Shengwen Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shengwen Yang has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Yanjun Ye
Southwest Forestry Univ, Sch Machinery & Transportat, Kunming 650224, Peoples R China
2 shared publications- Chenhao Qian
College of Machinery and Transportation, Southwest Forestry University, Kunming 650000, China
1 shared publication - Chien-Lung Liang
Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan
1 shared publication - Chong Peng
Dalian University of Technology
1 shared publication - Di Wang
Yunnan Institute of Transportation Science Co., Ltd., Kunming, China
1 shared publication - Haobo Zhang
School of Mechanical and Transportation Engineering, Southwest Forestry University, Kunming, China
1 shared publication
Latest Publications
- 11 August 2026
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 20 (10) , 565
A calibration-free wheelbase-based framework for vehicle speed estimation in accident scenarios using monocular videos
- 11 August 2026
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 20 (10) , 565
A calibration-free wheelbase-based framework for vehicle speed estimation in accident scenarios using monocular videos
- 17 November 2024
- Published by Elsevier in Physica A: Statistical Mechanics and its Applications
- Vol. 657
A time scale measurement method for dynamic temporal networks
- 17 November 2024
- Published by Elsevier in Physica A: Statistical Mechanics and its Applications
- Vol. 657
A time scale measurement method for dynamic temporal networks
- Open Access
- 1 January 2024
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2024 (1)
Impact of Driver Compliance and Aggressiveness in Connected Vehicles on Mixed Traffic Flow Efficiency: A Simulation Study
Connected vehicles (CVs) are becoming increasingly prevalent in today’s transportation systems, and understanding their behavior in mixed traffic flow is crucial for enhancing traffic efficiency and safety. This paper presents a comprehensive study investigating the impact of CV drivers’ compliance and aggressiveness on mixed traffic flow through simulation experiments. The unique contribution of this research lies in the adoption of a clustering method to classify CV drivers’ compliance and aggressiveness based on trajectory data captured by Unmanned Aerial Vehicles (UAVs). This approach allows for the accurate calibration of car‐following and lane‐changing models, surpassing previous methodologies. The study outlines two primary methods: the intelligent driver model (IDM) with driver compliance (CVs‐IDM) and the lane‐change 2013 model with drivers’ style. These methods are applied to simulate various scenarios of mixed traffic flow, considering different CV penetration rates and driver types. The pivotal findings reveal that higher CV penetration rates lead to reduced traffic flow disturbance, improved safety, and enhanced efficiency. Specifically, CV drivers exhibiting high compliance and normal aggressiveness demonstrate optimal performance in terms of disturbance reduction, safety, and overall efficiency. This research offers valuable insights for policymakers and practitioners. It recommends increasing the CV penetration rate in mixed traffic flow to enhance overall efficiency. Moreover, selecting the appropriate CV driver type based on the penetration rate can further optimize traffic flow, positively impacting transportation systems and promoting safer and more efficient mixed traffic environments.
- 1 January 2024
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2024 (1)
Open AccessImpact of Driver Compliance and Aggressiveness in Connected Vehicles on Mixed Traffic Flow Efficiency: A Simulation Study
Connected vehicles (CVs) are becoming increasingly prevalent in today’s transportation systems, and understanding their behavior in mixed traffic flow is crucial for enhancing traffic efficiency and safety. This paper presents a comprehensive study investigating the impact of CV drivers’ compliance and aggressiveness on mixed traffic flow through simulation experiments. The unique contribution of this research lies in the adoption of a clustering method to classify CV drivers’ compliance and aggressiveness based on trajectory data captured by Unmanned Aerial Vehicles (UAVs). This approach allows for the accurate calibration of car‐following and lane‐changing models, surpassing previous methodologies. The study outlines two primary methods: the intelligent driver model (IDM) with driver compliance (CVs‐IDM) and the lane‐change 2013 model with drivers’ style. These methods are applied to simulate various scenarios of mixed traffic flow, considering different CV penetration rates and driver types. The pivotal findings reveal that higher CV penetration rates lead to reduced traffic flow disturbance, improved safety, and enhanced efficiency. Specifically, CV drivers exhibiting high compliance and normal aggressiveness demonstrate optimal performance in terms of disturbance reduction, safety, and overall efficiency. This research offers valuable insights for policymakers and practitioners. It recommends increasing the CV penetration rate in mixed traffic flow to enhance overall efficiency. Moreover, selecting the appropriate CV driver type based on the penetration rate can further optimize traffic flow, positively impacting transportation systems and promoting safer and more efficient mixed traffic environments.
