıca, karışımlı ipliklerde genel olarak relakse oranı arttıkça iplik hataları azalmıştır.
- Open Access
- 31 May 2024
- Published by Orclever Science and Research Group in The European Journal of Research and Development
- Vol. 4 (2) , 174-186
Investigation of Mechanical and Liquid Transmission Properties of Hydroentangled Nonwovens Containing Segmented Pie Bicomponent Fibers
The aim of this study is to investigate the performance properties (tensile strength, elongation, liquid strike through time, wetback and liquid absorption capacity) of hydroentangled nonwovens containing segmented pie bicomponent fibers. Within the scope of the study, different water jet pressures were used to investigate the effect of performance properties of nonwovens containing 8 segmented pie bicomponent (PET/PA) fibers on process variables such as water jet pressure. On the other hand, three different basis weights (30 g/m2, 45 g/m2, 60 g/m2) were produced on the same (apertured) pattern. The test results show that the water jet pressure affects the mechanical and liquid transmission properties of nonwovens containing 8 segmented pie bicomponent fibers. For products with the same basis weight and different water jet pressures, it was found that the tensile strength and elongation values increased as the water jet pressure increased. In addition, the liquid strike through time decreased as the jet pressure increased, while the liquid absorption capacity and wetback values increased. For the samples with the different basis weights, it was found that the liquid strike through time and liquid absorption capacity values decreased, and wetback values increased. In terms of mechanical properties, it was concluded that the tensile strength increased as the fiber content per unit area increased.
- 31 May 2024
- Published by Orclever Science and Research Group in The European Journal of Research and Development
- Vol. 4 (2) , 174-186
Open AccessInvestigation of Mechanical and Liquid Transmission Properties of Hydroentangled Nonwovens Containing Segmented Pie Bicomponent Fibers
The aim of this study is to investigate the performance properties (tensile strength, elongation, liquid strike through time, wetback and liquid absorption capacity) of hydroentangled nonwovens containing segmented pie bicomponent fibers. Within the scope of the study, different water jet pressures were used to investigate the effect of performance properties of nonwovens containing 8 segmented pie bicomponent (PET/PA) fibers on process variables such as water jet pressure. On the other hand, three different basis weights (30 g/m2, 45 g/m2, 60 g/m2) were produced on the same (apertured) pattern. The test results show that the water jet pressure affects the mechanical and liquid transmission properties of nonwovens containing 8 segmented pie bicomponent fibers. For products with the same basis weight and different water jet pressures, it was found that the tensile strength and elongation values increased as the water jet pressure increased. In addition, the liquid strike through time decreased as the jet pressure increased, while the liquid absorption capacity and wetback values increased. For the samples with the different basis weights, it was found that the liquid strike through time and liquid absorption capacity values decreased, and wetback values increased. In terms of mechanical properties, it was concluded that the tensile strength increased as the fiber content per unit area increased.
- 31 March 2023
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (1) , 1-8
Characterization and Antibacterial Activity of Electrospun Polyethylene oxide/Chitosan Nanofibers
This study aims to characterize and evaluate polyethylene oxide (PEO) and chitosan (CS) nanofibers produced by electrospinning method. Electrospinning solutions were used at three different concentrations (1, 2, 3 wt%) with five different PEO/CS mixing ratios (30/70, 40/60, 50/50, 60/40, 100/0). FESEM, XRD and FTIR tests were applied for characterization of the nanofibers. Antibacterial activity of the nanofibers against Staphylococcus aureus and Klebsiella pneumoniae microorganisms was investigated using disk diffusion method. While 1 wt% of concentration was not suitable to obtain regular nanofibers, the nanofibers were uniform and largely free of beads at the other ones (2, 3 wt%). The average diameters of the nanofibers varied from 59 to 298 nm depending on the concentration and mixing ratio. Strong hydrogen bonds were formed between two polymers, while the crystal structure of PEO did not change significantly when mixed with chitosan. The PEO/CS nanofibers showed no resistance to the selected bacteria.
- 31 March 2023
- Published by Tekstil Ve Konfeksiyon in TEKSTİL VE KONFEKSİYON
- Vol. 33 (1) , 1-8
Characterization and Antibacterial Activity of Electrospun Polyethylene oxide/Chitosan Nanofibers
This study aims to characterize and evaluate polyethylene oxide (PEO) and chitosan (CS) nanofibers produced by electrospinning method. Electrospinning solutions were used at three different concentrations (1, 2, 3 wt%) with five different PEO/CS mixing ratios (30/70, 40/60, 50/50, 60/40, 100/0). FESEM, XRD and FTIR tests were applied for characterization of the nanofibers. Antibacterial activity of the nanofibers against Staphylococcus aureus and Klebsiella pneumoniae microorganisms was investigated using disk diffusion method. While 1 wt% of concentration was not suitable to obtain regular nanofibers, the nanofibers were uniform and largely free of beads at the other ones (2, 3 wt%). The average diameters of the nanofibers varied from 59 to 298 nm depending on the concentration and mixing ratio. Strong hydrogen bonds were formed between two polymers, while the crystal structure of PEO did not change significantly when mixed with chitosan. The PEO/CS nanofibers showed no resistance to the selected bacteria.
- 7 February 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (4) , 2570-2581
Research of a Thermal-Regulation System Using Electronic Integrated Textiles for a Mattress
With the advent of wearable technology, sleep monitoring has become a common practice. Our performance is significantly impacted by the quantity, efficiency, and quality of our sleep. It proved that temperature has a significant impact on sleep. The temperature circumstance is one of the primary causes of sleep disturbance according to the studies. The purpose of this study is to develop a temperature-controlled mattress system that will improve sleep quality by keeping the temperature within a predetermined range. A scaled prototype was set up and tested. It was found that the mattress system could keep the temperature within the specified range without being influenced by the ambient temperature.
- 7 February 2023
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 51 (4) , 2570-2581
Research of a Thermal-Regulation System Using Electronic Integrated Textiles for a Mattress
With the advent of wearable technology, sleep monitoring has become a common practice. Our performance is significantly impacted by the quantity, efficiency, and quality of our sleep. It proved that temperature has a significant impact on sleep. The temperature circumstance is one of the primary causes of sleep disturbance according to the studies. The purpose of this study is to develop a temperature-controlled mattress system that will improve sleep quality by keeping the temperature within a predetermined range. A scaled prototype was set up and tested. It was found that the mattress system could keep the temperature within the specified range without being influenced by the ambient temperature.