SHSebastian A. Hallweger

Sebastian A. Hallweger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sebastian A. Hallweger has a total of 85 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Fine-Tuning the Pressure Response and Mechanical Properties of Azobenzene- and Stilbene-Based Zr-Metal–Organic Frameworks through Multivariate Design

    by Ardeshir Dadgar Yeganeh, Sebastian A. Hallweger, Jonas Tittel, Wim Temmerman, Shun Tokuda, Veronique Van Speybroeck, Evelyn Ploetz, Gregor Kieslich, Simon Krause

    The rich chemistry of molecular framework materials enables precise control of physico-chemical properties through structural design of framework topology and underlying building blocks. Here, we demonstrate the tuning of mechanical properties in a series of mixed-linker Zr-based MOFs incorporating azobenzene- and stilbene-based linkers. We synthesized a series of highly porous mixed-linker MOFs and confirmed formation of solid-solutions with random linker mixing using hyperspectral Raman imaging and powder X-ray diffraction (PXRD). We further investigate the linker disorder in a mixed-linker system by single-crystal X-ray diffraction (SCXRD). Using high-pressure PXRD and molecular simulations, we probed the pressure response across this series and show that the bulk modulus can be finely tuned between 9 and 5 GPa by varying linker composition. This multivariate design strategy offers a versatile route to tailor the pressure response of framework materials and may enable counterintuitive mechanical properties in future systems.


  • Open Access

    Cooperative Herringbone Hinging and Columnar Shifts in Perovskite‐Related Coordination Polymers

    by Sebastian A. Hallweger, Gregor Kieslich

    Casting a material’s structure into structural degrees of freedom (DOFs), elementary structural features that govern the material’s response to external stimuli, is a powerful concept for rationalizing material responsiveness. Elevating this concept into a materials design strategy requires both the discovery of new DOFs and a clear understanding of how their interplay generates emergent properties. In this work, we expand the family of perovskite‐related dicyanamide‐based ( A 2+ )(Mn(C 2 N 3 ) 3 ) 2 coordination polymers by introducing phosphonium‐based divalent A 2+ cations into the BX 3 − framework and show how the cooperative interaction between DOFs leads to biaxial negative thermal expansion (NTE). The materials contain two key DOFs. One DOF originates from the geometric arrangement of the A 2+ cations within the 3D ((Mn(C 2 N 3 ) 3 ) 2 ) 2− ReO 3 ‐type network. The second DOF arises from translational columnar shifts. These two DOFs act cooperatively so that columnar shifts induce herringbone‐type hinging of the A 2+ cations and, overall, causing biaxial NTE. The strength and character of this cooperativity are highly sensitive to subtle modifications of the A 2+ cation such as rigidification through the introduction of a double bond. The results provide a compelling blueprint for engineering material responsiveness through the deliberate design of cooperative structural DOFs.

  • Open Access

    High-pressure powder x-ray diffraction cell for soft materials

    by Lukas Sippach, Henrique Geraissate, Sebastian A. Hallweger, Arne Meyer, Alexander Schoekel, Martin Etter, Anita Ehnes, Gregor Kieslich

    A new high-pressure powder x-ray diffraction (HP-PXRD) cell has been developed for the characterization of soft crystalline materials under quasi-hydrostatic pressures up to 0.8 GPa. The cell facilitates HP-PXRD measurements with pressure increments of 50 bar and is compatible with automated cyclic measurement protocols. Its high resolution in the low-pressure regime renders the setup particularly suitable for soft, highly compressible materials such as metal–organic frameworks, dense coordination polymers, and molecular crystals. The performance of the cell is demonstrated using Ni(dmg)2 (dmg = dimethylglyoximate) as a benchmark, allowing direct comparison of the setup with established literature values. The modular design allows for future extensions that integrate additional analytical techniques, paving the way for new opportunities in the area of high-pressure research on soft materials.