- Open Access
- 23 March 2023
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2023 (1) , 1-15
Measurement Method of Comprehensive Transportation Development Quality Based on Transportation Efficiency
Transportation is the forerunner of economic and social development. Therefore, the high-quality development of comprehensive transportation is of great significance to ensure overall economic and social progress and the smooth implementation of major national strategies. The essence of high-quality development in transportation is to realize the optimal allocation of transportation resources. This study handles two aspects. First, the factors that reflect the quality of comprehensive transportation development are defined and analyzed, and an evaluation system is proposed to build China’s comprehensive transportation development quality with transportation efficiency as the core is proposed, taking into account transportation infrastructure and transportation scale. Second, the static comprehensive evaluation value is calculated by the entropy weight method, and then the incentive control model is constructed by introducing incentive factors to achieve a dynamic comprehensive evaluation of comprehensive transportation development. The research results not only propose new indicators but also evaluate different modes of transportation within the same dimension. The results show that the quality of comprehensive transportation development in China is generally on the rise, but there are obvious regional differences. The proposed model is derived from evaluation cases in transportation-related fields and has not yet been applied in the transportation field. It can help understand the development status of the industry and assist in policy formulation.
- 23 March 2023
- Published by Wiley in Journal of Advanced Transportation
- Vol. 2023 (1) , 1-15
Open AccessMeasurement Method of Comprehensive Transportation Development Quality Based on Transportation Efficiency
Transportation is the forerunner of economic and social development. Therefore, the high-quality development of comprehensive transportation is of great significance to ensure overall economic and social progress and the smooth implementation of major national strategies. The essence of high-quality development in transportation is to realize the optimal allocation of transportation resources. This study handles two aspects. First, the factors that reflect the quality of comprehensive transportation development are defined and analyzed, and an evaluation system is proposed to build China’s comprehensive transportation development quality with transportation efficiency as the core is proposed, taking into account transportation infrastructure and transportation scale. Second, the static comprehensive evaluation value is calculated by the entropy weight method, and then the incentive control model is constructed by introducing incentive factors to achieve a dynamic comprehensive evaluation of comprehensive transportation development. The research results not only propose new indicators but also evaluate different modes of transportation within the same dimension. The results show that the quality of comprehensive transportation development in China is generally on the rise, but there are obvious regional differences. The proposed model is derived from evaluation cases in transportation-related fields and has not yet been applied in the transportation field. It can help understand the development status of the industry and assist in policy formulation.
- 1 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 327-333
The Dynamic Behavior of Electromigration in a Novel Cu Tall Pillar/Cu Via Interconnect for Fan-out Packaging
We presented in this article an in situ electromigration behavior in a novel Cu tall pillar/Cu via interconnect. A Cu tall pillar connecting to a single Cu via for joining the fan-out Cu redistribution lines (RDLs) was introduced for high-power device applications. The novelty of this study was to design a special ladder-shaped Cu tall pillar for the purpose of the fan-out effect of high-density electric current. The in situ SEM (scanning electron microscope) microstructure investigation during the electromigration experiment provided interesting information for the reliability evaluation and in-depth mechanism exploration of the electromigration behavior in the novel Cu interconnect. A stepwise electromigration experiment was conducted at an initial 2.5 A electric current, approximately 10 5 to 10 6 A/cm 2 current density for the components in the Cu interconnect, followed by a larger current input of 3 A. Electrons flowed from the fan-out Cu RDL (cathode) through the Cu via to the Cu tall pillar and the connecting Cu line (anode). The investigations revealed the dynamic void nucleation and coalescence phenomena in the cathodic Cu via during the early stage electromigration. Cu consumption due to the surface diffusion mechanism also occurred on the sidewall of the Cu via. Grain rotation within the Cu interconnect as a result of the electromigration-induced toque was also observed. The considerable mass loss in the Cu via upon electromigration caused a near-collapse microstructure of the Cu interconnect, leading to a potential reliability concern. Electromigration also induced the formation of Cu hillocks on the anodic Cu line, revealing a typical polarity effect. The Cu hillocks were derived from the predominant consumption of the Cu tall pillar rather than the Cu via or the Cu RDL due to the critical mass transport. The voids formed within the Cu tall pillar mostly appeared with a triple junction grain boundary morphology for the Cu consumption, suggesting a grain-boundary-related Cu migration mechanism. The grain boundary diffusion phenomenon was proposed to be the predominant mechanism for explaining the electromigration-induced void and hillock formation in the novel Cu tall pillar/Cu via interconnect.
