STSaniye Tekerek

Saniye Tekerek

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Saniye Tekerek has a total of 6 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Green Synthesis and Characterization of NiO Nanoparticles using Kenger Gum: Evaluation of Antimicrobial, Antibiofilm and Anticancer Properties

    by Zehra Çiçek, Güney Gürsoy, Esen Çakmak, Saniye Tekerek, Esin Kiray, Ayça Tanriverdi

    In this study, it was aimed to determine the characterization properties of Nickel Oxide nanoparticles (NiO NPs) obtained by green synthesis method using gum Kenger along with their antimicrobial, antibiofilm and anticancer potentials. The morphological and crystalline properties related to the characterization of the obtained NiO NPs were determined by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), UV-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FT-IR) methods. Thermal properties of the NPs were analyzed by Thermogravimetric analysis (TGA, Differential thermal analysis) (DTA) and Derivative Thermogravimetry (DTG). Antimicrobial, antibiofilm tests were performed to evaluate the biological activities of NiO NPs. The anticancer activity of NPs was determined in human neuroblastoma cell line (SH-SY5Y) by cell viability (MTT assay), caspase-3 (Caspase-3/CPP32 Fluorometric Assay), apoptosis/necrosis and cell cycle (Flow cytometry assay) analyses. The crystal structure of the synthesized nanoparticles was confirmed in XRD analysis. FE-SEM analysis revealed that the particle size distribution of NiO NPs predominantly ranged from 20 to 50 nm.When evaluated in terms of biological activities, the obtained NiO NPs were found to be effective against multidrug-resistant bacteria, which have increased in recent years. It exhibited strong antimicrobial activity especially against clinically important strains such as E. coli , P. aeruginosa , A. baumannii and S. aureus . In cytotoxicity assays carried out on SH-SY5Y neuroblastoma cell line, NiO NPs decreased cell viability dose-dependently and the IC 50 value was calculated as 23.26 ± 0.59 µg/mL. Cell cycle assays showed that NiO NPs arrested cells in G0/G1 phase and accordingly suppressed cell proliferation. No significant change was detected in caspase-3 activity, which is an apoptosis marker. However, in apoptosis/necrosis assay, a dose-dependent increase was observed, especially in the rate of necrotic cells. These findings indicate that green synthesized NiO NPs, with their structural properties, may be among the biological agents with strong antimicrobial, antibiofilm and anticancer potential.


  • Open Access

    Green Synthesis of CuO-TiO₂-ZnO (CuTiZn) Ternary Nanocomposite via Kenger Gum Extract: A Study of their Structure, Characterization, and Biological Applications

    by Saniye Tekerek

    This study presents the synthesis of CuO-TiO₂-ZnO (CuTiZn) ternary nanocomposite via the use of Kenger (Gundelia tournefortii) gum extract as a biogenic reducing and stabilizing agent. The synthesized CuTiZn nanocomposite was characterized via X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). XRD analysis confirmed the formation of a CuO-TiO₂-ZnO nanocomposite with a monoclinic crystal structure. SEM images revealed spherical, well-dispersed particles, whereas FTIR spectra indicated the presence of functional groups from the Kenger gum extract involved in the reduction process. Biological applications, including antibacterial activity against both gram-positive and gram-negative bacteria, were evaluated, yielding promising results. The antimicrobial activity of the biosynthesized ternary nanocomposite was evidenced by the formation of inhibition zones ranging from 13.5 to 18 mm in diameter against both gram-positive and gram-negative bacteria. The antioxidant properties were assessed via DPPH radical scavenging assays, which revealed an inhibition rate of approximately 34% at a concentration of 12.5 mg/mL. In anticancer activity assays, the CuTiZn nanocomposite exhibited an IC₅₀ value of 201.1 µg/mL against the MCF-7 human breast cancer cell line. These findings suggest that the biosynthesized CuTiZn nanocomposite possesses promising antimicrobial, antioxidant, and anticancer properties, highlighting their potential for biomedical applications. This study, for the first time, uses the green synthesis of CuTiZn ternary nanocomposite using Kenger (Gundelia tournefortii) gum agent. This eco-friendly approach not only minimizes toxic reagents but also enables the production of multifunctional nanocomposite with superior antibacterial and cytotoxic performance due to the synergistic effects of the three metal oxides.

