ATAyça Tanriverdi̇

Ayça Tanriverdi̇

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ayça Tanriverdi̇ has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • SUSTAINABLE CuO NANOCATALYST: PHOTOCATALYTIC DEGRADATION OF METHYLENE BLUE AND CRYSTAL VIOLET

    by Ayça Tanrıverdi

    This study reports the green synthesis of CuO nanoparticles (NPs) using mint (Mentha spicata) leaf extract as an environmentally friendly reducing and stabilizing agent. The structural, optical, and photocatalytic properties of the synthesized CuO nanoparticles were systematically investigated. The nanoparticles were characterized by XRD, FE-SEM, FT-IR, and UV-Vis analyses. The results confirmed the formation of nanosized CuO particles with a monoclinic crystal structure and indicated that phytochemical compounds present in the plant extract contributed to the surface stabilization of the nanoparticles. The photocatalytic activity of the synthesized CuO nanoparticles was evaluated through the degradation of methylene blue (MB) and crystal violet (CV) dyes under visible light irradiation using a 300 W xenon lamp. A gradual decrease in dye concentration was observed with increasing irradiation time, and maximum degradation efficiencies of 92.4% for MB and 83.2% for CV were achieved after 105 minutes. Kinetic analysis revealed that the degradation of both dyes followed a pseudo first order reaction model, indicating a surface controlled photocatalytic process. Overall, the findings demonstrate that green synthesized CuO nanoparticles exhibit efficient visible light driven photocatalytic performance and hold significant potential for wastewater treatment and environmental remediation applications.

  • Open Access

    Green Synthesis and Characterization of NiO Nanoparticles using Kenger Gum: Evaluation of Antimicrobial, Antibiofilm and Anticancer Properties

    by Zehra Çiçek, Güney Gürsoy, Esen Çakmak, Saniye Tekerek, Esin Kiray, Ayça Tanriverdi

    In this study, it was aimed to determine the characterization properties of Nickel Oxide nanoparticles (NiO NPs) obtained by green synthesis method using gum Kenger along with their antimicrobial, antibiofilm and anticancer potentials. The morphological and crystalline properties related to the characterization of the obtained NiO NPs were determined by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), UV-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FT-IR) methods. Thermal properties of the NPs were analyzed by Thermogravimetric analysis (TGA, Differential thermal analysis) (DTA) and Derivative Thermogravimetry (DTG). Antimicrobial, antibiofilm tests were performed to evaluate the biological activities of NiO NPs. The anticancer activity of NPs was determined in human neuroblastoma cell line (SH-SY5Y) by cell viability (MTT assay), caspase-3 (Caspase-3/CPP32 Fluorometric Assay), apoptosis/necrosis and cell cycle (Flow cytometry assay) analyses. The crystal structure of the synthesized nanoparticles was confirmed in XRD analysis. FE-SEM analysis revealed that the particle size distribution of NiO NPs predominantly ranged from 20 to 50 nm.When evaluated in terms of biological activities, the obtained NiO NPs were found to be effective against multidrug-resistant bacteria, which have increased in recent years. It exhibited strong antimicrobial activity especially against clinically important strains such as E. coli , P. aeruginosa , A. baumannii and S. aureus . In cytotoxicity assays carried out on SH-SY5Y neuroblastoma cell line, NiO NPs decreased cell viability dose-dependently and the IC 50 value was calculated as 23.26 ± 0.59 µg/mL. Cell cycle assays showed that NiO NPs arrested cells in G0/G1 phase and accordingly suppressed cell proliferation. No significant change was detected in caspase-3 activity, which is an apoptosis marker. However, in apoptosis/necrosis assay, a dose-dependent increase was observed, especially in the rate of necrotic cells. These findings indicate that green synthesized NiO NPs, with their structural properties, may be among the biological agents with strong antimicrobial, antibiofilm and anticancer potential.


  • Open Access

    Synthesis of NiO nanoparticles from Paulownia tomentosa plant extracts via a green synthesis method and antibacterial, antibiofilm and cytotoxicity applications

    by Güney Gürsoy, Zehra Çiçek, Saniye Tekerek, Esin Kiray, Ayça Tanriverdi, Esen Çakmak

    This study revealed the effective production of nickel oxide nanoparticles (NPs) using chelating agents derived from the leaves of Paulownia tomentosa plants and nickel (II) chloride hexahydrate (NiCl2⋅6H2O) as the precursor. Nickel oxide NPs (NiO NPs) have been successfully prepared by a green synthesis method using extracts of P. tomentosa leaves in water. The morphology and crystallinity of the NPs were investigated via X‐ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible spectroscopy (UV–vis), energy‐dispersive X‐ray analysis (EDX), Fourier transform infrared spectroscopy (FT‐IR) and thermogravimetric analysis (TGA). The formation behaviour of NiO NPs and the microstructural and physical properties of the resulting particles were studied. This study additionally investigated the antimicrobial, antibiofilm and cytotoxic effects of NiO NPs. Microstructurally uniform NiO NPs with a nanometre diameter were consistently produced using an eco‐friendly processing approach and exhibited a visible‐range transparency of 89%. The obtained SEM images confirmed the octahedral shape of the NPs. The NiO NPs acquired were found to have potent antimicrobial efficacy against all the other bacterial strains. As a result of their antibiofilm effects on pathogenic Escherichia coli and Pseudomonas aeruginosa bacteria, NiO NPs strongly inhibited these bacteria in a concentration‐dependent manner. In the cytotoxicity study of NiO NPs, a decrease in cell viability was shown to occur depending on the concentration of the cell lines used.