- 1 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 5, 327-333
The Dynamic Behavior of Electromigration in a Novel Cu Tall Pillar/Cu Via Interconnect for Fan-out Packaging
We presented in this article an in situ electromigration behavior in a novel Cu tall pillar/Cu via interconnect. A Cu tall pillar connecting to a single Cu via for joining the fan-out Cu redistribution lines (RDLs) was introduced for high-power device applications. The novelty of this study was to design a special ladder-shaped Cu tall pillar for the purpose of the fan-out effect of high-density electric current. The in situ SEM (scanning electron microscope) microstructure investigation during the electromigration experiment provided interesting information for the reliability evaluation and in-depth mechanism exploration of the electromigration behavior in the novel Cu interconnect. A stepwise electromigration experiment was conducted at an initial 2.5 A electric current, approximately 10 5 to 10 6 A/cm 2 current density for the components in the Cu interconnect, followed by a larger current input of 3 A. Electrons flowed from the fan-out Cu RDL (cathode) through the Cu via to the Cu tall pillar and the connecting Cu line (anode). The investigations revealed the dynamic void nucleation and coalescence phenomena in the cathodic Cu via during the early stage electromigration. Cu consumption due to the surface diffusion mechanism also occurred on the sidewall of the Cu via. Grain rotation within the Cu interconnect as a result of the electromigration-induced toque was also observed. The considerable mass loss in the Cu via upon electromigration caused a near-collapse microstructure of the Cu interconnect, leading to a potential reliability concern. Electromigration also induced the formation of Cu hillocks on the anodic Cu line, revealing a typical polarity effect. The Cu hillocks were derived from the predominant consumption of the Cu tall pillar rather than the Cu via or the Cu RDL due to the critical mass transport. The voids formed within the Cu tall pillar mostly appeared with a triple junction grain boundary morphology for the Cu consumption, suggesting a grain-boundary-related Cu migration mechanism. The grain boundary diffusion phenomenon was proposed to be the predominant mechanism for explaining the electromigration-induced void and hillock formation in the novel Cu tall pillar/Cu via interconnect.
- Open Access
- 1 April 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1865 (3) , 032058
Research and Application of Comprehensive Evaluation of Engineering Sweet Spot in Block LX
Block LX is a tight sandstone gas reservoir with low porosity and low permeability, and there are the problems of a sharp decline in production and a poor utilization degree of superimposed reserves in the longitudinal gas bearing sand body within a few years after the initial fracturing, which leads to the difficulty of gas field production replacement under the condition of high comprehensive decline rate. By analysing the effect of reservoir characteristics and rock mechanical properties on volumetric fracturing, combined with geological logging data and rock mechanics experimental data of tight sandstone reservoir in Block LX, the paper tries to study the adaptive effect of volumetric fracturing technology in Block LX. The adaptability of volumetric fracturing is evaluated by software simulation of fracturing effect to determine the optimal fracturing construction parameters before the volumetric fracturing gas test is carried out on three wells. The gas test results show that the daily gas production is increased by more than 46.01% compared with that before volumetric fracturing, and the fracturing effect is good. Therefore, it is feasible to use volumetric fracturing technology to overcome the difficulty of low permeability and low gap in Block LX to improve gas production.
- 1 April 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1865 (3) , 032058
Open AccessResearch and Application of Comprehensive Evaluation of Engineering Sweet Spot in Block LX
Block LX is a tight sandstone gas reservoir with low porosity and low permeability, and there are the problems of a sharp decline in production and a poor utilization degree of superimposed reserves in the longitudinal gas bearing sand body within a few years after the initial fracturing, which leads to the difficulty of gas field production replacement under the condition of high comprehensive decline rate. By analysing the effect of reservoir characteristics and rock mechanical properties on volumetric fracturing, combined with geological logging data and rock mechanics experimental data of tight sandstone reservoir in Block LX, the paper tries to study the adaptive effect of volumetric fracturing technology in Block LX. The adaptability of volumetric fracturing is evaluated by software simulation of fracturing effect to determine the optimal fracturing construction parameters before the volumetric fracturing gas test is carried out on three wells. The gas test results show that the daily gas production is increased by more than 46.01% compared with that before volumetric fracturing, and the fracturing effect is good. Therefore, it is feasible to use volumetric fracturing technology to overcome the difficulty of low permeability and low gap in Block LX to improve gas production.
- 1 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 116, 642-645
Research on Risk Assessment of Vehicle Failsafe
Traffic accidents caused by operating passenger cars have brought huge losses to society. With the rapid growth of my country's road transport passenger volume, it is essential to improve road safety. The failure of the braking system is one of the important factors leading to traffic accidents in operating passenger cars. This study first summarizes the main types of failures of the passenger car braking system, and then discusses the causes. A risk assessment method of brake system failure factors based on the hierarchy-fuzzy synthesis method is proposed. The classification and risk score calculation of brake system failures of different severity are carried out. Finally, combined with the maintenance records of operating vehicles, a comparison and summary of the occurrence of failures are made. The research results can provide a theoretical basis for the prevention of accidents due to vehicle breakdowns. It is of great significance to improve the level of road safety in our country and ensure the safety of vehicles.
- 1 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 116, 642-645
Research on Risk Assessment of Vehicle Failsafe
Traffic accidents caused by operating passenger cars have brought huge losses to society. With the rapid growth of my country's road transport passenger volume, it is essential to improve road safety. The failure of the braking system is one of the important factors leading to traffic accidents in operating passenger cars. This study first summarizes the main types of failures of the passenger car braking system, and then discusses the causes. A risk assessment method of brake system failure factors based on the hierarchy-fuzzy synthesis method is proposed. The classification and risk score calculation of brake system failures of different severity are carried out. Finally, combined with the maintenance records of operating vehicles, a comparison and summary of the occurrence of failures are made. The research results can provide a theoretical basis for the prevention of accidents due to vehicle breakdowns. It is of great significance to improve the level of road safety in our country and ensure the safety of vehicles.