  • Evaluation of Radiation Shielding Properties of Hydrothermally Synthesized CuO Nanoparticles Using Monte Carlo FLUKA Simulations

    by Saniye Tekerek

    Copper oxide nanoparticles (CuO NPs) were synthesized at 105 °C via a hydrothermal deposition technique. The CuO nanoparticle structure was characterized via X-ray diffraction (XRD) and scanning electron microscopy (SEM). The optical properties of the nanoparticles were examined via a UV‒vis spectrophotometer. For all the nanoparticles, the XRD measurements revealed the monoclinic CuO phase. The direct optical band and Urbach gap width of the nanoparticles were 2.88 eV and 0.44 eV, respectively. On the basis of optical measurements, optical parameters such as the refractive index (n), extinction coefficient (k), and real (ε1) and imaginary (ε2) components of the dielectric constant were calculated. At a wavelength of 550 nm, the optical constants n and k were found to be 2.75 and 0.00024, respectively, corresponding to dielectric real and imaginary constants of 7.570 and 0.0013. Additionally, photon interactions with CuO NPs at various energy levels were simulated via the FLUKA program. The energy deposition in the material provided valuable information for assessing the radiation shielding capabilities of the investigated material.

  • Open Access

    Synthesis of NiO nanoparticles from Paulownia tomentosa plant extracts via a green synthesis method and antibacterial, antibiofilm and cytotoxicity applications

    by Güney Gürsoy, Zehra Çiçek, Saniye Tekerek, Esin Kiray, Ayça Tanriverdi, Esen Çakmak

    This study revealed the effective production of nickel oxide nanoparticles (NPs) using chelating agents derived from the leaves of Paulownia tomentosa plants and nickel (II) chloride hexahydrate (NiCl2⋅6H2O) as the precursor. Nickel oxide NPs (NiO NPs) have been successfully prepared by a green synthesis method using extracts of P. tomentosa leaves in water. The morphology and crystallinity of the NPs were investigated via X‐ray diffraction (XRD), scanning electron microscopy (SEM), UV–visible spectroscopy (UV–vis), energy‐dispersive X‐ray analysis (EDX), Fourier transform infrared spectroscopy (FT‐IR) and thermogravimetric analysis (TGA). The formation behaviour of NiO NPs and the microstructural and physical properties of the resulting particles were studied. This study additionally investigated the antimicrobial, antibiofilm and cytotoxic effects of NiO NPs. Microstructurally uniform NiO NPs with a nanometre diameter were consistently produced using an eco‐friendly processing approach and exhibited a visible‐range transparency of 89%. The obtained SEM images confirmed the octahedral shape of the NPs. The NiO NPs acquired were found to have potent antimicrobial efficacy against all the other bacterial strains. As a result of their antibiofilm effects on pathogenic Escherichia coli and Pseudomonas aeruginosa bacteria, NiO NPs strongly inhibited these bacteria in a concentration‐dependent manner. In the cytotoxicity study of NiO NPs, a decrease in cell viability was shown to occur depending on the concentration of the cell lines used.


  • Open Access

    Antibacterial and Photocatalytic Activity of Boron-Reinforced TiO2 Produced by Hydrothermal Method