  • Open Access

    Evidence for an Electronically Driven Charge Density Wave in a 1D Metallic MOF

    by Jewel Ryu, Lukas Sippach, Sebastian A. Hallweger, Lukáš Palatinus, Peter Müller, Konstantin Glazyrin, Gregor Kieslich, Julius J. Oppenheim, Mircea Dincă

    Charge density wave (CDW) phases are unconventional quantum states that often arise in low-dimensional metallic systems and are themselves found alongside other exotic phenomena. Finding such states in porous materials is exceedingly rare. In fact, [Ln­(NO3)1–x ]3(HOTP)2 (Ln = La, Nd; H6HOTP = 2,3,6,7,10,11-hexahydroxytriphenylene; LnHOTP) is the only example of a porous material wherein a CDW state has been proposed on the basis of a structural modulation. However, whether the modulation is trivial, and thus purely structural in nature, or it stems from a CDW, and thus has electronic origin, remains unknown. Here, low-temperature and high-pressure crystallography provide evidence for an electronic origin of the CDW phase in a series of LnHOTP (Ln = La, Ce, Pr, Nd, and Sm) MOFs, including the original La and Nd materials. We show that the modulation affects the relative rotation of neighboring HOTP ligands, and that the magnitude of the wavevector that defines the modulation, q, is sensitive to pressure. Importantly, the wavevector exhibits commensurability lock-in at one-third of the c unit cell parameter, q = 1/3 c, providing key evidence for energetic stabilization of the CDW phase.


  • Open Access

    Evidence for an electronically-driven CDW in a 1D metallic MOF

    by Jewel Ryu, Lukas Sippach, Sebastian A. Hallweger, Lukáš Palatinus, Peter Müller, Konstantin Glazyrin, Gregor Kieslich, Julius J. Oppenheim, Mircea Dincă

    Charge density wave (CDW) phases are unconventional quantum states that often arise in low-dimensional metallic systems and are themselves found alongside other exotic phenomena. Finding such states in porous materials is exceedingly rare. In fact, [Ln(NO 3 ) 1-x ] 3 (HOTP) 2 (Ln = La, Nd; H 6 HOTP = 2,3,6,7,10,11- hexahydroxytriphenylene; LnHOTP ) is the only example of a porous material wherein a CDW state has been proposed on the basis of a structural modulation. However, whether the modulation is trivial, and thus purely structural in nature, or it stems from a CDW, and thus has electronic origin, remains unknown. Here, low-temperature and high-pressure crystallography provide evidence for an electronic origin of the CDW phase in a series of LnHOTP (Ln = La, Ce, Pr, Nd, and Sm) MOFs, including the original La and Nd materials. We show that the modulation affects the relative rotation of neighboring HOTP ligands, and that the magnitude of the wavevector that defines the modulation, q , is sensitive to pressure. Importantly, the wavevector exhibits commensurability lock-in at one third of the c unit cell parameter, q = 1/3 c , providing key evidence for energetic stabilization of the CDW phase.

  • Open Access

    Aerobic melt-quenching and glass formation in one-dimensional metal–organic hybrids

    by Shruti Kirti, Patrick Schlachta, Sebastian A. Hallweger, Gregor Kieslich, Christoph Hartmann, Bikash Kumar Shaw

    Dicyanamide based one-dimensional hybrid organic–inorganic structures undergo melting upon heating and then vitrify upon quenching to low temperature under aerobic conditions.


  • On the High-Temperature Ca 2+ Conduction in NASICON-Type Ca (1+ x )/2 In x Zr 2– x (PO 4 ) 3

    by Hauke Glück, Alexandra Morscher, Sebastian A. Hallweger, Gregor Kieslich, Wolfgang G. Zeier


  • Effect of Washing on Nickel-Rich Layered Oxides: Methodology to Quantify the Lithium/Proton-Exchange Kinetics, the Inserted Protons, and the Structural Changes

    by Stefan Oswald, Rebecca Wilhelm, Tim Kratky, László Szentmiklósi, Boglárka Maróti, Ildikó Harsányi, Sebastian A. Hallweger, Gregor Kieslich, Sebastian Günther, Hubert Andreas Gasteiger