  • Open Access

    Antibacterial and Photocatalytic Activity of Boron-Reinforced TiO2 Produced by Hydrothermal Method

    by Saniye Tekerek, Ayça Tanriverdi̇, Esen Çakmak

    Bu çalışmada bor takviye miktarlarının TiO2 yapı üzerindeki etkileri araştırılarak fotokatalitik ve antibakteriyel özellikleri incelenmiştir. Bor takviyeli TiO2 nanopartikülleri hidrotermal yöntem kullanılarak üretilmiştir. Yapısal karakterizasyonu, X-ışını kırınım spektroskopisi ile yapılmıştır. Taramalı elektron mikroskobu kullanılarak morfolojik karakterizasyonu elde edilmiştir. Bununla birlikte mevcut çalışmada sentezlenen TiO2’in antibakteriyel ve fotokatalitik aktiviteleri incelenmiştir. Antimikrobiyal uygulamada TiO2 nanopartiküllerinin Escherichia coli O157:H7, Staphylococcus aureus, Salmonella enterica gibi çeşitli patojen mikroorganizmalara karşı antibakteriyel aktivite gösterdiği tespit edilmiştir. En fazla inhibitör etki ise önemli bir gıda patojeni olan E. coli O157:H7 bakterisinde görülmüştür. Takviyesiz ve bor takviyeli TiO2 nanopartiküllerinin fotokatalitik incelemeleri UV-C ışıma altında kristal viyole (CV) katyonik boyası kullanılarak yapılmıştır. Kristal viyole boyasının TiO2 tarafından bozunma oranı %54,43 olarak hesaplanmıştır. Elde edilen sonuçlar umut verici olup takviyesiz ve bor takviyeli TiO2 nanopartiküllerinin fotobozunma aktivitesinin yanı sıra biyolojik uygulamalardaki mekanizmalarını tam olarak karakterize edebilmek ve potansiyellerini daha iyi anlamak adına daha ileri çalışmalara ihtiyaç vardır.

  • Open Access

    Production of Boron Doped Zinc Oxide Electrode Using Zinc Nitrate Hexahydrate and Effect on Supercapacitor Performance

    by Ayça Tanriverdi̇, Saniye Tekerek

    Bu çalışmada, bor katkılı çinko oksit (ZnO:B) parçacıklar hidrotermal yöntem ile çinko nitrat hekzahidrat (Zn(NO3)2.6H2O) öncü çözeltisi kullanılarak üretilmiştir. ZnO:B tozlarının sentezinde bor ağırlıkça %5, %10, %15 ve %20 oranlarında katkılanmıştır. Üretilen ZnO:B yapıların fiziksel karakterizasyonu X-ışını kırınımı (XRD) ve taramalı elektron mikroskopu (SEM) ile gerçekleştirilmiştir. Analiz sonuçlarından ZnO:B parçacıkların hekzagonal würtzide yapıda kristalleştiğini ve morfolojik yapılarının hekzagonal çubuk şeklinde olduğu gözlenmiştir. ZnO:B elektrotlar; %10 poli tetra florin etilen (PTFE), %20 iletken grafit ile %70 ZnO:B tozları karıştırılarak Ni köpük üzerine 1 cm2’ lik alan oluşturacak şekilde hazırlanmıştır. ZnO:B elektrotların kapasitans ölçümleri döngüsel voltametrisi (CV) yöntemi ile yapılmıştır. Ölçümler oda sıcaklığında gerçekleştirilip, elektrolit sıvısı olarak 6M KOH çözeltisi kullanılmıştır. Farklı bor oranlarında hazırlanan ZnO:B elektrotların elektrokimyasal özellikleri araştırılmıştır. Üretilen ZnO:B elektrotlarında bor konsantrasyonu arttıkça kapasitans değerlerinin sistematik bir şekilde arttığı gözlemlenmiştir. Ayrıca %20 bor katkılı ZnO parçacıklar kullanılarak elde edilen elektrotun maksimum spesifik kapasitans değerine (29,41 F/g) ulaştığı ve katkısız ZnO elektrota göre 5 kat daha iyi performans sağladığı gözlemlenmiştir.

  • İndirgenmiş Grafen Oksit/Çinko Oksit Kompozitlerin Üretimi ve Süper Kapasitör Uygulamaları

    by Ayça Tanriverdi̇

    Bu çalışmada, indirgenmiş grafen oksit/çinko oksit (RGO/ZnO) kompozit malzemeleri hidrotermal yöntem kullanılarak sentezlenmiştir. Sentezlenen RGO/ZnO kompozitleri, süper kapasitör uygulamaları için elektrot yapımında kullanılmıştır. RGO/ZnO kompozit malzemeler farklı çinko kaynakları (çinko nitrat, çinko klorür ve çinko asesat) kullanılarak üretilip, farklı çinko tuzların RGO/ZnO elektrotların kapasitans değerleri üzerindeki etkisi araştırılmıştır. RGO/ZnO kompozitlerin karakterizasyonu XRD (X-ışını kırınımı) ve SEM (taramalı elektron mikroskopisi) ile gerçekleştirilmiştir. Üretilen RGO/ZnO elektrotların elektrokimyasal özellikleri döngüsel voltametri, elektrokimyasal empedans ve galvanostatik şarj-deşarj testleriyle 6M KOH çözeltisi içinde analiz edilmiştir. Yapılan analizler sonucunda; çinko nitrat tuzu kullanılarak elde edilen RGO/ZnO kompozit malzemesi ile oluşturulan elektrodun maksimum spesifik kapasitans değerine (52,71 F/g) ulaştığı belirlenmiştir.