    by Saniye Tekerek, Ayça Tanriverdi̇, Esen Çakmak

    Bu çalışmada bor takviye miktarlarının TiO2 yapı üzerindeki etkileri araştırılarak fotokatalitik ve antibakteriyel özellikleri incelenmiştir. Bor takviyeli TiO2 nanopartikülleri hidrotermal yöntem kullanılarak üretilmiştir. Yapısal karakterizasyonu, X-ışını kırınım spektroskopisi ile yapılmıştır. Taramalı elektron mikroskobu kullanılarak morfolojik karakterizasyonu elde edilmiştir. Bununla birlikte mevcut çalışmada sentezlenen TiO2’in antibakteriyel ve fotokatalitik aktiviteleri incelenmiştir. Antimikrobiyal uygulamada TiO2 nanopartiküllerinin Escherichia coli O157:H7, Staphylococcus aureus, Salmonella enterica gibi çeşitli patojen mikroorganizmalara karşı antibakteriyel aktivite gösterdiği tespit edilmiştir. En fazla inhibitör etki ise önemli bir gıda patojeni olan E. coli O157:H7 bakterisinde görülmüştür. Takviyesiz ve bor takviyeli TiO2 nanopartiküllerinin fotokatalitik incelemeleri UV-C ışıma altında kristal viyole (CV) katyonik boyası kullanılarak yapılmıştır. Kristal viyole boyasının TiO2 tarafından bozunma oranı %54,43 olarak hesaplanmıştır. Elde edilen sonuçlar umut verici olup takviyesiz ve bor takviyeli TiO2 nanopartiküllerinin fotobozunma aktivitesinin yanı sıra biyolojik uygulamalardaki mekanizmalarını tam olarak karakterize edebilmek ve potansiyellerini daha iyi anlamak adına daha ileri çalışmalara ihtiyaç vardır.

  • Open Access

    Production of Boron Doped Zinc Oxide Electrode Using Zinc Nitrate Hexahydrate and Effect on Supercapacitor Performance

    by Ayça Tanriverdi̇, Saniye Tekerek

    Bu çalışmada, bor katkılı çinko oksit (ZnO:B) parçacıklar hidrotermal yöntem ile çinko nitrat hekzahidrat (Zn(NO3)2.6H2O) öncü çözeltisi kullanılarak üretilmiştir. ZnO:B tozlarının sentezinde bor ağırlıkça %5, %10, %15 ve %20 oranlarında katkılanmıştır. Üretilen ZnO:B yapıların fiziksel karakterizasyonu X-ışını kırınımı (XRD) ve taramalı elektron mikroskopu (SEM) ile gerçekleştirilmiştir. Analiz sonuçlarından ZnO:B parçacıkların hekzagonal würtzide yapıda kristalleştiğini ve morfolojik yapılarının hekzagonal çubuk şeklinde olduğu gözlenmiştir. ZnO:B elektrotlar; %10 poli tetra florin etilen (PTFE), %20 iletken grafit ile %70 ZnO:B tozları karıştırılarak Ni köpük üzerine 1 cm2’ lik alan oluşturacak şekilde hazırlanmıştır. ZnO:B elektrotların kapasitans ölçümleri döngüsel voltametrisi (CV) yöntemi ile yapılmıştır. Ölçümler oda sıcaklığında gerçekleştirilip, elektrolit sıvısı olarak 6M KOH çözeltisi kullanılmıştır. Farklı bor oranlarında hazırlanan ZnO:B elektrotların elektrokimyasal özellikleri araştırılmıştır. Üretilen ZnO:B elektrotlarında bor konsantrasyonu arttıkça kapasitans değerlerinin sistematik bir şekilde arttığı gözlemlenmiştir. Ayrıca %20 bor katkılı ZnO parçacıklar kullanılarak elde edilen elektrotun maksimum spesifik kapasitans değerine (29,41 F/g) ulaştığı ve katkısız ZnO elektrota göre 5 kat daha iyi performans sağladığı gözlemlenmiştir.

  • Open Access

    Sprey Pyrolisis Yöntemiyle SnO2:F Camların Üretimi Optiksel Karakterizasyonun Belirlenmesi ve Kütle Soğurma Katsayısının Hesaplanması

    by Saniye Tekerek

    Kimyasal püskürtme yöntemi ile (SnO2:F) kalay oksit flor üretimi yapılmıştır. Bu malzemenin optiksel geçirgenliği UV spektrometre ile ölçülmüştür. Optiksel özelliklerinin ve iletkenliğinin istenilen büyüklüklerde olduğu tespit edilmiştir. XRD görüntüsü alınarak uygun fazda büyüme yaptığı gözlenmiştir. F katkısına bağlı olarak farklı enerjilerde kütle soğurma katsayıları hesaplanmıştır. Hesaplamalar yapılırken Nist WinXcom data programı kullanılmıştır.