    Due to their high specific capacity, the market share of nickel-rich layered lithium nickel cobalt manganese oxides (NCMs, LiNi x Co y Mn z O2, x+y+z = 1) as cathode active materials (CAMs) for lithium-ion batteries is constantly growing. With higher nickel content, the available capacity is increased [1]; however, the higher reactivity of nickel increases unwanted contaminants on the surface of the NCM particles [2]. These contaminants comprise lithium salts, which remain from the lithium excess added during the synthesis of the CAM [3] or are formed during improper storage owed to the high sensitivity towards moisture [4]. In the cell, these compounds then lead to extensive gassing upon decomposition during the first charge/discharge cycles [5], to hydrolysis of electrolyte components [6], as well as to impedance build-up and therefore to capacity fading during cell operation [7]. Due to these negative effects, these contaminants are commonly removed by washing the CAM in water; however, this essential process is accompanied by the cation exchange of intercalated near-surface lithium ions from the NCM by protons from the solution when nickel-rich NCMs are exposed to liquid water [8] or to humid air [9]. To reveal the kinetics of this unwanted cation exchange as well as its implications on the electrochemical behavior, a comprehensive study on the exchange process during the washing is presented here for a nickel-rich NCM831205 (LiNi0.83Co0.12Mn0.05O2). In the first part of this work, washed NCM samples were prepared using a variety of process conditions (e.g., washing time, water-to-CAM mass ratio, and washing temperature) [10]. To determine the proton amount being introduced into the CAM and consequently describe the kinetics of the cation exchange, a set of five independent methods is applied, all capable of quantifying the proton amount x H⁺ (in units of mol%) exchanged into the CAM: i) By titrating the washing solution, its concentration of lithium hydroxide c LiOH is determined, what can be converted into x H⁺ of the CAM. ii) Upon irradiation with neutrons, the protons (as well as the atomic nuclei of the metals) in the NCM emit γ-rays with distinct energies, allowing to quantify x H⁺ by prompt-gamma activation analysis (PGAA). iii) Through thermogravimetric analysis coupled with mass spectrometry (TGA-MS), the observed mass loss of the thermal decomposition of the protonated phase up to 450 °C can be converted into x H⁺. iv) As the protonated layered phase converts to a rock-salt-type structure upon heating, the amount of the rock-salt phase of a heated and washed NCM sample is determined by Rietveld refinement of the powder X-ray diffraction (XRD) data, from which x H⁺ was obtained by the ratio of layered and rock-salt-type phase. v) The layer of the delithiated/protonated surface layer is quantified through X-ray photoelectron spectroscopy (XPS). For the differently washed NCM samples, proton amounts between 0.5 mol% and 25 mol% are obtained. Additionally, this study provides insights into the exchange kinetics, the thermal-decomposition mechanism of the protonated phase, as well as the bulk properties, e.g., the change of lattice parameters and the proton distribution within the particles. In the second part of this study [11], the impact of the protonation on the electrochemical behavior of the NCM is illuminated. References: [1] S. Oswald and H. A. Gasteiger, J. Electrochem. Soc. 170 030506 (2023). [2] W. Li, E. M. Erickson, and A. Manthiram, Nature Energy 5 26 (2020). [3] H.-J. Noh, S. Youn, C. S. Yoon, and Y.-K. Sun, J. Power Sources 233 121 (2013). [4] J. Sicklinger, M. Metzger, H. Beyer, D. Pritzl, and H. A. Gasteiger, J. Electrochem. Soc. 166 A2322 (2019). [5] S. Renfrew and B. D. McCloskey, J. Am. Chem. Soc. 139 17853 (2017). [6] M. Metzger, B. Strehle, S. Solchenbach, and H. A. Gasteiger, J. Electrochem. Soc. 163 A1219 (2016). [7] R. Jung, R. Morasch, P. Karayaylali, K. Phillips, F. Maglia, C. Stinner, Y. Shao-Horn, and H. A. Gasteiger, J. Electrochem. Soc. 165 A132 (2018). [8] D. Pritzl, T. Teufl, A.T.S. Freiberg, B. Strehle, J. Sicklinger, H. Sommer, P. Hartmann, and H. A. Gasteiger, J. Electrochem. Soc. 166 A4056 (2019). [9] L. Hartmann, D. Pritzl, H. Beyer, and H. A. Gasteiger, J. Electrochem. Soc. 168 070507 (2021). [10] S. Oswald, R. Wilhelm, T. Kratky, L. Szentmiklósi, B. Maróti, I. Harsányi, S. A. Hallweger, G. Kieslich, S. Günther, and H. A. Gasteiger, J. Mater. Chem. A 12 25140 (2024). [11] R. Wilhelm, S. Oswald, S. Helmer, and H. A. Gasteiger, in preparation. Figure 1

  • Open Access

    Elucidating the Solubility Enhancement of Active Pharmaceutical Ingredients through Hydrotropy: A Case of Local Anesthetics

    by Sahar Nasrallah, Alexander Wendler, Sebastian A. Hallweger, Gregor Kieslich, Mirjana Minceva

    Hydrotropy has emerged as a promising approach to enhance the solubility and the availability of hydrophobic active pharmaceutical ingredients (APIs). To understand the hydrotropic effect on API solubility, it is crucial to investigate the molecular interactions and phase behavior in the API-hydrotrope-water system. The solid-liquid equilibrium (SLE) phase diagram of the ternary system aids in quantifying the hydrotropic effect and can guide the selection of an effective hydrotrope and its concentration. However, experimental determination of the complete SLE phase diagram at different temperatures is challenging and labor-intensive. This study introduces a thermodynamic-based method for selecting hydrotropes to enhance the solubility of APIs in water, considering API-hydrotrope, API-water, and hydrotrope-water interactions. The approach was demonstrated using three APIs, lidocaine, procaine, and benzocaine, and three hydrotropes, nicotinamide, caffeine, and urea. The SLE phase diagram of the ternary API-hydrotrope-water systems was predicted using the melting properties of the system components and their activity coefficients in the liquid solution, calculated with the nonrandom two-liquid (NRTL) model. The NRTL model binary interaction parameters were obtained from experimental SLE data for API-hydrotrope, API-water, and hydrotrope-water binary systems. The predicted SLE diagrams of the ternary API-hydrotrope-water systems revealed that the studied systems are eutectic systems with maximum API solubility at the eutectic point. Moreover, the thermodynamic analysis has shown that an efficient hydrotrope strongly interacts with API and water, with nicotinamide yielding the highest API solubility enhancement for the studied systems. This study highlights the potential of thermodynamic modeling in guiding the selection of hydrotropes and their concentrations to achieve the targeted API solubility in water.


  • Open Access

    (RPh3P)[Mn(dca)3]: A Family of Glass-Forming Hybrid Organic–Inorganic Materials

    by Bikash Kumar Shaw, Lucia Corti, Joshua M. Tuffnell, Celia Castillo-Blas, Patrick Schlachta, Georgina P. Robertson, Lauren McHugh, Adam F. Sapnik, Sebastian A. Hallweger, Philip A. Chater, et al.

    ABX3-type hybrid organic-inorganic structures have recently emerged as a new class of meltable materials. Here, by the use of phenylphosphonium derivatives as A cation, we study liquid- and glass-forming behavior of a new family of hybrid structures, (RPh3P)[Mn(dca)3] (R = Me, Et, Ph; dca = dicyanamide). These new compounds melt at 196-237 °C (Tm) and then vitrify upon cooling to room temperature, forming glasses. In situ glass formation of this new family of materials was probed on a large scale using a variable-temperature PXRD experiment. Structure analyses of the crystalline and the glasses were carried out by solid-state nuclear magnetic resonance spectroscopy and synchrotron X-ray total scattering techniques for using the pair distribution function. The mechanical properties of the glasses produced were evaluated showing promising durability. Thermal and electrical conductivities showed low thermal conductivities (κ ∼ 0.07-0.09 W m-1 K-1) and moderate electrical conductivities (σ ∼ 10-4-10-6 S m-1) at room temperature, suggesting that by the precise control of the A cation, we can tune meltable hybrid structures from moderate conductors to efficient thermal insulators. Our results raise attention on the practical use of this new hybrid material in applications including, e.g., photovoltaic devices to prevent light-deposited heat (owing to low κRT), energy harvesting thermoelectric, etc., and advance the structure-property understanding.